XC7K325T-3FFG676E - 326K-Cell Kintex-7 FPGA | AMD
Référence : XC7K325T-3FFG676E ✓ ActifXC7K325T-3FFG676E Présentation
A Kintex-7 FPGA belongs to the programmable-log hierarchy: FPGA, programmable logic device, digital semiconductor, and integrated circuit. Unlike fixed-function processors, an FPGA combines configurable logic blocks, block RAM, programmable I/O, DSP resources, clocking, and high-speed serial transceivers. This architecture allows engineers to implement parallel data paths, protocol bridges, signal processing, and control systems in one device.
Key device characteristics include 326,080 logic cells, 16,020 Kb of block RAM, and a listed operating-voltage range of 970 mV to 1.03 V. The device also includes MMCM and PLL resources, along with 250 I/O listed for this package combination. Its 28 nm Kintex-7 implementation supports a strong balance of logic density, throughput, power efficiency, and general-purpose I/O for communications, industrial, test, and embedded-processing applications.
The -3 speed grade is designed for maximum performance within the Kintex-7 family. Configurable logic and DSP resources can process multiple parallel channels, while dedicated block RAM reduces external-memory traffic. High-speed serial capabilities make the device appropriate for PCIe Gen3 and 10 Gigabit Ethernet designs, although the exact transceiver and I/O configuration must be confirmed against the family data sheet and the selected board design.
Typical uses include network-interface and protocol-conversion equipment, industrial automation, high-speed test systems, industrial Ethernet, embedded signal processing, and high-throughput data acquisition. The FCBGA-676 format requires careful PCB layout because power delivery, decoupling, thermal management, and high-speed routing can materially affect system reliability.
Designers should use the AMD Kintex-7 package pinout files when assigning package pins and constraints. Place power and ground connections according to the package data, provide the specified decoupling network near the device, and route high-speed interfaces with controlled impedance. The 676-ball package also demands careful thermal analysis because dense logic and transceiver activity can produce substantial heat during sustained operation.
This product page combines device specifications, package details, sourcing information, same-package alternatives, and practical engineering guidance to support faster component selection, PCB planning, and Kintex-7 implementation.
Alternatives de remplacement direct pour XC7K325T-3FFG676E — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC7K325T-3FFG676E (même facteur de forme et même empreinte) — différant par Speed Grade, Package, Block RAM, Logic Cells, Process Technology.
XC7K325T-2FFG676I
✅ Remplacement direct✓ En stock
$98 / unité
Voir la fiche technique →XC7K325T-2FFG676C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7K325T-1FFG676I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7K325T-1FFG676C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7K325T-L2FFG676E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC7K325T-3FFG676E Valeurs maximales et caractéristiques électriques
| Device Type | Kintex-7 FPGA |
| Logic Cells | 326,080 cells |
| Block RAM | 16,020 Kb |
| User I/O | 250 I/O |
| Total I/O | 400 I/O |
| Speed Grade | -3 |
| Process Technology | 28 nm |
| Core Voltage Range | 970 mV to 1.03 V |
| Clocking Resources | MMCM and PLL |
| Maximum Frequency | 741 MHz |
| Boîtier | FCBGA-676 |
| Ball Count | 676 balls |
| Type de montage | Surface mount |
| Product Family | Kintex-7 |
| Supported High-Speed Interfaces | PCIe Gen3 and 10 Gigabit Ethernet |
| Programming | FPGA configuration |
| RoHS | Compliant |
Guide de configuration des broches du XC7K325T-3FFG676E fcbga-676
Configuration des broches du XC7K325T-3FFG676E (boîtier fcbga-676). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC7K325T-3FFG676E.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC7K325T-3FFG676E convient pour 6 applications: High-Speed Network Interface, Industrial Automation and Control, High-Speed Test and Measurement, Industrial Ethernet and 10 Gigabit Networking, Embedded Signal Processing, Aerospace and Defense Processing.
High-Speed Network Interface
The XC7K325T-3FFG676E fits network-interface and protocol-conversion designs requiring parallel logic, substantial block RAM, and high-speed serial connectivity. Its 326,080 logic cells allow multiple packet-processing paths to operate concurrently, while 16,020 Kb of block RAM can support buffering and traffic management. The -3 speed grade provides additional timing headroom for demanding datapaths. In a network card or gateway, the device can implement link-layer processing, packet classification, buffering, and control functions while AMD transceiver resources handle serial lanes. Because sustained serial traffic can increase board-level power, thermal analysis should include actual lane count, data rate, and utilization rather than relying on device type alone.
Recommandé
Industrial Automation and Control
The XC7K325T-3FFG676E is suitable for industrial automation systems that combine deterministic control logic with communication and signal processing. Its configurable I/O allows multiple machine interfaces to be consolidated, while 326,080 logic cells support parallel control, diagnostics, and motion-control pipelines. The -3 grade provides useful timing margin for complex control fabrics and faster clock domains. In a controller, the FPGA can coordinate sensors, actuators, safety interlocks, and fieldbus traffic while DSP blocks accelerate filtering or feedback calculations. Industrial deployments still require separate protection, isolation, EMC filtering, and environmental qualification. The device should be treated as the digital processing core rather than as a complete safety-rated industrial subsystem.
Recommandé
High-Speed Test and Measurement
The XC7K325T-3FFG676E can serve as the processing core in high-speed test and measurement equipment where parallel acquisition, pattern generation, and real-time analysis must be combined. The 326,080 logic cells support wide datapaths and concurrent channels, while 16,020 Kb of block RAM provides local storage for samples or captured patterns. Its -3 speed grade is useful when timing closure across multiple clock domains would otherwise be restrictive. Engineers can implement digital stimulus generation, acquisition pipelines, trigger logic, and analysis blocks in one programmable device. Interface bandwidth and conversion performance must be designed around the selected I/O standards, and high utilization requires careful power estimation and PCB thermal validation.
Recommandé
Industrial Ethernet and 10 Gigabit Networking
The XC7K325T-3FFG676E fits industrial Ethernet and 10 Gigabit networking platforms that require a combination of serial connectivity, packet handling, and programmable logic. AMD identifies Kintex-7 as supporting mainstream standards including 10 Gigabit Ethernet and PCIe Gen3. With 326,080 logic cells and 16,020 Kb of block RAM, the device can accommodate protocol engines, queues, checksums, and monitoring logic around high-speed serial interfaces. The -3 speed grade is valuable for meeting aggressive timing constraints in wide datapaths. Exact transceiver counts and supported rates vary by package and configuration, so the board design must follow the selected speed grade, package files, and AMD transceiver guidance. Thermal design should reflect continuous high-speed lane activity.
Recommandé
Embedded Signal Processing
The XC7K325T-3FFG676E is appropriate for embedded DSP and digital signal-processing systems requiring programmable parallelism. Its Kintex-7 resources combine logic, DSP blocks, and block RAM, enabling filters, transforms, correlation, modulation, and real-time channel processing to share one package. The -3 grade supplies the highest Kintex-7 performance class, which can improve timing margin for pipeline-based implementations. A practical design can map high-throughput arithmetic stages into DSP resources while using block RAM for coefficients, circular buffers, or channel storage. The actual throughput depends on the selected I/O standard, clocking scheme, memory interfaces, and timing constraints. Engineers should profile the design after implementation and avoid assuming that nominal device frequency alone guarantees real-world channel performance.
Recommandé
Aerospace and Defense Processing
The XC7K325T-3FFG676E can support high-complexity programmable-logic tasks in aerospace, defense, and instrumentation systems after device-specific qualification and environmental review. Its 326,080 logic cells and 16,020 Kb of block RAM are suitable for combining control, telemetry, signal conditioning, and communication processing. The -3 speed grade can improve timing margins in demanding pipelines. However, deployment requires more than selecting a high-performance FPGA: engineers must verify the exact E temperature suffix, operating-temperature limits, radiation and reliability requirements, lifecycle expectations, configuration-security requirements, and supply-chain documentation. The BGA package also demands controlled assembly, inspection, and thermal-analysis procedures appropriate to the system.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC7K325T-3FFG676E — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC7K325T-2FFG676I | XC7K325T-2FFG676C | XC7K325T-1FFG676I | XC7K325T-1FFG676C | XC7K325T-L2FFG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FFG676 | FFG676 - same package | FFG676 - same package | FFG676 - same package | FFG676 - same package | FFG676 - same package |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| Block RAM | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb |
| Speed Grade | -3 | -2 | -2 | -1 | -1 | -2L |
| Temperature Grade | E | I | C | I | C | E |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| User I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O | 250 I/O |
| Clocking Resources | MMCM and PLL | MMCM and PLL | MMCM and PLL | MMCM and PLL | MMCM and PLL | MMCM and PLL |
Principaux différenciateurs
- Highest Kintex-7 speed grade in the listed FFG676 alternatives (vs XC7K325T-2FFG676I)
- Same 676-ball footprint enables focused family-level substitution (vs XC7K325T-1FFG676C)
- E temperature suffix on the selected ordering code (vs XC7K325T-2FFG676I)
- Lower-power family option remains available for thermally constrained designs (vs XC7K325T-L2FFG676E)
Notes de conception
Use the AMD Kintex-7 package pinout files for FFG676 and assign every power, ground, configuration, and user-I/O ball from those files. The FCBGA-676 footprint is too large to reproduce reliably from a generic BGA drawing. Place the required power and ground planes, decoupling capacitors, configuration interface, and clock sources according to the AMD hardware design guidance. Review escape routing from the dense ball array early because late footprint corrections can affect layer count, via structure, and assembly yield.
Estimate power from the implemented design rather than from the FPGA type alone. The -3 grade can maximize logic and transceiver activity, while utilization, I/O standards, clock rates, and temperature strongly affect dissipation. Use the AMD power-estimation tools and package thermal data, then calculate junction temperature with the actual board construction and airflow. Validate the thermal solution under worst-case ambient temperature and sustained high-utilization operation, with particular attention to the 676-ball package's center-to-edge heat-flow path.
Assign high-speed interfaces by device and package capability, then implement the associated I/O standards in the PCB stack-up. Maintain continuous reference planes, use controlled-impedance routing, control skew between related lanes, and add matching structures where required by the selected interface. Keep clocks away from high-speed data where practical and follow AMD transceiver and clocking guidance. Post-layout extraction should be used to confirm margin rather than relying only on schematic-level signal-integrity assumptions.
Do not treat every XC7K325T package suffix as interchangeable. FFG676 and FBG676 use different package pinouts, while the final letter and speed code affect temperature grade, performance, and power characteristics. A lower speed grade may fail an existing -3 timing budget even though the PCB footprint is unchanged. Before substitution, verify the package file, target bitstream device identifier, timing constraints, configuration scheme, diagnostics, temperature range, and power characteristics.
Separate and regulate the FPGA supply rails according to the AMD power-supply design requirements, and place local bulk and high-frequency decoupling close to the relevant power and ground balls. Avoid long shared current paths between neighboring balls and ensure adequate via connectivity through every layer transition. Validate the power-integrity network with the actual stack-up and worst-case switching activity. Sequencing and ramp requirements must also be checked because incorrect rail order can affect startup behavior or damage the device.
Informations de conformité
The listed assembly-page classification identifies the XC7K325T-3FFG676E as BGA676 SMT and RoHS compliant. No verified REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was available.