WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic
Référence : WM8974CGEFL/V ✗ Fin de vieWM8974CGEFL/V Présentation
An audio codec is a semiconductor interface that converts digital audio samples into analog signals, converts analog microphone signals into digital data, and often includes programmable gain, filtering, and output-driver functions. Within the wider hierarchy, the WM8974CGEFL/V belongs to the audio codec category, which is part of interface ICs and ultimately serves as a mixed-signal subsystem within a power-management and signal-processing architecture. Its integrated speaker driver can reduce the number of separate output components required in small audio systems.
The WM8974CGEFL/V provides a 24-bit audio interface, digital gain control, an integrated phase-locked loop, and a mono speaker-driver stage. Its -40 °C to +85 °C operating-temperature range supports industrial and commercial equipment. The 24-QFN exposed-pad package also promotes heat transfer through the PCB copper area, although actual thermal performance depends on the layout, copper area, surrounding temperature, and audio-output load.
Digital gain is particularly useful in systems where the software or system controller must adjust playback level without changing passive components. The built-in phase-locked loop supports systems in which the audio clock must be derived from or synchronized with another digital block. The mono codec architecture is suited to products such as alarm systems, industrial annunciators, compact voice terminals, and embedded audio modules that need one amplified audio path rather than a full stereo codec.
Typical applications include industrial audible alarms, building-control panels, communication terminals, portable voice accessories, and embedded control systems with a local speaker. In these designs, the codec can accept digital audio from a host processor, provide programmable gain, and drive a loudspeaker through the integrated output stage. The exposed pad remains a functional part of the package and should be connected according to the manufacturer's recommended footprint and thermal layout.
PCB design should preserve the recommended decoupling topology and keep analog and digital return currents controlled. Place input, output, and bypass capacitors close to their associated pins, connect the exposed pad to the intended ground or pad-design net, and maintain the manufacturer-specified footprint dimensions. Audio performance also depends on correct clocking, speaker loading, analog grounding, and separation from switching noise.
This product record combines the exact package, temperature, interface, and feature information with practical design guidance, sourcing instructions, and an explicit drop-in compatibility assessment. The comparison focuses on true pin-to-pin replacements rather than broadly similar codecs that require a different footprint, pin assignment, clock arrangement, or power architecture.
Alternatives de remplacement direct pour WM8974CGEFL/V — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesWM8974CGEFL/V Valeurs maximales et caractéristiques électriques
| Audio Interface Resolution | 24 bit |
| Channel Configuration | Mono |
| Integrated Output | Mono speaker driver |
| Phase-Locked Loop | Built-in |
| Digital Gain | On-chip digital gain control |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Boîtier | 24-QFN with exposed pad |
| Package Body Size | 4 mm x 4 mm |
| Type de montage | Surface mount |
| Component Type | Audio interface codec |
| Statut RoHS | unknown |
| REACH Status | unknown |
Guide de configuration des broches du WM8974CGEFL/V 4 mm x 4 mm
Configuration des broches du WM8974CGEFL/V (boîtier 4 mm x 4 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour WM8974CGEFL/V.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
WM8974CGEFL/V convient pour 6 applications: Industrial Audible Alarm, Building Control Voice Panel, Communication Terminal, Portable Voice Accessory, Embedded Audio Control Module, Smart Sensor Audio Interface.
Industrial Audible Alarm
The WM8974CGEFL/V fits compact industrial alarm modules that reproduce spoken prompts or warning tones through a single loudspeaker. Its 24-bit mono audio interface supports digital source material, while on-chip digital gain allows the controller to adjust level according to site conditions. The integrated speaker driver reduces the need for a separate output amplifier and associated passives. The 24-QFN exposed-pad package requires a thermal-conscious PCB layout, and the -40 °C to +85 °C range suits many factory environments. Confirm the allowable speaker impedance, output power, distortion target, and bypass requirements in the manufacturer application circuit before finalizing the hardware.
Recommandé
Building Control Voice Panel
The WM8974CGEFL/V is suitable for wall-mounted building-control panels that provide local status feedback, door notifications, or recorded voice prompts through one mono speaker. Its on-chip digital gain supports software-controlled volume adjustment across different panel states, while the integrated phase-locked loop helps synchronize digital audio timing with the panel processor. Integrating the codec and speaker driver into a 4 mm by 4 mm QFN footprint helps reduce board area. Designers should follow the recommended grounding and output-filter layout, verify acoustic performance across the full supply range, and keep switching regulators and digital clocks physically separated from the analog output path.
Recommandé
Communication Terminal
The WM8974CGEFL/V can provide a compact mono voice-output path in communication terminals, call-bay equipment, and industrial intercom endpoints. The 24-bit interface suits digital voice pipelines, and programmable digital gain allows the system to compensate for different speaker sizes or acoustic environments without changing passive values. Its integrated speaker driver removes a separate amplifier stage, helping reduce board area and component count. The codec clock must be configured correctly for the host system, and the board should use controlled return paths to prevent digital activity from coupling into the speaker output. Confirm line or microphone routing requirements against the datasheet before assigning the complete signal path.
Recommandé
Portable Voice Accessory
The WM8974CGEFL/V is useful in compact portable accessories that provide confirmation tones, recorded prompts, or status audio through one small speaker. The mono 24-bit codec architecture avoids unnecessary stereo circuitry, while the integrated speaker driver and digital gain reduce both footprint and configuration effort. The 4 mm by 4 mm QFN package supports dense portable assemblies, although the exposed pad and its thermal vias must be designed according to the manufacturer footprint. Battery-powered implementations should verify codec supply options, quiescent behavior, startup sequencing, and output idle characteristics in the datasheet before selecting operating modes and power-management sequencing.
Recommandé
Embedded Audio Control Module
The WM8974CGEFL/V suits embedded modules that must convert digital audio into a local mono playback signal while conserving board area. Its built-in phase-locked loop can assist clock organization in systems where multiple digital blocks share timing resources, and digital gain simplifies runtime level control. The device is particularly attractive for motor-control, instrumentation, and appliance-control products that use audible feedback or alarm tones. Keep the audio supply, exposed pad, and analog return network arranged according to the reference design, and validate speaker startup, idle noise, and distortion with the intended enclosure because acoustic loading can alter perceived output quality.
Recommandé
Smart Sensor Audio Interface
The WM8974CGEFL/V can add local audible feedback to smart industrial sensors, monitoring nodes, and edge devices that already process digital data. A mono speaker path is sufficient for status tones, spoken event summaries, and diagnostic prompts, while the codec’s 24-bit interface provides a clear digital audio boundary. The integrated digital gain allows firmware to vary output level for different alert priorities, and the speaker driver reduces external amplification complexity. The smart-node design should isolate clock and switching noise, observe the recommended capacitor placement, and test audible output over the full intended temperature range of -40 °C to +85 °C.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour WM8974CGEFL/V — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
The WM8974CGEFL/RV is the closest documented same-family alternative because it uses the same die, core electrical specifications, package, and pinout. Select it when its ordering code, labeling, and physical delivery format satisfy the assembly and procurement requirements. Do not choose a broadly similar stereo codec merely because it also includes a DAC, headphone driver, or digital audio interface; differences in terminal assignment, clocking, supplies, signal routing, and package make those devices functional alternatives rather than drop-in replacements. For an existing board, validate the complete pin list and exposed-pad layout before approving any alternate suffix.
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | 24-QFN with exposed pad |
| Brand | Cirrus Logic |
| Audio Resolution | 24 bit |
| Channel Configuration | Mono |
| Integrated Speaker Driver | Yes |
| Digital Gain | On-chip digital gain |
| Phase-Locked Loop | Built-in |
| Operating Temperature Range | -40 °C to +85 °C |
| Body Size | 4 mm x 4 mm |
| Mounting Type | Surface mount |
Notes de conception
Use the manufacturer footprint for the 24-QFN exposed-pad land pattern and thermal-via arrangement. Treat the exposed pad as part of both the mechanical and electrical design: confirm its assigned net from the pin-description table before routing. Place the recommended input, output, and bypass capacitors adjacent to their associated pins, and preserve the documented pin numbering orientation so the package can be assembled without rotation or mirroring.
Do not infer electrical compatibility from the 24-QFN package alone. The built-in phase-locked loop, digital gain, speaker output, clocking, and supply arrangement determine whether a device is truly pin-to-pin compatible. A suitable replacement must match every numbered terminal, the exposed-pad connection, power rails, supported audio interface, and speaker-load requirements. Generic mono codecs identified only as functional equivalents are not acceptable drop-in substitutions.
Keep the codec supply bypass network and analog return path compact, and separate sensitive audio routing from switching-regulator and high-speed digital traces where practical. Follow the manufacturer reference layout for the speaker output network and verify it against the selected speaker impedance. If audible noise, ringing, or distortion appears, inspect clock stability, grounding, decoupling, and output loading before changing gain settings or adding external filtering.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for this exact MPN appears in the cited product information. The WM8974CGEFL/RV cross-reference is described as a lead-free package variant, but that statement was not applied to the target suffix without an explicit target-specific declaration.