XMC4504F144F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
Référence : XMC4504F144F512ABXQMA1 ✗ Fin de vieXMC4504F144F512ABXQMA1 Présentation
A microcontroller is a compact integrated circuit containing a processor core, program memory, data memory, peripherals, and communication interfaces. The XMC4000 family combines an ARM Cortex-M4 core with Infineon automotive and industrial embedded-control capabilities. This MCU is positioned for applications that need more processing performance and connectivity than a small 8-bit or 16-bit controller, while retaining a broad set of timers, serial interfaces, analog functions, and communication peripherals for system integration.
The XMC4504F144F512ABXQMA1 operates at up to 120 MHz and includes 512 KB of flash memory. Its 32-bit architecture supports efficient control-loop execution, protocol handling, and signal-processing tasks. The Ethernet MAC provides a practical foundation for industrial Ethernet designs, while the extensive peripheral set can reduce the number of external components needed for sensor acquisition, actuator control, communications, and system monitoring. The PG-LQFP-144-18 package provides a high pin count for parallel I/O, analog functions, and multiple communication channels.
Typical applications include industrial Ethernet equipment, factory automation controllers, building automation gateways, motor and power-control systems, communications infrastructure, and connected industrial sensors. The Cortex-M4 processing capability is useful for protocol stacks, state machines, data acquisition, and supervisory control. For designs requiring deterministic timing, the MCU can combine its high-frequency core with dedicated timer resources and event-driven peripherals instead of relying on a general-purpose host processor.
Designers should verify the complete pin assignment, peripheral multiplexing, clock configuration, memory map, and electrical limits in the manufacturer datasheet before laying out the PCB. The LQFP package also requires attention to thermal dissipation, especially when the core and communication peripherals operate continuously. Power sequencing, decoupling, debug access, and Ethernet interface implementation should be planned early because these functions can materially affect board-level reliability and compliance.
This product page summarizes the verified XMC4504F144F512ABXQMA1 identity and combines its principal MCU specifications with application guidance, comparison information, and practical design considerations. It is intended to help engineers identify the correct Infineon part, assess its 120 MHz Cortex-M4 and 512 KB flash configuration, and determine whether the XMC4504 platform is suitable for an industrial embedded-control design.
Alternatives de remplacement direct pour XMC4504F144F512ABXQMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
XMC4504-F144K512-AC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XMC4504F144F512ABXQMA1 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Series | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Largeur du bus de données | 32 bit |
| Fréquence d'horloge maximale | 120 MHz |
| Program Memory Size | 512 KB flash |
| Flash Organization | 512K x 8 |
| Boîtier | PG-LQFP-144-18 |
| Nombre de broches | 144 pins |
| Type de montage | Surface mount |
| Ethernet Support | Ethernet MAC |
| Application Classification | Industrial ARM Cortex-M4 microcontroller |
Guide de configuration des broches du XMC4504F144F512ABXQMA1 pg-lqfp-144-18
Configuration des broches du XMC4504F144F512ABXQMA1 (boîtier pg-lqfp-144-18). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XMC4504F144F512ABXQMA1.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XMC4504F144F512ABXQMA1 convient pour 6 applications: Industrial Ethernet Gateway, Factory Automation Controller, Building Automation Gateway, Condition Monitoring System, Industrial Communications Controller, Power and Motor Control Supervisor.
Industrial Ethernet Gateway
The XMC4504F144F512ABXQMA1 fits an industrial Ethernet gateway because its ARM Cortex-M4 core runs at up to 120 MHz while the XMC4504 platform includes an Ethernet MAC. The 512 KB of flash provides room for a network stack, configuration logic, diagnostics, and local control functions. The 144-pin package also exposes a broad peripheral set for serial uplinks, status indicators, digital inputs, and service interfaces. A practical design can place the MCU between an Ethernet physical layer and industrial field-bus transceivers, using the Cortex-M4 for protocol translation, local filtering, and supervisory control. Final Ethernet support, peripheral multiplexing, and timing behavior should be checked against the manufacturer datasheet.
Recommandé
Factory Automation Controller
The XMC4504F144F512ABXQMA1 is suitable for a factory automation controller that must coordinate multiple inputs, outputs, timers, and serial devices. Its 120 MHz 32-bit Cortex-M4 processor can execute control loops, state machines, diagnostics, and communications tasks while the 144-pin package provides many available I/O positions. The 512 KB flash capacity supports embedded application code and field-upgradeable firmware. Use the MCU as the supervisory controller for actuator modules, sensor concentrators, or machine subassemblies, with dedicated timing peripherals handling time-critical events. Required temperature rating, safety functions, analog accuracy, and peripheral availability must be confirmed against the exact ordering configuration.
Recommandé
Building Automation Gateway
The XMC4504F144F512ABXQMA1 can serve as the central controller in a building automation gateway because it combines a high-performance Cortex-M4 core, 512 KB flash, extensive I/O, and Ethernet MAC capability. The processor can supervise HVAC equipment, lighting controllers, access-control interfaces, and environmental sensors while scheduling communication and control tasks. Its large package simplifies implementations that need both network connectivity and numerous field-bus or serial connections. In a gateway design, keep Ethernet routing isolated from sensitive analog circuitry, provide proper transceiver support, and define fallback behavior for network loss. Exact low-power modes, operating limits, and peripheral assignments should be validated in the datasheet.
Recommandé
Condition Monitoring System
The XMC4504F144F512ABXQMA1 is well suited to an industrial condition-monitoring system that combines vibration or sensor acquisition with communications and local diagnostics. The 120 MHz Cortex-M4 core provides computational capacity for digital filtering, feature extraction, event detection, and communication framing, while the 512 KB flash supports firmware, algorithms, and event-handling code. The 144-pin package can accommodate multiple digital sensors, communication ports, and discrete control signals. Design the analog front end separately, isolate it from switching and Ethernet circuits, and confirm the MCU’s ADC and timer capabilities in the detailed datasheet before fixing the signal chain.
Recommandé
Industrial Communications Controller
The XMC4504F144F512ABXQMA1 is appropriate for an industrial communications controller that must bridge Ethernet with field-bus or local serial interfaces. The 32-bit Cortex-M4 core at up to 120 MHz can process frames, maintain protocol state, run diagnostics, and coordinate real-time I/O. With 512 KB of flash, firmware can include a communication stack, device database, diagnostics, and configuration management. The large 144-pin package offers more peripheral routing flexibility than a small controller, although Ethernet magnetics and transceiver circuitry remain external. Validate supported serial modes, DMA behavior, interrupt latency, and electrical isolation requirements before schematic freeze.
Recommandé
Power and Motor Control Supervisor
The XMC4504F144F512ABXQMA1 can act as a supervisory controller in power conversion or motor-control equipment. Its 120 MHz Cortex-M4 core supports fast control-state execution, protection sequencing, data logging, and communication, while the 144-pin package provides access to timers, control signals, and diagnostic I/O. The MCU can coordinate inverter or power-stage commands, monitor system status, and report faults to a higher-level system. The semiconductor power stage and high-current sensing circuitry remain separate, so isolation, grounding, and timing must be handled carefully. Confirm timer resolution, capture functions, analog interfaces, and the exact temperature grade in the manufacturer documentation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XMC4504F144F512ABXQMA1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XMC4504-F144K512-AC |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-18 | PG-LQFP-144-18 - verify exact ordering code |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Clock Frequency | 120 MHz | 120 MHz |
| Data Bus Width | 32 bit | 32 bit |
| Flash Memory | 512 KB | 512 kB |
| Ethernet MAC | Present | Present |
| Product Class | XMC4000 microcontroller | Industrial ARM Cortex-M4 microcontroller |
Principaux différenciateurs
- High-performance Cortex-M4 control with network integration (vs XMC4504-F144K512-AC)
- Substantial embedded flash for protocol and control firmware (vs XMC4504-F144K512-AC)
- High pin count supports multi-interface industrial equipment (vs XMC4504-F144K512-AC)
Notes de conception
Use the PG-LQFP-144-18 land pattern from the manufacturer package drawing and place decoupling capacitors close to the power and ground pins. Separate the Ethernet transceiver, magnetics, and digital communications routing from precision analog inputs to reduce coupling. Keep the 144-pin escape paths short enough for assembly inspection, and confirm exposed-pad, thermal-via, and soldering requirements directly from the package documentation before releasing the PCB files.
Plan the power tree around every voltage rail required by the MCU, Ethernet transceiver, memories, and external interfaces. Confirm supply tolerances, sequencing, reset behavior, and maximum ramp conditions from the manufacturer datasheet rather than deriving them from the 120 MHz headline specification. Use local bulk and high-frequency bypass capacitance with placement reviewed against the recommended application circuit. Do not power the Ethernet physical layer from a rail whose noise or transient behavior is acceptable only for logic loads.
The maximum clock frequency is not a thermal design target by itself. Estimate worst-case core and I/O dissipation from the actual operating mode, peripheral load, supply voltage, and ambient temperature, then verify junction temperature using the package thermal model. The LQFP construction generally benefits from board copper and through-hole thermal vias, but the exact land pattern and via arrangement must follow the manufacturer recommendations. Reduce clock or peripheral activity when the thermal budget cannot be maintained.
Do not substitute the related XMC4504-F144K512-AC ordering notation without reviewing the complete Infineon ordering table. Verify pin functions, peripheral multiplexing, clock limits, temperature grade, qualification, and software-device identifiers for the exact suffix. Also avoid assuming that identical flash capacity guarantees firmware compatibility, since startup code, bootloader assumptions, memory-map details, and peripheral configuration may differ between ordering configurations.
Informations de conformité
The verified excerpts do not state the target device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes from the current Infineon product page and the exact ordering documentation.