XC7Z010-L1CLG225I - Low-Power Zynq-7000 SoC | AMD
MPN: XC7Z010-L1CLG225I ✓ NakahandaXC7Z010-L1CLG225I Ulas
A Zynq SoC is an FPGA-based system-on-chip architecture that combines an ARM Cortex-A9 application processing unit with Artix-7 programmable logic. This device therefore belongs to both the embedded microprocessor and FPGA & CPLD product categories, while its high integration reduces the need for separate processors and programmable-logic devices. The L1 ordering code identifies the low-power version of the XC7Z010 device family.
The principal features include 28K logic cells, a dual-core 32-bit ARM Cortex-A9 processor, a 667 MHz maximum operating frequency, and 225-CSPBGA packaging. The device operates from 1.2 V and 3.3 V rails according to its published ordering information. Its combined architecture is useful when an application requires Linux-capable processing, real-time control, programmable interfaces, or dedicated hardware-assisted data paths.
The XC7Z010-L1CLG225I belongs to the XC7Z010 Zynq-7000 family, whose hardware documentation also identifies CLG225 package variants with four external ADC signal pairs. The FPGA fabric can implement parallel interfaces, protocol handling, data acquisition, and custom accelerators, while the application processor manages control software, networking, and higher-level tasks. This division of labor allows latency-sensitive operations to remain in programmable logic.
Typical uses include industrial control gateways, embedded Linux systems, data-acquisition equipment, machine vision, communication concentrators, and sensor-processing platforms. In these systems, the processor can run the operating system and supervisory logic while the programmable fabric executes deterministic acquisition, filtering, packet processing, or peripheral bridging. The same integration can reduce board area and simplify the interface between software and hardware logic.
Designers should evaluate power sequencing, decoupling, clocking, DDR memory connectivity, and the BGA escape-routing strategy before layout. Because the processor and programmable logic share power, thermal, and package constraints, the implementation should follow the AMD Zynq-7000 packaging, pinout, and PCB design guidance. A board-level design also needs a reproducible boot or programming path and must preserve the device-specific configuration required by the selected Linux image or bitstream.
This product page combines the manufacturer device description with application-oriented engineering guidance, same-family drop-in options, and a practical comparison of speed-grade and temperature-grade ordering codes. It is intended to accelerate device selection while preserving the migration checks required for an industrial-temperature Zynq-7000 design.
Mga alternatibo na pwedeng ilagay na XC7Z010-L1CLG225I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z010-L1CLG225I (parehas na form factor at footprint) — pagkakaiba sa Package, External ADC Signal Pairs, Mounting Type, Device Type, FPGA Logic Cells.
XC7Z010-1CLG225I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z010-2CLG225I
✅ Drop-InMagkontak para sa presyo
XC7Z010-1CLG225C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z010-2CLG225C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z010-L1CLG225C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z010-L1CLG225I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000 system-on-chip with FPGA logic |
| FPGA Family | Artix-7 |
| Logic Cells | 28K cells |
| Application Processor | Dual-core ARM Cortex-A9 MPCore |
| Processor Architecture | 32-bit RISC |
| Maximum Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| Volte ng Pagbibigay | 1.2 V and 3.3 V |
| Packhaging | 225-CSPBGA, 13 x 13 mm |
| Package Pin Count | 225 pins |
| External ADC Signal Pairs | 4 differential pairs |
| Power Profile | Low-power ordering option |
| Temperature Grade | Industrial |
| Uri ng Pagpapasok | Surface-mount BGA |
Gabay sa Pin Configuration ng XC7Z010-L1CLG225I 225 pins
Pin configuration para sa XC7Z010-L1CLG225I (225 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z010-L1CLG225I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z010-L1CLG225I ay nararapat para sa 6 aplikasyons: Industrial Control Gateway, Embedded Linux Edge System, Machine Vision Processing, Data Acquisition Controller, Communication Concentrator, Sensor Processing Platform.
Industrial Control Gateway
The XC7Z010-L1CLG225I fits industrial gateways that combine protocol management with deterministic I/O processing. Its dual-core 667 MHz ARM Cortex-A9 MPCore processor can run the supervisory operating system, networking stack, and configuration logic, while the 28K Artix-7 fabric can handle protocol conversion, timers, and parallel interface control. The 225-CSPBGA package permits compact integration of the control and communications functions. In a typical design, the processor communicates with external sensors through the programmable fabric and isolates latency-critical transactions from non-real-time software tasks. The low-power ordering option is relevant to continuously energized cabinets, although the final power budget must be validated against processor activity, enabled fabric resources, memory access, and the selected 1.2 V and 3.3 V regulators.
Inirekomenda
Embedded Linux Edge System
The XC7Z010-L1CLG225I supports compact embedded Linux edge systems where a conventional processor alone would require additional programmable logic. The 667 MHz dual-core ARM Cortex-A9 MPCore subsystem executes the operating system, network services, and application workloads, while the 28K FPGA fabric can provide custom boot or peripheral logic without occupying processor pins. In this architecture, the programmable logic can accelerate packet filtering, data formatting, or sensor fusion and exchange data with the processor through a memory-mapped interface. A production board must provide a supported DDR memory topology, boot storage, stable clocking, and correct power sequencing. The integrated architecture can reduce board area compared with a separate processor and FPGA, but software drivers and hardware bitstreams must be coordinated to avoid resource conflicts.
Inirekomenda
Machine Vision Processing
The XC7Z010-L1CLG225I is appropriate for machine-vision controllers that divide pixel transport and preprocessing between programmable logic and software. The 28K Artix-7 fabric can implement camera-data capture, line and pixel pipelines, thresholding, color classification, or frame-buffer control, while the 667 MHz dual-core ARM Cortex-A9 processor runs recognition software and communicates with the host. Placing deterministic acquisition functions in the FPGA reduces processor interrupt and transfer overhead. The device's four external ADC signal pairs, as identified for the 7z010 CLG225 family, can support auxiliary analog monitoring where the system architecture requires them. Thermal performance and video bandwidth should be evaluated with representative sensor resolutions, frame rates, memory configurations, and continuous image-processing workloads.
Inirekomenda
Data Acquisition Controller
The XC7Z010-L1CLG225I can serve as the control core of a synchronized data-acquisition system. Its ARM Cortex-A9 processor handles configuration, calibration, timestamps, storage management, and communication, while the 28K FPGA fabric executes sampling control, digital filtering, trigger logic, and high-rate buffering. The CLG225 package includes four external ADC signal pairs according to AMD's Zynq-7000 CLG225 documentation, allowing auxiliary measurements to be integrated with the digital acquisition path. Separating acquisition control into the fabric makes timing more deterministic than relying only on software sampling. The design must still account for analog bandwidth, memory bandwidth, clock jitter, input loading, and thermal conditions at the operating temperature. A bootable software image and configuration mechanism should be included so that both processor firmware and FPGA bitstream are reproduced consistently in production.
Inirekomenda
Communication Concentrator
The XC7Z010-L1CLG225I is suitable for communication concentrators that need flexible protocol termination alongside a hosted processor. The dual-core 667 MHz ARM Cortex-A9 MPCore processor can manage routing tables, management software, and network services, while the programmable fabric handles low-latency packet framing, framing checks, buffering, or custom serial interfaces. This division allows frequently used traffic to be handled in dedicated hardware while the processor concentrates on control-plane tasks. The 225-CSPBGA package helps reduce board area in distributed telemetry and communications equipment. For deployment, validate worst-case traffic handling, DDR timing, external PHY behavior, clocking, and power integrity. The low-power ordering option is useful in remotely powered installations, but transmit activity and memory-intensive transfers must be included in the final energy and thermal assessment.
Inirekomenda
Sensor Processing Platform
The XC7Z010-L1CLG225I can combine sensor conditioning, acquisition, and higher-level processing in one programmable platform. The 28K Artix-7 fabric can implement sensor timing, filtering, threshold logic, and sensor-specific interfaces, while the 667 MHz dual-core ARM Cortex-A9 processor runs diagnostics, local analytics, and configuration management. Four external ADC signal pairs documented for the 7z010 CLG225 devices provide analog monitoring functions alongside the digital sensor path. This architecture is applicable to condition monitoring, environmental sensing, and industrial measurement nodes where deterministic sampling and flexible post-processing are both important. Because the target ordering code is industrial-temperature, board components and enclosure thermal design must preserve the required operating margin. Validation should cover sampling accuracy, sensor drive levels, clock accuracy, software latency, and processor-plus-fabric power at worst-case activity.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z010-L1CLG225I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z010-1CLG225I | XC7Z010-2CLG225I | XC7Z010-1CLG225C | XC7Z010-2CLG225C | XC7Z010-L1CLG225C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) | 225-CSPBGA (13 x 13 mm) |
| Logic Cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells | 28K cells |
| Application Processor | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz | 667 MHz | 766 MHz | 667 MHz | 766 MHz | 667 MHz |
| Power Ordering Option | L1 low-power | Standard ordering option | Standard ordering option | Standard ordering option | Standard ordering option | L1 low-power |
| Temperature Grade | Industrial | Industrial | Industrial | Commercial | Commercial | Commercial |
| Supply Voltage | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V | 1.2 V and 3.3 V |
| External ADC Signal Pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs | 4 differential pairs |
Pangunahing mga Pagkakaiba
- Low-power ordering option within the XC7Z010 family (kumpara saXC7Z010-1CLG225I)
- Industrial-temperature package option (kumpara saXC7Z010-1CLG225C)
- Higher-frequency same-package alternative (kumpara saXC7Z010-2CLG225I)
Talaan ng Disenyo
Use the AMD Zynq-7000 power-sequencing and decoupling guidance to design the 1.2 V and 3.3 V rails. Place the recommended bulk and high-frequency decoupling capacitors at their designated package balls, keep the return path continuous, and control switching-regulator layout so the processor and FPGA rails remain within their specified limits. Validate startup, shutdown, current transients, and rail sequencing across temperature before production release.
Treat the 225-CSPBGA as a demanding escape-routing problem. Follow the official CLG225 package files and UG865 for every ball assignment, including power, ground, configuration, and dedicated pins. Plan via and through-via structures against the required ball pitch, preserve antipads, and review return paths for high-speed memory and serial interfaces. A mechanically compatible BGA outline does not guarantee that an arbitrary PCB stack-up will route or signal correctly.
Estimate junction temperature from the actual processor and FPGA workload, package power loss, board copper, airflow, and the PCB thermal design rather than using logic-cell count alone. Fabric utilization, DDR traffic, and processor utilization can change power substantially. Test the populated assembly at the highest expected ambient temperature, include accessory and interface power when assessing system thermal margins, and verify that the board design preserves the required exposed-pad heat-transfer path.
Do not treat XC7Z010 CLG400 variants as drop-in alternatives for CLG225 boards; their package dimensions, ball counts, and routing requirements differ. Likewise, an ordering-code change from L1 to a standard 1 or 2 speed grade can alter the power profile, maximum frequency, and qualification constraints. Record the approved full MPN in the schematic, bill of materials, bitstream configuration, and production test procedure so an equivalent-looking order code is not substituted inadvertently.
Impormasyon ng Pagsunod sa Kautusan
The industrial-temperature ordering suffix does not by itself establish AEC-Q100 qualification. Compliance declarations must be confirmed for the exact device and current manufacturer documentation.