XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
Référence : XMC4500F100F1024AC ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $11.8 | $11,80 |
| 10 | $10.62 | $106,20 |
| 100 | $9.45 | $945,00 |
| 500 | $8.55 | $4 275,00 |
| 1 000 | $7.95 | $7 950,00 |
XMC4500F100F1024AC Présentation
An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy.
Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch.
The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs.
Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control.
When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader.
This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.
Alternatives de remplacement direct pour XMC4500F100F1024AC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XMC4500F100F1024AC (même facteur de forme et même empreinte) — différant par ADC, Operating Temperature, Package, SRAM, CAN Nodes.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
XMC4500F100K1024AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500F100F1024AA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500F100F512AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500F100F1024ABXQMA1
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4500F100K1024ACXQSA1
✅ Remplacement direct✓ En stock
$9.2 / unité
Voir la fiche technique →STM32F407VGT6
✅ Remplacement direct✓ En stock
$7.55 / unité
Voir la fiche technique →XMC4500F100F1024AC Valeurs maximales et caractéristiques électriques
| Product Family | XMC4000 Series |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions |
| Core Frequency | 120 MHz |
| Program Flash | 1024 KB |
| SRAM | 160 KB |
| Supply Voltage (VDD) | 3.13 V to 3.63 V |
| Boîtier | LQFP-100 (14x14 mm, 0.5 mm pitch) |
| Température de fonctionnement | -40C to +85C (industrial) |
| Type de montage | Surface Mount |
| Ethernet MAC | 10/100 Mbit integrated MAC (MII/RMII) |
| USB | USB 2.0 Full-Speed Device/Host |
| CAN Nodes | 6 (CAN 2.0B) |
| USIC Channels | 6 (UART/SPI/I2C/I2S configurable) |
| ADC | 2 x 12-bit, up to 26 channels, 2 MSPS |
| CCU6 PWM Units | 2 (motor control and power conversion) |
| DMA Channels | 12 (for peripheral-to-memory transfers) |
| Statut RoHS | Compliant |
| Niveau MSL | 3 (168 hours) |
Configuration des broches de XMC4500F100F1024AC
| Broche 1 | VDD — Core supply voltage 3.3V |
| Broche 2 | VSS — Ground reference |
| Broche 3 | XTAL1 — Crystal oscillator input |
| Broche 4 | XTAL2 — Crystal oscillator output |
| Broche 5 | NRST — Reset input, active low |
| Broche 6 | TMS — SWD Test Mode Select |
| Broche 7 | TCK — SWD Test Clock |
| Broche 8 | TDI — SWD Test Data In |
| Broche 9 | TDO — SWD Test Data Out |
| Broche 10 | P0.0 — GPIO / alternate function |
| Broche 11 | P0.1 — GPIO / alternate function |
| Broche 12 | P0.2 — GPIO / alternate function |
| Broche 13 | P0.3 — GPIO / alternate function |
| Broche 14 | P0.4 — GPIO / alternate function |
| Broche 15 | P0.5 — GPIO / alternate function |
| Broche 16 | P0.6 — GPIO / alternate function |
| Broche 17 | P0.7 — GPIO / alternate function |
| Broche 18 | P0.9 — GPIO / alternate function |
| Broche 19 | P0.10 — GPIO / alternate function |
| Broche 20 | P0.11 — GPIO / alternate function |
| Broche 21 | P0.12 — GPIO / alternate function |
| Broche 22 | VSS — Ground reference |
| Broche 23 | VDD — Core supply voltage 3.3V |
| Broche 24 | P1.0 — GPIO / alternate function |
| Broche 25 | P1.1 — GPIO / alternate function |
| Broche 26 | P1.2 — GPIO / alternate function |
| Broche 27 | P1.3 — GPIO / alternate function |
| Broche 28 | P1.4 — GPIO / alternate function |
| Broche 29 | P1.5 — GPIO / alternate function |
| Broche 30 | P1.6 — GPIO / alternate function |
| Broche 31 | P1.7 — GPIO / alternate function |
| Broche 32 | P1.8 — GPIO / alternate function |
| Broche 33 | P1.9 — GPIO / alternate function |
| Broche 34 | P1.10 — GPIO / alternate function |
| Broche 35 | P1.11 — GPIO / alternate function |
| Broche 36 | P1.12 — GPIO / alternate function |
| Broche 37 | P1.13 — GPIO / alternate function |
| Broche 38 | P1.14 — GPIO / alternate function |
| Broche 39 | P1.15 — GPIO / alternate function |
| Broche 40 | VSS — Ground reference |
| Broche 41 | VDDP — Peripheral supply voltage 3.3V |
| Broche 42 | P2.0 — GPIO / alternate function |
| Broche 43 | P2.1 — GPIO / alternate function |
| Broche 44 | P2.2 — GPIO / alternate function |
| Broche 45 | P2.3 — GPIO / alternate function |
| Broche 46 | P2.4 — GPIO / alternate function |
| Broche 47 | P2.5 — GPIO / alternate function |
| Broche 48 | P2.6 — GPIO / alternate function |
| Broche 49 | P2.7 — GPIO / alternate function |
| Broche 50 | P2.8 — GPIO / alternate function |
| Broche 51 | P2.9 — GPIO / alternate function |
| Broche 52 | P2.10 — GPIO / alternate function |
| Broche 53 | P2.11 — GPIO / alternate function |
| Broche 54 | P2.12 — GPIO / alternate function |
| Broche 55 | P2.13 — GPIO / alternate function |
| Broche 56 | P2.14 — GPIO / alternate function |
| Broche 57 | P3.0 — GPIO / alternate function |
| Broche 58 | P3.1 — GPIO / alternate function |
| Broche 59 | P3.2 — GPIO / alternate function |
| Broche 60 | P3.3 — GPIO / alternate function |
| Broche 61 | P3.4 — GPIO / alternate function |
| Broche 62 | P3.5 — GPIO / alternate function |
| Broche 63 | P3.6 — GPIO / alternate function |
| Broche 64 | VSS — Ground reference |
| Broche 65 | VDD — Core supply voltage 3.3V |
| Broche 66 | P4.0 — GPIO / alternate function |
| Broche 67 | P4.1 — GPIO / alternate function |
| Broche 68 | P4.2 — GPIO / alternate function |
| Broche 69 | P4.3 — GPIO / alternate function |
| Broche 70 | P4.4 — GPIO / alternate function |
| Broche 71 | P4.5 — GPIO / alternate function |
| Broche 72 | P4.6 — GPIO / alternate function |
| Broche 73 | P4.7 — GPIO / alternate function |
| Broche 74 | P4.8 — GPIO / alternate function |
| Broche 75 | P4.9 — GPIO / alternate function |
| Broche 76 | P5.0 — GPIO / alternate function |
| Broche 77 | P5.1 — GPIO / alternate function |
| Broche 78 | P5.2 — GPIO / alternate function |
| Broche 79 | P5.3 — GPIO / alternate function |
| Broche 80 | P5.4 — GPIO / alternate function |
| Broche 81 | P5.5 — GPIO / alternate function |
| Broche 82 | P5.6 — GPIO / alternate function |
| Broche 83 | P5.7 — GPIO / alternate function |
| Broche 84 | P5.8 — GPIO / alternate function |
| Broche 85 | P5.9 — GPIO / alternate function |
| Broche 86 | VDDP — Peripheral supply voltage 3.3V |
| Broche 87 | VSS — Ground reference |
| Broche 88 | USB_DP — USB 2.0 Full-Speed D+ |
| Broche 89 | USB_DM — USB 2.0 Full-Speed D- |
| Broche 90 | ETH_TX_P — Ethernet MAC MII/RMII transmit positive |
| Broche 91 | ETH_TX_N — Ethernet MAC MII/RMII transmit negative |
| Broche 92 | ETH_RX_P — Ethernet MAC MII/RMII receive positive |
| Broche 93 | ETH_RX_N — Ethernet MAC MII/RMII receive negative |
| Broche 94 | CAN1_RX — CAN node 1 receive |
| Broche 95 | CAN1_TX — CAN node 1 transmit |
| Broche 96 | CAN2_RX — CAN node 2 receive |
| Broche 97 | CAN2_TX — CAN node 2 transmit |
| Broche 98 | ADC0_CH0 — 12-bit ADC channel 0 |
| Broche 99 | ADC0_CH1 — 12-bit ADC channel 1 |
| Broche 100 | ADC0_CH2 — 12-bit ADC channel 2 |
Applications typiques
XMC4500F100F1024AC convient pour 6 applications: Industrial Servo Drives, Digital Power Conversion (SMPS Controllers), Solar Inverters and PV String Optimizers, Industrial PLC I/O Modules, Field-Oriented Motor Control (FOC) for EV and Robotics, Building Automation Controllers (BACnet / Modbus).
Industrial Servo Drives
The XMC4500F100F1024AC is well suited to industrial servo drives because its dual CCU6 timer units generate the six complementary PWM signals required for three-phase motor control. The Cortex-M4 core with FPU and DSP instructions at 120 MHz provides the computational throughput for field-oriented control (FOC) loops within the typical 16 kHz cycle. The 6 CAN nodes and integrated Ethernet MAC enable EtherCAT, CANopen, or PROFINET slave connectivity for industrial servo drives in factory automation systems.
Recommandé
Digital Power Conversion (SMPS Controllers)
The XMC4500F100F1024AC fits digital power conversion applications because of its HRPWM unit (high-resolution PWM), 12-bit 2 MSPS ADCs, and Cortex-M4F performance at 120 MHz for closed-loop control math. Dual 12-bit ADC units with up to 26 channels enable simultaneous voltage and current sensing across multi-phase topologies. Infineon's DAVE firmware ecosystem provides reference vector control libraries and digital PFC code, accelerating time-to-market for solar inverters, telecom rectifiers, and digital LED drivers.
Recommandé
Solar Inverters and PV String Optimizers
The XMC4500F100F1024AC fits solar inverters and PV string optimizers because its HRPWM delivers fine-grained duty-cycle resolution for MPPT and grid-tie inverter control loops. The 1024 KB Flash stores both the application code and grid-tie support libraries, and the Ethernet MAC enables Modbus TCP or Sunspec communication for monitoring. Six CAN nodes connect to module-level electronics. Operating temperature range of -40C to +85C supports rooftop inverter enclosures under direct solar exposure.
Recommandé
Industrial PLC I/O Modules
The XMC4500F100F1024AC fits industrial PLC I/O modules because of its six CAN nodes for CANopen I/O expansion, six USIC channels for RS-485/RS-232 sensor connectivity, and integrated Ethernet MAC for PROFINET/EtherNet/IP slave interfaces. The 160 KB SRAM supports large process-image buffers for high-density digital I/O modules, and the 1024 KB Flash enables on-board Modbus, PROFIBUS, or EtherCAT slave stacks without external memory expansion. Wide -40C to +85C industrial temperature range supports cabinet-mounted control cabinets.
Recommandé
Field-Oriented Motor Control (FOC) for EV and Robotics
The XMC4500F100F1024AC fits FOC motor control in robotics and small electric vehicles because its Cortex-M4F core handles FOC math (Park/Clarke transforms, SVM) within tight control cycles, while dedicated CCU6 timers produce the six PWM channels with dead-time insertion. Dual 12-bit ADCs synchronously sample phase currents at the PWM centre point. The CAN bus interface integrates with vehicle CAN networks, and the wide operating temperature supports automotive under-hood environments in appropriate sealed enclosures.
Recommandé
Building Automation Controllers (BACnet / Modbus)
The XMC4500F100F1024AC fits building automation controllers because its six USIC channels support RS-485 BACnet MS-TP or Modbus RTU fieldbus connectivity, while the Ethernet MAC enables BACnet/IP or Modbus TCP communication on the building network. The Cortex-M4F performance runs multiple protocol stacks simultaneously. The 1024 KB Flash stores application firmware, BACnet/Modbus stacks, and webserver interfaces for HVAC, lighting, and access control panels across commercial buildings and data centres.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC4500F100F1024AC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XMC4500F100K1024AC | XMC4500F100F1024AA | XMC4500F100F512AC | XMC4500F100F1024ABXQMA1 | XMC4500F100K1024ACXQSA1 | STM32F407VGT6 |
|---|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon | STMicroelectronics |
| Package | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Core | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 168 MHz |
| Flash Memory | 1024 KB | 1024 KB | 1024 KB | 512 KB | 1024 KB | 1024 KB | 1024 KB |
| SRAM | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB | 192 KB |
| Ethernet MAC | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) |
| CAN Nodes | 6 | 6 | 6 | 6 | 6 | 6 | 2 (bxCAN) |
| CCU6 PWM Units | 2 | 2 | 2 | 2 | 2 | 2 | No CCU6; uses general-purpose timers |
Principaux différenciateurs
- Dedicated CCU6 and HRPWM timer blocks for digital power conversion (vs STM32F407VGT6)
- Six native CAN 2.0B nodes for industrial multi-bus applications (vs STM32F407VGT6)
- Native 10/100 Ethernet MAC with MII/RMII without external bridge ICs (vs XMC4300-F100F256)
Notes de conception
Decouple every VDD and VDDP pin with a 100 nF X7R ceramic capacitor placed within 5 mm of the respective supply pin, plus one bulk 4.7 µF ceramic per supply rail. The XMC4500 has separate core (VDD) and I/O (VDDP) supplies that must both be powered during normal operation. Power-on-reset behaviour and NRST hold timing are defined in the Infineon datasheet; ensure VDDP and VDD rise within 10 ms of each other to avoid undefined peripheral state.
Place the 25 MHz crystal or external clock source within 5 mm of the XTAL1/XTAL2 pins and guard the traces with a ground pour on both sides of the PCB. Route USB_DP/USB_DM as a 90-ohm differential pair and Ethernet MII/RMII signals as 50-ohm single-ended or 100-ohm differential pairs. Avoid routing high-speed signals (USB, Ethernet, HRPWM) directly under or above the crystal traces to minimise crosstalk.
The LQFP-100 package has a junction-to-ambient thermal resistance (theta_JA) of approximately 40 C/W on a 2-layer PCB with modest copper. At maximum CPU activity (120 MHz, all peripherals active), power dissipation is in the order of 200-300 mW, giving a junction temperature rise of 8-12 C above ambient. No heatsink is required for typical industrial applications. Designers should validate thermal behaviour in fully sealed enclosures where convection is limited.
Common pitfalls with XMC4500 include: (1) forgetting that VDDP must be present for any GPIO to operate, even when the core is held in standby; (2) failing to configure the boot mode pins before reset release, which can lock the device into an unexpected boot mode; (3) using the wrong CAN transceiver voltage class (XMC4500 CAN I/O is 3.3V); (4) neglecting to enable the peripheral clock before accessing peripheral registers, which causes silent bus faults. Always refer to the Infineon reference manual register descriptions.
For 100 Mbps Ethernet via MII, route TX_CLK, RX_CLK, TXD[3:0], RXD[3:0], TX_EN, RX_ER, CRS_DV as 50-ohm single-ended traces to a length-matched bus within 50 mm of the RJ45 magnetics. For RMII, route the 50 MHz reference clock with strict length matching to all RMII signals. Place the Ethernet PHY's 25 MHz crystal close to the PHY and provide a clean, isolated ground reference. Do not share switching power-supply grounds with the Ethernet PHY grounds.
Informations de conformité
RoHS compliant per Infineon product page. Not AEC-Q100 qualified - for automotive applications consider XMC4400 or AURIX series. Industrial-grade temperature range -40C to +85C confirmed by F-grade ordering designation.
