XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
N.º da peça: XMC4500F100F1024AC ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.8 | $11,80 |
| 10 | $10.62 | $106,20 |
| 100 | $9.45 | $945,00 |
| 500 | $8.55 | $4.275,00 |
| 1.000 | $7.95 | $7.950,00 |
XMC4500F100F1024AC Visão geral
An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy.
Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch.
The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs.
Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control.
When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader.
This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.
Alternativas drop-in para XMC4500F100F1024AC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XMC4500F100F1024AC (mesmo formato e footprint) — diferindo em ADC, Operating Temperature, Package, SRAM, CAN Nodes.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XMC4500F100K1024AC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4500F100F1024AA
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4500F100F512AC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4500F100F1024ABXQMA1
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4500F100K1024ACXQSA1
✅ Drop-In✓ Em estoque
$9.2 / unidade
Ver ficha técnica →STM32F407VGT6
✅ Drop-In✓ Em estoque
$7.55 / unidade
Ver ficha técnica →XMC4500F100F1024AC Classificações máximas e características elétricas
| Product Family | XMC4000 Series |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions |
| Core Frequency | 120 MHz |
| Program Flash | 1024 KB |
| SRAM | 160 KB |
| Supply Voltage (VDD) | 3.13 V to 3.63 V |
| Encapsulamento | LQFP-100 (14x14 mm, 0.5 mm pitch) |
| Temperatura de operação | -40C to +85C (industrial) |
| Tipo de montagem | Surface Mount |
| Ethernet MAC | 10/100 Mbit integrated MAC (MII/RMII) |
| USB | USB 2.0 Full-Speed Device/Host |
| CAN Nodes | 6 (CAN 2.0B) |
| USIC Channels | 6 (UART/SPI/I2C/I2S configurable) |
| ADC | 2 x 12-bit, up to 26 channels, 2 MSPS |
| CCU6 PWM Units | 2 (motor control and power conversion) |
| DMA Channels | 12 (for peripheral-to-memory transfers) |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
Configuração de pinos do XMC4500F100F1024AC
| Pino 1 | VDD — Core supply voltage 3.3V |
| Pino 2 | VSS — Ground reference |
| Pino 3 | XTAL1 — Crystal oscillator input |
| Pino 4 | XTAL2 — Crystal oscillator output |
| Pino 5 | NRST — Reset input, active low |
| Pino 6 | TMS — SWD Test Mode Select |
| Pino 7 | TCK — SWD Test Clock |
| Pino 8 | TDI — SWD Test Data In |
| Pino 9 | TDO — SWD Test Data Out |
| Pino 10 | P0.0 — GPIO / alternate function |
| Pino 11 | P0.1 — GPIO / alternate function |
| Pino 12 | P0.2 — GPIO / alternate function |
| Pino 13 | P0.3 — GPIO / alternate function |
| Pino 14 | P0.4 — GPIO / alternate function |
| Pino 15 | P0.5 — GPIO / alternate function |
| Pino 16 | P0.6 — GPIO / alternate function |
| Pino 17 | P0.7 — GPIO / alternate function |
| Pino 18 | P0.9 — GPIO / alternate function |
| Pino 19 | P0.10 — GPIO / alternate function |
| Pino 20 | P0.11 — GPIO / alternate function |
| Pino 21 | P0.12 — GPIO / alternate function |
| Pino 22 | VSS — Ground reference |
| Pino 23 | VDD — Core supply voltage 3.3V |
| Pino 24 | P1.0 — GPIO / alternate function |
| Pino 25 | P1.1 — GPIO / alternate function |
| Pino 26 | P1.2 — GPIO / alternate function |
| Pino 27 | P1.3 — GPIO / alternate function |
| Pino 28 | P1.4 — GPIO / alternate function |
| Pino 29 | P1.5 — GPIO / alternate function |
| Pino 30 | P1.6 — GPIO / alternate function |
| Pino 31 | P1.7 — GPIO / alternate function |
| Pino 32 | P1.8 — GPIO / alternate function |
| Pino 33 | P1.9 — GPIO / alternate function |
| Pino 34 | P1.10 — GPIO / alternate function |
| Pino 35 | P1.11 — GPIO / alternate function |
| Pino 36 | P1.12 — GPIO / alternate function |
| Pino 37 | P1.13 — GPIO / alternate function |
| Pino 38 | P1.14 — GPIO / alternate function |
| Pino 39 | P1.15 — GPIO / alternate function |
| Pino 40 | VSS — Ground reference |
| Pino 41 | VDDP — Peripheral supply voltage 3.3V |
| Pino 42 | P2.0 — GPIO / alternate function |
| Pino 43 | P2.1 — GPIO / alternate function |
| Pino 44 | P2.2 — GPIO / alternate function |
| Pino 45 | P2.3 — GPIO / alternate function |
| Pino 46 | P2.4 — GPIO / alternate function |
| Pino 47 | P2.5 — GPIO / alternate function |
| Pino 48 | P2.6 — GPIO / alternate function |
| Pino 49 | P2.7 — GPIO / alternate function |
| Pino 50 | P2.8 — GPIO / alternate function |
| Pino 51 | P2.9 — GPIO / alternate function |
| Pino 52 | P2.10 — GPIO / alternate function |
| Pino 53 | P2.11 — GPIO / alternate function |
| Pino 54 | P2.12 — GPIO / alternate function |
| Pino 55 | P2.13 — GPIO / alternate function |
| Pino 56 | P2.14 — GPIO / alternate function |
| Pino 57 | P3.0 — GPIO / alternate function |
| Pino 58 | P3.1 — GPIO / alternate function |
| Pino 59 | P3.2 — GPIO / alternate function |
| Pino 60 | P3.3 — GPIO / alternate function |
| Pino 61 | P3.4 — GPIO / alternate function |
| Pino 62 | P3.5 — GPIO / alternate function |
| Pino 63 | P3.6 — GPIO / alternate function |
| Pino 64 | VSS — Ground reference |
| Pino 65 | VDD — Core supply voltage 3.3V |
| Pino 66 | P4.0 — GPIO / alternate function |
| Pino 67 | P4.1 — GPIO / alternate function |
| Pino 68 | P4.2 — GPIO / alternate function |
| Pino 69 | P4.3 — GPIO / alternate function |
| Pino 70 | P4.4 — GPIO / alternate function |
| Pino 71 | P4.5 — GPIO / alternate function |
| Pino 72 | P4.6 — GPIO / alternate function |
| Pino 73 | P4.7 — GPIO / alternate function |
| Pino 74 | P4.8 — GPIO / alternate function |
| Pino 75 | P4.9 — GPIO / alternate function |
| Pino 76 | P5.0 — GPIO / alternate function |
| Pino 77 | P5.1 — GPIO / alternate function |
| Pino 78 | P5.2 — GPIO / alternate function |
| Pino 79 | P5.3 — GPIO / alternate function |
| Pino 80 | P5.4 — GPIO / alternate function |
| Pino 81 | P5.5 — GPIO / alternate function |
| Pino 82 | P5.6 — GPIO / alternate function |
| Pino 83 | P5.7 — GPIO / alternate function |
| Pino 84 | P5.8 — GPIO / alternate function |
| Pino 85 | P5.9 — GPIO / alternate function |
| Pino 86 | VDDP — Peripheral supply voltage 3.3V |
| Pino 87 | VSS — Ground reference |
| Pino 88 | USB_DP — USB 2.0 Full-Speed D+ |
| Pino 89 | USB_DM — USB 2.0 Full-Speed D- |
| Pino 90 | ETH_TX_P — Ethernet MAC MII/RMII transmit positive |
| Pino 91 | ETH_TX_N — Ethernet MAC MII/RMII transmit negative |
| Pino 92 | ETH_RX_P — Ethernet MAC MII/RMII receive positive |
| Pino 93 | ETH_RX_N — Ethernet MAC MII/RMII receive negative |
| Pino 94 | CAN1_RX — CAN node 1 receive |
| Pino 95 | CAN1_TX — CAN node 1 transmit |
| Pino 96 | CAN2_RX — CAN node 2 receive |
| Pino 97 | CAN2_TX — CAN node 2 transmit |
| Pino 98 | ADC0_CH0 — 12-bit ADC channel 0 |
| Pino 99 | ADC0_CH1 — 12-bit ADC channel 1 |
| Pino 100 | ADC0_CH2 — 12-bit ADC channel 2 |
Aplicações típicas
XMC4500F100F1024AC é adequado para 6 aplicaçãos: Industrial Servo Drives, Digital Power Conversion (SMPS Controllers), Solar Inverters and PV String Optimizers, Industrial PLC I/O Modules, Field-Oriented Motor Control (FOC) for EV and Robotics, Building Automation Controllers (BACnet / Modbus).
Industrial Servo Drives
The XMC4500F100F1024AC is well suited to industrial servo drives because its dual CCU6 timer units generate the six complementary PWM signals required for three-phase motor control. The Cortex-M4 core with FPU and DSP instructions at 120 MHz provides the computational throughput for field-oriented control (FOC) loops within the typical 16 kHz cycle. The 6 CAN nodes and integrated Ethernet MAC enable EtherCAT, CANopen, or PROFINET slave connectivity for industrial servo drives in factory automation systems.
Recomendado
Digital Power Conversion (SMPS Controllers)
The XMC4500F100F1024AC fits digital power conversion applications because of its HRPWM unit (high-resolution PWM), 12-bit 2 MSPS ADCs, and Cortex-M4F performance at 120 MHz for closed-loop control math. Dual 12-bit ADC units with up to 26 channels enable simultaneous voltage and current sensing across multi-phase topologies. Infineon's DAVE firmware ecosystem provides reference vector control libraries and digital PFC code, accelerating time-to-market for solar inverters, telecom rectifiers, and digital LED drivers.
Recomendado
Solar Inverters and PV String Optimizers
The XMC4500F100F1024AC fits solar inverters and PV string optimizers because its HRPWM delivers fine-grained duty-cycle resolution for MPPT and grid-tie inverter control loops. The 1024 KB Flash stores both the application code and grid-tie support libraries, and the Ethernet MAC enables Modbus TCP or Sunspec communication for monitoring. Six CAN nodes connect to module-level electronics. Operating temperature range of -40C to +85C supports rooftop inverter enclosures under direct solar exposure.
Recomendado
Industrial PLC I/O Modules
The XMC4500F100F1024AC fits industrial PLC I/O modules because of its six CAN nodes for CANopen I/O expansion, six USIC channels for RS-485/RS-232 sensor connectivity, and integrated Ethernet MAC for PROFINET/EtherNet/IP slave interfaces. The 160 KB SRAM supports large process-image buffers for high-density digital I/O modules, and the 1024 KB Flash enables on-board Modbus, PROFIBUS, or EtherCAT slave stacks without external memory expansion. Wide -40C to +85C industrial temperature range supports cabinet-mounted control cabinets.
Recomendado
Field-Oriented Motor Control (FOC) for EV and Robotics
The XMC4500F100F1024AC fits FOC motor control in robotics and small electric vehicles because its Cortex-M4F core handles FOC math (Park/Clarke transforms, SVM) within tight control cycles, while dedicated CCU6 timers produce the six PWM channels with dead-time insertion. Dual 12-bit ADCs synchronously sample phase currents at the PWM centre point. The CAN bus interface integrates with vehicle CAN networks, and the wide operating temperature supports automotive under-hood environments in appropriate sealed enclosures.
Recomendado
Building Automation Controllers (BACnet / Modbus)
The XMC4500F100F1024AC fits building automation controllers because its six USIC channels support RS-485 BACnet MS-TP or Modbus RTU fieldbus connectivity, while the Ethernet MAC enables BACnet/IP or Modbus TCP communication on the building network. The Cortex-M4F performance runs multiple protocol stacks simultaneously. The 1024 KB Flash stores application firmware, BACnet/Modbus stacks, and webserver interfaces for HVAC, lighting, and access control panels across commercial buildings and data centres.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XMC4500F100F1024AC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XMC4500F100K1024AC | XMC4500F100F1024AA | XMC4500F100F512AC | XMC4500F100F1024ABXQMA1 | XMC4500F100K1024ACXQSA1 | STM32F407VGT6 |
|---|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon | STMicroelectronics |
| Package | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Core | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 168 MHz |
| Flash Memory | 1024 KB | 1024 KB | 1024 KB | 512 KB | 1024 KB | 1024 KB | 1024 KB |
| SRAM | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB | 160 KB | 192 KB |
| Ethernet MAC | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) | Yes (MII/RMII) |
| CAN Nodes | 6 | 6 | 6 | 6 | 6 | 6 | 2 (bxCAN) |
| CCU6 PWM Units | 2 | 2 | 2 | 2 | 2 | 2 | No CCU6; uses general-purpose timers |
Principais diferenciais
- Dedicated CCU6 and HRPWM timer blocks for digital power conversion (vs STM32F407VGT6)
- Six native CAN 2.0B nodes for industrial multi-bus applications (vs STM32F407VGT6)
- Native 10/100 Ethernet MAC with MII/RMII without external bridge ICs (vs XMC4300-F100F256)
Notas de projeto
Decouple every VDD and VDDP pin with a 100 nF X7R ceramic capacitor placed within 5 mm of the respective supply pin, plus one bulk 4.7 µF ceramic per supply rail. The XMC4500 has separate core (VDD) and I/O (VDDP) supplies that must both be powered during normal operation. Power-on-reset behaviour and NRST hold timing are defined in the Infineon datasheet; ensure VDDP and VDD rise within 10 ms of each other to avoid undefined peripheral state.
Place the 25 MHz crystal or external clock source within 5 mm of the XTAL1/XTAL2 pins and guard the traces with a ground pour on both sides of the PCB. Route USB_DP/USB_DM as a 90-ohm differential pair and Ethernet MII/RMII signals as 50-ohm single-ended or 100-ohm differential pairs. Avoid routing high-speed signals (USB, Ethernet, HRPWM) directly under or above the crystal traces to minimise crosstalk.
The LQFP-100 package has a junction-to-ambient thermal resistance (theta_JA) of approximately 40 C/W on a 2-layer PCB with modest copper. At maximum CPU activity (120 MHz, all peripherals active), power dissipation is in the order of 200-300 mW, giving a junction temperature rise of 8-12 C above ambient. No heatsink is required for typical industrial applications. Designers should validate thermal behaviour in fully sealed enclosures where convection is limited.
Common pitfalls with XMC4500 include: (1) forgetting that VDDP must be present for any GPIO to operate, even when the core is held in standby; (2) failing to configure the boot mode pins before reset release, which can lock the device into an unexpected boot mode; (3) using the wrong CAN transceiver voltage class (XMC4500 CAN I/O is 3.3V); (4) neglecting to enable the peripheral clock before accessing peripheral registers, which causes silent bus faults. Always refer to the Infineon reference manual register descriptions.
For 100 Mbps Ethernet via MII, route TX_CLK, RX_CLK, TXD[3:0], RXD[3:0], TX_EN, RX_ER, CRS_DV as 50-ohm single-ended traces to a length-matched bus within 50 mm of the RJ45 magnetics. For RMII, route the 50 MHz reference clock with strict length matching to all RMII signals. Place the Ethernet PHY's 25 MHz crystal close to the PHY and provide a clean, isolated ground reference. Do not share switching power-supply grounds with the Ethernet PHY grounds.
Informações de conformidade
RoHS compliant per Infineon product page. Not AEC-Q100 qualified - for automotive applications consider XMC4400 or AURIX series. Industrial-grade temperature range -40C to +85C confirmed by F-grade ordering designation.
