STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
MPN: STM32L152VCH6 ✓ सक्रियSTM32L152VCH6 अवलोकन
A microcontroller is a semiconductor device that integrates a CPU, memory, and peripherals into one programmable component. The STM32L152 belongs to STMicroelectronics' STM32L1 family, where low-power design requirements are combined with a 32-bit Cortex-M3 processing architecture. Its position between a general-purpose microcontroller and a dedicated application controller makes it suitable for products that need flexible firmware, low standby power, and multiple communication or sensing functions.
The verified device specification identifies a 32-bit Cortex-M3 core, 32 MHz operating frequency, and 256 KB of Flash organized as 256K x 8. The exact SRAM capacity, operating-voltage range, ADC resolution, interface inventory, and detailed timing ratings should be confirmed in the manufacturer datasheet before schematic capture or firmware configuration. The LCD-related description associated with this device further indicates suitability for embedded human-interface applications.
The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. This dense land-grid array requires a multilayer PCB with vias, fine-pitch routing, and careful escape routing from the package balls. Unlike a leaded package, the UFBGA has no protruding leads, which supports compact designs but increases assembly and inspection complexity.
Typical applications include low-power sensor nodes, industrial monitoring equipment, portable data loggers, medical and health monitoring products, compact control modules, and connected embedded products. The 32 MHz Cortex-M3 core can execute control logic, protocol handling, and display-related tasks, while the low-power STM32L1 platform is appropriate for products that spend substantial time in low-energy operating states.
Design work should begin with the manufacturer pin-description table and reference design for the 100-UFBGA footprint. Confirm exposed-pad or thermal-array requirements, power pins, decoupling, programming access, reset behavior, and all peripheral multiplexing before layout release. PCB assembly also requires suitable stencil, paste, reflow, and X-ray inspection plans because the 100-ball geometry can hide solder-joint defects.
This product page combines the exact ordering code and verified catalog description with focused guidance on package complexity, low-power design checks, and sourcing workflow. It is intended to help engineers identify the correct MCU, assess board-level implications, and request a quote without replacing the manufacturer datasheet as the final design authority.
के लिए ड्रॉप-इन विकल्प STM32L152VCH6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32L152VCH6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Product Type.
STM32L152VCH6D
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L151VCH6
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32L152VCH6A
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L152VCH6B
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L152VCH6E
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L152VCH6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Manufacturer | STMicroelectronics |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit |
| Flash Memory | 256 KB (256K x 8) |
| Operating Voltage Range | 1.8 V to 3.3 V |
| ADC Resolution | 12-bit |
| पैकेज | 100-UFBGA (7 x 7 mm) |
| माउंटिंग प्रकार | Surface mount |
| Package Pin Count | 100 pins |
| Wake-Up Time | 8 us |
STM32L152VCH6 100 pins पिन कॉन्फ़िगरेशन गाइड
STM32L152VCH6 (100 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32L152VCH6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32L152VCH6 के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Power Sensor Nodes, Industrial Monitoring Equipment, Portable Data Loggers, Medical and Health Monitoring, Compact Control Modules, Display-Based User Interfaces.
Low-Power Sensor Nodes
The STM32L152VCH6 fits compact sensor nodes that periodically acquire measurements, evaluate local logic, and return to a low-energy state. Its 32 MHz ARM Cortex-M3 core provides more than enough computational headroom for sensor conditioning, filtering, and packet preparation, while the documented 8 us wake-up time supports responsive event-driven operation. The 256 KB of Flash also provides practical room for application code, drivers, configuration data, and update logic. A designer should use the low-power modes described in the manufacturer datasheet, minimize always-on peripherals, and size the supply so battery or energy-harvesting systems meet their average-current target.
अनुशंसित
Industrial Monitoring Equipment
The STM32L152VCH6 is appropriate for industrial monitoring modules that combine sensor inputs, local status indication, data logging, and communications. Its 32 MHz Cortex-M3 processor can execute control loops and communication stacks, while 12-bit ADC capability supports the 1.8 V to 3.3 V operating range identified in the product documentation. The compact 100-UFBGA 7 x 7 mm package helps reduce board area in distributed monitoring devices. Production designs should verify the exact ADC channels, timer functions, communication peripherals, isolation requirements, and operating-temperature grade before committing the schematic.
अनुशंसित
Portable Data Loggers
A portable data logger benefits from the STM32L152VCH6 combination of a 32-bit processor, 256 KB Flash, low-power wake-up behavior, and a compact package. The MCU can coordinate sensors, timestamps records, manage local storage, and prepare data for transfer while the device spends most of its operating life in a reduced-power state. The 7 x 7 mm UFBGA also helps meet enclosure constraints. Firmware designers should implement wear-aware logging, validate flash write timing, and use the exact SRAM capacity from the manufacturer datasheet when sizing buffering and communication buffers.
अनुशंसित
Medical and Health Monitoring
The STM32L152VCH6 can serve as the control MCU in compact health-monitoring products that collect sensor measurements, run local algorithms, and communicate with a host device. Its 32 MHz Cortex-M3 core supports deterministic control and data-processing tasks, while the low-power STM32L1 architecture suits products expected to operate for long periods between interactions. Medical designs must additionally verify electrical isolation, noise performance, applicable safety requirements, and the precise analog and communication peripherals. The MCU should be paired with an approved power architecture and validated as part of the complete medical system.
अनुशंसित
Compact Control Modules
The STM32L152VCH6 works well in space-constrained control modules that need more processing capability than a basic 8-bit controller. The 32-bit Cortex-M3 core supports multitasking, protocol handling, and responsive control algorithms, while 256 KB of Flash accommodates a meaningful embedded application. Its 100-UFBGA package can reduce board footprint compared with leaded microcontroller packages, although the multilayer PCB and fine-pitch assembly requirement must be included in the product plan. Engineers should verify pin multiplexing and peripheral availability for every connected actuator, sensor, and interface before layout.
अनुशंसित
Display-Based User Interfaces
The STM32L152VCH6 is suitable for compact user-interface controllers requiring more capability than a basic display driver. Its 32 MHz Cortex-M3 core can manage screen updates, input handling, application logic, and communication, and the family is associated with LCD-oriented applications. The 100-UFBGA 7 x 7 mm package helps limit the controller footprint in handheld and embedded products. The specific segment or LCD interface, external display-memory requirements, update rate, and available I/O pins must be confirmed from the exact family datasheet before the display interface is assigned.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32L152VCH6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32L152VCH6D | STM32L151VCH6 | STM32L152VCH6A | STM32L152VCH6B | STM32L152VCH6E |
|---|---|---|---|---|---|---|
| Package | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) | 100-UFBGA (7 x 7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) | 256 KB (256K x 8) |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
मुख्य विशेषताएँ
- Full STM32L1 feature set in a compact 100-UFBGA (बनामSTM32L151VCH6)
- Exact 7 x 7 mm BGA footprint preserves board area (बनामSTM32L152VCH6D)
- Compact low-power processing platform (बनामSTM32L152VCH6A)
डिज़ाइन नोट्स
Use the manufacturer land pattern for the 100-UFBGA 7 x 7 mm package and preserve access to all required programming, reset, clock, and power balls. A multilayer PCB with short escape routes, dedicated ground reference planes, and carefully placed decoupling is important for a 100-ball footprint. Validate pad geometry, solder-mask openings, paste apertures, and stencil reduction with the selected assembly process before production.
Confirm the exact supply pins, voltage ranges, and decoupling requirements in the STM32L152 datasheet before assigning the 1.8 V to 3.3 V operating range to the board architecture. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, provide a low-impedance ground path, and account for startup current in the regulator and power-source design.
Do not treat a matching package, clock rate, and Flash size as sufficient proof of interchangeability. Before substituting STM32L151VCH6 or another suffix variant, compare peripheral availability, alternate-function mapping, interrupt configuration, memory organization, clock trees, low-power modes, startup behavior, and the device's operating-temperature and qualification conditions.
The compact 100-UFBGA package has limited exposed heat-dissipation area relative to larger leaded packages. Use the manufacturer thermal data to determine whether additional copper, thermal vias, or board-area spreading is required. Estimate worst-case junction temperature from actual operating voltage, CPU utilization, ambient temperature, and the actual PCB thermal resistance rather than relying only on the ambient operating-temperature grade.
Plan programming and debug access before routing the fine-pitch BGA. Keep sensitive analog or sensor paths away from noisy switching nodes and high-current return paths, and provide the pin-description table and alternate-function map to the PCB designer. After routing, perform high-density design-rule checks and compare every escape route against the manufacturer's ball map to prevent mirrored or shifted assignments.
अनुपालन जानकारी
The verified product summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm each declaration for the exact ordering suffix using the current manufacturer documentation.