XC6SLX25T-2FGG484C - Spartan-6 LXT FPGA | AMD Xilinx
Référence : XC6SLX25T-2FGG484C ✓ ActifXC6SLX25T-2FGG484C Présentation
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, memory, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, joining CPLDs and mask-programmable logic devices as configurable alternatives to application-specific integrated circuits. Spartan-6 devices combine configurable logic blocks, block RAM, digital clock managers, and programmable I/O in a single surface-mount device.
The XC6SLX25T provides 1,879 configurable logic blocks or CLBs, 24,051 logic cells, and 958,464 RAM bits. Its 250 I/Os support communication interfaces, control signals, data acquisition, and external memory interfaces. The device also includes 48 DSP slices according to the manufacturer datasheet, allowing arithmetic and filtering functions to be implemented without relying entirely on external accelerators.
The -2 designation identifies the device speed grade, while the FGG484 suffix identifies the 484-ball plastic BGA configuration with a 0.80 mm pitch. The commercial operating-temperature range is 0°C to 85°C. This combination targets moderate-complexity embedded systems where designers need programmable logic, moderate memory capacity, numerous I/Os, and deterministic control without the cost of a larger FPGA.
Typical uses include industrial automation controllers, automotive infotainment interfaces, consumer electronics, video and image-processing pipelines, communications infrastructure, and embedded instrumentation. Its balance of 24,051 logic cells and 250 I/Os is especially useful for protocol bridging, sensor aggregation, motor and machine control, and real-time signal conditioning.
Design around the 1.14 V to 1.26 V core supply range and follow AMD's published decoupling, configuration, clocking, and package-layout guidance. The 484-BBGA footprint requires careful ball assignment, via-in-pad or through-via escape routing, adequate ground distribution, and thermal planning for sustained high-utilization operation.
This page combines package, logic-capacity, memory, temperature, and application details with same-footprint alternatives and practical PCB guidance. It also distinguishes the -2, -3, N3, commercial-temperature, and industrial-temperature variants so engineers can identify a suitable replacement without confusing speed-grade or environmental changes with a true functional drop-in.
Alternatives de remplacement direct pour XC6SLX25T-2FGG484C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC6SLX25T-2FGG484C (même facteur de forme et même empreinte) — différant par Device Type, Package, Package Dimensions, Temperature Grade, FPGA Family.
XC6SLX25T-2FGG484I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX25T-N3FGG484C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX25T-N3FGG484I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX25T-3FG484C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC6SLX25T-2FGG484C Valeurs maximales et caractéristiques électriques
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LXT |
| Logic Cells | 24,051 cells |
| Configurable Logic Blocks | 1,879 CLBs |
| Block RAM | 958,464 bits |
| User I/O | 250 I/Os |
| Internal Frequency | 500 MHz |
| Speed Grade | -2 |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Température de fonctionnement | 0°C to 85°C |
| Boîtier | 484-BBGA, 15 mm × 15 mm, 0.80 mm pitch |
| Type de montage | Surface Mount |
| Package Standard | MO-275 |
| Lead-Free Construction | Lead-free package |
| DSP Slices | 48 slices |
| Clock Management | Digital Clock Manager and PLL |
Guide de configuration des broches du XC6SLX25T-2FGG484C mo-275
Configuration des broches du XC6SLX25T-2FGG484C (boîtier mo-275). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC6SLX25T-2FGG484C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC6SLX25T-2FGG484C convient pour 6 applications: Industrial Automation Controller, Automotive Infotainment Interface, Communications Protocol Bridge, Video and Image-Processing Pipeline, Embedded Instrumentation and Data Acquisition, LED Lighting and Display Control.
Industrial Automation Controller
The XC6SLX25T-2FGG484C fits an industrial automation controller that coordinates sensors, actuators, safety interlocks, and communications links. Its 24,051 logic cells and 1,879 CLBs provide substantial parallel control logic, while 250 I/Os reduce the need for external interface expanders. The 958,464 RAM bits can support state machines, diagnostic records, and communication buffers, and the 48 DSP slices can accelerate filtering or motion-related arithmetic. Place the controller in an enclosure whose ambient conditions remain within the 0°C to 85°C commercial range, and validate timing at the voltage and temperature corners specified for the -2 grade.
Recommandé
Automotive Infotainment Interface
The XC6SLX25T-2FGG484C is appropriate for programmable vehicle infotainment interfaces that bridge display, audio, networking, and user-control signals. Its 250 I/Os support multiple peripheral connections, while the LXT architecture provides dedicated DSP resources for audio or video conditioning without using a separate accelerator for every function. The 45 nm Spartan-6 implementation combines 24,051 logic cells with 958,464 RAM bits for protocol conversion and packet buffering. Commercial-temperature operation is appropriate for cabin-mounted products, but placement near a dashboard or amplifier requires ambient and junction-temperature analysis because internal FPGA power can raise the die temperature above the enclosure limit.
Recommandé
Communications Protocol Bridge
The XC6SLX25T-2FGG484C can implement a multi-protocol communications bridge between legacy peripherals and a modern processor or network controller. The 250 available I/Os allow simultaneous UART, SPI, parallel data, control, and status interfaces, while 958,464 RAM bits accommodate packet FIFOs and protocol translation state. Its listed 500 MHz internal frequency under the -2 grade supports deterministic parallel logic and clocked interface processing. For high-speed links, confirm the applicable I/O timing, drive strength, impedance, and clocking requirements in the AMD family datasheet; line-rate operation is not determined by the internal frequency alone.
Recommandé
Video and Image-Processing Pipeline
The XC6SLX25T-2FGG484C is well suited to real-time image acquisition, pixel filtering, color processing, and display-interface bridging. The 48 DSP slices can process multiply-accumulate operations in parallel, while the programmable logic fabric implements pipeline control and data movement. Its 250 I/Os provide connections to sensors, capture devices, memory interfaces, and displays, and 958,464 RAM bits can support line buffers and timing queues. The practical throughput depends on the selected I/O standards, memory interface, clock tree, and implemented pipeline, so use AMD timing estimates for the -2 speed grade rather than deriving performance solely from the 500 MHz internal-frequency figure.
Recommandé
Embedded Instrumentation and Data Acquisition
The XC6SLX25T-2FGG484C can coordinate multiple sensors, digitizers, and calibration paths in an embedded instrumentation system. Its 24,051 logic cells are useful for parallel channel management, trigger sequencing, digital filtering, and status reporting, while 958,464 RAM bits provide acquisition buffers and working storage. The 48 DSP slices offer a practical advantage for numerical filtering and transform-related functions implemented directly in the FPGA. Designers should use the manufacturer pinout files to assign high-speed inputs, establish controlled clock distribution, and separate analog, digital, and high-speed return paths to avoid coupling measurement noise into sensitive circuitry.
Recommandé
LED Lighting and Display Control
The XC6SLX25T-2FGG484C can drive synchronized LED arrays, signage, status displays, and illumination systems by combining parallel timing logic with programmable serial interfaces. The 250 I/Os allow numerous enable, latch, clock, and data connections, and the 48 DSP slices can support brightness shaping, color correction, and motion effects. Its 24,051 logic cells provide enough capacity for multichannel refresh scheduling and fault monitoring without adding a separate microcontroller for every display function. Validate the external driver topology, LED current limits, refresh rate, and connector pinout separately, since the FPGA controls timing and logic but does not determine safe LED drive current by itself.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC6SLX25T-2FGG484C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC6SLX25T-2FGG484I | XC6SLX25T-N3FGG484C | XC6SLX25T-N3FGG484I | XC6SLX25T-3FG484C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 484-BBGA | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same package family |
| FPGA Family | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT |
| Logic Cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells |
| Block RAM | 958,464 bits | 958,464 bits | 958,464 bits | 958,464 bits | 958,464 bits |
| User I/O | 250 I/Os | 250 I/Os | 250 I/Os | 250 I/Os | 250 I/Os |
| Speed Grade | -2 | -2 - same | N3 - different | N3 - different | -3 - different |
| Operating Temperature | 0°C to 85°C | -40°C to 100°C junction temperature | Commercial-temperature N3 variant | -40°C to 100°C junction temperature | Commercial-temperature -3 variant |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
Principaux différenciateurs
- Commercial -2 speed-grade configuration (vs XC6SLX25T-N3FGG484C)
- Commercial-temperature option with full Spartan-6 LXT resource set (vs XC6SLX25T-2FGG484I)
- High I/O availability in a 484-ball surface-mount package (vs XC6SLX25T-2CSG324C)
Notes de conception
Treat the 484-BBGA layout as a high-density routing problem. Follow AMD's package-ball assignment and escape-routing guidance, place decoupling capacitors adjacent to the applicable supply balls, and provide a continuous low-impedance ground reference beneath the device. Verify drill-to-copper clearances, solder-mask-defined pads, via-in-pad suitability, and assembly-process compatibility before releasing the PCB. Incorrect assumptions about the 0.80 mm ball pitch can create opens between adjacent signal escapes.
Estimated: regulator dissipation equals output voltage multiplied by current at each supply rail. For a hypothetical 1.20 V core rail drawing 0.50 A, the estimated core-rail dissipation is 0.60 W before accounting for I/O and configuration power. Use that estimate only for early thermal planning, then replace it with Vivado power analysis and board measurements. Keep the core supply within the specified 1.14 V to 1.26 V range and check sequencing requirements for every auxiliary supply.
Separate clock, high-speed routing, and sensitive analog-adjacent inputs as far as the ball map permits. Match impedance using the actual board stack-up, maintain continuous reference planes, and avoid routing high-speed signals across split power or ground planes. Although the device has 500 MHz internal capability, external interface performance is also controlled by I/O standards, package loss, board topology, and source-synchronous timing constraints in the AMD family documentation.
Do not treat all XC6SLX25T 484-ball devices as equivalent without checking the complete suffix. The speed grade can change timing and power behavior, while the final temperature suffix changes the environmental range. Confirm configuration mode pins, I/O assignments, supported memory interfaces, and ball functions against the package files for the exact replacement. A mechanically similar BGA package is not sufficient evidence of drop-in compatibility.
Informations de conformité
The package is identified as lead-free and conforms to MO-275. Detailed RoHS, REACH, halogen-free, and conflict-minerals declarations require confirmation from the current AMD product documentation.