XA3S1600E-4FG400I - 1.6M-Gate Automotive FPGA | AMD
부품 번호: XA3S1600E-4FG400I ✓ 활성XA3S1600E-4FG400I 개요
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combines configurable logic blocks and block RAM, and provides a higher level of integration than multiple discrete logic devices. The Spartan-3E XA family targets cost-sensitive automotive electronics requiring deterministic logic resources, parallel I/O, and programmable system integration.
The XA3S1600E-4FG400I provides 3,688 logic array blocks, also described as configurable logic blocks, with 33,192 logic elements and 663,552 total RAM bits. Its 304 user I/O pins support integration with automotive sensors, actuator controllers, body and comfort systems, communication interfaces, and electronic control units. A 400-ball BGA package also supports dense board routing and high I/O density.
The architecture combines programmable logic fabric with dedicated memory resources, allowing parallel datapaths, protocol handling, state machines, and control functions to be consolidated in one device. The automotive XA family is intended for high-volume, cost-sensitive applications where integration reduces component count and simplifies PCB assembly. Exact operating-temperature, voltage, power, and configuration limits must be checked in the manufacturer datasheet for the installed grade.
Typical uses include engine or transmission control modules, motor and valve drivers, vehicle networking, body-control modules, sensor fusion, and industrial automation equipment requiring high I/O density. The 304 available user I/O pins are particularly useful when multiple sensors, actuators, communication transceivers, and diagnostic signals must share one controller.
PCB design should follow the manufacturer's ball-map, power, decoupling, configuration, and clocking guidelines. The 400-ball package demands careful escape-routing and multilayer-layer planning, while the automotive application requires attention to thermal margins, transient protection, and configuration-startup behavior. Confirm the exact design suffix and qualification requirements before releasing a production BOM.
This page combines package, logic, RAM, and I/O details with replacement guidance and implementation-oriented design notes. It also distinguishes verified drop-in alternatives from lower-package-count devices that require a PCB redesign, helping engineers make faster sourcing and hardware decisions.
드롭인 대체품: XA3S1600E-4FG400I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XA3S1600E-4FG400I (동일 폼 팩터 및 풋프린트) — 차이점: Device Family, Device Type, Package, Speed Grade, User I/O.
XA3S1600E-4FGG400I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XA3S1600E-4FGG400Q
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S1600E-4FG400I
✅ 드롭인가격 문의
데이터시트 보기 →XC3S1600E-4FGG400I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S1600E-4FGG400C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XA3S1600E-4FG400I 최대 정격 & 전기적 특성
| Device Type | Spartan-3E XA FPGA |
| Number of Gates | 1,600,000 gates |
| Logic Elements | 33,192 logic elements |
| Logic Array Blocks | 3,688 LABs/CLBs |
| Total RAM | 663,552 RAM bits |
| User I/O | 304 user I/O pins |
| Speed Grade | -4 speed grade |
| 패키지 | 400-ball BGA |
| Device Family | Spartan-3E XA |
| Product Qualification | Automotive Grade |
| 실장 유형 | Surface Mount |
| RoHS 상태 | RoHS Non-Compliant |
| Lead-Free Status | Contains Lead |
XA3S1600E-4FG400I 400-ball bga 핀 구성 가이드
XA3S1600E-4FG400I(400-ball bga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XA3S1600E-4FG400I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XA3S1600E-4FG400I 적합 용도: 6 애플리케이션s: Automotive Engine Control, Vehicle Body Control Module, Motor and Valve Drive Controller, Automotive Sensor Fusion Node, Industrial Automation Controller, Vehicle Network Gateway.
Automotive Engine Control
The XA3S1600E-4FG400I fits an automotive engine-control module requiring substantial parallel I/O and programmable logic without the overhead of a larger processor. Its 33,192 logic elements can implement sensor conditioning, actuator timing, diagnostic logic, and communication protocols, while 663,552 RAM bits support buffers, lookup tables, and state machines. The 304 user I/O pins support numerous crank, camshaft, temperature, pressure, and injector connections. In a multilayer board, the 400-ball BGA allows dense routing while reducing component count. Automotive qualification, transient protection, thermal performance, and configuration retention must be validated for the exact product suffix.
추천
Vehicle Body Control Module
The XA3S1600E-4FG400I is suitable for a body-control module that consolidates switch inputs, latch logic, lighting control, door sequencing, and diagnostic functions. Its 304 user I/O pins provide substantial parallel connectivity, while 33,192 logic elements can support several independent control domains and communication peripherals. The 663,552 RAM bits are useful for packet buffering and multiplexed state management. Using one high-density FPGA can reduce routing complexity compared with several smaller controllers. The implementation should reserve dedicated pins for configuration, watchdog monitoring, diagnostic communication, and fail-safe shutdown, while applying the manufacturer’s automotive power, grounding, and decoupling recommendations.
추천
Motor and Valve Drive Controller
The XA3S1600E-4FG400I can coordinate multiple motor-control subsystems through parallel digital command paths and high-speed programmable logic. The 33,192 logic elements are well suited to PWM generation, direction decoding, current-command sequencing, fault capture, and closed-loop control assistance, while 663,552 RAM bits support timing tables and diagnostic history. With 304 user I/O pins, the device can connect multiple gate drivers, position sensors, and protection signals without extreme lane concentration. Because motor environments experience electrical transients and temperature variation, the design should include suitable isolation, surge protection, thermal analysis, and safe-state shutdown independent of the FPGA configuration state.
추천
Automotive Sensor Fusion Node
The XA3S1600E-4FG400I can act as the central programmable node for combining outputs from multiple vehicle sensors. Its programmable fabric can perform sensor-output conditioning, timestamp correlation, plausibility checking, and fault detection, while the 663,552 RAM bits provide local buffering for concurrent data streams. The 304 user I/O pins accommodate digital sensors, communication transceivers, and discrete status inputs, making the device suitable for a compact central node rather than a collection of fixed-function controllers. The FPGA’s -4 speed grade supports timing-sensitive logic, but actual clock and I/O timing margins must be verified with the appropriate speed-grade tables and external interface specifications.
추천
Industrial Automation Controller
The XA3S1600E-4FG400I can serve as a high-I/O industrial automation controller when a new design intentionally uses the automotive Spartan-3E XA family. Its 33,192 logic elements support motion sequencing, interlocks, communications, and data acquisition, while 304 user I/O pins simplify connection to sensors, relays, counters, and operator interfaces. The 400-ball BGA improves routing density for complex control boards but requires a multilayer PCB and disciplined power distribution. Industrial suitability depends on the exact temperature range, lifecycle status, qualification profile, and long-term availability. If the system does not require XA automotive qualification, the related XC3S1600E options may offer a more appropriate commercial sourcing path.
추천
Vehicle Network Gateway
The XA3S1600E-4FG400I is well suited to a vehicle network gateway that must bridge multiple communication domains and monitor bus activity. Programmable logic can implement frame filtering, routing tables, protocol conversion, diagnostics, and fault logging, while 663,552 RAM bits accommodate receive buffers and message queues. The 304 user I/O pins allow the device to interface with several transceivers and control signals in a centralized architecture. Configuration must be designed for deterministic startup and recovery, including a safe bus-inactive state if the FPGA fails to configure. Board-level considerations include transceiver standby control, EMC protection, ground continuity, and the timing relationship between the FPGA and external network interfaces.
추천
추천 제품 요약
엔지니어링 참조 데이터: XA3S1600E-4FG400I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XA3S1600E-4FGG400I | XA3S1600E-4FGG400Q | XC3S1600E-4FG400I | XC3S1600E-4FGG400I | XC3S1600E-4FGG400C |
|---|---|---|---|---|---|---|
| Package | 400-BGA | 400-BGA | 400-BGA | 400-BGA | 400-BGA | 400-BGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3E XA | Spartan-3E XA | Spartan-3E XA | Spartan-3E | Spartan-3E | Spartan-3E |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Special Features | Automotive Spartan-3E XA | Automotive Spartan-3E XA | Automotive Spartan-3E XA | Commercial Spartan-3E | Commercial Spartan-3E | Commercial Spartan-3E |
주요 차별점
- Combines automotive XA positioning with 304 user I/O pins (vs XC3S1600E-4FG400I)
- High-density logic and memory integration (vs XA3S250E-4FTG256I)
- Same-family ordering alternatives preserve PCB compatibility (vs XA3S1600E-4FGG400I)
설계 노트
Treat the 400-ball BGA as a multilayer-routing problem. Use the manufacturer’s ball map and recommended layer stack to plan power, ground, signal, and escape routing before placement. Keep high-speed clock and sensitive configuration paths short, avoid splits beneath the device, and preserve uninterrupted reference planes. Validate layer transitions, via-in-pad requirements, and solder-mask assembly rules with the board fabricator.
Implement the power architecture from the exact manufacturer datasheet, including every required supply rail and its sequencing relationship. Place bulk and high-frequency decoupling capacitors close to the associated BGA power balls, and provide low-impedance vias into the internal planes. Review voltage tolerances, startup current, configuration behavior, and power-source impedance rather than assuming the board connector can supply configuration and I/O loads.
Estimate worst-case junction temperature from FPGA power, ambient temperature, package thermal characteristics, PCB copper, and airflow. The 400-ball package can dissipate substantial power across numerous internal power and ground balls, so spreading vias and enlarging exposed copper areas may be necessary. Use the manufacturer thermal model for the final stack-up and enclosure, and confirm the result against the maximum operating temperature of the selected suffix.
Do not substitute the XA automotive part for an XC commercial part, or vice versa, solely because both use a 400-ball package. Confirm the ordering code, qualification profile, temperature range, lead finish, lifecycle status, and configuration compatibility. Also verify that the programmed bitstream and pin constraints are valid for the exact replacement; identical package geometry does not by itself establish regulatory or lifecycle equivalence.
규정 준수 정보
The XA3S1600E-4FG400I is listed as RoHS Non-Compliant and contains lead. It is an automotive-grade Spartan-3E XA FPGA. Confirm the exact AEC-Q100 qualification grade and any applicable regulatory exemptions in the manufacturer documentation.