XMC4504F144K512ACXQMA1 - 120MHz Cortex-M4 512KB MCU | Infineon
MPN: XMC4504F144K512ACXQMA1 ✓ ActiveXMC4504F144K512ACXQMA1 Overview
An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. It belongs to the Arm Cortex-M family and provides integrated flash memory, SRAM, communication peripherals, timers, and interrupt-control hardware in one device. The XMC4504F144K512ACXQMA1 extends this architecture into the Infineon XMC4500 family for industrial applications that require real-time control and Ethernet connectivity.
The principal device characteristics include a 120 MHz maximum clock, 512 KB of flash, 128 KB of SRAM, and a single processor core. Its 1.3 V and 3.3 V supply descriptions correspond to embedded core and I/O operating domains. The 144-lead PG-LQFP package provides ample I/O capacity for external memory interfaces, communications, analog inputs, timers, and industrial control signals while supporting surface-mount assembly.
The XMC4500 architecture integrates Ethernet MAC functionality with a configurable peripheral set, allowing designers to tailor the controller to specific application requirements. Peripheral functionality and pin multiplexing should be configured together because the available pins and alternate functions depend on the selected operating mode. Firmware development uses the Arm Cortex-M4 programming model, with startup, linker, and device-support files required for the specific Infineon part and package.
Typical applications include industrial Ethernet controllers, factory automation equipment, networked sensors, industrial gateways, motor-control systems, and embedded automation platforms. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet MAC support makes the device appropriate for control nodes that must execute application firmware while communicating over an industrial Ethernet network.
When assigning the package pins, consult the manufacturer pin-description table for the exact PG-LQFP-144-18 pinout. In particular, verify the functions of communication, debug, analog, reset, clock, and power pins before finalizing PCB routing. Proper decoupling, exposed-pad thermal design, and signal-integrity practices remain essential for reliable industrial operation.
This page combines the manufacturer product identity, distributor specification details, same-family drop-in candidates, application guidance, and design-focused comparisons. These engineering references help engineers assess package reuse, peripheral compatibility, firmware prerequisites, and sourcing requirements before committing the XMC4504F144K512ACXQMA1 to an industrial embedded design.
Drop-in alternatives for XMC4504F144K512ACXQMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XMC4504F144K512ACXQMA1 (same form factor and footprint) — differing in Flash Memory, Package, Product Type, SRAM.
XMC4504F100K512ACXQMA1
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XMC4504F144F512ACXQMA1
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XMC4504F100F512ACXQMA1
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC4504F144K256ACXQMA1
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XMC4500F144F768ACXQMA1
✅ Drop-InContact for price
View Datasheet →XMC4504F144K512ACXQMA1 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Core Count | 1 |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Ethernet | Ethernet MAC |
| Core Supply Voltage | 1.3 V |
| I/O Supply Voltage | 3.3 V |
| Specified Operating Voltage Range | 3.13 V to 3.63 V |
| Package | PG-LQFP-144-18 |
| Package Dimensions | 20 mm x 20 mm |
| Pin Count | 144 pins |
| Mounting Type | Surface Mount |
| Shipping Format | Tray |
| Application Segment | Industrial |
| RoHS Status | Compliant |
| Programming Model | Arm Cortex-M4 |
| Product Family | XMC4000 |
XMC4504F144K512ACXQMA1 20 mm x 20 mm Pin Configuration Guide
Pin configuration for XMC4504F144K512ACXQMA1 (20 mm x 20 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XMC4504F144K512ACXQMA1.
Refer to the datasheet for full pin configuration.
Typical Applications
XMC4504F144K512ACXQMA1 is suitable for 6 applications: Industrial Ethernet Gateway, Factory Automation Controller, Networked Sensor Controller, Motor Control and Monitoring, Industrial Communication Concentrator, Embedded Automation Platform.
Industrial Ethernet Gateway
The XMC4504F144K512ACXQMA1 fits an industrial Ethernet gateway because it combines a 120 MHz Arm Cortex-M4 core with an integrated Ethernet MAC. It can execute protocol conversion, local control, data conditioning, and supervisory tasks without relying on an external network controller. Its 512 KB flash supports a larger embedded application than many basic communication controllers, while 128 KB SRAM accommodates active protocol buffers. The PG-LQFP-144-18 package also offers substantial pin availability for status indicators, serial interfaces, digital inputs, and industrial I/O.
Recommended
Factory Automation Controller
For factory automation, the XMC4504F144K512ACXQMA1 provides the real-time processing capacity required for sequencing machinery and coordinating distributed automation tasks. Its 120 MHz Cortex-M4 processor can execute control algorithms while configurable peripherals support timers, communications, and digital functions. The 512 KB flash capacity accommodates control code, configuration data, and diagnostics, while the large 144-pin package helps expose signals needed by a multi-axis or multi-IO control module.
Recommended
Networked Sensor Controller
The XMC4504F144K512ACXQMA1 is suitable for a networked sensor controller that must acquire process data, run local filtering, and report results through Ethernet. Its 120 MHz processor supports responsive task scheduling without offloading all control work to the network interface, and its Ethernet MAC reduces the need for a separate Ethernet controller. The 512 KB flash provides room for protocol stacks and application firmware, while 128 KB SRAM supports active sampling, packet, and configuration buffers.
Recommended
Motor Control and Monitoring
The XMC4504F144K512ACXQMA1 can serve as the supervisory controller in an industrial motor-drive system. A 120 MHz Cortex-M4 core can execute speed-reference logic, state monitoring, fault handling, and communication tasks while dedicated timers and I/O interact with the power stage. The 144-pin PG-LQFP package provides a useful mix of control and monitoring connections, and the 512 KB flash allows concurrent motor-control, diagnostics, and field-update firmware.
Recommended
Industrial Communication Concentrator
A communication concentrator benefits from the XMC4504F144K512ACXQMA1's combination of Ethernet MAC support and a 120 MHz processing core. The microcontroller can aggregate local sensor data, manage protocol conversion, and expose diagnostics over a shared industrial network. Its 512 KB flash and 128 KB SRAM provide usable storage for firmware and active communication buffers. The 3.3 V I/O domain also supports integration with conventional industrial digital interfaces when their levels and timing are compatible.
Recommended
Embedded Automation Platform
The XMC4504F144K512ACXQMA1 is appropriate for an embedded automation platform that combines network communication with deterministic local control. Its single 32-bit Cortex-M4 core provides predictable instruction execution at up to 120 MHz, while the configurable peripheral set lets designers tailor timer, serial, and I/O resources to the machine. The 512 KB flash accommodates application layers, and the 144-pin package offers a broad pin budget for sensors, actuators, service interfaces, and expansion buses.
Recommended
Recommended Products Summary
Engineering reference data for XMC4504F144K512ACXQMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XMC4504F100K512ACXQMA1 | XMC4504F144F512ACXQMA1 | XMC4504F100F512ACXQMA1 | XMC4504F144K256ACXQMA1 | XMC4500F144F768ACXQMA1 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 | PG-LQFP-144-18 |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB | 768 KB |
| Application Class | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
Key Differentiators
- Larger 144-pin interface allocation in the target selection (vs XMC4504F100K512ACXQMA1)
- Memory density is exactly matched (vs XMC4504F144K256ACXQMA1)
- Lower flash usage than a higher-memory XMC option (vs XMC4500F144F768ACXQMA1)
- Same 120 MHz Cortex-M4 performance class (vs XMC4504F100F512ACXQMA1)
Design Notes
Assign all PG-LQFP-144-18 signals from the manufacturer pin-description table, including alternate functions, before routing the PCB. Keep the 1.3 V core and 3.3 V I/O supply networks distinct until their point of connection, and place local bypass capacitors close to the corresponding power pins. Ethernet differential pairs should follow a continuous reference plane with minimized stubs and via transitions.
Design the supply rails for separate core and I/O requirements of 1.3 V and 3.3 V, respectively. Use the manufacturer electrical-characteristics tables for current limits, sequencing, startup, and load-transient expectations. Confirm that upstream regulators can accommodate the combined core and I/O demand at 120 MHz and that voltage tolerances remain within the 3.13 V to 3.63 V operating range.
Although the PG-LQFP-144-18 package provides a large number of leads, thermal performance depends on the PCB copper and airflow rather than lead count alone. Connect the exposed thermal pad to the required ground plane with the manufacturer-recommended via pattern and keep thermal copper away from sensitive signal-routing areas. Validate junction temperature at the highest expected ambient temperature and operating frequency.
Do not substitute the MCU solely because another XMC part has a similar flash capacity or operating frequency. Compare the exact pin names, alternate-function multiplexing, clock requirements, peripheral set, device headers, startup code, and memory map. A same-family footprint match is necessary for PCB reuse, while successful software migration still requires recompilation and hardware validation.
Compliance Information
The LCSC product record identifies the exact MPN as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is stated.