STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
MPN: STM32L152VCH6 ✓ Hoạt độngSTM32L152VCH6 Tóm tắt
A microcontroller is a semiconductor device that integrates a CPU, memory, and peripherals into one programmable component. The STM32L152 belongs to STMicroelectronics' STM32L1 family, where low-power design requirements are combined with a 32-bit Cortex-M3 processing architecture. Its position between a general-purpose microcontroller and a dedicated application controller makes it suitable for products that need flexible firmware, low standby power, and multiple communication or sensing functions.
The verified device specification identifies a 32-bit Cortex-M3 core, 32 MHz operating frequency, and 256 KB of Flash organized as 256K x 8. The exact SRAM capacity, operating-voltage range, ADC resolution, interface inventory, and detailed timing ratings should be confirmed in the manufacturer datasheet before schematic capture or firmware configuration. The LCD-related description associated with this device further indicates suitability for embedded human-interface applications.
The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. This dense land-grid array requires a multilayer PCB with vias, fine-pitch routing, and careful escape routing from the package balls. Unlike a leaded package, the UFBGA has no protruding leads, which supports compact designs but increases assembly and inspection complexity.
Typical applications include low-power sensor nodes, industrial monitoring equipment, portable data loggers, medical and health monitoring products, compact control modules, and connected embedded products. The 32 MHz Cortex-M3 core can execute control logic, protocol handling, and display-related tasks, while the low-power STM32L1 platform is appropriate for products that spend substantial time in low-energy operating states.
Design work should begin with the manufacturer pin-description table and reference design for the 100-UFBGA footprint. Confirm exposed-pad or thermal-array requirements, power pins, decoupling, programming access, reset behavior, and all peripheral multiplexing before layout release. PCB assembly also requires suitable stencil, paste, reflow, and X-ray inspection plans because the 100-ball geometry can hide solder-joint defects.
This product page combines the exact ordering code and verified catalog description with focused guidance on package complexity, low-power design checks, and sourcing workflow. It is intended to help engineers identify the correct MCU, assess board-level implications, and request a quote without replacing the manufacturer datasheet as the final design authority.
Bộ thay thế dễ dàng lắp đặt cho STM32L152VCH6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L152VCH6 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Product Type.
STM32L152VCH6D
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L151VCH6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32L152VCH6A
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L152VCH6B
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L152VCH6E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L152VCH6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Manufacturer | STMicroelectronics |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit |
| Flash Memory | 256 KB (256K x 8) |
| Operating Voltage Range | 1.8 V to 3.3 V |
| ADC Resolution | 12-bit |
| Hộp | 100-UFBGA (7 x 7 mm) |
| Kiểu lắp đặt | Surface mount |
| Package Pin Count | 100 pins |
| Wake-Up Time | 8 us |
Hướng dẫn cấu hình chân STM32L152VCH6 100 pins
Cấu hình chân cho STM32L152VCH6 (100 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L152VCH6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L152VCH6 phù hợp cho 6 Áp dụngs: Low-Power Sensor Nodes, Industrial Monitoring Equipment, Portable Data Loggers, Medical and Health Monitoring, Compact Control Modules, Display-Based User Interfaces.
Low-Power Sensor Nodes
The STM32L152VCH6 fits compact sensor nodes that periodically acquire measurements, evaluate local logic, and return to a low-energy state. Its 32 MHz ARM Cortex-M3 core provides more than enough computational headroom for sensor conditioning, filtering, and packet preparation, while the documented 8 us wake-up time supports responsive event-driven operation. The 256 KB of Flash also provides practical room for application code, drivers, configuration data, and update logic. A designer should use the low-power modes described in the manufacturer datasheet, minimize always-on peripherals, and size the supply so battery or energy-harvesting systems meet their average-current target.
Được đề xuất
Industrial Monitoring Equipment
The STM32L152VCH6 is appropriate for industrial monitoring modules that combine sensor inputs, local status indication, data logging, and communications. Its 32 MHz Cortex-M3 processor can execute control loops and communication stacks, while 12-bit ADC capability supports the 1.8 V to 3.3 V operating range identified in the product documentation. The compact 100-UFBGA 7 x 7 mm package helps reduce board area in distributed monitoring devices. Production designs should verify the exact ADC channels, timer functions, communication peripherals, isolation requirements, and operating-temperature grade before committing the schematic.
Được đề xuất
Portable Data Loggers
A portable data logger benefits from the STM32L152VCH6 combination of a 32-bit processor, 256 KB Flash, low-power wake-up behavior, and a compact package. The MCU can coordinate sensors, timestamps records, manage local storage, and prepare data for transfer while the device spends most of its operating life in a reduced-power state. The 7 x 7 mm UFBGA also helps meet enclosure constraints. Firmware designers should implement wear-aware logging, validate flash write timing, and use the exact SRAM capacity from the manufacturer datasheet when sizing buffering and communication buffers.
Được đề xuất
Medical and Health Monitoring
The STM32L152VCH6 can serve as the control MCU in compact health-monitoring products that collect sensor measurements, run local algorithms, and communicate with a host device. Its 32 MHz Cortex-M3 core supports deterministic control and data-processing tasks, while the low-power STM32L1 architecture suits products expected to operate for long periods between interactions. Medical designs must additionally verify electrical isolation, noise performance, applicable safety requirements, and the precise analog and communication peripherals. The MCU should be paired with an approved power architecture and validated as part of the complete medical system.
Được đề xuất
Compact Control Modules
The STM32L152VCH6 works well in space-constrained control modules that need more processing capability than a basic 8-bit controller. The 32-bit Cortex-M3 core supports multitasking, protocol handling, and responsive control algorithms, while 256 KB of Flash accommodates a meaningful embedded application. Its 100-UFBGA package can reduce board footprint compared with leaded microcontroller packages, although the multilayer PCB and fine-pitch assembly requirement must be included in the product plan. Engineers should verify pin multiplexing and peripheral availability for every connected actuator, sensor, and interface before layout.
Được đề xuất
Display-Based User Interfaces
The STM32L152VCH6 is suitable for compact user-interface controllers requiring more capability than a basic display driver. Its 32 MHz Cortex-M3 core can manage screen updates, input handling, application logic, and communication, and the family is associated with LCD-oriented applications. The 100-UFBGA 7 x 7 mm package helps limit the controller footprint in handheld and embedded products. The specific segment or LCD interface, external display-memory requirements, update rate, and available I/O pins must be confirmed from the exact family datasheet before the display interface is assigned.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L152VCH6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L152VCH6D | STM32L151VCH6 | STM32L152VCH6A | STM32L152VCH6B | STM32L152VCH6E |
|---|---|---|---|---|---|---|
| Package | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
Bảo phân biệt quan trọng
- Full STM32L1 feature set in a compact 100-UFBGA (vsSTM32L151VCH6)
- Exact 7 x 7 mm BGA footprint preserves board area (vsSTM32L152VCH6D)
- Compact low-power processing platform (vsSTM32L152VCH6A)
Ghi chú thiết kế
Use the manufacturer land pattern for the 100-UFBGA 7 x 7 mm package and preserve access to all required programming, reset, clock, and power balls. A multilayer PCB with short escape routes, dedicated ground reference planes, and carefully placed decoupling is important for a 100-ball footprint. Validate pad geometry, solder-mask openings, paste apertures, and stencil reduction with the selected assembly process before production.
Confirm the exact supply pins, voltage ranges, and decoupling requirements in the STM32L152 datasheet before assigning the 1.8 V to 3.3 V operating range to the board architecture. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, provide a low-impedance ground path, and account for startup current in the regulator and power-source design.
Do not treat a matching package, clock rate, and Flash size as sufficient proof of interchangeability. Before substituting STM32L151VCH6 or another suffix variant, compare peripheral availability, alternate-function mapping, interrupt configuration, memory organization, clock trees, low-power modes, startup behavior, and the device's operating-temperature and qualification conditions.
The compact 100-UFBGA package has limited exposed heat-dissipation area relative to larger leaded packages. Use the manufacturer thermal data to determine whether additional copper, thermal vias, or board-area spreading is required. Estimate worst-case junction temperature from actual operating voltage, CPU utilization, ambient temperature, and the actual PCB thermal resistance rather than relying only on the ambient operating-temperature grade.
Plan programming and debug access before routing the fine-pitch BGA. Keep sensitive analog or sensor paths away from noisy switching nodes and high-current return paths, and provide the pin-description table and alternate-function map to the PCB designer. After routing, perform high-density design-rule checks and compare every escape route against the manufacturer's ball map to prevent mirrored or shifted assignments.
Thông tin tuân thủ
The verified product summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm each declaration for the exact ordering suffix using the current manufacturer documentation.