Infineon

XMC4504F144F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Référence : XMC4504F144F512ACXQMA1 ✓ Actif
1.3 V to 3.63 V Vdss PG-LQFP-144-10 Package 120 MHz Speed 512 KB flash (512K x 8) Memory
MOQ : 1 |

XMC4504F144F512ACXQMA1 Présentation

The Infineon XMC4504F144F512ACXQMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 512 KB of flash memory in a PG-LQFP-144-10 package. It combines an industrial microcontroller core with Ethernet connectivity and is identified as a 1.3 V or 3.3 V device for embedded control and connected industrial equipment.

An XMC4000-series microcontroller combines an Arm Cortex-M4 processor with industrial-oriented peripherals in a single system-on-chip. The Cortex-M4 architecture supports efficient interrupt-driven control, while the XMC4000 family is designed for automation, communications, and embedded networking systems that need deterministic real-time behavior alongside an Ethernet interface. This device therefore belongs to the industrial microcontroller hierarchy rather than the general-purpose consumer MCU category.

Principal characteristics include a 120 MHz CPU frequency, 512 KB of program flash, 32-bit processing, and an Ethernet MAC. The PG-LQFP-144-10 surface-mount package exposes 144 pins and is offered in a tray configuration. According to the Infineon product summary, the XMC4504-F144F512-AC industrial variant is designed around an operating voltage of 1.3 V to 3.63 V, making it suitable for low-voltage industrial boards designed around either 1.8 V or 3.3 V interfacing.

The 512 KB flash allocation provides room for a substantial bootloader, network stack, field-service routines, and application firmware within a single device. Ethernet support allows the controller to participate directly in industrial Ethernet networks without an external interface controller. Exact RAM capacity, peripheral mix, temperature limits, and Ethernet physical-layer requirements should be confirmed in the manufacturer datasheet before the part is committed to a new board.

Typical uses include industrial Ethernet gateways, programmable automation controllers, building automation equipment, motor and motion-control modules, and connected sensor-hub designs. Its 120 MHz processing headroom supports protocol handling alongside real-time control tasks, while the 144-pin LQFP package simplifies assembly for prototypes and moderate-production industrial boards compared with very fine-pitch BGA packages.

For PCB design, follow the Infineon reference layout, power-supply decoupling, and exposed pad or thermal-via guidance in the manufacturer datasheet. Validate the Ethernet PHY or magnetics arrangement, maintain defined supply sequencing, and confirm that the selected 1.3 V or 3.3 V operating point matches the internal core and I/O requirements of the complete design.

This page consolidates the verified manufacturer specifications, ordering information, package details, and practical engineering guidance for the XMC4504F144F512ACXQMA1. It also identifies a same-family ordering option and documents which parameters must still be confirmed against the manufacturer datasheet during hardware design review.

Alternatives de remplacement direct pour XMC4504F144F512ACXQMA1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

XMC4504-F144K512-AC

✅ Remplacement direct
📦 PG-LQFP-144-10
Core frequency, 512 KB flash, Ethernet MAC, and 144-pin LQFP format match exactly (0% difference in the listed values); the F versus K ordering qualifier changes the program-flash code

📋 Alternative de référence (hors catalogue)

XMC4504F144F512ACXQMA1 Valeurs maximales et caractéristiques électriques

Manufacturer Infineon Technologies
Product Family XMC4000 industrial microcontroller
CPU Core Arm Cortex-M4
CPU Architecture ARM 32-bit RISC
Maximum CPU Frequency 120 MHz
Program Memory 512 KB flash (512K x 8)
Operating Voltage Range 1.3 V to 3.63 V
Supply Configuration 1.3 V or 3.3 V
Ethernet Support Ethernet MAC
Boîtier PG-LQFP-144-10
Nombre de broches 144 pins
Type de montage Surface mount
Shipping Format Tray
Application Segment Industrial
Flash Programming Data 512K x 8

Guide de configuration des broches du XMC4504F144F512ACXQMA1 pg-lqfp-144-10

Configuration des broches du XMC4504F144F512ACXQMA1 (boîtier pg-lqfp-144-10). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier pg-lqfp-144-10 pour le XMC4504F144F512ACXQMA1

Aucune donnée de brochage détaillée disponible pour XMC4504F144F512ACXQMA1.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XMC4504F144F512ACXQMA1 convient pour 6 applications: Industrial Ethernet Gateway, Programmable Automation Controller, Building Automation and HVAC Controller, Motor and Motion-Control Module, Connected Sensor and Diagnostics Hub, Communication Gateway with Local Control.

🌐

Industrial Ethernet Gateway

The XMC4504F144F512ACXQMA1 fits an industrial Ethernet gateway because its 120 MHz Arm Cortex-M4 core can process protocol traffic while running supervisory control tasks, and the XMC4504-F144F512-AC device includes an Ethernet MAC. The 512 KB flash allocation can hold a gateway application, network stack, and secure update agent without requiring an external memory device. Use the 144-pin LQFP package when a manageable lead pitch is preferable to a fine-pitch BGA footprint. Confirm the external PHY, transformer, and connector implementation in the manufacturer reference design, and validate the Ethernet clock requirements and magnetic-component selection against the system specification.

🏭

Programmable Automation Controller

The XMC4504F144F512ACXQMA1 is appropriate for a programmable automation controller that combines fast I/O handling with an industrial communications interface. Its 120 MHz Cortex-M4 core provides processing margin for motion or machine-control tasks, while the Ethernet MAC supports connectivity to supervisory PLCs and plant networks. The 512 KB flash capacity is suitable for layered firmware containing a bootloader, control logic, diagnostics, and communication services. The PG-LQFP-144-10 package also exposes a comparatively high pin count for digital I/O, analog channels, and communications functions. Verify the exact peripheral allocation, pin multiplexing, and safety requirements in the Infineon datasheet before finalizing the control card.

🏠

Building Automation and HVAC Controller

The XMC4504F144F512ACXQMA1 suits building automation equipment that must combine real-time sensor monitoring with Ethernet-based supervisory communication. At 120 MHz, the Cortex-M4 core can handle multiple control loops, filtering, scheduling, and network tasks, and the 512 KB flash allows a substantial embedded application to be stored on-chip. The Ethernet MAC enables integration with building controllers and remote management systems. A 1.3 V to 3.63 V operating range supports low-voltage industrial board architectures, although exact core and I/O rail requirements must be confirmed for the ordering code. Use the manufacturer's pin and power guidance to plan decoupling, clock distribution, and analog input conditioning.

⚙️

Motor and Motion-Control Module

The XMC4504F144F512ACXQMA1 can serve as the central controller in a motor or motion-control module where deterministic execution and network connectivity are both required. The 120 MHz Cortex-M4 core provides processing capacity for current-control loops, position processing, and communication tasks, while the 144-pin LQFP package offers a substantial number of connections for control signals and external interfaces. Ethernet MAC support allows motion data to be exchanged with machine-level controllers. The 512 KB flash capacity accommodates real-time control code, parameter tables, and field-service logic. Confirm timer, PWM, analog-converter, and encoder-interface details in the manufacturer datasheet before assigning the pins or designing the power-conversion stage.

🧩

Connected Sensor and Diagnostics Hub

The XMC4504F144F512ACXQMA1 is useful in a connected sensor hub that gathers industrial measurements, performs local filtering, and forwards results over Ethernet. Its 120 MHz Cortex-M4 core can execute multiple acquisition tasks and communication routines, while 512 KB of flash provides room for calibration tables, device drivers, and diagnostic firmware. The Ethernet MAC enables direct participation in industrial networks, while the 144-pin package provides a generous interface count for digital sensors and analog channels. Use the manufacturer's memory and pin-assignment tables to avoid conflicts among high-speed communications, analog inputs, and debug functions, and validate the required operating-temperature grade for the deployment environment.

📡

Communication Gateway with Local Control

The XMC4504F144F512ACXQMA1 fits a communication gateway that must translate between industrial Ethernet traffic and embedded local control functions. The 120 MHz Cortex-M4 processor balances network-stack execution with real-time handling of relays, sensors, and operator inputs, and the Ethernet MAC provides the network-facing function. With 512 KB of flash, the device can consolidate protocol conversion, logging, configuration, and upgrade logic on one controller. Its PG-LQFP-144-10 package is also practical for equipment requiring a high pin count without adopting a fine-pitch BGA assembly process. Confirm PHY selection, isolation requirements, stack memory use, and watchdog behavior using the manufacturer datasheet and reference design.

Récapitulatif des produits recommandés

XMC4504-F144K512-AC Same-family 120 MHz Cortex-M4 controller with 512 KB flash Utilisé dans : Industrial Ethernet Gateway, Programmable Automation Controller, Building Automation and HVAC Controller, Motor and Motion-Control Module, Connected Sensor and Diagnostics Hub, Communication Gateway with Local Control XMC4504-F144F512-AC Base Infineon product designation for the target ordering code Utilisé dans : Industrial Ethernet Gateway, Programmable Automation Controller, Building Automation and HVAC Controller, Motor and Motion-Control Module, Connected Sensor and Diagnostics Hub, Communication Gateway with Local Control
What is the XMC4504F144F512ACXQMA1?
The XMC4504F144F512ACXQMA1 is an Infineon XMC4000-series 32-bit industrial microcontroller built around the Arm Cortex-M4 core. It runs at 120 MHz, provides 512 KB of flash memory, includes Ethernet MAC connectivity, and uses a PG-LQFP-144-10 package. The Infineon product summary identifies the XMC4504-F144F512-AC device as an industrial Cortex-M4 controller for connected automation and communications equipment.
What are the key specifications of XMC4504F144F512ACXQMA1?
The key specifications of the XMC4504F144F512ACXQMA1 are a 120 MHz Arm Cortex-M4 core, 512 KB of flash organized as 512K x 8, 32-bit processing, and Ethernet MAC support. The device is offered in a 144-pin PG-LQFP-144-10 surface-mount package with a 1.3 V to 3.63 V operating-voltage range. Confirm RAM, temperature grade, and detailed peripheral assignments in the manufacturer datasheet.
Where can I download the XMC4504F144F512ACXQMA1 datasheet?
The official XMC4504-F144F512-AC product page on infineon.com provides the device documentation and ordering information. The Octopart datasheet entry also links to available Infineon documents. Use the manufacturer PDF for the authoritative pin list, electrical characteristics, memory map, peripheral functions, and recommended PCB layout. The component-search tools identify a datasheet PDF associated with the 2016-01-20 publication date.
Where can I find the XMC4504F144F512ACXQMA1 pinout?
The XMC4504F144F512ACXQMA1 uses a 144-pin PG-LQFP-144-10 package, and its complete signal assignment must be taken from the Infineon pin-description table. The manufacturer datasheet provides the authoritative package drawing and pin names, including power, ground, analog, digital I/O, and Ethernet-related connections. Use that table when assigning PCB tracks rather than inferring peripheral functions from the device family name.
Is the XMC4504F144F512ACXQMA1 suitable for industrial Ethernet equipment?
Yes, the XMC4504F144F512ACXQMA1 is suitable for industrial Ethernet equipment because the XMC4504-F144F512-AC device includes an Ethernet MAC and a 120 MHz Arm Cortex-M4 core. It provides the processing bandwidth for protocol handling alongside real-time control. An external Ethernet PHY may still be required, so confirm the integrated-interface configuration and supported PHY modes in the manufacturer datasheet.
How much flash memory does the XMC4504F144F512ACXQMA1 have?
The XMC4504F144F512ACXQMA1 provides 512 KB of flash memory, organized as 512K x 8. That storage can hold an application, a network stack, a bootloader, and field-update logic in one controller. The Infineon product page and distributor listings both identify 512 KB as the programmed flash capacity for this ordering code.
What is the CPU frequency of the XMC4504F144F512ACXQMA1?
The CPU frequency of the XMC4504F144F512ACXQMA1 is 120 MHz. The Infineon product summary describes the XMC4504-F144F512-AC as an industrial Arm Cortex-M4 microcontroller with a 120 MHz CPU. This frequency gives designers additional headroom for Ethernet protocol processing, diagnostics, and control-loop computation compared with lower-frequency Cortex-M microcontrollers.
What is the difference between XMC4504F144F512ACXQMA1 and XMC4504-F144K512-AC?
The XMC4504-F144K512-AC and XMC4504F144F512ACXQMA1 are closely related XMC4504 industrial options: both are described as 120 MHz Arm Cortex-M4 controllers with 512 KB of flash and Ethernet MAC support. The ordering codes use different flash qualifiers, F versus K. Confirm the exact flash-programming, temperature, and lifecycle details for each ordering code against the Infineon product summary before substituting them.
Can XMC4504-F144K512-AC replace XMC4504F144F512ACXQMA1?
The XMC4504-F144K512-AC is a candidate same-family alternative because it shares the 120 MHz Cortex-M4 core, 512 KB flash capacity, Ethernet MAC function, and 144-pin LQFP format shown in the Infineon listings. However, the F and K ordering qualifiers can encode different program-flash or temperature characteristics. Verify the datasheet ordering table, pinout, and device configuration registers before treating it as a drop-in replacement.
What is the best drop-in replacement for XMC4504F144F512ACXQMA1?
The best verified same-family starting point is the Infineon XMC4504-F144K512-AC, which matches the 120 MHz Cortex-M4 core, 512 KB flash, Ethernet MAC, and 144-pin LQFP format. Treat it as a qualified candidate rather than an automatic substitution because flash and temperature qualifiers may differ. Request a quote on this page for availability, and validate the complete ordering configuration with Infineon.
Is XMC4504F144F512ACXQMA1 the same as XMC4504-F144F512-AC?
The Infineon product page uses XMC4504-F144F512-AC as the base product identifier, while XMC4504F144F512ACXQMA1 is the full ordering code used by distributors. The verified descriptions match on 120 MHz Cortex-M4 performance, 512 KB flash, Ethernet MAC, industrial positioning, and the 144-pin LQFP package. Use the full suffix when ordering because it also identifies packing and qualification options.
When should I choose XMC4504F144F512ACXQMA1 over a lower-pin-count MCU?
Choose the XMC4504F144F512ACXQMA1 when a design needs substantial on-chip flash, integrated Ethernet MAC capability, and a relatively high I/O count in a 144-pin LQFP package. The 120 MHz Cortex-M4 core also suits simultaneous protocol and real-time control workloads. A lower-pin-count MCU can simplify layout when Ethernet, storage, and expansion I/O are not required.
Is XMC4504F144F512ACXQMA1 suitable for a 3.3 V industrial control board?
The XMC4504F144F512ACXQMA1 is suitable for a 3.3 V industrial board because the manufacturer listing identifies 1.3 V and 3.3 V supply options, with an operating range of 1.3 V to 3.63 V. Confirm which internal supply configuration applies to the exact ordering code and whether the Ethernet interface needs a separate 1.2 V or 2.5 V PHY rail.
Where can I buy XMC4504F144F512ACXQMA1 online?
Use the Request a Quote form on this page to ask for XMC4504F144F512ACXQMA1 pricing, stock confirmation, minimum order quantity, and lead time. The manufacturer identifies the XMC4504-F144F512-AC as an industrial product, while distributor listings confirm broad catalog coverage. The platform refreshes commercial information from structured listings, so request a current quote rather than relying on a static price.
How much does XMC4504F144F512ACXQMA1 cost?
The current commercial terms for the XMC4504F144F512ACXQMA1 are obtained through the Request a Quote form on this page. Pricing depends on quantity, package format, sourcing condition, and current supplier availability. Use the quote form for a transaction-ready response and for confirmation of minimum order quantity, scheduled delivery, and any volume breaks.
What is the lead time and stock status for XMC4504F144F512ACXQMA1?
Request the current lead time and stock position for XMC4504F144F512ACXQMA1 through the Request a Quote form on this page. Catalog presence confirms that the part is actively listed, but a specific quantity and ship date should be confirmed for your order. Include the target quantity, tray packaging requirement, and required delivery date with the request.

Données de référence d'ingénierie pour XMC4504F144F512ACXQMA1 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Select the XMC4504F144F512ACXQMA1 when an industrial design needs a 120 MHz Arm Cortex-M4 core, 512 KB of flash, Ethernet MAC connectivity, and a 144-pin LQFP interface count. It is a strong fit for Ethernet gateways, automation controllers, building equipment, and connected diagnostics where real-time control and network handling coexist. Consider the XMC4504-F144K512-AC when it is available and its program-flash, temperature, and qualification requirements match the design; the two options share the principal CPU, memory-capacity, Ethernet, and package characteristics. A lower-pin-count microcontroller may simplify a board that needs neither Ethernet nor substantial firmware storage, while a different family may be necessary if the required peripherals, toolchain, or long-term supply program differ. Treat the XQMA1 suffix as part of the complete ordering identity and confirm every option against the Infineon ordering table before releasing a design.

Comparaison avec les alternatives

Paramètre Ce produit XMC4504-F144K512-AC
Manufacturer Infineon Technologies Infineon Technologies
Brand Infineon Infineon
Package PG-LQFP-144-10 144-pin LQFP
CPU Core Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz
Program Flash 512 KB (512K x 8) 512 KB
Ethernet Ethernet MAC Ethernet MAC
Ordering Qualifier F flash qualifier with XQMA1 ordering code K flash qualifier

Principaux différenciateurs

  • Verified same-family option with matching core and memory capacity (vs XMC4504-F144K512-AC)
  • High pin count for industrial control and communications (vs XMC4504-F144K512-AC)
  • Industrial voltage range supports low-voltage board architectures (vs XMC4504-F144K512-AC)

Notes de conception

The operating range of 1.3 V to 3.63 V includes the listed 1.3 V and 3.3 V configurations, but the internal rails must not be assumed to be interchangeable. Check the Infineon datasheet ordering table for the exact core and I/O supply arrangement, then place local decoupling close to each supply pin according to the manufacturer layout. Validate startup sequencing and any external regulator tolerances against the device requirements before power-up testing.

Use the PG-LQFP-144-10 footprint from the manufacturer package drawing and follow its recommended land pattern, including the stated board-finish allowances. Provide short, direct return paths for every ground pin and route sensitive analog and communication signals away from switching nodes. Because Ethernet and high-speed digital functions coexist on this device, separate noisy power paths from sensitive signal routing and maintain the clearances specified in the reference design.

Do not assume that the XMC4504-F144K512-AC is automatically interchangeable with the target merely because both are listed as 120 MHz, 512 KB XMC4504 devices. The F and K program-flash qualifiers may change supported programming or update characteristics, and the complete ordering code also identifies package and qualification options. Compare the ordering tables, temperature grades, pin functions, and configuration requirements in the manufacturer documentation before substitution.

Plan the Ethernet interface as a controlled-impedance section rather than treating the digital MAC signals as ordinary low-speed logic. Confirm the required PHY mode, reference clocks, termination, isolation, and magnetics arrangement with the Infineon reference design. Keep the Ethernet interface away from switching power-supply inductors and preserve the recommended return-path continuity beneath the interface area.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The device is identified as an industrial Infineon microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations must be checked on the manufacturer product page or material declaration for the exact ordering code.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

XMC4504F144F512ACXQMA1 datasheet XMC4504F144F512ACXQMA1 pinout XMC4504F144F512ACXQMA1 datasheet pdf XMC4504F144F512ACXQMA1 equivalent XMC4504F144F512ACXQMA1 replacement XMC4504F144F512ACXQMA1 price XMC4504F144F512ACXQMA1 stock XMC4504-F144F512-AC specifications XMC4504-F144K512-AC vs XMC4504-F144F512-AC Infineon XMC4504F144F512ACXQMA1 XMC4504 120MHz Cortex-M4 microcontroller XMC4504 512KB Ethernet LQFP-144 XMC4504 industrial Ethernet gateway MCU XMC4504 LQFP-144 footprint

Composants & termes associés

Infineon Infineon Technologies XMC4504F144F512ACXQMA1 XMC4504-F144F512-AC XMC4504-F144K512-AC XMC4000 XMC4504 Arm Cortex-M4 ARM 32-bit RISC industrial microcontroller system-on-chip Ethernet MAC Ethernet 120 MHz 512 KB flash 1.3 V 3.3 V PG-LQFP-144-10 LQFP surface mount industrial automation building automation motor control connected sensor hub
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ