Zilog

Z86E2204PSC - 8-Bit 8KB OTP CMOS Microcontroller | Zilog

Référence : Z86E2204PSC ✗ Fin de vie
40-pin DIP Package 8 KB OTP Memory
MOQ : 1 |

Z86E2204PSC Présentation

The Zilog, Inc. Z86E2204PSC is an 8-bit CMOS Z8 OTP microcontroller with 8 KB of one-time-programmable program memory in a 40-pin DIP package. It is designed for embedded control applications requiring compact logic integration, user-programmable nonvolatile storage, and a conventional through-hole footprint.

An 8-bit microcontroller is a microprocessor optimized for embedded control rather than general-purpose computing. The Z8 OTP family combines a CPU core, programmable memory, digital I/O, timers, and communication resources on one integrated circuit. Because the program memory is one-time-programmable, the configured instruction sequence cannot normally be changed after programming, making the device suitable for dedicated products whose firmware is finalized during manufacturing.

The Z86E2204PSC provides 8 KB of OTP program memory and operates as a CMOS microcontroller. Its 40-pin DIP package supports prototyping, repair, and applications where through-hole assembly is preferred over a compact surface-mount package. The device is listed as obsolete, so new designs should confirm lifecycle status and consider a supported MCU unless an existing product requires the exact function and footprint.

The principal engineering consideration is the OTP programming model. Firmware must be validated before the device is programmed because later field changes are impossible. Designers should also assign every physical pin according to the manufacturer pin-description table, verify the programming interface, and ensure that unused inputs cannot float. Logic levels, oscillator requirements, and peripheral resources must be checked against the exact datasheet before schematic capture.

Typical uses include appliance controllers, simple sequencers, dedicated interface modules, and legacy industrial equipment where a compact 8-bit control engine is sufficient. The MCU can also serve as a supervisory controller when its I/O count and embedded resources meet the product requirements. Since the part is obsolete and described as an 8 KB OTP device, it is most appropriate for maintenance, continuation, or exact-fit replication rather than new platform development without a qualified alternative.

When laying out a board, preserve the 40-pin DIP footprint, provide adequate clearance for programming and soldering, and decouple supply pins near the device according to the manufacturer application guidance. Confirm startup behavior, oscillator limits, and I/O levels in hardware. For new designs, use the Request a Quote form on this page to ask about exact-fit availability and engineering support.

This page consolidates lifecycle information, package details, programming constraints, application guidance, and verification steps for engineers maintaining legacy Z8-based equipment. It also highlights the practical difference between an exact legacy replacement and a modern MCU redesign.

Alternatives de remplacement direct pour Z86E2204PSC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

Z86E2204PSC Valeurs maximales et caractéristiques électriques

Device Type 8-bit CMOS Z8 OTP microcontroller
Program Memory 8 KB OTP
Program Memory Type One-time programmable, 1 program memory
Boîtier 40-pin DIP
Nombre de broches 40 pins
Type de montage Through-hole, 1 mounting type
CPU Architecture 8-bit, 1 CPU architecture
Process Technology CMOS, 1 process technology
Statut du cycle de vie Obsolete, 1 lifecycle status

Guide de configuration des broches du Z86E2204PSC 40-pin dip

Configuration des broches du Z86E2204PSC (boîtier 40-pin dip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 40-pin dip pour le Z86E2204PSC

Aucune donnée de brochage détaillée disponible pour Z86E2204PSC.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

Z86E2204PSC convient pour 6 applications: Legacy Appliance Control, Industrial Sequencer, Dedicated Interface Module, Legacy Sensor Node, Product Continuation Controller, Specialized Control Module.

🔧

Legacy Appliance Control

The Z86E2204PSC can serve as the central controller in a legacy appliance when the original product uses an 8-bit Z8 control architecture and a 40-pin DIP footprint. Its 8 KB OTP program memory is sufficient for compact, fixed control logic covering operating states, timing, and discrete inputs. Because OTP firmware cannot normally be rewritten, the programming process must use a fully validated production image. Keep the established board layout to minimize mechanical and electrical redesign risk, and verify supply voltage, oscillator requirements, and I/O levels from the manufacturer datasheet before release.

🏭

Industrial Sequencer

A production sequencer built around the Z86E2204PSC can use its 8-bit processing core and 8 KB OTP memory for deterministic step control, interlocks, and actuator sequencing. The 40-pin DIP package simplifies repair and through-hole assembly in equipment where long product lifecycles make component continuity more important than miniaturization. Firmware must include safe-state behavior for power loss, invalid sensor conditions, and operator commands. Confirm timer and I/O capacity against the exact datasheet, since the product description alone does not establish peripheral counts or maximum operating frequency.

⚡

Dedicated Interface Module

The Z86E2204PSC is suitable for a compact legacy interface module that translates discrete signals into a controlled sequence or drives a specialized output pattern. Its 8 KB OTP program memory supports fixed protocol handling and state management without external program storage. The 40-pin DIP package can simplify panel wiring, prototyping, and field replacement when a surface-mount design is unnecessary. Engineers should assign unused pins carefully, provide stable oscillator and reset arrangements, and validate electrical compatibility with connected equipment before using the part in new safety-related equipment.

🧩

Legacy Sensor Node

The Z86E2204PSC can serve as the control element of an older sensor node when the device must match an established controller board and its firmware interface. The MCU can execute sampling sequencing, threshold logic, and output updates within the limits of its 8-bit architecture and 8 KB OTP program memory. Because the target is obsolete, use it primarily for continuity of an existing node rather than an expanded network rollout. Verify sensor signal levels, available I/O, oscillator configuration, and power-budget requirements from the manufacturer documentation before production use.

🖥️

Product Continuation Controller

For an established product that cannot be redesigned, the Z86E2204PSC provides an exact continuation path when its original firmware and 40-pin DIP board interface must be retained. The 8 KB OTP memory supports a frozen production program, while the CMOS microcontroller architecture matches the original Z8 control platform. Continuity planning should include controlled OTP programming, production traceability, and a review of remaining inventory. Because the device is obsolete, do not introduce functional changes unless the complete firmware, timing, and electrical behavior are revalidated.

🔧

Specialized Control Module

The Z86E2204PSC can be integrated into a specialized module that requires repeatable logic, limited software updates, and a through-hole controller package. Its 8 KB OTP program memory is appropriate for fixed operation rather than remotely updatable firmware. A compact 40-pin DIP implementation may simplify inspection, manual replacement, and mixed through-hole assembly compared with a fine-pitch surface-mount controller. Before schematic approval, compare every pin assignment and operating condition with the manufacturer datasheet, particularly for supply sequencing, programming access, oscillator startup, and I/O loading.

What is the Z86E2204PSC?
The Z86E2204PSC is an obsolete 8-bit CMOS Z8 microcontroller manufactured by Zilog, Inc., with 8 KB of one-time-programmable program memory in a 40-pin DIP package. The manufacturer datasheet identifies the device as a Z8 OTP microcontroller. Its one-time-programmable architecture is intended for dedicated embedded products in which firmware is finalized before deployment.
How much memory does the Z86E2204PSC have?
The Z86E2204PSC contains 8 KB of one-time-programmable program memory. According to the manufacturer datasheet, the Z86E2204PSC belongs to the Z8 OTP family and uses CMOS technology. Because OTP memory cannot normally be rewritten, all application firmware must be completely validated before the production programming step.
What package does Z86E2204PSC use?
The Z86E2204PSC is supplied in a 40-pin through-hole DIP package. Distributor and datasheet listings describe the device as an 8-bit, 8 KB OTP microcontroller in a 40-pin DIP. The manufacturer pin-description table should be used when assigning signals and designing the PCB footprint, especially for oscillator, programming, reset, and supply connections.
Is the Z86E2204PSC obsolete?
The Z86E2204PSC is listed as obsolete. This status makes the exact device most relevant to product continuation, maintenance, and exact-fit replication. New designs should request lifecycle confirmation and technical support through the Request a Quote form on this page before committing the MCU to a new PCB.
Where can I download the Z86E2204PSC datasheet PDF?
The Z86E2204PSC datasheet PDF can be accessed through the datasheet link on this page. It describes the Z8 OTP microcontroller, including its 8 KB program memory, 40-pin DIP package, pin assignments, electrical characteristics, and operating conditions. Use the manufacturer's pin-description and electrical-characteristics tables when finalizing a schematic or PCB layout.
Where can I find the Z86E2204PSC pinout?
The Z86E2204PSC pinout is documented in the manufacturer datasheet's pin-description section. Use that table to assign all 40 package pins and to identify programming, oscillator, reset, supply, ground, and I/O functions. The package drawing confirms a 40-pin DIP format, but individual signal names must be taken from the device documentation rather than inferred from a generic Z8 layout.
Can Z86E2204PSC firmware be updated after programming?
No, the Z86E2204PSC uses one-time-programmable memory, so production firmware cannot normally be changed after the OTP programming operation. Treat program development, validation, and programming as a controlled manufacturing process. A correct application image should be tested on production-intent hardware before programming components that will be installed in the field.
Where can I buy the Z86E2204PSC?
The Request a Quote form on this page is the appropriate channel for Z86E2204PSC sourcing, stock confirmation, and obsolete-part coordination. Submit the required quantity, target package, and assembly needs in the request. Because the device is obsolete, buyers should request written confirmation of lifecycle status, traceability, and the exact manufacturer part number before placing an order.
What is the current price of Z86E2204PSC?
The current commercial terms for the Z86E2204PSC should be obtained through the Request a Quote form on this page. The form is preferable to static figures for an obsolete device because quantity, traceability, and sourcing conditions can affect availability. Include the exact Z86E2204PSC MPN and your required production quantity in the request.
What is the lead time for Z86E2204PSC?
The lead time for an obsolete Z86E2204PSC depends on remaining factory inventory and sourcing conditions. Use the Request a Quote form on this page to request current availability and a delivery estimate for the exact quantity. For production continuity, provide a requested delivery schedule and an approved alternate-plan deadline with the sourcing request.
Is Z86E2204PSC in stock?
Stock for Z86E2204PSC should be confirmed through the Request a Quote form on this page rather than inferred from an obsolete-part catalog entry. The request should identify the required quantity, acceptable packaging, traceability needs, and target date. XAIPART can then respond with current sourcing and lead-time information for the exact MPN.
What can replace the Z86E2204PSC?
A true drop-in replacement must preserve the 40-pin DIP footprint, pin functions, programming process, supply requirements, and critical timing behavior of the Z86E2204PSC. No verified pin-compatible replacement is identified in the current cross-reference results, so this page does not recommend an unverified substitute. Use the Request a Quote form to ask for an exact-fit sourcing and engineering review.
What is the best equivalent for Z86E2204PSC?
The best equivalent is the device that preserves the Z86E2204PSC's 40-pin DIP interface and legacy programming workflow, not merely another 8-bit microcontroller with similar general-purpose features. No cross-brand part has been verified as a drop-in equivalent. Request an exact-fit review through the Request a Quote form, or plan a redesigned board around a currently supported MCU.
When should I choose Z86E2204PSC over a modern microcontroller?
Choose the Z86E2204PSC when maintaining a legacy product requires the exact 8 KB OTP architecture, established firmware, and 40-pin DIP footprint. Do not choose it as the default for a new design because the device is obsolete. A modern MCU is preferable when active lifecycle support, larger memory, faster development tools, or broader peripheral options are important.
Is Z86E2204PSC suitable for maintaining legacy appliances?
The Z86E2204PSC can be suitable for maintaining legacy appliances when the existing firmware, electrical interface, and 40-pin DIP footprint are retained. Its 8-bit CPU and 8 KB OTP program memory are adequate for simple control tasks, but the obsolete lifecycle status can complicate long-term supply. Obtain sourcing confirmation and verify every electrical parameter against the manufacturer datasheet.
What are the key specifications engineers should know about Z86E2204PSC?
The key Z86E2204PSC specifications are an 8-bit CMOS architecture, 8 KB of OTP program memory, and a 40-pin through-hole DIP package. The manufacturer datasheet also classifies the device as a Z8 OTP microcontroller. Operating frequency, supply range, RAM, I/O count, timer resources, and temperature limits must be confirmed from its electrical and pin tables before design release.

Données de référence d'ingénierie pour Z86E2204PSC — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the Z86E2204PSC when continuing a legacy product requires its exact Z8 CPU architecture, 8 KB OTP memory organization, programming workflow, and 40-pin DIP footprint. It is especially appropriate for maintenance, controlled production continuation, and boards that already contain a qualified image. Do not select it for a new platform without confirming supply continuity and validating the obsolete lifecycle risk. A modern flash-based MCU is the better choice when field updates, larger code memory, current tooling, stronger lifecycle support, or a smaller surface-mount package are priorities. No verified drop-in alternative is presented because a substitute must match not only the package but also pin behavior, timing, programming, and peripheral usage. Use the Request a Quote form for an exact-fit sourcing review or to discuss a supported redesign.

Comparaison avec les alternatives

Paramètre Ce produit
Package 40-pin DIP
Brand Zilog, Inc.
Device Type 8-bit CMOS Z8 OTP microcontroller
Program Memory 8 KB OTP
CPU Architecture 8-bit
Mounting Type Through-hole
Program Memory Type One-time programmable
Lifecycle Status Obsolete

Principaux différenciateurs

  • Exact legacy architecture continuity (vs Generic 8-bit MCU redesign)
  • Fixed production firmware model (vs Flash-memory microcontroller redesign)
  • Serviceable through-hole construction (vs Fine-pitch surface-mount redesign)

Notes de conception

Do not treat OTP program memory as reusable flash. Finalize and validate the complete firmware image before production programming, and control the programming event with an approved process. If field updates are required, continue using the original device only when the product already has a documented programming and revision-control procedure; otherwise redesign around a supported controller.

Use the manufacturer package drawing and pin-description table when creating the 40-pin DIP footprint. Confirm pin 1 orientation, leave adequate soldering clearance, and avoid placing tall components where an OTP programming fixture or manual replacement tool must access the board. Maintain the original board's copper and decoupling arrangement when continuity is more important than miniaturization.

Validate supply voltage, startup behavior, and I/O levels against the exact Z86E2204PSC electrical tables before connecting external signals. Do not infer operating limits from the generic Z8 family. Place required bypass capacitance close to the relevant supply and ground pins using the layout shown in the manufacturer guidance, and confirm that the production supply tolerance remains inside the device requirements.

Estimate junction temperature from the actual supply voltage, I/O current, and ambient conditions rather than relying on a generic Z8 family value. Through-hole DIP construction assists heat conduction into the board, but copper area, enclosure temperature, and airflow still affect the operating margin. Use the manufacturer maximum junction and ambient ratings for the exact device when evaluating an enclosure.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available product information does not establish the requested compliance attributes. The device is identified as obsolete, but lifecycle status alone does not prove RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

Z86E2204PSC datasheet Z86E2204PSC datasheet pdf Z86E2204PSC pinout Z86E2204PSC specifications Z86E2204PSC price Z86E2204PSC stock Z86E2204PSC equivalent Z86E2204PSC replacement Z86E2204PSC footprint Z86E2204PSC 40 pin DIP Z86E2204PSC 8KB OTP Zilog Z86E2204PSC

Composants & termes associés

Zilog, Inc. Z86E2204PSC Z8 OTP 8-bit microcontroller one-time-programmable memory 8 KB program memory CMOS microcontroller 40-pin DIP through-hole package embedded control Z86C9116VEG Z86C9116AEG legacy product continuation OTP programming industrial sequencer appliance controller dedicated interface module sensor node firmware validation programmable logic device semiconductor obsolete component
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ