XA3S1600E-4FG400I - 1.6M-Gate Automotive FPGA | AMD
MPN: XA3S1600E-4FG400I ✓ Hoạt độngXA3S1600E-4FG400I Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combines configurable logic blocks and block RAM, and provides a higher level of integration than multiple discrete logic devices. The Spartan-3E XA family targets cost-sensitive automotive electronics requiring deterministic logic resources, parallel I/O, and programmable system integration.
The XA3S1600E-4FG400I provides 3,688 logic array blocks, also described as configurable logic blocks, with 33,192 logic elements and 663,552 total RAM bits. Its 304 user I/O pins support integration with automotive sensors, actuator controllers, body and comfort systems, communication interfaces, and electronic control units. A 400-ball BGA package also supports dense board routing and high I/O density.
The architecture combines programmable logic fabric with dedicated memory resources, allowing parallel datapaths, protocol handling, state machines, and control functions to be consolidated in one device. The automotive XA family is intended for high-volume, cost-sensitive applications where integration reduces component count and simplifies PCB assembly. Exact operating-temperature, voltage, power, and configuration limits must be checked in the manufacturer datasheet for the installed grade.
Typical uses include engine or transmission control modules, motor and valve drivers, vehicle networking, body-control modules, sensor fusion, and industrial automation equipment requiring high I/O density. The 304 available user I/O pins are particularly useful when multiple sensors, actuators, communication transceivers, and diagnostic signals must share one controller.
PCB design should follow the manufacturer's ball-map, power, decoupling, configuration, and clocking guidelines. The 400-ball package demands careful escape-routing and multilayer-layer planning, while the automotive application requires attention to thermal margins, transient protection, and configuration-startup behavior. Confirm the exact design suffix and qualification requirements before releasing a production BOM.
This page combines package, logic, RAM, and I/O details with replacement guidance and implementation-oriented design notes. It also distinguishes verified drop-in alternatives from lower-package-count devices that require a PCB redesign, helping engineers make faster sourcing and hardware decisions.
Bộ thay thế dễ dàng lắp đặt cho XA3S1600E-4FG400I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XA3S1600E-4FG400I (cùng hình factor và footprint) — khác nhau ở Device Family, Device Type, Package, Speed Grade, User I/O.
XA3S1600E-4FGG400I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XA3S1600E-4FGG400Q
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S1600E-4FG400I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S1600E-4FGG400I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S1600E-4FGG400C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XA3S1600E-4FG400I Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-3E XA FPGA |
| Number of Gates | 1,600,000 gates |
| Logic Elements | 33,192 logic elements |
| Logic Array Blocks | 3,688 LABs/CLBs |
| Total RAM | 663,552 RAM bits |
| User I/O | 304 user I/O pins |
| Speed Grade | -4 speed grade |
| Hộp | 400-ball BGA |
| Device Family | Spartan-3E XA |
| Product Qualification | Automotive Grade |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | RoHS Non-Compliant |
| Lead-Free Status | Contains Lead |
Hướng dẫn cấu hình chân XA3S1600E-4FG400I 400-ball bga
Cấu hình chân cho XA3S1600E-4FG400I (400-ball bga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XA3S1600E-4FG400I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XA3S1600E-4FG400I phù hợp cho 6 Áp dụngs: Automotive Engine Control, Vehicle Body Control Module, Motor and Valve Drive Controller, Automotive Sensor Fusion Node, Industrial Automation Controller, Vehicle Network Gateway.
Automotive Engine Control
The XA3S1600E-4FG400I fits an automotive engine-control module requiring substantial parallel I/O and programmable logic without the overhead of a larger processor. Its 33,192 logic elements can implement sensor conditioning, actuator timing, diagnostic logic, and communication protocols, while 663,552 RAM bits support buffers, lookup tables, and state machines. The 304 user I/O pins support numerous crank, camshaft, temperature, pressure, and injector connections. In a multilayer board, the 400-ball BGA allows dense routing while reducing component count. Automotive qualification, transient protection, thermal performance, and configuration retention must be validated for the exact product suffix.
Được đề xuất
Vehicle Body Control Module
The XA3S1600E-4FG400I is suitable for a body-control module that consolidates switch inputs, latch logic, lighting control, door sequencing, and diagnostic functions. Its 304 user I/O pins provide substantial parallel connectivity, while 33,192 logic elements can support several independent control domains and communication peripherals. The 663,552 RAM bits are useful for packet buffering and multiplexed state management. Using one high-density FPGA can reduce routing complexity compared with several smaller controllers. The implementation should reserve dedicated pins for configuration, watchdog monitoring, diagnostic communication, and fail-safe shutdown, while applying the manufacturer’s automotive power, grounding, and decoupling recommendations.
Được đề xuất
Motor and Valve Drive Controller
The XA3S1600E-4FG400I can coordinate multiple motor-control subsystems through parallel digital command paths and high-speed programmable logic. The 33,192 logic elements are well suited to PWM generation, direction decoding, current-command sequencing, fault capture, and closed-loop control assistance, while 663,552 RAM bits support timing tables and diagnostic history. With 304 user I/O pins, the device can connect multiple gate drivers, position sensors, and protection signals without extreme lane concentration. Because motor environments experience electrical transients and temperature variation, the design should include suitable isolation, surge protection, thermal analysis, and safe-state shutdown independent of the FPGA configuration state.
Được đề xuất
Automotive Sensor Fusion Node
The XA3S1600E-4FG400I can act as the central programmable node for combining outputs from multiple vehicle sensors. Its programmable fabric can perform sensor-output conditioning, timestamp correlation, plausibility checking, and fault detection, while the 663,552 RAM bits provide local buffering for concurrent data streams. The 304 user I/O pins accommodate digital sensors, communication transceivers, and discrete status inputs, making the device suitable for a compact central node rather than a collection of fixed-function controllers. The FPGA’s -4 speed grade supports timing-sensitive logic, but actual clock and I/O timing margins must be verified with the appropriate speed-grade tables and external interface specifications.
Được đề xuất
Industrial Automation Controller
The XA3S1600E-4FG400I can serve as a high-I/O industrial automation controller when a new design intentionally uses the automotive Spartan-3E XA family. Its 33,192 logic elements support motion sequencing, interlocks, communications, and data acquisition, while 304 user I/O pins simplify connection to sensors, relays, counters, and operator interfaces. The 400-ball BGA improves routing density for complex control boards but requires a multilayer PCB and disciplined power distribution. Industrial suitability depends on the exact temperature range, lifecycle status, qualification profile, and long-term availability. If the system does not require XA automotive qualification, the related XC3S1600E options may offer a more appropriate commercial sourcing path.
Được đề xuất
Vehicle Network Gateway
The XA3S1600E-4FG400I is well suited to a vehicle network gateway that must bridge multiple communication domains and monitor bus activity. Programmable logic can implement frame filtering, routing tables, protocol conversion, diagnostics, and fault logging, while 663,552 RAM bits accommodate receive buffers and message queues. The 304 user I/O pins allow the device to interface with several transceivers and control signals in a centralized architecture. Configuration must be designed for deterministic startup and recovery, including a safe bus-inactive state if the FPGA fails to configure. Board-level considerations include transceiver standby control, EMC protection, ground continuity, and the timing relationship between the FPGA and external network interfaces.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XA3S1600E-4FG400I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XA3S1600E-4FGG400I | XA3S1600E-4FGG400Q | XC3S1600E-4FG400I | XC3S1600E-4FGG400I | XC3S1600E-4FGG400C |
|---|---|---|---|---|---|---|
| Package | 400-BGA | 400-BGA | 400-BGA | 400-BGA | 400-BGA | 400-BGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3E XA | Spartan-3E XA | Spartan-3E XA | Spartan-3E | Spartan-3E | Spartan-3E |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Special Features | Automotive Spartan-3E XA | Automotive Spartan-3E XA | Automotive Spartan-3E XA | Commercial Spartan-3E | Commercial Spartan-3E | Commercial Spartan-3E |
Bảo phân biệt quan trọng
- Combines automotive XA positioning with 304 user I/O pins (vsXC3S1600E-4FG400I)
- High-density logic and memory integration (vsXA3S250E-4FTG256I)
- Same-family ordering alternatives preserve PCB compatibility (vsXA3S1600E-4FGG400I)
Ghi chú thiết kế
Treat the 400-ball BGA as a multilayer-routing problem. Use the manufacturer’s ball map and recommended layer stack to plan power, ground, signal, and escape routing before placement. Keep high-speed clock and sensitive configuration paths short, avoid splits beneath the device, and preserve uninterrupted reference planes. Validate layer transitions, via-in-pad requirements, and solder-mask assembly rules with the board fabricator.
Implement the power architecture from the exact manufacturer datasheet, including every required supply rail and its sequencing relationship. Place bulk and high-frequency decoupling capacitors close to the associated BGA power balls, and provide low-impedance vias into the internal planes. Review voltage tolerances, startup current, configuration behavior, and power-source impedance rather than assuming the board connector can supply configuration and I/O loads.
Estimate worst-case junction temperature from FPGA power, ambient temperature, package thermal characteristics, PCB copper, and airflow. The 400-ball package can dissipate substantial power across numerous internal power and ground balls, so spreading vias and enlarging exposed copper areas may be necessary. Use the manufacturer thermal model for the final stack-up and enclosure, and confirm the result against the maximum operating temperature of the selected suffix.
Do not substitute the XA automotive part for an XC commercial part, or vice versa, solely because both use a 400-ball package. Confirm the ordering code, qualification profile, temperature range, lead finish, lifecycle status, and configuration compatibility. Also verify that the programmed bitstream and pin constraints are valid for the exact replacement; identical package geometry does not by itself establish regulatory or lifecycle equivalence.
Thông tin tuân thủ
The XA3S1600E-4FG400I is listed as RoHS Non-Compliant and contains lead. It is an automotive-grade Spartan-3E XA FPGA. Confirm the exact AEC-Q100 qualification grade and any applicable regulatory exemptions in the manufacturer documentation.