AMD

XA3S1600E-4FG400I - 1.6M-Gate Automotive FPGA | AMD

Référence : XA3S1600E-4FG400I ✓ Actif
400-ball BGA Package -4 speed grade Speed
MOQ : 1 |

XA3S1600E-4FG400I Présentation

The AMD XA3S1600E-4FG400I is an automotive Spartan-3E XA field-programmable gate array with 1,600,000 gates, 33,192 logic elements, 663,552 RAM bits, and 304 user I/O pins in a 400-ball BGA package. The -4 speed designation identifies its performance grade within the Spartan-3E family, while the XA prefix identifies the automotive-oriented family.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combines configurable logic blocks and block RAM, and provides a higher level of integration than multiple discrete logic devices. The Spartan-3E XA family targets cost-sensitive automotive electronics requiring deterministic logic resources, parallel I/O, and programmable system integration.

The XA3S1600E-4FG400I provides 3,688 logic array blocks, also described as configurable logic blocks, with 33,192 logic elements and 663,552 total RAM bits. Its 304 user I/O pins support integration with automotive sensors, actuator controllers, body and comfort systems, communication interfaces, and electronic control units. A 400-ball BGA package also supports dense board routing and high I/O density.

The architecture combines programmable logic fabric with dedicated memory resources, allowing parallel datapaths, protocol handling, state machines, and control functions to be consolidated in one device. The automotive XA family is intended for high-volume, cost-sensitive applications where integration reduces component count and simplifies PCB assembly. Exact operating-temperature, voltage, power, and configuration limits must be checked in the manufacturer datasheet for the installed grade.

Typical uses include engine or transmission control modules, motor and valve drivers, vehicle networking, body-control modules, sensor fusion, and industrial automation equipment requiring high I/O density. The 304 available user I/O pins are particularly useful when multiple sensors, actuators, communication transceivers, and diagnostic signals must share one controller.

PCB design should follow the manufacturer's ball-map, power, decoupling, configuration, and clocking guidelines. The 400-ball package demands careful escape-routing and multilayer-layer planning, while the automotive application requires attention to thermal margins, transient protection, and configuration-startup behavior. Confirm the exact design suffix and qualification requirements before releasing a production BOM.

This page combines package, logic, RAM, and I/O details with replacement guidance and implementation-oriented design notes. It also distinguishes verified drop-in alternatives from lower-package-count devices that require a PCB redesign, helping engineers make faster sourcing and hardware decisions.

Alternatives de remplacement direct pour XA3S1600E-4FG400I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec XA3S1600E-4FG400I (même facteur de forme et même empreinte) — différant par Device Family, Device Type, Package, Speed Grade, User I/O.

AMD
Device Family: Spartan-3E
Device Type: Field-Programmable Gate Array (FPGA)
Package: 400-ball FBGA
Comparer avec XA3S1600E-4FG400I →

XA3S1600E-4FGG400I

✅ Remplacement direct
📦 400-BGA
Same 400-BGA footprint and Spartan-3E XA resource structure; suffix differences affect ordering and qualification details by 0% in core logic, RAM, and I/O counts

📋 Alternative de référence (hors catalogue)

XA3S1600E-4FGG400Q

✅ Remplacement direct
📦 400-BGA
Same 400-BGA Spartan-3E XA footprint with 33,192 logic elements, 663,552 RAM bits, and 304 I/O; terminal suffix changes ordering qualification by 0% in core resources

📋 Alternative de référence (hors catalogue)

XC3S1600E-4FG400I

✅ Remplacement direct
AMD
📦 400-BGA
Field-Programmable Gate Array (FPGA) · Spartan-3E · 33,192 cells · 3,688 CLBs · 1.6 million gates · 304 I/O · 572 MHz · 1.14 V to 1.26 V

Contactez-nous pour le prix

Voir la fiche technique →

XC3S1600E-4FGG400I

✅ Remplacement direct
📦 400-BGA
Same 400-BGA Spartan-3E footprint with matching -4 resource level; commercial XC qualification differs by 0% in logic, RAM, and I/O counts

📋 Alternative de référence (hors catalogue)

XC3S1600E-4FGG400C

✅ Remplacement direct
📦 400-BGA
Same 400-BGA Spartan-3E package and -4 core resource level; commercial XC family and suffix qualification differ by 0% in core parameters

📋 Alternative de référence (hors catalogue)

XA3S1600E-4FG400I Valeurs maximales et caractéristiques électriques

Device Type Spartan-3E XA FPGA
Number of Gates 1,600,000 gates
Logic Elements 33,192 logic elements
Logic Array Blocks 3,688 LABs/CLBs
Total RAM 663,552 RAM bits
User I/O 304 user I/O pins
Speed Grade -4 speed grade
Boîtier 400-ball BGA
Device Family Spartan-3E XA
Product Qualification Automotive Grade
Type de montage Surface Mount
Statut RoHS RoHS Non-Compliant
Lead-Free Status Contains Lead

Guide de configuration des broches du XA3S1600E-4FG400I 400-ball bga

Configuration des broches du XA3S1600E-4FG400I (boîtier 400-ball bga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 400-ball bga pour le XA3S1600E-4FG400I

Aucune donnée de brochage détaillée disponible pour XA3S1600E-4FG400I.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XA3S1600E-4FG400I convient pour 6 applications: Automotive Engine Control, Vehicle Body Control Module, Motor and Valve Drive Controller, Automotive Sensor Fusion Node, Industrial Automation Controller, Vehicle Network Gateway.

🚗

Automotive Engine Control

The XA3S1600E-4FG400I fits an automotive engine-control module requiring substantial parallel I/O and programmable logic without the overhead of a larger processor. Its 33,192 logic elements can implement sensor conditioning, actuator timing, diagnostic logic, and communication protocols, while 663,552 RAM bits support buffers, lookup tables, and state machines. The 304 user I/O pins support numerous crank, camshaft, temperature, pressure, and injector connections. In a multilayer board, the 400-ball BGA allows dense routing while reducing component count. Automotive qualification, transient protection, thermal performance, and configuration retention must be validated for the exact product suffix.

🚗

Vehicle Body Control Module

The XA3S1600E-4FG400I is suitable for a body-control module that consolidates switch inputs, latch logic, lighting control, door sequencing, and diagnostic functions. Its 304 user I/O pins provide substantial parallel connectivity, while 33,192 logic elements can support several independent control domains and communication peripherals. The 663,552 RAM bits are useful for packet buffering and multiplexed state management. Using one high-density FPGA can reduce routing complexity compared with several smaller controllers. The implementation should reserve dedicated pins for configuration, watchdog monitoring, diagnostic communication, and fail-safe shutdown, while applying the manufacturer’s automotive power, grounding, and decoupling recommendations.

🏭

Motor and Valve Drive Controller

The XA3S1600E-4FG400I can coordinate multiple motor-control subsystems through parallel digital command paths and high-speed programmable logic. The 33,192 logic elements are well suited to PWM generation, direction decoding, current-command sequencing, fault capture, and closed-loop control assistance, while 663,552 RAM bits support timing tables and diagnostic history. With 304 user I/O pins, the device can connect multiple gate drivers, position sensors, and protection signals without extreme lane concentration. Because motor environments experience electrical transients and temperature variation, the design should include suitable isolation, surge protection, thermal analysis, and safe-state shutdown independent of the FPGA configuration state.

🧩

Automotive Sensor Fusion Node

The XA3S1600E-4FG400I can act as the central programmable node for combining outputs from multiple vehicle sensors. Its programmable fabric can perform sensor-output conditioning, timestamp correlation, plausibility checking, and fault detection, while the 663,552 RAM bits provide local buffering for concurrent data streams. The 304 user I/O pins accommodate digital sensors, communication transceivers, and discrete status inputs, making the device suitable for a compact central node rather than a collection of fixed-function controllers. The FPGA’s -4 speed grade supports timing-sensitive logic, but actual clock and I/O timing margins must be verified with the appropriate speed-grade tables and external interface specifications.

🏭

Industrial Automation Controller

The XA3S1600E-4FG400I can serve as a high-I/O industrial automation controller when a new design intentionally uses the automotive Spartan-3E XA family. Its 33,192 logic elements support motion sequencing, interlocks, communications, and data acquisition, while 304 user I/O pins simplify connection to sensors, relays, counters, and operator interfaces. The 400-ball BGA improves routing density for complex control boards but requires a multilayer PCB and disciplined power distribution. Industrial suitability depends on the exact temperature range, lifecycle status, qualification profile, and long-term availability. If the system does not require XA automotive qualification, the related XC3S1600E options may offer a more appropriate commercial sourcing path.

🌐

Vehicle Network Gateway

The XA3S1600E-4FG400I is well suited to a vehicle network gateway that must bridge multiple communication domains and monitor bus activity. Programmable logic can implement frame filtering, routing tables, protocol conversion, diagnostics, and fault logging, while 663,552 RAM bits accommodate receive buffers and message queues. The 304 user I/O pins allow the device to interface with several transceivers and control signals in a centralized architecture. Configuration must be designed for deterministic startup and recovery, including a safe bus-inactive state if the FPGA fails to configure. Board-level considerations include transceiver standby control, EMC protection, ground continuity, and the timing relationship between the FPGA and external network interfaces.

Récapitulatif des produits recommandés

XA3S1600E-4FG400I AMD Utilisé dans : Automotive Engine Control, Motor and Valve Drive Controller, Automotive Sensor Fusion Node, Industrial Automation Controller, Vehicle Network Gateway XA3S1600E-4FGG400I Same-family package alternative Utilisé dans : Automotive Engine Control, Vehicle Body Control Module, Vehicle Network Gateway XC3S1600E-4FG400I AMD Utilisé dans : Vehicle Body Control Module XA3S1600E-4FGG400Q Same-family 400-BGA alternative Utilisé dans : Motor and Valve Drive Controller XC3S1600E-4FGG400I Spartan-3E package alternative Utilisé dans : Automotive Sensor Fusion Node XC3S1600E-4FGG400C Commercial Spartan-3E alternative Utilisé dans : Industrial Automation Controller
What are the key specifications of XA3S1600E-4FG400I?
The XA3S1600E-4FG400I is an AMD Spartan-3E XA automotive FPGA with 1,600,000 gates, 33,192 logic elements, 3,688 LABs/CLBs, 663,552 RAM bits, and 304 user I/O pins. It is packaged in a 400-ball BGA. According to the manufacturer product information, the -4 code denotes the performance grade, while the XA family is intended for cost-sensitive automotive applications.
Where can I download the XA3S1600E-4FG400I datasheet PDF?
The XA3S1600E-4FG400I datasheet can be accessed through the AMD and Xilinx datasheet entry linked on this page. The document should be used to verify the ball map, recommended power rails, configuration requirements, electrical limits, operating temperature, and package dimensions before PCB release. Use the manufacturer datasheet rather than distributor summaries when assigning power or I/O signals.
What is the XA3S1600E-4FG400I pinout and package?
The XA3S1600E-4FG400I uses a 400-ball BGA package with 304 user I/O pins. Its complete numbered ball map, power balls, configuration pins, and exposed thermal requirements must be taken from the manufacturer package drawing and pin-description tables. No complete ball-level pinout is published on this page, so PCB routing should begin only after checking the exact XA3S1600E-4FG400I datasheet.
Where can I buy XA3S1600E-4FG400I online?
The XA3S1600E-4FG400I can be requested through the Request a Quote form on this page. The form supports current sourcing without embedding a static price that may change with quantity, condition, or market availability. For production procurement, specify the required quantity, date code, traceable condition, and whether automotive qualification documentation is needed.
What is the price of XA3S1600E-4FG400I?
Use the Request a Quote form on this page for the current XA3S1600E-4FG400I price. Pricing for this large automotive FPGA can vary with quantity, sourcing condition, traceability, and delivery schedule. The structured offer on this page is updated separately, while the quotation form captures the exact quantity and supply requirements for the intended design.
What is the lead time for XA3S1600E-4FG400I?
The current lead time for XA3S1600E-4FG400I must be confirmed through the Request a Quote form on this page. Lead time can depend on device condition, traceable inventory, production allocation, and the requested delivery date. Provide the forecast quantity and required milestone dates so the supplier can return an actionable schedule.
Is XA3S1600E-4FG400I in stock?
Current XA3S1600E-4FG400I inventory should be confirmed through the Request a Quote form on this page. Availability can change quickly for automotive FPGA orders, particularly when traceable or programmed stock is required. State whether the device must be new, traceable, programmed, or delivered in a specific date code before accepting a quotation.
What can replace XA3S1600E-4FG400I?
The closest drop-in candidates are the 400-ball Spartan-3E variants XC3S1600E-4FG400I, XA3S1600E-4FGG400I, XC3S1600E-4FGG400I, and XA3S1600E-4FGG400Q. They retain the large 400-ball package and closely related Spartan-3E architecture, but suffix differences can alter qualification, temperature, or lead-finish requirements. Compare the manufacturer ordering table before substitution.
Can XC3S1600E-4FG400I replace XA3S1600E-4FG400I?
XC3S1600E-4FG400I is a pin-compatible Spartan-3E option in the same 400-ball package, but it is not automatically an automotive-qualified substitute for the XA part. The XA3S1600E-4FG400I belongs to the automotive Spartan-3E family, whereas the XC designation identifies the commercial family. Approval requires checking qualification, temperature, lifecycle, and program constraints.
XA3S1600E-4FG400I vs XC3S1600E-4FG400I — which is better for automotive use?
The XA3S1600E-4FG400I is the better choice when the design specifically requires the automotive Spartan-3E XA qualification and sourcing profile. Both devices are associated with 33,192 logic elements, 663,552 RAM bits, 304 user I/O pins, a -4 grade, and a 400-ball BGA. The XC3S1600E-4FG400I may fit non-automotive designs, but automotive selection must account for qualification and traceability.
When should I choose XA3S1600E-4FG400I over XC3S1600E-4FGG400I?
Choose the XA3S1600E-4FG400I when the automotive Spartan-3E XA product line is required by the system specification. The XC3S1600E-4FGG400I retains the same 400-ball architecture and primary resource counts, but it belongs to the XC family and may not satisfy an automotive qualification requirement. The decision should be based on the manufacturer's ordering information and end-market certification rules.
Is XA3S1600E-4FG400I suitable for automotive control units?
Yes, the XA3S1600E-4FG400I is designed for automotive applications that benefit from 33,192 logic elements, 663,552 RAM bits, and 304 user I/O pins in one 400-ball BGA. It can support control logic, sensor interfaces, actuator sequencing, and vehicle-network functions. Final suitability still depends on the specific automotive qualification grade, temperature range, and lifetime requirements.
Can a non-AMD FPGA directly replace XA3S1600E-4FG400I?
No verified cross-manufacturer drop-in replacement is identified for the XA3S1600E-4FG400I. A non-AMD FPGA with a different logic architecture, configuration system, memory map, or ball assignment would generally require PCB and firmware changes even if it offered comparable gate counts. The documented replacement path is the Spartan-3E family with matching 400-ball package options.
What design resources are needed for XA3S1600E-4FG400I?
The implementation should use the manufacturer datasheet, package pinout, configuration guide, and recommended PCB layout information for the exact suffix. The 400-ball BGA requires multilayer escape routing, deliberate power and ground planes, local decoupling, and careful clock distribution. Because configuration, automotive qualification, and temperature limits are design-critical, use the exact ordering documentation rather than a generic Spartan-3E document.
Is XA3S1600E-4FG400I RoHS compliant?
The XA3S1600E-4FG400I is listed as RoHS Non-Compliant and as containing lead. This status is important for automotive and industrial procurement programs because it may require an exemption, legacy-vehicle rationale, or separate environmental review. Confirm current regulatory status and applicable exemptions with the manufacturer before releasing the component into a new production design.

Données de référence d'ingénierie pour XA3S1600E-4FG400I — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the XA3S1600E-4FG400I when an automotive control system requires the Spartan-3E XA family and a high-density 400-ball BGA with 304 user I/O pins. The XA3S1600E-4FGG400I and XA3S1600E-4FGG400Q are the closest same-family options when their ordering and qualification details satisfy the system requirements. Consider XC3S1600E-4FG400I, XC3S1600E-4FGG400I, or XC3S1600E-4FGG400C for designs that do not require the automotive XA profile. Do not select smaller-package Spartan-3E devices as drop-in replacements; reduced ball count and different I/O allocation require a PCB redesign. In every case, verify the exact suffix, temperature grade, qualification status, lifecycle plan, configuration compatibility, and timing constraints before approving a substitution.

Comparaison avec les alternatives

Paramètre Ce produit XA3S1600E-4FGG400I XA3S1600E-4FGG400Q XC3S1600E-4FG400I XC3S1600E-4FGG400I XC3S1600E-4FGG400C
Package 400-BGA 400-BGA 400-BGA 400-BGA 400-BGA 400-BGA
Brand AMD AMD AMD AMD AMD AMD
FPGA Family Spartan-3E XA Spartan-3E XA Spartan-3E XA Spartan-3E Spartan-3E Spartan-3E
Speed Grade -4 -4 -4 -4 -4 -4
Special Features Automotive Spartan-3E XA Automotive Spartan-3E XA Automotive Spartan-3E XA Commercial Spartan-3E Commercial Spartan-3E Commercial Spartan-3E

Principaux différenciateurs

  • Combines automotive XA positioning with 304 user I/O pins (vs XC3S1600E-4FG400I)
  • High-density logic and memory integration (vs XA3S250E-4FTG256I)
  • Same-family ordering alternatives preserve PCB compatibility (vs XA3S1600E-4FGG400I)

Notes de conception

Treat the 400-ball BGA as a multilayer-routing problem. Use the manufacturer’s ball map and recommended layer stack to plan power, ground, signal, and escape routing before placement. Keep high-speed clock and sensitive configuration paths short, avoid splits beneath the device, and preserve uninterrupted reference planes. Validate layer transitions, via-in-pad requirements, and solder-mask assembly rules with the board fabricator.

Implement the power architecture from the exact manufacturer datasheet, including every required supply rail and its sequencing relationship. Place bulk and high-frequency decoupling capacitors close to the associated BGA power balls, and provide low-impedance vias into the internal planes. Review voltage tolerances, startup current, configuration behavior, and power-source impedance rather than assuming the board connector can supply configuration and I/O loads.

Estimate worst-case junction temperature from FPGA power, ambient temperature, package thermal characteristics, PCB copper, and airflow. The 400-ball package can dissipate substantial power across numerous internal power and ground balls, so spreading vias and enlarging exposed copper areas may be necessary. Use the manufacturer thermal model for the final stack-up and enclosure, and confirm the result against the maximum operating temperature of the selected suffix.

Do not substitute the XA automotive part for an XC commercial part, or vice versa, solely because both use a 400-ball package. Confirm the ordering code, qualification profile, temperature range, lead finish, lifecycle status, and configuration compatibility. Also verify that the programmed bitstream and pin constraints are valid for the exact replacement; identical package geometry does not by itself establish regulatory or lifecycle equivalence.

Informations de conformité

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Qualified
Sans plomb
No
Sans halogène
Unknown
Minerais de conflit
Unknown

The XA3S1600E-4FG400I is listed as RoHS Non-Compliant and contains lead. It is an automotive-grade Spartan-3E XA FPGA. Confirm the exact AEC-Q100 qualification grade and any applicable regulatory exemptions in the manufacturer documentation.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

XA3S1600E-4FG400I datasheet XA3S1600E-4FG400I pinout XA3S1600E-4FG400I datasheet pdf XA3S1600E-4FG400I equivalent XA3S1600E-4FG400I replacement XA3S1600E-4FG400I footprint AMD XA3S1600E-4FG400I XA3S1600E-4FG400I 400 BGA XA3S1600E-4FG400I 304 I/O XA3S1600E-4FG400I automotive FPGA XA3S1600E-4FG400I price XA3S1600E-4FG400I stock XA3S1600E-4FG400I vs XC3S1600E-4FG400I XA3S1600E automotive control application

Composants & termes associés

AMD Xilinx XA3S1600E-4FG400I XA3S1600E-4FGG400I XA3S1600E-4FGG400Q XC3S1600E-4FG400I XC3S1600E-4FGG400I XC3S1600E-4FGG400C Spartan-3E XA Spartan-3E FPGA field-programmable gate array programmable logic logic array block configurable logic block block RAM 400-ball BGA BGA package family surface-mount package 304 user I/O pins automotive electronics vehicle control unit RoHS AEC-Q100 REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ