XC3S50AN-4TQ144I - 50K Spartan-3AN FPGA | Xilinx
Référence : XC3S50AN-4TQ144I ✓ ActifXC3S50AN-4TQ144I Présentation
A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable I/O, and embedded memory. Within the device hierarchy, the XC3S50AN-4TQ144I is a Spartan-3AN FPGA, a member of the Xilinx Spartan-3 family. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture to implement parallel processing, control logic, serial interfaces, protocol handling, or other system-specific functions.
Principal features include 176 logic array blocks, 1,584 configurable logic elements, 55,296 bits of block RAM, and 108 user I/O pins. The -4 designation identifies the device speed grade, while the industrial suffix supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3AN architecture also supports non-volatile configuration and data-storage capabilities, distinguishing it from the related Spartan-3A family.
The 144-pin TQFP package exposes the device's programmable I/O and supply connections on a surface-mount PCB footprint. Its 108 user I/O count provides substantial parallel connectivity for external memories, data converters, communication transceivers, and general control peripherals. Designers should still confirm the exact I/O standard, pin assignment, and configuration requirements against the package-specific pinout before routing a new PCB.
Typical applications include industrial control systems, data-acquisition equipment, embedded communications, instrumentation, video processing, and low-cost FPGA prototyping. The device is especially useful where logic parallelism or field reconfiguration provides more flexibility than a fixed microcontroller or application-specific controller.
A key design consideration is that pin-compatible alternatives can differ in temperature grade, speed grade, embedded flash, and configuration behavior. Validate the complete ordering code, supported I/O standards, configuration memory interface, and power architecture before approving a replacement. This page combines package-aware alternatives, engineering guidance, and application analysis to support that decision.
For this Spartan-3AN FPGA, the main design task is balancing flexible programmable logic against board-level requirements. The 50K-density device offers 1,584 logic elements and 108 user I/O pins, providing enough parallel resources for compact embedded systems without requiring a larger FPGA package. Its 90 nm process and 1.2 V core supply also require careful attention to bypass capacitance, signal integrity, thermal margins, and configuration startup behavior. Engineers should use the manufacturer datasheet and package pin table as the authority for final connectivity, supported voltage standards, and power sequencing.
Alternatives de remplacement direct pour XC3S50AN-4TQ144I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC3S50AN-4TQ144I (même facteur de forme et même empreinte) — différant par Package, Core Supply Voltage, Device Type, FPGA Family, Block RAM.
XC3S50AN-4TQG144I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC3S50AN-4TQ144C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC3S50AN-5TQ144C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC3S50A-4TQ144I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC3S50A-4TQG144I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC3S50AN-4TQ144I Valeurs maximales et caractéristiques électriques
| FPGA Family | Spartan-3AN |
| Device Density | 50K |
| Total RAM | 55,296 bits |
| Logic Elements | 1,584 |
| Logic Array Blocks | 176 |
| User I/O Pins | 108 |
| Fréquence d'horloge maximale | 770 MHz |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -4 |
| Temperature Grade | Industrial |
| Junction Temperature Range | -40°C to 100°C |
| Boîtier | 144-pin TQFP |
| Nombre de broches | 144 pins |
| Type de montage | Surface mount |
| Programmable Logic Type | SRAM-configurable FPGA |
| Configuration Support | In-system flash supported |
Guide de configuration des broches du XC3S50AN-4TQ144I 144-pin tqfp
Configuration des broches du XC3S50AN-4TQ144I (boîtier 144-pin tqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC3S50AN-4TQ144I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC3S50AN-4TQ144I convient pour 6 applications: Industrial Automation Controllers, Data-Acquisition and Instrumentation, Embedded Communications Equipment, Programmable Signal Processing, Video and Image Processing, Low-Cost FPGA Prototyping.
Industrial Automation Controllers
The XC3S50AN-4TQ144I fits industrial automation controllers that require parallel logic, programmable I/O, and operation across an industrial temperature range. Its 1,584 logic elements can implement sequencing, interlocks, counters, and communication framing, while 108 user I/O provide connections for sensors, actuators, status indicators, and field-bus transceivers. The -4 speed grade supports clocked control paths up to the documented 770 MHz device frequency before accounting for routing and timing constraints. Place the FPGA in a temperature-controlled enclosure and verify that the estimated junction temperature remains below the specified 100°C maximum. The 144-pin TQFP also simplifies assembly with standard surface-mount inspection and automated pick-and-place handling.
Recommandé
Data-Acquisition and Instrumentation
For instrumentation and data-acquisition systems, the XC3S50AN-4TQ144I can implement parallel sampling control, digital filtering, trigger logic, and data formatting while its 55,296 RAM bits provide local buffering. The 108 user I/O support external converters, clock sources, capture memory, and communication links without requiring a separate controller for every fixed function. The 90 nm Spartan-3AN architecture is appropriate for compact industrial instruments, and the industrial grade supports operation from -40°C to 100°C junction temperature. Engineers should define acquisition timing in the tool, constrain clocks, and use the manufacturer package pin table to assign every I/O standard before fabrication.
Recommandé
Embedded Communications Equipment
The XC3S50AN-4TQ144I is suitable for compact communications equipment requiring parallel packet processing, protocol conversion, or test-channel multiplexing. Its programmable logic can implement framing, CRC processing, buffering, and state machines, while 55,296 RAM bits support short packet queues or channel storage. The 108 I/O pins permit connection to transceivers, memories, and parallel network interfaces. The -4 performance grade and documented 770 MHz maximum device frequency provide timing headroom for clocked fabric, although achievable interface rates depend on routing, I/O standards, and board-level constraints. Use disciplined clocking, controlled-impedance routing, and grounded supply planes to maintain signal integrity.
Recommandé
Programmable Signal Processing
The XC3S50AN-4TQ144I can implement compact parallel signal-processing functions such as digital filters, correlation, waveform generation, and sensor-fusion pre-processing. Its configurable logic blocks and 55,296 RAM bits are well matched to fixed-word-width DSP pipelines where parallel throughput matters more than very large storage. The 108 user I/O supports converters, memory interfaces, and synchronization logic, while the industrial temperature specification suits factory equipment and robust outdoor installations. Establish pipeline latency, arithmetic width, and clock-domain boundaries in the design, then validate timing with realistic constraints rather than relying only on the device's maximum stated clock frequency.
Recommandé
Video and Image Processing
The XC3S50AN-4TQ144I is suitable for small-scale video timing, pixel transport, test-pattern generation, and image pre-processing systems. Programmable logic can synchronize pixel and line timing, apply basic thresholding or filtering, and buffer short data bursts in the available 55,296 RAM bits. Its 108 user I/O offers substantial parallel connectivity to image sensors, display interfaces, and memory devices. Because this is a 50K-density FPGA rather than a dedicated video processor, the design should focus on parallel control and modest processing workloads. Match the external interface voltage and timing to supported I/O standards, and keep high-speed video traces short and properly terminated.
Recommandé
Low-Cost FPGA Prototyping
The XC3S50AN-4TQ144I provides a practical platform for prototyping parallel digital architectures before selecting a larger or differently packaged FPGA. Its 1,584 logic elements, 55,296 RAM bits, and 108 user I/O allow engineers to validate control logic, interfaces, counters, and state machines on a surface-mount board. The TQFP package is accessible for manual rework and inspection, making it useful when test access is limited. Design the prototype around reusable I/O assignments and define expansion headers for external memories or peripherals. Confirm configuration storage, clock sources, and pin constraints so the prototype remains representative of the intended production implementation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC3S50AN-4TQ144I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC3S50AN-4TQG144I | XC3S50AN-4TQ144C | XC3S50AN-5TQ144C | XC3S50A-4TQ144I | XC3S50A-4TQG144I |
|---|---|---|---|---|---|---|
| Package | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| FPGA Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3A | Spartan-3A |
| Device Density | 50K | 50K | 50K | 50K | 50K | 50K |
| Logic Elements | 1,584 | 1,584 | 1,584 | 1,584 | 1,584 | 1,584 |
| RAM Bits | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits |
| Speed Grade | -4 | -4 | -4 | -5 | -4 | -4 |
| Temperature Grade | Industrial, -40°C to 100°C junction temperature | Industrial | Commercial | Commercial | Industrial | Industrial |
| In-System Flash | Supported | Supported | Supported | Supported | Not established for the Spartan-3A ordering code | Not established for the Spartan-3A ordering code |
Principaux différenciateurs
- Industrial temperature capability distinguishes the target ordering code (vs XC3S50AN-4TQ144C)
- The -4 grade matches the closest Spartan-3AN package-compatible alternatives (vs XC3S50AN-5TQ144C)
- Spartan-3AN configuration retains in-system flash functionality (vs XC3S50A-4TQ144I)
Notes de conception
Separate the FPGA's 1.2 V core supply from I/O and auxiliary supply requirements in the power tree. Place stable decoupling capacitance at the package power pins and keep high-current return paths short. Before routing, confirm which pins are supply, ground, configuration, clock-capable, and ordinary I/O using the package-specific manufacturer pin table. Power sequencing and externally generated configuration voltage must also be checked against the device's configuration requirements rather than inferred from a generic Spartan-3 board.
Preserve a pin-compatible PCB footprint only after comparing the mechanical drawing, terminal numbering, exposed thermal requirements, and package marking of the selected order code. The target is a 144-pin TQFP, but TQ and TQG suffix variants should not be assumed equivalent without checking their ordering definitions. Place decoupling capacitors adjacent to the relevant pins, keep clock inputs away from high-speed data crossings, and route configuration signals away from noisy switching nodes. Use the manufacturer's recommended land pattern rather than a generic TQFP footprint.
Do not treat every XC3S50A or XC3S50AN 144-pin device as an automatic drop-in replacement. The Spartan-3AN designation adds in-system flash behavior that must be matched to the configuration design, while the I and C suffixes identify different temperature grades and the -4 and -5 suffixes identify different speed grades. Validate the bitstream, configuration source, power-up behavior, timing constraints, temperature range, and lifecycle requirements. Cross-reference compatibility alone does not replace engineering change control.
Define clock periods and external interface timing from the actual board requirements rather than adopting the documented 770 MHz device maximum as a universal operating target. That figure represents a device-level capability, not guaranteed system performance for every routed design. Constrain all clocks, check worst-case routing delays, specify input and output timing for external devices, and reserve series termination where signal-integrity analysis requires it. Keep high-speed nets short, provide a continuous reference plane, and avoid switching-regulator nodes beneath sensitive clock routing.
Informations de conformité
The TQ and TQG ordering suffixes may relate to material or lead-finish distinctions, but no explicit compliance conclusion should be made without the corresponding manufacturer ordering and material declaration.