AMD

XC7Z010-L1CLG225I - Low-Power Zynq-7000 SoC | AMD

Référence : XC7Z010-L1CLG225I ✓ Actif
1.2 V and 3.3 V Vdss 225-CSPBGA, 13 x 13 mm Package 667 MHz Speed
MOQ : 1 |

XC7Z010-L1CLG225I Présentation

The AMD XC7Z010-L1CLG225I is a low-power Zynq-7000 system-on-chip with 28K Artix-7 FPGA logic cells, a dual-core ARM Cortex-A9 MPCore processor operating at 667 MHz, and CoreSight debug support in a 225-CSPBGA package measuring 13 x 13 mm. The integrated programmable logic and application processor allow control, communications, and signal processing to share one device.

A Zynq SoC is an FPGA-based system-on-chip architecture that combines an ARM Cortex-A9 application processing unit with Artix-7 programmable logic. This device therefore belongs to both the embedded microprocessor and FPGA & CPLD product categories, while its high integration reduces the need for separate processors and programmable-logic devices. The L1 ordering code identifies the low-power version of the XC7Z010 device family.

The principal features include 28K logic cells, a dual-core 32-bit ARM Cortex-A9 processor, a 667 MHz maximum operating frequency, and 225-CSPBGA packaging. The device operates from 1.2 V and 3.3 V rails according to its published ordering information. Its combined architecture is useful when an application requires Linux-capable processing, real-time control, programmable interfaces, or dedicated hardware-assisted data paths.

The XC7Z010-L1CLG225I belongs to the XC7Z010 Zynq-7000 family, whose hardware documentation also identifies CLG225 package variants with four external ADC signal pairs. The FPGA fabric can implement parallel interfaces, protocol handling, data acquisition, and custom accelerators, while the application processor manages control software, networking, and higher-level tasks. This division of labor allows latency-sensitive operations to remain in programmable logic.

Typical uses include industrial control gateways, embedded Linux systems, data-acquisition equipment, machine vision, communication concentrators, and sensor-processing platforms. In these systems, the processor can run the operating system and supervisory logic while the programmable fabric executes deterministic acquisition, filtering, packet processing, or peripheral bridging. The same integration can reduce board area and simplify the interface between software and hardware logic.

Designers should evaluate power sequencing, decoupling, clocking, DDR memory connectivity, and the BGA escape-routing strategy before layout. Because the processor and programmable logic share power, thermal, and package constraints, the implementation should follow the AMD Zynq-7000 packaging, pinout, and PCB design guidance. A board-level design also needs a reproducible boot or programming path and must preserve the device-specific configuration required by the selected Linux image or bitstream.

This product page combines the manufacturer device description with application-oriented engineering guidance, same-family drop-in options, and a practical comparison of speed-grade and temperature-grade ordering codes. It is intended to accelerate device selection while preserving the migration checks required for an industrial-temperature Zynq-7000 design.

Alternatives de remplacement direct pour XC7Z010-L1CLG225I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec XC7Z010-L1CLG225I (même facteur de forme et même empreinte) — différant par Package, External ADC Signal Pairs, Mounting Type, Device Type, FPGA Logic Cells.

AMD
Package: 225-CSPBGA
Device Type: Zynq-7000 Artix-7 FPGA SoC
FPGA Logic Cells: 28K cells
Comparer avec XC7Z010-L1CLG225I →
AMD
Package: 225-CSPBGA (13x13 mm)
External ADC Signal Pairs: 4 (differential inputs)
Mounting Type: Surface Mount
Comparer avec XC7Z010-L1CLG225I →

XC7Z010-1CLG225I

✅ Remplacement direct
AMD
📦 225-CSPBGA (13 x 13 mm)
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 28K · 225-CSPBGA (13x13 mm) · -40°C to +100°C (Industrial) · 1.0V · 0.95V · 1.05V

Contactez-nous pour le prix

Voir la fiche technique →

XC7Z010-2CLG225I

✅ Remplacement direct
📦 225-CSPBGA (13 x 13 mm)
Spécifications compatibles

Contactez-nous pour le prix

XC7Z010-1CLG225C

✅ Remplacement direct
AMD
📦 225-CSPBGA (13 x 13 mm)
Zynq-7000 Artix-7 FPGA SoC · 2 Arm Cortex-A9 cores · 667 MHz · 28K cells · CoreSight · 225-CSPBGA · 13 x 13 mm · 225 balls

Contactez-nous pour le prix

Voir la fiche technique →

XC7Z010-2CLG225C

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 225-CSPBGA (13 x 13 mm)
Commercial-temperature suffix and higher 2 speed grade at 766 MHz versus 667 MHz

📋 Alternative de référence (hors catalogue)

XC7Z010-L1CLG225C

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 225-CSPBGA (13 x 13 mm)
Commercial-temperature suffix rather than the target industrial-temperature suffix

📋 Alternative de référence (hors catalogue)

XC7Z010-L1CLG225I Valeurs maximales et caractéristiques électriques

Device Type Zynq-7000 system-on-chip with FPGA logic
FPGA Family Artix-7
Logic Cells 28K cells
Application Processor Dual-core ARM Cortex-A9 MPCore
Processor Architecture 32-bit RISC
Maximum Processor Frequency 667 MHz
Debug Support CoreSight
Tension d'alimentation 1.2 V and 3.3 V
Boîtier 225-CSPBGA, 13 x 13 mm
Package Pin Count 225 pins
External ADC Signal Pairs 4 differential pairs
Power Profile Low-power ordering option
Temperature Grade Industrial
Type de montage Surface-mount BGA

Guide de configuration des broches du XC7Z010-L1CLG225I 225 pins

Configuration des broches du XC7Z010-L1CLG225I (boîtier 225 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 225 pins pour le XC7Z010-L1CLG225I

Aucune donnée de brochage détaillée disponible pour XC7Z010-L1CLG225I.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XC7Z010-L1CLG225I convient pour 6 applications: Industrial Control Gateway, Embedded Linux Edge System, Machine Vision Processing, Data Acquisition Controller, Communication Concentrator, Sensor Processing Platform.

🏭

Industrial Control Gateway

The XC7Z010-L1CLG225I fits industrial gateways that combine protocol management with deterministic I/O processing. Its dual-core 667 MHz ARM Cortex-A9 MPCore processor can run the supervisory operating system, networking stack, and configuration logic, while the 28K Artix-7 fabric can handle protocol conversion, timers, and parallel interface control. The 225-CSPBGA package permits compact integration of the control and communications functions. In a typical design, the processor communicates with external sensors through the programmable fabric and isolates latency-critical transactions from non-real-time software tasks. The low-power ordering option is relevant to continuously energized cabinets, although the final power budget must be validated against processor activity, enabled fabric resources, memory access, and the selected 1.2 V and 3.3 V regulators.

🖥️

Embedded Linux Edge System

The XC7Z010-L1CLG225I supports compact embedded Linux edge systems where a conventional processor alone would require additional programmable logic. The 667 MHz dual-core ARM Cortex-A9 MPCore subsystem executes the operating system, network services, and application workloads, while the 28K FPGA fabric can provide custom boot or peripheral logic without occupying processor pins. In this architecture, the programmable logic can accelerate packet filtering, data formatting, or sensor fusion and exchange data with the processor through a memory-mapped interface. A production board must provide a supported DDR memory topology, boot storage, stable clocking, and correct power sequencing. The integrated architecture can reduce board area compared with a separate processor and FPGA, but software drivers and hardware bitstreams must be coordinated to avoid resource conflicts.

📺

Machine Vision Processing

The XC7Z010-L1CLG225I is appropriate for machine-vision controllers that divide pixel transport and preprocessing between programmable logic and software. The 28K Artix-7 fabric can implement camera-data capture, line and pixel pipelines, thresholding, color classification, or frame-buffer control, while the 667 MHz dual-core ARM Cortex-A9 processor runs recognition software and communicates with the host. Placing deterministic acquisition functions in the FPGA reduces processor interrupt and transfer overhead. The device's four external ADC signal pairs, as identified for the 7z010 CLG225 family, can support auxiliary analog monitoring where the system architecture requires them. Thermal performance and video bandwidth should be evaluated with representative sensor resolutions, frame rates, memory configurations, and continuous image-processing workloads.

📡

Data Acquisition Controller

The XC7Z010-L1CLG225I can serve as the control core of a synchronized data-acquisition system. Its ARM Cortex-A9 processor handles configuration, calibration, timestamps, storage management, and communication, while the 28K FPGA fabric executes sampling control, digital filtering, trigger logic, and high-rate buffering. The CLG225 package includes four external ADC signal pairs according to AMD's Zynq-7000 CLG225 documentation, allowing auxiliary measurements to be integrated with the digital acquisition path. Separating acquisition control into the fabric makes timing more deterministic than relying only on software sampling. The design must still account for analog bandwidth, memory bandwidth, clock jitter, input loading, and thermal conditions at the operating temperature. A bootable software image and configuration mechanism should be included so that both processor firmware and FPGA bitstream are reproduced consistently in production.

🌐

Communication Concentrator

The XC7Z010-L1CLG225I is suitable for communication concentrators that need flexible protocol termination alongside a hosted processor. The dual-core 667 MHz ARM Cortex-A9 MPCore processor can manage routing tables, management software, and network services, while the programmable fabric handles low-latency packet framing, framing checks, buffering, or custom serial interfaces. This division allows frequently used traffic to be handled in dedicated hardware while the processor concentrates on control-plane tasks. The 225-CSPBGA package helps reduce board area in distributed telemetry and communications equipment. For deployment, validate worst-case traffic handling, DDR timing, external PHY behavior, clocking, and power integrity. The low-power ordering option is useful in remotely powered installations, but transmit activity and memory-intensive transfers must be included in the final energy and thermal assessment.

🧩

Sensor Processing Platform

The XC7Z010-L1CLG225I can combine sensor conditioning, acquisition, and higher-level processing in one programmable platform. The 28K Artix-7 fabric can implement sensor timing, filtering, threshold logic, and sensor-specific interfaces, while the 667 MHz dual-core ARM Cortex-A9 processor runs diagnostics, local analytics, and configuration management. Four external ADC signal pairs documented for the 7z010 CLG225 devices provide analog monitoring functions alongside the digital sensor path. This architecture is applicable to condition monitoring, environmental sensing, and industrial measurement nodes where deterministic sampling and flexible post-processing are both important. Because the target ordering code is industrial-temperature, board components and enclosure thermal design must preserve the required operating margin. Validation should cover sampling accuracy, sensor drive levels, clock accuracy, software latency, and processor-plus-fabric power at worst-case activity.

What is the XC7Z010-L1CLG225I?
The XC7Z010-L1CLG225I is an AMD Zynq-7000 system-on-chip combining a dual-core 667 MHz ARM Cortex-A9 MPCore processor with 28K Artix-7 FPGA logic cells. According to the AMD Zynq-7000 data sheet, the device is packaged in a 225-CSPBGA measuring 13 x 13 mm. It is intended for embedded systems that need both software processing and programmable hardware acceleration in one package.
Where can I download the XC7Z010-L1CLG225I datasheet PDF?
The XC7Z010-L1CLG225I datasheet is available from the AMD document center at the official Zynq-7000 data-sheet URL on this page. The document covers DC and AC switching characteristics for the XC7Z010 and related Zynq-7000 devices. Use the AMD package pinout resources and UG865 when assigning the 225-CSPBGA connections and board-level escape routing.
Where can I find the XC7Z010-L1CLG225I pinout?
The XC7Z010-L1CLG225I pinout is documented in AMD's Zynq-7000 packaging and pinout resources, with package files distributed through the official package-pinout page. The physical package is a 225-CSPBGA. Consult the selected CLG225 package file and UG865 when creating the symbol, ball map, and PCB land pattern because BGA power, ground, and configuration balls require exact assignment.
What are the key specifications of XC7Z010-L1CLG225I?
The XC7Z010-L1CLG225I provides 28K logic cells, a dual-core ARM Cortex-A9 MPCore processor, a 667 MHz maximum frequency, and CoreSight debugging in a 225-CSPBGA package. According to the AMD Zynq-7000 documentation, the device uses 1.2 V and 3.3 V supplies and belongs to the low-power ordering family. These figures define it as a compact, integrated FPGA-based SoC.
What can replace the XC7Z010-L1CLG225I?
The closest same-family options are XC7Z010-1CLG225I, XC7Z010-2CLG225I, and the commercial-temperature CLG225 variants, subject to speed, temperature, and power-profile requirements. AMD documents the XC7Z010 family in the Zynq-7000 data sheet. No cross-manufacturer drop-in equivalent is established, and CLG400 packages cannot replace a CLG225 device without a PCB redesign.
Is XC7Z010-L1CLG225I the same as XC7Z010-1CLG225I?
No. The XC7Z010-L1CLG225I and XC7Z010-1CLG225I differ in ordering code, power profile, and qualification context even though both use the 225-CSPBGA package and the XC7Z010 device family. AMD discusses direct low-power substitution separately from the standard-speed ordering option. Confirm power behavior, temperature requirements, and the exact approved ordering code before replacing one with the other.
When should I choose XC7Z010-L1CLG225I over XC7Z010-1CLG225I?
Choose the XC7Z010-L1CLG225I when the design prioritizes the low-power ordering option and otherwise fits the XC7Z010 CLG225 electrical, pin, software, and temperature constraints. The standard XC7Z010-1CLG225I may be preferable when its specified operating profile matches the system better. Review the AMD ordering guide and conduct board-level power and thermal validation before changing an approved device.
Is XC7Z010-L1CLG225I suitable for industrial control systems?
The XC7Z010-L1CLG225I is suitable for many industrial-control architectures because it provides an industrial-temperature ordering option, 28K FPGA logic cells, and a dual-core 667 MHz ARM Cortex-A9 processor. According to the AMD Zynq-7000 data sheet, the device is available in a 225-CSPBGA package. Confirm the complete electrical limits, system temperature range, and lifecycle status for the production configuration.
Where can I buy XC7Z010-L1CLG225I and what is its lead time?
Use the Request a Quote form on this page to request XC7Z010-L1CLG225I pricing, current inventory, minimum order quantity, and production lead time. The form allows purchasing teams to specify the required quantity, packaging, inspection level, and shipment destination. The device is a standard catalog component with an official AMD data sheet, but current commercial terms should be confirmed through the quotation process.
Is XC7Z010-L1CLG225I in stock?
Current XC7Z010-L1CLG225I availability should be checked through the Request a Quote form on this page. The quote response can confirm quantity available, allocation, and expected dispatch timing for the exact MPN and package. Because inventory can change independently of catalog lifecycle status, engineers should not treat a general listing as a stock guarantee without a quotation.
What is the price of XC7Z010-L1CLG225I?
The current XC7Z010-L1CLG225I quotation is generated through the Request a Quote form on this page. Submit the required unit count, package preference, inspection level, and delivery destination to receive a current commercial response. For a new production program, this also allows sourcing to confirm allocation and lead time for the exact 225-CSPBGA ordering code.
What is the difference between XC7Z010-L1CLG225I and XC7Z010-2CLG225I?
The XC7Z010-L1CLG225I is the low-power ordering option, while the XC7Z010-2CLG225I uses the higher 2 speed grade associated with a 766 MHz maximum frequency in published comparison material. Both occupy the 225-CSPBGA footprint and use the XC7Z010 architecture. Their power, timing, and operating limits must be reviewed before treating the higher-speed part as interchangeable.
Can XC7Z010-1CLG225I replace XC7Z010-L1CLG225I?
An XC7Z010-1CLG225I can be considered for a board-level substitution review because both parts use the 225-CSPBGA package, but it is not an automatic drop-in change. The ordering codes indicate different power-profile options, and the system must satisfy the replacement part's electrical, timing, temperature, and qualification requirements. AMD's support guidance should be consulted before production substitution.
What is the best AMD equivalent for XC7Z010-L1CLG225I?
The most relevant AMD alternatives are the XC7Z010-1CLG225I, XC7Z010-2CLG225I, and corresponding CLG225 speed- and temperature-grade variants because they remain within the same device and package family. No cross-brand equivalent is documented as a true drop-in replacement. For an XC7Z020 substitution, verify the FPGA resources, package balls, memory interfaces, power rails, and pinout because device interchangeability is not assumed.
How is the XC7Z010-L1CLG225I used in embedded Linux designs?
In an embedded Linux design, the dual-core ARM Cortex-A9 processor runs the operating system and applications, while the 28K Artix-7 fabric can implement dedicated peripherals, accelerators, or deterministic logic. The processor operates at up to 667 MHz according to the AMD product description. The hardware platform also requires a valid boot medium, DDR memory implementation, clocking, reset sequencing, and a bitstream appropriate to the chosen software image.
Does XC7Z010-L1CLG225I require a heatsink?
Thermal requirements for the XC7Z010-L1CLG225I depend on operating mode, utilization, ambient temperature, board construction, and exposed-pad implementation, so a universal heatsink requirement cannot be stated. AMD's package and PCB design guidance should be used to evaluate power delivery and junction temperature. Validate the assembled board at maximum processor and FPGA activity rather than relying on processor or logic-cell utilization alone.

Données de référence d'ingénierie pour XC7Z010-L1CLG225I — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the XC7Z010-L1CLG225I for compact embedded systems that need the XC7Z010's 28K Artix-7 logic, dual-core 667 MHz ARM Cortex-A9 processor, and 225-CSPBGA package while prioritizing the low-power ordering option and industrial-temperature grade. Select XC7Z010-1CLG225I when the standard power profile is preferable and the 667 MHz performance target is sufficient. Consider XC7Z010-2CLG225I when its 766 MHz maximum frequency is justified, after checking power, timing, and thermal effects. Commercial-temperature CLG225 variants are appropriate only when their environmental limits fit the product. XC7Z020 or CLG400 devices are not drop-in choices because their resources, packages, or pinouts differ. In every case, confirm power sequencing, memory compatibility, software support, boot configuration, and the complete production ordering code.

Comparaison avec les alternatives

Paramètre Ce produit XC7Z010-1CLG225I XC7Z010-2CLG225I XC7Z010-1CLG225C XC7Z010-2CLG225C XC7Z010-L1CLG225C
Brand AMD AMD AMD AMD AMD AMD
Package 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm) 225-CSPBGA (13 x 13 mm)
Logic Cells 28K cells 28K cells 28K cells 28K cells 28K cells 28K cells
Application Processor Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore Dual-core ARM Cortex-A9 MPCore
Maximum Processor Frequency 667 MHz 667 MHz 766 MHz 667 MHz 766 MHz 667 MHz
Power Ordering Option L1 low-power Standard ordering option Standard ordering option Standard ordering option Standard ordering option L1 low-power
Temperature Grade Industrial Industrial Industrial Commercial Commercial Commercial
Supply Voltage 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V 1.2 V and 3.3 V
External ADC Signal Pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs 4 differential pairs

Principaux différenciateurs

  • Low-power ordering option within the XC7Z010 family (vs XC7Z010-1CLG225I)
  • Industrial-temperature package option (vs XC7Z010-1CLG225C)
  • Higher-frequency same-package alternative (vs XC7Z010-2CLG225I)

Notes de conception

Use the AMD Zynq-7000 power-sequencing and decoupling guidance to design the 1.2 V and 3.3 V rails. Place the recommended bulk and high-frequency decoupling capacitors at their designated package balls, keep the return path continuous, and control switching-regulator layout so the processor and FPGA rails remain within their specified limits. Validate startup, shutdown, current transients, and rail sequencing across temperature before production release.

Treat the 225-CSPBGA as a demanding escape-routing problem. Follow the official CLG225 package files and UG865 for every ball assignment, including power, ground, configuration, and dedicated pins. Plan via and through-via structures against the required ball pitch, preserve antipads, and review return paths for high-speed memory and serial interfaces. A mechanically compatible BGA outline does not guarantee that an arbitrary PCB stack-up will route or signal correctly.

Estimate junction temperature from the actual processor and FPGA workload, package power loss, board copper, airflow, and the PCB thermal design rather than using logic-cell count alone. Fabric utilization, DDR traffic, and processor utilization can change power substantially. Test the populated assembly at the highest expected ambient temperature, include accessory and interface power when assessing system thermal margins, and verify that the board design preserves the required exposed-pad heat-transfer path.

Do not treat XC7Z010 CLG400 variants as drop-in alternatives for CLG225 boards; their package dimensions, ball counts, and routing requirements differ. Likewise, an ordering-code change from L1 to a standard 1 or 2 speed grade can alter the power profile, maximum frequency, and qualification constraints. Record the approved full MPN in the schematic, bill of materials, bitstream configuration, and production test procedure so an equivalent-looking order code is not substituted inadvertently.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The industrial-temperature ordering suffix does not by itself establish AEC-Q100 qualification. Compliance declarations must be confirmed for the exact device and current manufacturer documentation.

Recherches associées

xc7z010 datasheet xc7z010 1clg225c xc7z010 1clg225i xc7z010 2clg225i xc7z010 1clg400i xc7z010 1clg400c datasheet XC7Z010-L1CLG225I datasheet XC7Z010-L1CLG225I pinout XC7Z010-L1CLG225I replacement XC7Z010-L1CLG225I equivalent XC7Z010-L1CLG225I footprint XC7Z010-L1CLG225I price AMD XC7Z010-L1CLG225I XC7Z010 225-CSPBGA pinout

Composants & termes associés

AMD Xilinx XC7Z010-L1CLG225I XC7Z010-1CLG225I XC7Z010-2CLG225I XC7Z010-1CLG225C Zynq-7000 Artix-7 FPGA ARM Cortex-A9 MPCore CoreSight system-on-chip SoC FPGA CPLD embedded processor programmable logic 225-CSPBGA BGA surface-mount package 28K logic cells 667 MHz external ADC signal pairs embedded Linux industrial control
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ