Cirrus Logic Inc.

WM8974CGEFL/V - 24-Bit Mono Audio Codec | Cirrus Logic

MPN: WM8974CGEFL/V ✗ סוף ייצור
24-QFN with exposed pad Package
כמות הזמנה מינימלית: 1 |

WM8974CGEFL/V סקירה

The Cirrus Logic WM8974CGEFL/V is a 24-bit mono audio codec with an integrated speaker driver, built-in phase-locked loop, and on-chip digital gain, packaged in a 24-pin QFN configuration with an exposed pad. The device is identified as a 4 mm by 4 mm surface-mount audio interface and is intended for compact systems requiring digital audio playback, microphone capture, and direct speaker-drive capability.

An audio codec is a semiconductor interface that converts digital audio samples into analog signals, converts analog microphone signals into digital data, and often includes programmable gain, filtering, and output-driver functions. Within the wider hierarchy, the WM8974CGEFL/V belongs to the audio codec category, which is part of interface ICs and ultimately serves as a mixed-signal subsystem within a power-management and signal-processing architecture. Its integrated speaker driver can reduce the number of separate output components required in small audio systems.

The WM8974CGEFL/V provides a 24-bit audio interface, digital gain control, an integrated phase-locked loop, and a mono speaker-driver stage. Its -40 °C to +85 °C operating-temperature range supports industrial and commercial equipment. The 24-QFN exposed-pad package also promotes heat transfer through the PCB copper area, although actual thermal performance depends on the layout, copper area, surrounding temperature, and audio-output load.

Digital gain is particularly useful in systems where the software or system controller must adjust playback level without changing passive components. The built-in phase-locked loop supports systems in which the audio clock must be derived from or synchronized with another digital block. The mono codec architecture is suited to products such as alarm systems, industrial annunciators, compact voice terminals, and embedded audio modules that need one amplified audio path rather than a full stereo codec.

Typical applications include industrial audible alarms, building-control panels, communication terminals, portable voice accessories, and embedded control systems with a local speaker. In these designs, the codec can accept digital audio from a host processor, provide programmable gain, and drive a loudspeaker through the integrated output stage. The exposed pad remains a functional part of the package and should be connected according to the manufacturer's recommended footprint and thermal layout.

PCB design should preserve the recommended decoupling topology and keep analog and digital return currents controlled. Place input, output, and bypass capacitors close to their associated pins, connect the exposed pad to the intended ground or pad-design net, and maintain the manufacturer-specified footprint dimensions. Audio performance also depends on correct clocking, speaker loading, analog grounding, and separation from switching noise.

This product record combines the exact package, temperature, interface, and feature information with practical design guidance, sourcing instructions, and an explicit drop-in compatibility assessment. The comparison focuses on true pin-to-pin replacements rather than broadly similar codecs that require a different footprint, pin assignment, clock arrangement, or power architecture.

חלופות תחליף ישיר עבור WM8974CGEFL/V — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

WM8974CGEFL/V דירוגים מרביים ומאפיינים חשמליים

Audio Interface Resolution 24 bit
Channel Configuration Mono
Integrated Output Mono speaker driver
Phase-Locked Loop Built-in
Digital Gain On-chip digital gain control
טווח טמפרטורת פעולה -40 °C to +85 °C
מארז 24-QFN with exposed pad
Package Body Size 4 mm x 4 mm
סוג הרכבה Surface mount
Component Type Audio interface codec
סטטוס RoHS unknown
REACH Status unknown

מדריך תצורת פינים של WM8974CGEFL/V 4 mm x 4 mm

תצורת פינים עבור WM8974CGEFL/V (מארזת 4 mm x 4 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 4 mm x 4 mm עבור WM8974CGEFL/V

אין נתוני פריסת פינים מפורטים עבור WM8974CGEFL/V.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

WM8974CGEFL/V מתאים עבור 6 יישוםs: Industrial Audible Alarm, Building Control Voice Panel, Communication Terminal, Portable Voice Accessory, Embedded Audio Control Module, Smart Sensor Audio Interface.

🏭

Industrial Audible Alarm

The WM8974CGEFL/V fits compact industrial alarm modules that reproduce spoken prompts or warning tones through a single loudspeaker. Its 24-bit mono audio interface supports digital source material, while on-chip digital gain allows the controller to adjust level according to site conditions. The integrated speaker driver reduces the need for a separate output amplifier and associated passives. The 24-QFN exposed-pad package requires a thermal-conscious PCB layout, and the -40 °C to +85 °C range suits many factory environments. Confirm the allowable speaker impedance, output power, distortion target, and bypass requirements in the manufacturer application circuit before finalizing the hardware.

🧩

Building Control Voice Panel

The WM8974CGEFL/V is suitable for wall-mounted building-control panels that provide local status feedback, door notifications, or recorded voice prompts through one mono speaker. Its on-chip digital gain supports software-controlled volume adjustment across different panel states, while the integrated phase-locked loop helps synchronize digital audio timing with the panel processor. Integrating the codec and speaker driver into a 4 mm by 4 mm QFN footprint helps reduce board area. Designers should follow the recommended grounding and output-filter layout, verify acoustic performance across the full supply range, and keep switching regulators and digital clocks physically separated from the analog output path.

🌐

Communication Terminal

The WM8974CGEFL/V can provide a compact mono voice-output path in communication terminals, call-bay equipment, and industrial intercom endpoints. The 24-bit interface suits digital voice pipelines, and programmable digital gain allows the system to compensate for different speaker sizes or acoustic environments without changing passive values. Its integrated speaker driver removes a separate amplifier stage, helping reduce board area and component count. The codec clock must be configured correctly for the host system, and the board should use controlled return paths to prevent digital activity from coupling into the speaker output. Confirm line or microphone routing requirements against the datasheet before assigning the complete signal path.

📱

Portable Voice Accessory

The WM8974CGEFL/V is useful in compact portable accessories that provide confirmation tones, recorded prompts, or status audio through one small speaker. The mono 24-bit codec architecture avoids unnecessary stereo circuitry, while the integrated speaker driver and digital gain reduce both footprint and configuration effort. The 4 mm by 4 mm QFN package supports dense portable assemblies, although the exposed pad and its thermal vias must be designed according to the manufacturer footprint. Battery-powered implementations should verify codec supply options, quiescent behavior, startup sequencing, and output idle characteristics in the datasheet before selecting operating modes and power-management sequencing.

🔧

Embedded Audio Control Module

The WM8974CGEFL/V suits embedded modules that must convert digital audio into a local mono playback signal while conserving board area. Its built-in phase-locked loop can assist clock organization in systems where multiple digital blocks share timing resources, and digital gain simplifies runtime level control. The device is particularly attractive for motor-control, instrumentation, and appliance-control products that use audible feedback or alarm tones. Keep the audio supply, exposed pad, and analog return network arranged according to the reference design, and validate speaker startup, idle noise, and distortion with the intended enclosure because acoustic loading can alter perceived output quality.

🧩

Smart Sensor Audio Interface

The WM8974CGEFL/V can add local audible feedback to smart industrial sensors, monitoring nodes, and edge devices that already process digital data. A mono speaker path is sufficient for status tones, spoken event summaries, and diagnostic prompts, while the codec’s 24-bit interface provides a clear digital audio boundary. The integrated digital gain allows firmware to vary output level for different alert priorities, and the speaker driver reduces external amplification complexity. The smart-node design should isolate clock and switching noise, observe the recommended capacitor placement, and test audible output over the full intended temperature range of -40 °C to +85 °C.

What is the WM8974CGEFL/V?
The WM8974CGEFL/V is a 24-bit mono audio codec from Cirrus Logic with an integrated speaker driver, on-chip digital gain, and a built-in phase-locked loop. According to the manufacturer product information, it is packaged in a 24-QFN configuration with an exposed pad and a 4 mm by 4 mm body. The device is intended for compact embedded systems that combine digital audio playback, analog audio conversion, programmable gain, and direct speaker drive.
Where can I download the WM8974CGEFL/V datasheet PDF?
The WM8974CGEFL/V datasheet can be opened through the linked datasheet listing, which identifies the product as a Cirrus Logic 24-bit audio interface in a 24-QFN package. Use the manufacturer datasheet for the authoritative pin-description table, recommended application circuit, electrical characteristics, clock requirements, and exposed-pad layout. A published product-image and footprint page also provides a convenient view of the package drawing and board land pattern.
Where can I find the WM8974CGEFL/V pinout?
The WM8974CGEFL/V pinout is associated with the 24-QFN footprint and its exposed thermal pad. The linked product-image page includes pin and footprint diagrams for this exact MPN, while the manufacturer datasheet should be used when assigning signal names to every numbered terminal. Assign the exposed pad and decoupling connections only from those package drawings rather than inferring them from a generic 24-QFN symbol.
What audio functions does the WM8974CGEFL/V provide?
The WM8974CGEFL/V provides a 24-bit mono audio-interface solution with digital gain, a built-in phase-locked loop, and an integrated mono speaker driver. These functions allow a host processor to supply digital audio while the codec manages gain and drives a local loudspeaker. The on-chip digital gain provides a software-adjustable level-control path, while the phase-locked loop supports synchronized digital audio operation within the host system.
What is the operating temperature range of the WM8974CGEFL/V?
The WM8974CGEFL/V operates from -40 °C to +85 °C. Cirrus Logic identifies the codec as a mono audio special-purpose IC with this temperature range in its product listing. Designers should also verify individual electrical limits, clock conditions, and load performance against the manufacturer datasheet for the specific operating point, especially when using the integrated speaker output near its maximum supported load.
What package and footprint does the WM8974CGEFL/V use?
The WM8974CGEFL/V uses a 24-QFN package with an exposed pad, surface mounting, and a 4 mm by 4 mm body. The product listing for this exact MPN confirms the package configuration. The exposed pad must be implemented exactly as shown in the manufacturer footprint drawing, including its electrical-net assignment and thermal-via pattern, because the land pattern controls soldering, heat transfer, and signal return behavior.
Where to buy the WM8974CGEFL/V online?
Use the “Request a Quote” form on this page to ask for the WM8974CGEFL/V, current inventory, minimum order quantity, and delivery availability. The form provides a single route for obtaining a purchasing response without relying on a potentially stale listing. Because availability can vary by lot and package disposition, confirm the manufacturer part number, quantity, delivery date, and traceability requirements before releasing an order.
What is the price of the WM8974CGEFL/V?
Current commercial terms for the WM8974CGEFL/V should be requested through the “Request a Quote” form on this page. The form can capture the required quantity and package quantity, allowing the purchasing team to return an appropriate unit and volume-break structure. Do not rely on a historical listing amount for budgeting because component pricing, availability, and currency conversion can change independently of the device’s technical configuration.
What is the lead time for the WM8974CGEFL/V?
The current lead time for the WM8974CGEFL/V should be confirmed through the “Request a Quote” form on this page. Include the required quantity, target delivery date, and whether multiple date-code-separated lots are acceptable. The device’s 24-QFN package and exposed pad make the complete package description important when requesting supply, because procurement records must match the exact MPN and tape-and-reel or tray disposition.
Is the WM8974CGEFL/V in stock?
Stock status for the WM8974CGEFL/V should be confirmed through the “Request a Quote” form on this page. Submit the required quantity and acceptable delivery date so the response reflects current inventory rather than an old listing count. For production planning, also request date-code, traceability, and lot-information details because availability figures can change between component sourcing channels.
What can replace the WM8974CGEFL/V?
The closest documented same-family replacement is the WM8974CGEFL/RV, which uses the same die and has identical core electrical specifications and package arrangement. However, its ordering and delivery characteristics may differ, so it should be treated as a sourcing alternative rather than an unconditional substitution. Confirm the exact suffix, pinout, package orientation, exposed-pad connection, and tape-and-reel requirements before approving a replacement.
Is the WM8974CGEFL/V the same as the WM8974CGEFL/RV?
The WM8974CGEFL/RV is documented as a same-die, lead-free package variant with identical electrical specifications and pinout relative to the WM8974CGEFL/V. The remaining distinction is ordering or packaging treatment, which can affect reel configuration, labeling, or procurement documentation. Engineers should approve the alternate suffix only after confirming that its ordering code and physical delivery format match the existing assembly process.
WM8974CGEFL/V vs WM8974CGEFL/RV: which is better for an existing PCB?
The WM8974CGEFL/V and WM8974CGEFL/RV are electrically equivalent same-die variants with the same 24-QFN package and pinout. For an existing PCB, either can be used only after confirming the exposed-pad land pattern and all numbered-terminal assignments match the design documentation. Procurement may favor the suffix that is available in the required delivery format; the choice should therefore balance technical equivalence with confirmed supply and lot traceability.
When should I choose the WM8974CGEFL/V instead of a stereo audio codec?
Choose the WM8974CGEFL/V when the product needs one mono playback path with digital gain and an integrated speaker driver rather than a stereo headphone codec. It is well suited to compact industrial sound, voice terminals, audible alerts, and embedded control products where a single loudspeaker simplifies the analog output stage. Choose a stereo codec only when the design genuinely requires two channels, additional output paths, or interfaces not supported by the WM8974.
What are the key specifications of the WM8974CGEFL/V that engineers should know?
The key WM8974CGEFL/V specifications are 24-bit audio resolution, mono operation, an integrated speaker driver, on-chip digital gain, a built-in phase-locked loop, and a -40 °C to +85 °C operating range. The physical implementation is a 4 mm by 4 mm 24-QFN package with an exposed pad. Its 24-bit interface and integrated analog functions reduce the external component count in compact mono-audio designs, while the exposed pad makes PCB thermal design essential.
Can the WM8974CGEFL/V drive a speaker directly?
The WM8974CGEFL/V includes an integrated mono speaker-driver output, allowing a suitable loudspeaker to be connected without relying on the same type of external output amplifier. Actual output power, impedance, distortion, supply requirements, and protection limits must be taken from the manufacturer datasheet before selecting the loudspeaker. The PCB must also preserve the recommended output-network and return-path layout to avoid instability or unwanted noise.

נתוני עזר הנדסיים עבור WM8974CGEFL/V — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the WM8974CGEFL/V when a compact system requires one 24-bit mono audio path, on-chip digital gain, integrated speaker drive, and a built-in phase-locked loop. Its 4 mm by 4 mm 24-QFN package is well suited to industrial panels, communication terminals, smart sensor nodes, and embedded audio-control modules. The integrated speaker driver can reduce board area by eliminating a conventional external output-amplifier stage, although the chosen loudspeaker must remain within the supported electrical and acoustic limits.

The WM8974CGEFL/RV is the closest documented same-family alternative because it uses the same die, core electrical specifications, package, and pinout. Select it when its ordering code, labeling, and physical delivery format satisfy the assembly and procurement requirements. Do not choose a broadly similar stereo codec merely because it also includes a DAC, headphone driver, or digital audio interface; differences in terminal assignment, clocking, supplies, signal routing, and package make those devices functional alternatives rather than drop-in replacements. For an existing board, validate the complete pin list and exposed-pad layout before approving any alternate suffix.

השוואה עם חלופות

פרמטר מוצר זה
Package 24-QFN with exposed pad
Brand Cirrus Logic
Audio Resolution 24 bit
Channel Configuration Mono
Integrated Speaker Driver Yes
Digital Gain On-chip digital gain
Phase-Locked Loop Built-in
Operating Temperature Range -40 °C to +85 °C
Body Size 4 mm x 4 mm
Mounting Type Surface mount

הערות תכנון

Use the manufacturer footprint for the 24-QFN exposed-pad land pattern and thermal-via arrangement. Treat the exposed pad as part of both the mechanical and electrical design: confirm its assigned net from the pin-description table before routing. Place the recommended input, output, and bypass capacitors adjacent to their associated pins, and preserve the documented pin numbering orientation so the package can be assembled without rotation or mirroring.

Do not infer electrical compatibility from the 24-QFN package alone. The built-in phase-locked loop, digital gain, speaker output, clocking, and supply arrangement determine whether a device is truly pin-to-pin compatible. A suitable replacement must match every numbered terminal, the exposed-pad connection, power rails, supported audio interface, and speaker-load requirements. Generic mono codecs identified only as functional equivalents are not acceptable drop-in substitutions.

Keep the codec supply bypass network and analog return path compact, and separate sensitive audio routing from switching-regulator and high-speed digital traces where practical. Follow the manufacturer reference layout for the speaker output network and verify it against the selected speaker impedance. If audible noise, ringing, or distortion appears, inspect clock stability, grounding, decoupling, and output loading before changing gain settings or adding external filtering.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for this exact MPN appears in the cited product information. The WM8974CGEFL/RV cross-reference is described as a lead-free package variant, but that statement was not applied to the target suffix without an explicit target-specific declaration.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

WM8974CGEFL/V datasheet WM8974CGEFL/V pinout WM8974CGEFL/V datasheet pdf WM8974CGEFL/V equivalent WM8974CGEFL/V replacement WM8974CGEFL/V cross reference WM8974CGEFL/V footprint WM8974CGEFL/V price WM8974CGEFL/V stock Cirrus Logic WM8974CGEFL/V WM8974 24-bit mono codec WM8974CGEFL/V speaker driver

רכיבים ומונחים קשורים

Cirrus Logic WM8974CGEFL/V WM8974CGEFL/RV Wolfson Microelectronics 24-bit mono audio codec audio codec mixed-signal IC interface IC semiconductor integrated speaker driver on-chip digital gain phase-locked loop 24-QFN QFN package family surface mount SMD exposed pad speaker output digital audio interface industrial alarm building-control voice panel communication terminal smart sensor node -40 °C to +85 °C
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר