XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon
Référence : XMC4500F144F768ACXQMA1 ✓ ActifXMC4500F144F768ACXQMA1 Présentation
An industrial microcontroller is a semiconductor designed for embedded control systems that must monitor inputs, execute control algorithms, and manage communications in real time. The XMC4500 family combines an Arm Cortex-M4 processor core with configurable peripherals, analog-to-digital conversion, and communication interfaces. This hierarchy places the device between a general-purpose microcontroller and a highly integrated industrial control platform.
The XMC4500F144F768ACXQMA1 provides 768 KB of flash for firmware and 160 KB of SRAM for working memory. Its Cortex-M4 architecture supports 32-bit processing at up to 120 MHz, while the peripheral set includes CAN and LIN networking, Ethernet connectivity, mixed-signal acquisition, and timer/PWM control functions. The extended industrial temperature range of -40°C to +85°C supports operation across commercial and industrial environments.
A 144-pin LQFP exposes the device's extensive analog, digital, communications, timer, and debug resources while retaining a surface-mount assembly format. The XMC4500 platform uses a configurable peripheral approach, allowing software developers to organize communication, timing, and acquisition functions around the requirements of a specific machine or controller. Pin assignment, alternate functions, and peripheral routing must be confirmed in the pin-description tables of the manufacturer datasheet.
Typical applications include industrial Ethernet controllers, CAN and LIN network gateways, motor-control and timer/PWM platforms, programmable automation equipment, sensor-acquisition systems, and embedded factory communication nodes. The combination of 120 MHz processing, 768 KB of flash, and mixed-signal acquisition makes the device suitable for controls that require both communications bandwidth and deterministic peripheral operation.
PCB design should provide a complete low-frequency decoupling network, clean grounding for analog inputs, and careful signal-integrity routing for Ethernet and other communications. Firmware should configure pins, clocks, analog channels, and communication objects explicitly because the XMC4500 uses flexible peripheral multiplexing. The 144-pin package also requires adequate copper area and a thermal-aware layout to support reliable operation near the upper temperature limit.
This page organizes the core MCU specifications, practical application fit, comparison points, and design guidance around the XMC4500F144F768ACXQMA1. It also identifies where pin-level and production-qualification decisions require confirmation against the current Infineon datasheet and errata.
Alternatives de remplacement direct pour XMC4500F144F768ACXQMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XMC4500F144F768ACXQMA1 (même facteur de forme et même empreinte) — différant par Flash Memory, Package, Product Type, SRAM.
XMC4500-F144F768-AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4504F144K512ACXQMA1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XMC4500F144F768ACXQMA1 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Word Size | 32 bit |
| Flash Memory | 768 KB |
| Flash Organization | 768K x 8 bit |
| SRAM | 160 KB |
| Ethernet Support | Yes |
| CAN Support | Yes |
| LIN Support | Yes |
| Mixed-Signal Acquisition | Yes |
| Timer and PWM Control | Yes |
| Plage de température de fonctionnement | -40°C to +85°C |
| Boîtier | PG-LQFP-144-13, 144 pins |
| Package Type | LQFP surface-mount package |
| Shipping Package | Tray |
Guide de configuration des broches du XMC4500F144F768ACXQMA1 tray
Configuration des broches du XMC4500F144F768ACXQMA1 (boîtier tray). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XMC4500F144F768ACXQMA1.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XMC4500F144F768ACXQMA1 convient pour 6 applications: Industrial Ethernet Control, CAN and LIN Network Gateway, Motor and PWM Control, Sensor Acquisition Node, Programmable Automation Controller, Machine Communication Controller.
Industrial Ethernet Control
The XMC4500F144F768ACXQMA1 fits an industrial Ethernet controller that must combine network processing with real-time machine functions. Its 120 MHz Arm Cortex-M4 core provides dedicated execution capacity, while 768 KB of flash accommodates Ethernet stacks, control logic, diagnostics, and field-upgrade capability. The 160 KB of SRAM supports protocol buffers and application state without relying entirely on external memory. Its Ethernet, CAN, and LIN resources also allow the same controller to bridge higher- and lower-level industrial networks. The design should isolate external network interfaces as required and follow the manufacturer reference schematic for PHY connectivity, clocking, and decoupling.
Recommandé
CAN and LIN Network Gateway
The XMC4500F144F768ACXQMA1 is well suited to a CAN-to-LIN gateway because it combines CAN and LIN networking with a 120 MHz Cortex-M4 core and 768 KB of flash. Protocol conversion, diagnostic handling, message routing, and local control can run on one MCU, reducing the need for separate communication processors. Its 160 KB of SRAM provides working space for queues and packet buffers, while timer/PWM resources can support auxiliary machine functions. Firmware designers should assign communication peripherals and pins explicitly, validate bus timing under worst-case interrupt load, and include isolation or protection appropriate to the physical network.
Recommandé
Motor and PWM Control
The XMC4500F144F768ACXQMA1 can serve as the central controller in a timer- and PWM-intensive motor-control platform. A 120 MHz Cortex-M4 core supports control-loop calculation and supervisory logic, while the dedicated timer/PWM resources generate deterministic command signals. The 768 KB of flash accommodates motor algorithms, field data, and diagnostics, and the 160 KB of SRAM supports state variables and data buffers. Mixed-signal acquisition can also monitor process or machine conditions. Correct implementation requires checking the exact timer channels, ADC channels, alternate functions, and interrupt routing in the datasheet because peripheral multiplexing is configurable.
Recommandé
Sensor Acquisition Node
The XMC4500F144F768ACXQMA1 is appropriate for a local sensor-acquisition node that must sample mixed signals, perform filtering, and publish results over an industrial network. Its mixed-signal acquisition resources reduce the need for a separate analog front-end controller, while the 120 MHz Cortex-M4 core can execute calibration, filtering, and protocol tasks. With 768 KB of flash and 160 KB of SRAM, the device has room for substantial local firmware and sample buffering. Analog layout remains critical: keep sensitive inputs away from digital and switching nets, provide local reference and bypass components as directed by the datasheet, and verify acquisition timing against the configured clock tree.
Recommandé
Programmable Automation Controller
The XMC4500F144F768ACXQMA1 supports programmable factory-automation controllers that coordinate communications, timing, and mixed-signal I/O. Its 768 KB of flash is suitable for sequencing logic, device drivers, diagnostics, and configuration data, while the 120 MHz core handles multitasking and protocol processing. Ethernet, CAN, and LIN provide multiple levels of plant connectivity, and the configurable peripheral architecture lets one design cover several controller variants. Firmware should define a clear resource-allocation plan for timers, communication channels, and analog inputs, and the PCB should expose test points and recovery interfaces consistent with maintainable industrial equipment.
Recommandé
Machine Communication Controller
The XMC4500F144F768ACXQMA1 can act as a machine communication controller that aggregates fieldbus traffic and coordinates machine-level I/O. Its Cortex-M4 processing capability is sufficient for protocol stacks and supervisory routines, and its 768 KB of flash supports multiple communication stacks and diagnostic services. Ethernet provides higher-bandwidth connectivity, while CAN and LIN support lower-level device networks. Timers and mixed-signal acquisition broaden the controller's role beyond message routing. Deployment should include watchdog handling, deterministic interrupt design, secure firmware-update planning, and network protection appropriate to the equipment's safety and environmental requirements.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC4500F144F768ACXQMA1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XMC4500-F144F768-AC | XMC4504F144K512ACXQMA1 |
|---|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-13, 144 pins | PG-LQFP-144-13, 144 pins | LQFP-144, 144 pins |
| Flash Memory | 768 KB | 768 KB | 512 KB |
Principaux différenciateurs
- Higher flash capacity within the identified 144-pin XMC comparison (vs XMC4504F144K512ACXQMA1)
- Exact full ordering-code identification (vs XMC4500-F144F768-AC)
- Integrated industrial networking and acquisition (vs XMC4500-F144F768-AC)
Notes de conception
Assign every power, ground, analog, communication, timer, and debug signal from the manufacturer pin-description table before routing. The XMC4500F144F768ACXQMA1 uses a 144-pin LQFP, so fine-pitch escape routing requires careful planning between the device and supporting components. Place decoupling and bulk-capacitor networks close to the relevant supply pins, preserve the intended ground-plane topology, and route high-current or sensitive analog nets independently from communications and switching signals.
Treat Ethernet, CAN, LIN, and timer/PWM routes as separate signal classes during layout. Keep clocks away from analog inputs, maintain continuous reference planes beneath high-speed routes, and minimize stubs and unnecessary layer transitions. Follow the manufacturer reference schematic and interface guidance for termination, biasing, isolation, and connector protection. Because the peripheral configuration is flexible, freeze the pin assignment early so alternate-function routing does not force late board changes.
Do not treat family-level XMC4500 information as an exact ordering-code guarantee without checking the derivative table. XMC4500F144F768ACXQMA1 is identified as an industrial, 120 MHz, 768 KB-flash device with Ethernet, CAN, LIN, mixed-signal acquisition, and timer/PWM functions. Verify supply voltages, temperature grade, package, interface availability, and exposed-pad requirements in the manufacturer datasheet before schematic release or firmware configuration.
Informations de conformité
The device is identified as an industrial microcontroller, but no RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement appears in the cited product information. Confirm environmental and automotive qualifications with the manufacturer before using those claims in a controlled procurement or design process.