XC7Z010-L1CLG225I - Low-Power Zynq-7000 SoC | AMD
부품 번호: XC7Z010-L1CLG225I ✓ 활성XC7Z010-L1CLG225I 개요
A Zynq SoC is an FPGA-based system-on-chip architecture that combines an ARM Cortex-A9 application processing unit with Artix-7 programmable logic. This device therefore belongs to both the embedded microprocessor and FPGA & CPLD product categories, while its high integration reduces the need for separate processors and programmable-logic devices. The L1 ordering code identifies the low-power version of the XC7Z010 device family.
The principal features include 28K logic cells, a dual-core 32-bit ARM Cortex-A9 processor, a 667 MHz maximum operating frequency, and 225-CSPBGA packaging. The device operates from 1.2 V and 3.3 V rails according to its published ordering information. Its combined architecture is useful when an application requires Linux-capable processing, real-time control, programmable interfaces, or dedicated hardware-assisted data paths.
The XC7Z010-L1CLG225I belongs to the XC7Z010 Zynq-7000 family, whose hardware documentation also identifies CLG225 package variants with four external ADC signal pairs. The FPGA fabric can implement parallel interfaces, protocol handling, data acquisition, and custom accelerators, while the application processor manages control software, networking, and higher-level tasks. This division of labor allows latency-sensitive operations to remain in programmable logic.
Typical uses include industrial control gateways, embedded Linux systems, data-acquisition equipment, machine vision, communication concentrators, and sensor-processing platforms. In these systems, the processor can run the operating system and supervisory logic while the programmable fabric executes deterministic acquisition, filtering, packet processing, or peripheral bridging. The same integration can reduce board area and simplify the interface between software and hardware logic.
Designers should evaluate power sequencing, decoupling, clocking, DDR memory connectivity, and the BGA escape-routing strategy before layout. Because the processor and programmable logic share power, thermal, and package constraints, the implementation should follow the AMD Zynq-7000 packaging, pinout, and PCB design guidance. A board-level design also needs a reproducible boot or programming path and must preserve the device-specific configuration required by the selected Linux image or bitstream.
This product page combines the manufacturer device description with application-oriented engineering guidance, same-family drop-in options, and a practical comparison of speed-grade and temperature-grade ordering codes. It is intended to accelerate device selection while preserving the migration checks required for an industrial-temperature Zynq-7000 design.
드롭인 대체품: XC7Z010-L1CLG225I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z010-L1CLG225I (동일 폼 팩터 및 풋프린트) — 차이점: Package, External ADC Signal Pairs, Mounting Type, Device Type, FPGA Logic Cells.
XC7Z010-1CLG225I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z010-1CLG225C
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z010-2CLG225C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z010-L1CLG225C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z010-L1CLG225I 최대 정격 & 전기적 특성
| Device Type | Zynq-7000 system-on-chip with FPGA logic |
| FPGA Family | Artix-7 |
| Logic Cells | 28K cells |
| Application Processor | Dual-core ARM Cortex-A9 MPCore |
| Processor Architecture | 32-bit RISC |
| Maximum Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| 공급 전압 | 1.2 V and 3.3 V |
| 패키지 | 225-CSPBGA, 13 x 13 mm |
| Package Pin Count | 225 pins |
| External ADC Signal Pairs | 4 differential pairs |
| Power Profile | Low-power ordering option |
| Temperature Grade | Industrial |
| 실장 유형 | Surface-mount BGA |
XC7Z010-L1CLG225I 225 pins 핀 구성 가이드
XC7Z010-L1CLG225I(225 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z010-L1CLG225I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z010-L1CLG225I 적합 용도: 6 애플리케이션s: Industrial Control Gateway, Embedded Linux Edge System, Machine Vision Processing, Data Acquisition Controller, Communication Concentrator, Sensor Processing Platform.
Industrial Control Gateway
The XC7Z010-L1CLG225I fits industrial gateways that combine protocol management with deterministic I/O processing. Its dual-core 667 MHz ARM Cortex-A9 MPCore processor can run the supervisory operating system, networking stack, and configuration logic, while the 28K Artix-7 fabric can handle protocol conversion, timers, and parallel interface control. The 225-CSPBGA package permits compact integration of the control and communications functions. In a typical design, the processor communicates with external sensors through the programmable fabric and isolates latency-critical transactions from non-real-time software tasks. The low-power ordering option is relevant to continuously energized cabinets, although the final power budget must be validated against processor activity, enabled fabric resources, memory access, and the selected 1.2 V and 3.3 V regulators.
추천
Embedded Linux Edge System
The XC7Z010-L1CLG225I supports compact embedded Linux edge systems where a conventional processor alone would require additional programmable logic. The 667 MHz dual-core ARM Cortex-A9 MPCore subsystem executes the operating system, network services, and application workloads, while the 28K FPGA fabric can provide custom boot or peripheral logic without occupying processor pins. In this architecture, the programmable logic can accelerate packet filtering, data formatting, or sensor fusion and exchange data with the processor through a memory-mapped interface. A production board must provide a supported DDR memory topology, boot storage, stable clocking, and correct power sequencing. The integrated architecture can reduce board area compared with a separate processor and FPGA, but software drivers and hardware bitstreams must be coordinated to avoid resource conflicts.
추천
Machine Vision Processing
The XC7Z010-L1CLG225I is appropriate for machine-vision controllers that divide pixel transport and preprocessing between programmable logic and software. The 28K Artix-7 fabric can implement camera-data capture, line and pixel pipelines, thresholding, color classification, or frame-buffer control, while the 667 MHz dual-core ARM Cortex-A9 processor runs recognition software and communicates with the host. Placing deterministic acquisition functions in the FPGA reduces processor interrupt and transfer overhead. The device's four external ADC signal pairs, as identified for the 7z010 CLG225 family, can support auxiliary analog monitoring where the system architecture requires them. Thermal performance and video bandwidth should be evaluated with representative sensor resolutions, frame rates, memory configurations, and continuous image-processing workloads.
추천
Data Acquisition Controller
The XC7Z010-L1CLG225I can serve as the control core of a synchronized data-acquisition system. Its ARM Cortex-A9 processor handles configuration, calibration, timestamps, storage management, and communication, while the 28K FPGA fabric executes sampling control, digital filtering, trigger logic, and high-rate buffering. The CLG225 package includes four external ADC signal pairs according to AMD's Zynq-7000 CLG225 documentation, allowing auxiliary measurements to be integrated with the digital acquisition path. Separating acquisition control into the fabric makes timing more deterministic than relying only on software sampling. The design must still account for analog bandwidth, memory bandwidth, clock jitter, input loading, and thermal conditions at the operating temperature. A bootable software image and configuration mechanism should be included so that both processor firmware and FPGA bitstream are reproduced consistently in production.
추천
Communication Concentrator
The XC7Z010-L1CLG225I is suitable for communication concentrators that need flexible protocol termination alongside a hosted processor. The dual-core 667 MHz ARM Cortex-A9 MPCore processor can manage routing tables, management software, and network services, while the programmable fabric handles low-latency packet framing, framing checks, buffering, or custom serial interfaces. This division allows frequently used traffic to be handled in dedicated hardware while the processor concentrates on control-plane tasks. The 225-CSPBGA package helps reduce board area in distributed telemetry and communications equipment. For deployment, validate worst-case traffic handling, DDR timing, external PHY behavior, clocking, and power integrity. The low-power ordering option is useful in remotely powered installations, but transmit activity and memory-intensive transfers must be included in the final energy and thermal assessment.
추천
Sensor Processing Platform
The XC7Z010-L1CLG225I can combine sensor conditioning, acquisition, and higher-level processing in one programmable platform. The 28K Artix-7 fabric can implement sensor timing, filtering, threshold logic, and sensor-specific interfaces, while the 667 MHz dual-core ARM Cortex-A9 processor runs diagnostics, local analytics, and configuration management. Four external ADC signal pairs documented for the 7z010 CLG225 devices provide analog monitoring functions alongside the digital sensor path. This architecture is applicable to condition monitoring, environmental sensing, and industrial measurement nodes where deterministic sampling and flexible post-processing are both important. Because the target ordering code is industrial-temperature, board components and enclosure thermal design must preserve the required operating margin. Validation should cover sampling accuracy, sensor drive levels, clock accuracy, software latency, and processor-plus-fabric power at worst-case activity.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7Z010-L1CLG225I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z010-1CLG225I | XC7Z010-2CLG225I | XC7Z010-1CLG225C | XC7Z010-2CLG225C | XC7Z010-L1CLG225C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) |
| Logic Cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells |
| Application Processor | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz | 667 MHz | 766 MHz | 667 MHz | 766 MHz | 667 MHz |
| Power Ordering Option | L1 low-power | Standard ordering option | Standard ordering option | Standard ordering option | Standard ordering option | L1 low-power |
| Temperature Grade | Industrial | Industrial | Industrial | Commercial | Commercial | Commercial |
| Supply Voltage | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V |
| External ADC Signal Pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs |
주요 차별점
- Low-power ordering option within the XC7Z010 family (vs XC7Z010-1CLG225I)
- Industrial-temperature package option (vs XC7Z010-1CLG225C)
- Higher-frequency same-package alternative (vs XC7Z010-2CLG225I)
설계 노트
Use the AMD Zynq-7000 power-sequencing and decoupling guidance to design the 1.2 V and 3.3 V rails. Place the recommended bulk and high-frequency decoupling capacitors at their designated package balls, keep the return path continuous, and control switching-regulator layout so the processor and FPGA rails remain within their specified limits. Validate startup, shutdown, current transients, and rail sequencing across temperature before production release.
Treat the 225-CSPBGA as a demanding escape-routing problem. Follow the official CLG225 package files and UG865 for every ball assignment, including power, ground, configuration, and dedicated pins. Plan via and through-via structures against the required ball pitch, preserve antipads, and review return paths for high-speed memory and serial interfaces. A mechanically compatible BGA outline does not guarantee that an arbitrary PCB stack-up will route or signal correctly.
Estimate junction temperature from the actual processor and FPGA workload, package power loss, board copper, airflow, and the PCB thermal design rather than using logic-cell count alone. Fabric utilization, DDR traffic, and processor utilization can change power substantially. Test the populated assembly at the highest expected ambient temperature, include accessory and interface power when assessing system thermal margins, and verify that the board design preserves the required exposed-pad heat-transfer path.
Do not treat XC7Z010 CLG400 variants as drop-in alternatives for CLG225 boards; their package dimensions, ball counts, and routing requirements differ. Likewise, an ordering-code change from L1 to a standard 1 or 2 speed grade can alter the power profile, maximum frequency, and qualification constraints. Record the approved full MPN in the schematic, bill of materials, bitstream configuration, and production test procedure so an equivalent-looking order code is not substituted inadvertently.
규정 준수 정보
The industrial-temperature ordering suffix does not by itself establish AEC-Q100 qualification. Compliance declarations must be confirmed for the exact device and current manufacturer documentation.