Texas Instruments

THS1009IDA - 10-Bit, 8 MSPS Dual-Channel ADC | Texas Instruments

Référence : THS1009IDA ✓ Actif
Single supply Vdss 32-pin TSSOP (DA) Package
MOQ : 1 |

THS1009IDA Présentation

The Texas Instruments THS1009IDA is a 10-bit, 8 MSPS, dual-channel analog-to-digital converter with simultaneous sampling, parallel DSP or microprocessor output, channel autoscan, and low-power operation. The device accepts two single-ended inputs or one differential input, with combined single-ended and differential configurations, and is packaged in a 32-pin TSSOP (DA) package.

An analog-to-digital converter, or ADC, converts continuously varying analog voltage into a numeric value for processing, measurement, or transmission. The THS1009 belongs to the data-converter IC hierarchy and combines an 8 MSPS sampling rate with 10-bit resolution. Its parallel output is designed for connection directly to digital processors, DSPs, or other parallel-interface systems rather than serial data links.

The principal operating characteristics include 10-bit conversion resolution, an 8 MSPS sampling rate, two analog channels, and simultaneous sampling. The converter also supports channel autoscan, internal or external reference operation, and a single-supply architecture. These features make it suitable for radar, imaging, high-speed acquisition, communications, and industrial instrumentation systems.

The parallel interface provides ten-bit conversion results with associated control signaling, while the dual-channel architecture can capture two single-ended signals at the same time. A differential input configuration supports one differential signal, and the device can also combine both operating modes. External reference voltage can be applied through dedicated REFP and REFM pins when the application requires a precisely controlled full-scale range.

Typical applications include radar signal acquisition, medical or industrial imaging, high-speed data capture, communications receivers, and real-time control systems. The simultaneous-sampling architecture is particularly useful when two sensors must be observed at the same instant, because it reduces timing skew between related channels. The 8 MSPS throughput provides sufficient temporal resolution for many intermediate-speed signal chains.

PCB implementation requires careful routing of analog inputs, reference connections, digital outputs, and power supplies. Short analog traces, stable reference routing, suitable bypass capacitors, and separation between sensitive input nodes and fast digital output paths help preserve conversion performance. The 32-pin TSSOP footprint is relatively large for a 10-bit converter but simplifies assembly in designs that already use this package.

This product summary consolidates the THS1009's resolution, throughput, channel architecture, input modes, package details, and application guidance into an engineering-focused reference. It also identifies the documentation needed for pin assignments, timing, reference selection, PCB implementation, and qualification decisions.

Alternatives de remplacement direct pour THS1009IDA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

THS1009IDA Valeurs maximales et caractéristiques électriques

Résolution 10 bit
Fréquence d'échantillonnage 8 MSPS
Analog Input Channels 2 channels
Sampling Architecture Simultaneous sampling
Input Configuration 2 single-ended, 1 differential, or combination of both
Conversion Architecture 1-stage pipelined ADC
Output Interface Parallel DSP or microprocessor interface
Channel Control Channel autoscan
Process Technology CMOS
Power Supply Architecture Single supply
External Reference Inputs REFP and REFM
Boîtier 32-pin TSSOP (DA)
Package Width 6.10 mm
Terminal Form Gull wing
Plage de température de fonctionnement -40 °C to +85 °C
Temperature Grade Industrial
Statut RoHS unknown
REACH Status unknown

Guide de configuration des broches du THS1009IDA 6.10 mm

Configuration des broches du THS1009IDA (boîtier 6.10 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 6.10 mm pour le THS1009IDA

Aucune donnée de brochage détaillée disponible pour THS1009IDA.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

THS1009IDA convient pour 6 applications: Radar Signal Acquisition, Industrial Imaging Systems, High-Speed Data Acquisition, Communications Receivers, Medical Signal Monitoring, Industrial Control and Monitoring.

📡

Radar Signal Acquisition

The THS1009IDA is well matched to radar acquisition systems requiring two related channels to be sampled at the same time. Its 8 MSPS throughput provides up to eight million conversion results per second per channel, while simultaneous sampling reduces timing skew between paired radar signals. The 10-bit parallel output can be connected to a DSP or microprocessor for range processing, filtering, or detection. Designers should use the manufacturer datasheet to select the single-ended or differential input configuration, establish the reference range, and confirm that the analog bandwidth and sample rate satisfy the required signal bandwidth.

📺

Industrial Imaging Systems

The THS1009IDA can serve as the conversion stage in industrial imaging equipment that requires synchronized acquisition of two detector or sensor signals. Its dual-channel simultaneous sampling makes channel alignment more practical than sequential multiplexing, and the 8 MSPS rate supports moderate-speed line or frame acquisition. The 10-bit parallel bus is suitable for DSP-based image processing, provided the host interface timing matches the converter output. Signal conditioning, antialias filtering, reference stability, and PCB separation between analog inputs and digital outputs remain central to obtaining repeatable image data.

🖥️

High-Speed Data Acquisition

The THS1009IDA is appropriate for intermediate-speed acquisition cards that gather one differential signal or two single-ended signals and transfer results to a parallel processor. An 8 MSPS sampling rate and 10-bit resolution provide a practical balance between throughput, output width, and circuit complexity. Simultaneous dual-channel sampling helps retain timing relationships in vibration, control, or condition-monitoring measurements. The board should use short input paths, a low-noise reference arrangement, proper bypass capacitors, and controlled return paths, while the acquisition firmware must account for the converter's parallel output and sampling latency.

🌐

Communications Receivers

The THS1009IDA can support communications receivers that sample two baseband or intermediate-frequency channels at the same instant. Simultaneous sampling is useful for I/Q measurements, phase-sensitive detection, and feedback loops where channel skew would affect the result. Its 10-bit resolution and 8 MSPS throughput are appropriate for many low-to-medium bandwidth receiver architectures, while the parallel interface permits direct connection to DSP logic. The input network must provide suitable gain and bandwidth, and REFP and REFM should be driven from a stable reference appropriate to the required full-scale range.

💊

Medical Signal Monitoring

The THS1009IDA can be evaluated for medical or diagnostic monitoring modules that acquire two low-bandwidth analog channels at an identical sampling instant. Its simultaneous conversion supports paired physiological or diagnostic measurements without acquisition-time mismatch, and its 8 MSPS rate offers more timing margin than many low-speed monitoring systems require. The 10-bit parallel output allows efficient transfer into a processor, but medical use requires application-specific safety, signal-isolation, validation, and regulatory review. Input protection, patient-safety isolation, reference accuracy, and noise performance must be addressed outside the converter itself.

🏭

Industrial Control and Monitoring

The THS1009IDA fits industrial control and monitoring systems that require faster sampling than a general-purpose slow ADC while retaining a simple parallel interface. Two channels can represent a sensed control variable and its feedback, a vibration input and trigger, or two outputs from a transducer bridge. Sampling both channels simultaneously improves the validity of comparisons, while the 8 MSPS rate provides temporal resolution for transient analysis. A robust implementation should include input protection, calibrated scaling, stable references, diagnostics, and adequate grounding, especially when the converter operates near switching regulators or motors.

What is the resolution and sampling rate of the THS1009IDA?
The THS1009IDA provides 10-bit resolution and an 8 MSPS conversion rate for each channel. According to the Texas Instruments product page, the converter is a low-power CMOS device designed for parallel DSP and microprocessor interfaces. This combination supports intermediate-speed signal acquisition while keeping the digital output wide enough for direct parallel processing.
How many analog input channels does the THS1009IDA have?
The THS1009IDA has two analog input channels with simultaneous-sampling capability. Texas Instruments describes support for two single-ended signals, one differential signal, or a combination of both. Simultaneous operation is valuable when two related waveforms must be captured at the same time without acquisition timing offset.
Can the THS1009IDA operate from a single supply voltage?
The THS1009IDA uses a single-supply architecture. The Texas Instruments product page identifies the THS1009 as a low-power, 8 MSPS CMOS converter, while the detailed input-voltage limits and supply-current limits must be confirmed in the manufacturer datasheet before a power rail is selected.
What interface does the THS1009IDA use for conversion data?
The THS1009IDA uses a parallel interface intended for DSPs and microprocessors. Each 10-bit conversion result is presented through dedicated digital data outputs rather than a serial interface. Board-level implementation should account for simultaneous data-output switching and maintain adequate spacing between analog inputs and digital signal traces.
Where can I download the THS1009IDA datasheet PDF?
The official THS1009 datasheet is available from the Texas Instruments literature URL, which redirects to the manufacturer PDF. The distributor-listed document describes a 10-bit, 8 MSPS converter with simultaneous sampling and 32-pin TSSOP packaging. Use the manufacturer copy for final pin names, timing, electrical limits, and application details.
Where can I find the THS1009IDA pinout and pin descriptions?
The THS1009IDA pinout is documented in the pin-configuration and pin-description sections of the Texas Instruments manufacturer datasheet. The component uses a 32-pin TSSOP (DA) package and includes REFP and REFM reference inputs. Assign PCB tracks from that table rather than inferring connections from signal type or package position.
What is the THS1009IDA used for in radar and imaging systems?
The THS1009IDA is suitable for radar, imaging, and other high-speed acquisition systems that require an 8 MSPS sampling rate. Its two-channel simultaneous sampling helps preserve timing relationships between signals, while the 10-bit parallel output can feed a DSP or microprocessor directly. Input bandwidth and antialiasing requirements should be checked against the acquisition bandwidth.
When should I choose the THS1009IDA for a dual-channel acquisition design?
Choose the THS1009IDA when a design needs two simultaneously sampled channels, 10-bit resolution, and an 8 MSPS parallel-output converter in a 32-pin TSSOP package. It is particularly suitable for coherent measurement of related waveforms. Prefer another converter if the design requires a serial interface, substantially higher resolution, or a different package and pin arrangement.
What is the difference between single-ended and differential operation in the THS1009IDA?
The THS1009IDA can operate with two single-ended inputs, one differential input, or a combination of both. Single-ended operation measures each signal relative to ground, while differential operation measures the voltage difference between two inputs and can reduce common-mode interference. The manufacturer datasheet defines the exact input multiplexing and permissible combinations.
Can an external reference improve THS1009IDA conversion accuracy?
The THS1009IDA provides dedicated REFP and REFM inputs, allowing an external reference to establish the upper and lower limits of the analog input range. According to the Texas Instruments datasheet, the external source must be programmed for operation. Reference stability, noise, and settling therefore directly affect the achievable measurement accuracy.
What is the best drop-in replacement for the THS1009IDA?
A valid drop-in replacement must use the same 32-pin TSSOP (DA) footprint, preserve the 10-bit resolution and 8 MSPS throughput, and provide compatible reference, control, and parallel-output functions. No candidate in the available cross-reference results demonstrates all of those requirements, so no replacement should be approved solely from a similarity listing. Request a pin- and timing-qualified recommendation for the specific design.
Where can I buy the THS1009IDA and check current lead time?
Use the Request a Quote form on this page to request the THS1009IDA, current availability, lead time, and order quantity from XAIPART. The manufacturer lists the device as active and identifies its industrial temperature grade as -40 °C to +85 °C. Purchase planning should also account for the 32-pin TSSOP packaging configuration.
What is the current price of the THS1009IDA?
Current pricing for the THS1009IDA is calculated when a quotation is prepared rather than stated as a static value on this page. Use the Request a Quote form on this page and specify the required quantity, tube or reel packaging preference, shipment destination, and target date. This allows the offer to reflect current component availability and procurement conditions.
Is the THS1009IDA in stock and what is its lead time?
Current stock and lead time for the THS1009IDA should be confirmed through the Request a Quote form on this page. Texas Instruments identifies the THS1009 family as active, and distributor records list THS1009IDA as a 32-pin TSSOP device. Supply timing can vary with quantity, package form, and purchasing conditions.
THS1009IDA vs THS1009 family alternatives: which fits an 8 MSPS parallel system?
The THS1009IDA fits an 8 MSPS, 10-bit parallel acquisition system when two simultaneous channels and the 32-pin TSSOP (DA) footprint meet the design requirements. No verified cross-reference candidate was found with sufficient evidence of identical pinout and timing. A family member should therefore be selected only after its package, pin functions, reference behavior, output timing, and electrical limits are checked against the manufacturer documentation.
What are the key specifications of THS1009IDA that engineers should know?
The THS1009IDA is a 10-bit, 8 MSPS, dual-channel CMOS ADC with simultaneous sampling and a parallel DSP or microprocessor interface. It supports two single-ended inputs, one differential input, or both, includes channel autoscan, and accepts internal or external reference sources through REFP and REFM. The industrial-temperature device is packaged in a 32-pin TSSOP (DA) package.
Is the THS1009IDA suitable for communications and high-speed data acquisition?
The THS1009IDA is suitable for communications, radar, imaging, and high-speed acquisition applications when an 8 MSPS sampling rate and 10-bit resolution are sufficient. Its simultaneous dual-channel sampling supports paired-signal acquisition, while the parallel output reduces the need for serial-interface overhead. Verify input bandwidth, signal-to-noise performance, and reference requirements for the operating conditions.

Données de référence d'ingénierie pour THS1009IDA — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

The THS1009IDA is a strong choice when an acquisition system needs two simultaneously sampled channels, 10-bit resolution, an 8 MSPS conversion rate, and a parallel processor interface. Its 32-pin TSSOP (DA) package and external-reference capability are useful for controlled industrial, communications, radar, imaging, and measurement designs. Choose a different ADC when the system requires a serial interface, substantially higher resolution or sampling rate, lower power, a smaller footprint, or a different temperature range. Do not approve a replacement based only on similar resolution and speed; the candidate must also match the 32-pin TSSOP footprint, reference configuration, input multiplexing, control timing, and output timing. For designs using the parallel bus, verify board-level timing and output settling rather than relying solely on nominal sampling-rate equivalence.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Texas Instruments
Package 32-pin TSSOP (DA)
Resolution 10 bit
Sampling Rate 8 MSPS
Analog Input Channels 2 channels
Sampling Architecture Simultaneous sampling
Input Configuration 2 single-ended, 1 differential, or combination
Output Interface Parallel DSP or microprocessor
Operating Temperature Range -40 °C to +85 °C
Special Features Channel autoscan and external reference inputs

Principaux différenciateurs

  • Simultaneous dual-channel acquisition (vs No qualified drop-in alternative identified)
  • Parallel processor connectivity (vs No qualified drop-in alternative identified)
  • Flexible analog input architecture (vs No qualified drop-in alternative identified)
  • Autoscan and external reference support (vs No qualified drop-in alternative identified)

Notes de conception

Route the two analog inputs using short, matched paths and keep the REFP and REFM connections away from digital output and supply-switching nodes. Place input and reference decoupling close to their associated pins, and maintain a continuous ground reference beneath the analog section. Parallel data outputs can switch simultaneously, so generous return-path continuity and controlled grounding are important for reducing coupling into the input stage.

Account for the converter's sampling instant, output latency, and digital bus timing when connecting it to a DSP or microprocessor. The 10-bit parallel outputs should be length-matched where output skew affects the host sampling boundary, and unused outputs should be handled according to the device's truth tables and application guidance. External clocking and data-capture timing must be reviewed against the manufacturer timing diagrams before release.

Do not treat the 8 MSPS sampling rate as permission to apply arbitrary bandwidth to the analog inputs. Verify input bandwidth, source impedance, settling behavior, and allowable full-scale range in the manufacturer datasheet. Also confirm the programmed reference mode, reference polarity, analog input configuration, and output enable timing; incorrect reference or control settings can produce valid-looking digital data with an incorrect scale.

Place the required supply bypass capacitors directly at the power and ground pins and isolate converter supply branches from noisy actuator or switching loads. If the ADC shares a board with motors, relays, or DC-DC converters, route its supply from a quieter node and verify allowable ripple and supply tolerance. Because exact supply-current and power-consumption limits are not stated here, use the manufacturer electrical-characteristics table for the final budget.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available product information identifies an industrial-grade THS1009IDA but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Recherches associées

THS1009IDA datasheet THS1009IDA pinout THS1009IDA datasheet pdf THS1009IDA specifications THS1009IDA equivalent THS1009IDA replacement THS1009IDA cross reference THS1009IDA footprint THS1009IDA application circuit Texas Instruments THS1009IDA THS1009IDA price THS1009IDA stock THS1009 10-bit 8 MSPS ADC THS1009IDA 32-TSSOP pinout

Composants & termes associés

Texas Instruments THS1009IDA THS1009 analog-to-digital converter ADC data converter IC 10-bit resolution 8 MSPS dual-channel ADC simultaneous sampling single-ended input differential input parallel interface DSP interface microprocessor interface channel autoscan external reference REFP REFM CMOS single-supply operation 32-pin TSSOP TSSOP DA package radar acquisition industrial imaging
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ