XMC4104Q48K64BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
Référence : XMC4104Q48K64BAXUMA1 ✓ ActifXMC4104Q48K64BAXUMA1 Présentation
An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor core integrated with embedded memory, peripherals, and interrupt-control resources. In the broader semiconductor hierarchy, the XMC4104Q48K64BAXUMA1 is a microcontroller, then a microcontroller IC, and ultimately a semiconductor intended for embedded control. Its combination of 80 MHz processing performance, 64 KB flash, and 20 KB SRAM provides a practical balance between computational throughput, firmware storage, and working memory for compact control systems.
The verified device information identifies a 3.3 V operating supply, 32-bit processing, 64 KB of flash organized as 64K x 8, and an 80 MHz Cortex-M4 core. The XMC4000 family also provides mixed-signal and digital resources for industrial embedded designs. The 48-pin VQFN package with exposed pad supports compact, surface-mount layouts while providing a thermal and electrical land pattern for compact control systems.
Typical uses include industrial automation, motor and motion control, sensor acquisition, digital power conversion, communications gateways, and embedded equipment controllers. In each case, the Cortex-M4 core handles deterministic control software, while flash stores firmware and SRAM supports working state, data buffers, and peripheral-handling routines. The 20 KB SRAM is especially relevant to stack depth, communication buffers, and intermediate signal-processing results.
PCB implementation should follow the manufacturer's package drawing and land pattern exactly. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from high-current switching nodes, and provide adequate copper around the exposed pad. Because the verified web results do not provide the complete pin names, electrical limits, or timing tables, those details must be confirmed in the Infineon datasheet before schematic capture or PCB release.
This page consolidates the verified manufacturer identity, core speed, memory configuration, package information, distributor availability references, and same-family drop-in candidates into a design-focused overview. It also distinguishes confirmed facts from parameters that still require datasheet verification, helping engineers identify suitable XMC4000 alternatives without treating a similar package as proof of complete compatibility.
Alternatives de remplacement direct pour XMC4104Q48K64BAXUMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XMC4104Q48K64BAXUMA1 (même facteur de forme et même empreinte) — différant par Package, Product Type, Series, Flash Memory, Architecture.
XMC4104Q48K64ABXUMA1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XMC4108-Q48K64BA
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XMC4108-Q48K64AB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XMC4100-Q48K64-BA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XMC4102-Q48K64-BA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XMC4104Q48K64BAXUMA1 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit industrial ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 20 KB |
| Tension d'alimentation | 3.3 V |
| Architecture | 32-bit ARM RISC |
| Series | XMC4000 |
| Boîtier | 48-pin VQFN with exposed pad |
| Package Designation | PG-VQFN-48-53 |
| Type de montage | Surface Mount |
Guide de configuration des broches du XMC4104Q48K64BAXUMA1 pg-vqfn-48-53
Configuration des broches du XMC4104Q48K64BAXUMA1 (boîtier pg-vqfn-48-53). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XMC4104Q48K64BAXUMA1.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XMC4104Q48K64BAXUMA1 convient pour 6 applications: Industrial Automation Controller, Motor and Motion Control, Sensor Acquisition and Condition Monitoring, Digital Power Supply Control, Industrial Communications Gateway, Embedded Communications Controller.
Industrial Automation Controller
The XMC4104Q48K64BAXUMA1 fits compact industrial automation controllers because its 80 MHz Cortex-M4 core provides deterministic processing performance while 64 KB of flash and 20 KB of SRAM support embedded control firmware, communication buffers, and intermediate process data. The 48-pin VQFN format also helps reduce controller-board area compared with larger leaded packages. Use the MCU for sequencing, state-machine control, signal conditioning, and supervisory logic, while confirming that every required peripheral and pin is present in the official datasheet. The main design consideration is firmware capacity: 64 KB is sufficient for many focused control tasks but may require partitioning for large protocol stacks, diagnostic logs, or safety functions.
Recommandé
Motor and Motion Control
The XMC4104Q48K64BAXUMA1 is suitable for embedded motor and motion-control functions where an 80 MHz Cortex-M4 core can execute control loops, position logic, and supervisory tasks. Its 20 KB of SRAM provides useful working space for control variables, sampled positions, and communication data, while the 64 KB flash stores the motion-control application. The device should be positioned according to its verified timer and analog capabilities rather than assumed to contain every PWM, capture, or encoder interface. External drivers may be required for power-stage isolation. Validate timer channels, trigger routing, and analog input functions in the datasheet because these details are not present in the supplied verified excerpts.
Recommandé
Sensor Acquisition and Condition Monitoring
The XMC4104Q48K64BAXUMA1 can act as the control and processing MCU in a sensor-acquisition or condition-monitoring module. The 80 MHz core supports time stamping, filtering, scaling, diagnostics, and communication framing, while 20 KB of SRAM can hold sampled buffers and working variables. Its 3.3 V supply and compact 48-pin VQFN package are consistent with space-constrained embedded instrumentation. The verified data does not disclose the ADC resolution, input count, sample rate, or sensor interfaces, so analog suitability must be established from the manufacturer datasheet. In precision measurement designs, separate analog and digital return paths and careful reference-decoupling layout are essential to prevent sensor signals from sharing noisy return currents with digital circuitry.
Recommandé
Digital Power Supply Control
The XMC4104Q48K64BAXUMA1 is applicable to supervisory control in digital power-conversion equipment, where the Cortex-M4 core can execute conversion algorithms, monitor state variables, and coordinate communications. Its 80 MHz processing rate and 20 KB of SRAM provide resources for control-loop computation and buffering, while 64 KB of flash can hold compact supervisory firmware. The MCU is not itself a power stage and should not be treated as a replacement for MOSFETs, gate drivers, or power inductors. Exact suitability depends on the confirmed ADC, timer, PWM, and communication resources, none of which are quantified in the supplied search extracts. Production implementation should verify loop timing, fault-response latency, and watchdog behavior in the manufacturer documentation.
Recommandé
Industrial Communications Gateway
The XMC4104Q48K64BAXUMA1 is suitable for compact industrial communications gateways when a design requires local protocol processing rather than simple pass-through operation. Its 80 MHz Cortex-M4 core can frame and validate messages, maintain device state, and coordinate multiple external interfaces, while 64 KB of flash and 20 KB of SRAM provide space for a focused gateway application. The 48-pin VQFN package assists compact board construction, and the 3.3 V supply can support integration with modern industrial interface circuitry. The verified extracts do not enumerate CAN, Ethernet, UART, or other communication peripherals, so the selected XMC4104 order code must be checked for the required interface set. Isolation, surge protection, and termination should be implemented according to the selected bus standard.
Recommandé
Embedded Communications Controller
The XMC4104Q48K64BAXUMA1 can serve as the embedded controller in communications equipment that requires deterministic firmware execution and modest local data storage. At 80 MHz, the Cortex-M4 core can process command frames, maintain protocol state, and perform supervisory tasks, while the 20 KB SRAM supports packet buffers and working queues. The 64 KB flash footprint is appropriate for compact protocol stacks but should be checked against bootloader, security, and application code requirements. Because the supplied data does not identify the available serial interfaces or pin multiplexing, engineers should confirm UART, SPI, I2C, CAN, and USB requirements directly in the Infineon documentation. A three-tier clock, reset, and boot architecture is also necessary for reliable firmware updates and field recovery.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC4104Q48K64BAXUMA1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XMC4104Q48K64ABXUMA1 | XMC4108-Q48K64BA | XMC4108-Q48K64AB | XMC4100-Q48K64-BA | XMC4102-Q48K64-BA |
|---|---|---|---|---|---|---|
| Package | 48-pin VQFN (PG-VQFN-48-53) | 48-pin VQFN (PG-VQFN-48-53) | 48-pin VQFN (PG-VQFN-48-53) | 48-pin VQFN (PG-VQFN-48-53) | 48-pin VQFN (PG-VQFN-48-53) | 48-pin VQFN (PG-VQFN-48-53) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Flash Memory | 64 KB (64K x 8) | 64 KB (64K x 8) | 64 KB | 64 KB | 64 KB | 64 KB |
| Series | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
| Architecture | 32-bit ARM RISC | 32-bit ARM RISC | 32-bit ARM RISC | 32-bit ARM RISC | 32-bit ARM RISC | 32-bit ARM RISC |
| Qualification and Configuration | Industrial XMC4104 BA configuration | AB configuration; verify ordering table | XMC4108 BA configuration; different peripheral complement | XMC4108 AB configuration; different peripheral complement | XMC4100 configuration; different peripheral complement | XMC4102 configuration; different peripheral complement |
Principaux différenciateurs
- Closest evidenced ordering alternative (vs XMC4104Q48K64ABXUMA1)
- Matched memory capacity without a larger flash configuration (vs XMC4108-Q48K64BA)
- Focused XMC4104 industrial positioning (vs XMC4100-Q48K64-BA)
Notes de conception
Use the exact PG-VQFN-48-53 land pattern and exposed-pad geometry from the Infineon package drawing rather than creating a generic 48-pin VQFN footprint. The exposed pad is part of the thermal and electrical design and must be connected according to the datasheet. Place all required decoupling capacitors adjacent to their associated supply pins, preserve the manufacturer-recommended via arrangement beneath the pad, and maintain short return paths. Because the verified excerpts do not include the numbered pin list, release the layout only after checking every power, ground, analog, and debug connection against the official datasheet.
Design the 3.3 V supply rail for both static and transient requirements rather than treating the nominal voltage as sufficient evidence of regulator compatibility. Verify the device's required input capacitors, voltage tolerance, startup behavior, and maximum supply limits in the manufacturer datasheet. Place high-current and switching-return paths away from sensitive analog and communication ground references. If the MCU controls a power-conversion stage, provide local bulk energy near the power devices and avoid routing transient current through the MCU area, where the shared exposed-pad connection could couple switching noise into the controller.
Do not substitute a similarly named XMC4100, XMC4102, XMC4104, or XMC4108 device solely because it uses a 48-pin VQFN and contains 64 KB of flash. Same-package construction is necessary but not sufficient for drop-in use. Compare peripheral availability, alternate-function routing, analog and timer assignments, debug interfaces, clock requirements, operating-temperature grade, exposed-pad layout, and qualification for every pin used by the design. For software migration, review startup files, linker configuration, register differences, and peripheral-library support rather than assuming binary firmware compatibility.
Informations de conformité
The verified search extracts identify the part as an industrial microcontroller but provide no exact-MPN RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration. AEC-Q100 is not applicable because no automotive qualification is stated for this exact order code.
