TXB0104QRUTRQ1 - 4-Bit Auto-Direction Level Translator | TI
Référence : TXB0104QRUTRQ1 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.2 | $1,20 |
| 10 | $1.08 | $10,80 |
| 100 | $0.85 | $85,00 |
| 500 | $0.68 | $340,00 |
| 1 000 | $0.55 | $550,00 |
TXB0104QRUTRQ1 Présentation
A voltage-level translator is a logic device that interfaces digital circuits operating at different supply voltages on the same PCB, such as a 1.8 V microcontroller talking to a 3.3 V or 5 V peripheral. translators sit within the broader logic IC hierarchy as members of the voltage-translation and signal-conditioning family used in mixed-voltage embedded systems.
Key features include AEC-Q100 Grade 1 qualification (-40C to +125C ambient), +/-15kV IEC ESD protection on the I/O pins, and automatic direction sensing that eliminates direction-control pins or firmware overhead. The TXB family push-pull architecture uses internal one-shot edge accelerators, giving rise and fall symmetry suited to push-pull CMOS outputs. The 12-UQFN package enables very dense layouts in space-constrained automotive modules.
Typical applications include automotive body electronics and lighting, infotainment and cluster SPI/I2C-adjacent push-pull signaling, sensor interface level shifting, and general-purpose MCU-to-peripheral level translation between 1.8 V, 2.5 V, 3.3 V, and 5 V domains. The wide 1.2 V low-side support makes it suitable for next-generation low-voltage processors.
Design note: this device is intended for push-pull CMOS signals; for open-drain buses such as I2C, choose the TXS family instead. Do not add external pull-up or pull-down resistors on TXB I/O lines, as they can defeat the automatic direction sensing.
Alternatives de remplacement direct pour TXB0104QRUTRQ1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TXB0104QRUTRQ1 (même facteur de forme et même empreinte) — différant par Operating Temperature, Package, Automotive Qualification, Data Rate, ESD Protection.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TXB0104RUTR
✅ Remplacement direct✓ En stock
$0.65 / unité
Voir la fiche technique →TXB0104ZXUR
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
TXS0104RUTR
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
TXB0104QRUTRQ1 Valeurs maximales et caractéristiques électriques
| Translator Type | 4-bit bidirectional voltage-level translator |
| Direction Control | Automatic direction sensing |
| VCCA Range (A Port) | 1.2 V to 3.6 V |
| VCCB Range (B Port) | 1.65 V to 5.5 V |
| Supply Constraint | VCCA <= VCCB |
| Débit de données | Up to 100 Mbps |
| ESD Protection | +/-15 kV (IEC air-gap) |
| Automotive Qualification | AEC-Q100 Grade 1 |
| Température de fonctionnement | -40C to +125C |
| Boîtier | 12-UQFN (RUT), 1.7 mm x 2.0 mm |
| Canaux | 4 |
| Signal Type | Push-pull (CMOS) |
| Type de montage | Surface Mount |
| Applications | Automotive |
Configuration des broches de TXB0104QRUTRQ1
| Broche 1 | A1 — A-port data input/output 1 (1.2-3.6 V) |
| Broche 2 | VCCA — A-port supply, 1.2 V to 3.6 V |
| Broche 3 | A2 — A-port data input/output 2 |
| Broche 4 | A3 — A-port data input/output 3 |
| Broche 5 | GND — Ground reference |
| Broche 6 | A4 — A-port data input/output 4 |
| Broche 7 | B4 — B-port data input/output 4 (1.65-5.5 V) |
| Broche 8 | NC — No connect |
| Broche 9 | B3 — B-port data input/output 3 |
| Broche 10 | B2 — B-port data input/output 2 |
| Broche 11 | VCCB — B-port supply, 1.65 V to 5.5 V |
| Broche 12 | B1 — B-port data input/output 1 |
Applications typiques
TXB0104QRUTRQ1 convient pour 6 applications: Automotive Body Electronics, Automotive Infotainment and Clusters, Sensor Interface Level Shifting, Mixed-Voltage MCU-to-Peripheral Translation, Industrial Control and PLC I/O, Automotive Lighting Modules.
Automotive Body Electronics
Body control modules mix 1.8 V MCU GPIO with 3.3 V and 5 V actuators, switches, and diagnostic lines. The TXB0104QRUTRQ1 fits because its AEC-Q100 Grade 1 rating (-40C to +125C) and +/-15kV IEC ESD protection withstand the harsh automotive electrical environment and harness transients. Its automatic direction sensing removes direction-control firmware from body function code. Four channels in a 1.7 mm x 2.0 mm UQFN consolidate multiple discrete transistor level-shift circuits, cutting BOM count while sustaining push-pull signal integrity up to 100 Mbps.
Recommandé
Automotive Infotainment and Clusters
Cluster and infotainment modules translate between low-voltage SoC GPIO (1.8 V) and 3.3 V or 5 V display, backlight, and peripheral logic. The TXB0104QRUTRQ1 supplies four bidirectional push-pull channels at up to 100 Mbps, fast enough for high-speed control and status signaling, with automatic direction sensing that simplifies A-port/B-port hookup. AEC-Q100 Grade 1 qualification covers the -40C to +125C cabin-ambient extremes, and the compact 12-UQFN fits dense PCBAs behind displays where layout area is at a premium.
Recommandé
Sensor Interface Level Shifting
Modern automotive and industrial sensors output push-pull digital signals at 1.8 V or 2.5 V while controllers and ADC front ends run at 3.3 V or 5 V. The TXB0104QRUTRQ1 bridges these domains with 1.2 V low-side support, the widest in its class among simple translators, and +/-15kV ESD robustness for wiring that leaves the module enclosure. Automatic direction sensing handles shared trigger/interrupt lines without a DIR pin. Four channels translate position, level, or status sensor outputs in one 1.7 mm x 2.0 mm UQFN package.
Recommandé
Mixed-Voltage MCU-to-Peripheral Translation
Embedded designs frequently pair a 1.8 V microcontroller with 3.3 V or 5 V peripherals such as EEPROM, displays, and motor drivers. The TXB0104QRUTRQ1 translates four push-pull GPIO, SPI-adjacent, or control signals bidirectionally at up to 100 Mbps with no direction pin, no enable pin, and no external pull resistors. The VCCA <= VCCB architecture directly supports 1.2 V to 3.6 V A-side logic against a 1.65 V to 5.5 V B-side rail. The 12-UQFN (RUT) footprint occupies minimal board area versus discrete BSS138-style circuits.
Recommandé
Industrial Control and PLC I/O
Industrial controllers translate 1.8 V DSP or FPGA bank I/O to 5 V field-side logic for motor drivers, relays, and diagnostics. The TXB0104QRUTRQ1 provides four push-pull bidirectional channels with 100 Mbps bandwidth, enough for fast PWM status and encoder-adjacent signaling, while its +125C rating suits control cabinets with limited airflow. Automatic direction sensing handles half-duplex lines without control GPIO overhead. Although automotive-qualified, its robust ESD and temperature specs give industrial designs extra margin at automotive-grade pricing.
Recommandé
Automotive Lighting Modules
Adaptive LED and matrix lighting modules mix low-voltage MCU logic with 3.3 V or 5 V driver ICs, fault-diagnosis lines, and fan or stepper control signals. The TXB0104QRUTRQ1 translates these push-pull lines bidirectionally at up to 100 Mbps with automatic direction sensing, and its +/-15kV IEC ESD rating helps survive connector-transient exposure near the lamp assembly. AEC-Q100 Grade 1 -40C to +125C coverage addresses underhood-adjacent temperature swings, while the 1.7 mm x 2.0 mm UQFN suits compact driver boards inside lamp housings.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TXB0104QRUTRQ1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TXB0104RUTR | TXB0104ZXUR | TXS0104RUTR |
|---|---|---|---|---|
| Package | 12-UQFN (RUT) 1.7x2.0 mm | 12-UQFN (RUT) - same | 12-UQFN (ZXU) 1.26x1.16 mm - smaller land pattern | 12-UQFN (RUT) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Data Rate | 100 Mbps | 100 Mbps | 100 Mbps | Lower (open-drain architecture) |
| Signal Type | Push-pull (CMOS) | Push-pull (CMOS) | Push-pull (CMOS) | Push-pull and open-drain (I2C-capable) |
| Primary Use Case | Automotive push-pull level shifting | Cost-optimized industrial/consumer | Ultra-compact layouts (board redesign) | Open-drain buses such as I2C |
Principaux différenciateurs
- Automotive AEC-Q100 Grade 1 qualification with +/-15kV ESD (vs TXB0104RUTR)
- 1.2 V low-side A-port support (vs LSF0102-Q1)
- 4-bit integration vs 2-bit alternatives (vs TXS0102-Q1)
Notes de conception
Never place external pull-up or pull-down resistors on TXB0104 I/O pins. The automatic direction sensing uses weak internal pull-downs on the A port and pull-ups on the B port; external resistors can falsely trigger direction reversal or cause oscillation. For open-drain buses such as I2C that require pull-ups, select the TXS0104 instead.
Observe the VCCA <= VCCB constraint at all times, including during power sequencing. TI application guidance recommends powering VCCA before or simultaneously with VCCB; a floating or absent VCCA with VCCB applied can back-drive the A port. Use 0.1 uF ceramic decoupling capacitors on both VCCA and VCCB pins, placed within 2 mm of the pins given the 1.7x2.0 mm UQFN footprint.
The 12-UQFN (RUT) 1.7 mm x 2.0 mm land pattern is defined in TI datasheet Rev. D. Follow the datasheet recommended PCB layout with via-in-pad or short thermal reliefs on the center pads for manufacturability, and follow IPC/JEDEC moisture sensitivity handling for the reel packaging. Keep high-rate (100 Mbps) traces impedance-controlled and short, matching A-side and B-side trace lengths where signal integrity matters.
Informations de conformité
AEC-Q100 Grade 1 qualified per TI datasheet Rev. D. RoHS/REACH status not stated in provided data - [DATA_NEEDED].
