XMC4504F144F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4504F144F512ACXQMA1 ✓ Hoạt độngXMC4504F144F512ACXQMA1 Tóm tắt
An XMC4000-series microcontroller combines an Arm Cortex-M4 processor with industrial-oriented peripherals in a single system-on-chip. The Cortex-M4 architecture supports efficient interrupt-driven control, while the XMC4000 family is designed for automation, communications, and embedded networking systems that need deterministic real-time behavior alongside an Ethernet interface. This device therefore belongs to the industrial microcontroller hierarchy rather than the general-purpose consumer MCU category.
Principal characteristics include a 120 MHz CPU frequency, 512 KB of program flash, 32-bit processing, and an Ethernet MAC. The PG-LQFP-144-10 surface-mount package exposes 144 pins and is offered in a tray configuration. According to the Infineon product summary, the XMC4504-F144F512-AC industrial variant is designed around an operating voltage of 1.3 V to 3.63 V, making it suitable for low-voltage industrial boards designed around either 1.8 V or 3.3 V interfacing.
The 512 KB flash allocation provides room for a substantial bootloader, network stack, field-service routines, and application firmware within a single device. Ethernet support allows the controller to participate directly in industrial Ethernet networks without an external interface controller. Exact RAM capacity, peripheral mix, temperature limits, and Ethernet physical-layer requirements should be confirmed in the manufacturer datasheet before the part is committed to a new board.
Typical uses include industrial Ethernet gateways, programmable automation controllers, building automation equipment, motor and motion-control modules, and connected sensor-hub designs. Its 120 MHz processing headroom supports protocol handling alongside real-time control tasks, while the 144-pin LQFP package simplifies assembly for prototypes and moderate-production industrial boards compared with very fine-pitch BGA packages.
For PCB design, follow the Infineon reference layout, power-supply decoupling, and exposed pad or thermal-via guidance in the manufacturer datasheet. Validate the Ethernet PHY or magnetics arrangement, maintain defined supply sequencing, and confirm that the selected 1.3 V or 3.3 V operating point matches the internal core and I/O requirements of the complete design.
This page consolidates the verified manufacturer specifications, ordering information, package details, and practical engineering guidance for the XMC4504F144F512ACXQMA1. It also identifies a same-family ordering option and documents which parameters must still be confirmed against the manufacturer datasheet during hardware design review.
Bộ thay thế dễ dàng lắp đặt cho XMC4504F144F512ACXQMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XMC4504-F144K512-AC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XMC4504F144F512ACXQMA1 Tỷ lệ tối đa & tính chất điện
| Manufacturer | Infineon Technologies |
| Product Family | XMC4000 industrial microcontroller |
| CPU Core | Arm Cortex-M4 |
| CPU Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Program Memory | 512 KB flash (512K x 8) |
| Operating Voltage Range | 1.3 V to 3.63 V |
| Supply Configuration | 1.3 V or 3.3 V |
| Ethernet Support | Ethernet MAC |
| Hộp | PG-LQFP-144-10 |
| Số chân | 144 pins |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tray |
| Application Segment | Industrial |
| Flash Programming Data | 512K x 8 |
Hướng dẫn cấu hình chân XMC4504F144F512ACXQMA1 pg-lqfp-144-10
Cấu hình chân cho XMC4504F144F512ACXQMA1 (pg-lqfp-144-10 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XMC4504F144F512ACXQMA1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XMC4504F144F512ACXQMA1 phù hợp cho 6 Áp dụngs: Industrial Ethernet Gateway, Programmable Automation Controller, Building Automation and HVAC Controller, Motor and Motion-Control Module, Connected Sensor and Diagnostics Hub, Communication Gateway with Local Control.
Industrial Ethernet Gateway
The XMC4504F144F512ACXQMA1 fits an industrial Ethernet gateway because its 120 MHz Arm Cortex-M4 core can process protocol traffic while running supervisory control tasks, and the XMC4504-F144F512-AC device includes an Ethernet MAC. The 512 KB flash allocation can hold a gateway application, network stack, and secure update agent without requiring an external memory device. Use the 144-pin LQFP package when a manageable lead pitch is preferable to a fine-pitch BGA footprint. Confirm the external PHY, transformer, and connector implementation in the manufacturer reference design, and validate the Ethernet clock requirements and magnetic-component selection against the system specification.
Được đề xuất
Programmable Automation Controller
The XMC4504F144F512ACXQMA1 is appropriate for a programmable automation controller that combines fast I/O handling with an industrial communications interface. Its 120 MHz Cortex-M4 core provides processing margin for motion or machine-control tasks, while the Ethernet MAC supports connectivity to supervisory PLCs and plant networks. The 512 KB flash capacity is suitable for layered firmware containing a bootloader, control logic, diagnostics, and communication services. The PG-LQFP-144-10 package also exposes a comparatively high pin count for digital I/O, analog channels, and communications functions. Verify the exact peripheral allocation, pin multiplexing, and safety requirements in the Infineon datasheet before finalizing the control card.
Được đề xuất
Building Automation and HVAC Controller
The XMC4504F144F512ACXQMA1 suits building automation equipment that must combine real-time sensor monitoring with Ethernet-based supervisory communication. At 120 MHz, the Cortex-M4 core can handle multiple control loops, filtering, scheduling, and network tasks, and the 512 KB flash allows a substantial embedded application to be stored on-chip. The Ethernet MAC enables integration with building controllers and remote management systems. A 1.3 V to 3.63 V operating range supports low-voltage industrial board architectures, although exact core and I/O rail requirements must be confirmed for the ordering code. Use the manufacturer's pin and power guidance to plan decoupling, clock distribution, and analog input conditioning.
Được đề xuất
Motor and Motion-Control Module
The XMC4504F144F512ACXQMA1 can serve as the central controller in a motor or motion-control module where deterministic execution and network connectivity are both required. The 120 MHz Cortex-M4 core provides processing capacity for current-control loops, position processing, and communication tasks, while the 144-pin LQFP package offers a substantial number of connections for control signals and external interfaces. Ethernet MAC support allows motion data to be exchanged with machine-level controllers. The 512 KB flash capacity accommodates real-time control code, parameter tables, and field-service logic. Confirm timer, PWM, analog-converter, and encoder-interface details in the manufacturer datasheet before assigning the pins or designing the power-conversion stage.
Được đề xuất
Connected Sensor and Diagnostics Hub
The XMC4504F144F512ACXQMA1 is useful in a connected sensor hub that gathers industrial measurements, performs local filtering, and forwards results over Ethernet. Its 120 MHz Cortex-M4 core can execute multiple acquisition tasks and communication routines, while 512 KB of flash provides room for calibration tables, device drivers, and diagnostic firmware. The Ethernet MAC enables direct participation in industrial networks, while the 144-pin package provides a generous interface count for digital sensors and analog channels. Use the manufacturer's memory and pin-assignment tables to avoid conflicts among high-speed communications, analog inputs, and debug functions, and validate the required operating-temperature grade for the deployment environment.
Được đề xuất
Communication Gateway with Local Control
The XMC4504F144F512ACXQMA1 fits a communication gateway that must translate between industrial Ethernet traffic and embedded local control functions. The 120 MHz Cortex-M4 processor balances network-stack execution with real-time handling of relays, sensors, and operator inputs, and the Ethernet MAC provides the network-facing function. With 512 KB of flash, the device can consolidate protocol conversion, logging, configuration, and upgrade logic on one controller. Its PG-LQFP-144-10 package is also practical for equipment requiring a high pin count without adopting a fine-pitch BGA assembly process. Confirm PHY selection, isolation requirements, stack memory use, and watchdog behavior using the manufacturer datasheet and reference design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XMC4504F144F512ACXQMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XMC4504-F144K512-AC |
|---|---|---|
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Brand | Infineon | Infineon |
| Package | PG-LQFP-144-10 | 144-pin LQFP |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Flash | 512 KB (512K x 8) | 512 KB |
| Ethernet | Ethernet MAC | Ethernet MAC |
| Ordering Qualifier | F flash qualifier with XQMA1 ordering code | K flash qualifier |
Bảo phân biệt quan trọng
- Verified same-family option with matching core and memory capacity (vsXMC4504-F144K512-AC)
- High pin count for industrial control and communications (vsXMC4504-F144K512-AC)
- Industrial voltage range supports low-voltage board architectures (vsXMC4504-F144K512-AC)
Ghi chú thiết kế
The operating range of 1.3 V to 3.63 V includes the listed 1.3 V and 3.3 V configurations, but the internal rails must not be assumed to be interchangeable. Check the Infineon datasheet ordering table for the exact core and I/O supply arrangement, then place local decoupling close to each supply pin according to the manufacturer layout. Validate startup sequencing and any external regulator tolerances against the device requirements before power-up testing.
Use the PG-LQFP-144-10 footprint from the manufacturer package drawing and follow its recommended land pattern, including the stated board-finish allowances. Provide short, direct return paths for every ground pin and route sensitive analog and communication signals away from switching nodes. Because Ethernet and high-speed digital functions coexist on this device, separate noisy power paths from sensitive signal routing and maintain the clearances specified in the reference design.
Do not assume that the XMC4504-F144K512-AC is automatically interchangeable with the target merely because both are listed as 120 MHz, 512 KB XMC4504 devices. The F and K program-flash qualifiers may change supported programming or update characteristics, and the complete ordering code also identifies package and qualification options. Compare the ordering tables, temperature grades, pin functions, and configuration requirements in the manufacturer documentation before substitution.
Plan the Ethernet interface as a controlled-impedance section rather than treating the digital MAC signals as ordinary low-speed logic. Confirm the required PHY mode, reference clocks, termination, isolation, and magnetics arrangement with the Infineon reference design. Keep the Ethernet interface away from switching power-supply inductors and preserve the recommended return-path continuity beneath the interface area.
Thông tin tuân thủ
The device is identified as an industrial Infineon microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations must be checked on the manufacturer product page or material declaration for the exact ordering code.