Z86E2204PSC - 8-Bit 8KB OTP CMOS Microcontroller | Zilog
料号: Z86E2204PSC ✗ 停产Z86E2204PSC 概述
An 8-bit microcontroller is a microprocessor optimized for embedded control rather than general-purpose computing. The Z8 OTP family combines a CPU core, programmable memory, digital I/O, timers, and communication resources on one integrated circuit. Because the program memory is one-time-programmable, the configured instruction sequence cannot normally be changed after programming, making the device suitable for dedicated products whose firmware is finalized during manufacturing.
The Z86E2204PSC provides 8 KB of OTP program memory and operates as a CMOS microcontroller. Its 40-pin DIP package supports prototyping, repair, and applications where through-hole assembly is preferred over a compact surface-mount package. The device is listed as obsolete, so new designs should confirm lifecycle status and consider a supported MCU unless an existing product requires the exact function and footprint.
The principal engineering consideration is the OTP programming model. Firmware must be validated before the device is programmed because later field changes are impossible. Designers should also assign every physical pin according to the manufacturer pin-description table, verify the programming interface, and ensure that unused inputs cannot float. Logic levels, oscillator requirements, and peripheral resources must be checked against the exact datasheet before schematic capture.
Typical uses include appliance controllers, simple sequencers, dedicated interface modules, and legacy industrial equipment where a compact 8-bit control engine is sufficient. The MCU can also serve as a supervisory controller when its I/O count and embedded resources meet the product requirements. Since the part is obsolete and described as an 8 KB OTP device, it is most appropriate for maintenance, continuation, or exact-fit replication rather than new platform development without a qualified alternative.
When laying out a board, preserve the 40-pin DIP footprint, provide adequate clearance for programming and soldering, and decouple supply pins near the device according to the manufacturer application guidance. Confirm startup behavior, oscillator limits, and I/O levels in hardware. For new designs, use the Request a Quote form on this page to ask about exact-fit availability and engineering support.
This page consolidates lifecycle information, package details, programming constraints, application guidance, and verification steps for engineers maintaining legacy Z8-based equipment. It also highlights the practical difference between an exact legacy replacement and a modern MCU redesign.
直接替换替代料: Z86E2204PSC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料Z86E2204PSC 最大额定值与电气特性
| Device Type | 8-bit CMOS Z8 OTP microcontroller |
| Program Memory | 8 KB OTP |
| Program Memory Type | One-time programmable, 1 program memory |
| 封装 | 40-pin DIP |
| 引脚数量 | 40 pins |
| 安装类型 | Through-hole, 1 mounting type |
| CPU Architecture | 8-bit, 1 CPU architecture |
| Process Technology | CMOS, 1 process technology |
| 生命周期状态 | Obsolete, 1 lifecycle status |
Z86E2204PSC 40-pin dip 引脚配置指南
Z86E2204PSC(40-pin dip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: Z86E2204PSC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z86E2204PSC 适用于 6 应用s: Legacy Appliance Control, Industrial Sequencer, Dedicated Interface Module, Legacy Sensor Node, Product Continuation Controller, Specialized Control Module.
Legacy Appliance Control
The Z86E2204PSC can serve as the central controller in a legacy appliance when the original product uses an 8-bit Z8 control architecture and a 40-pin DIP footprint. Its 8 KB OTP program memory is sufficient for compact, fixed control logic covering operating states, timing, and discrete inputs. Because OTP firmware cannot normally be rewritten, the programming process must use a fully validated production image. Keep the established board layout to minimize mechanical and electrical redesign risk, and verify supply voltage, oscillator requirements, and I/O levels from the manufacturer datasheet before release.
推荐
Industrial Sequencer
A production sequencer built around the Z86E2204PSC can use its 8-bit processing core and 8 KB OTP memory for deterministic step control, interlocks, and actuator sequencing. The 40-pin DIP package simplifies repair and through-hole assembly in equipment where long product lifecycles make component continuity more important than miniaturization. Firmware must include safe-state behavior for power loss, invalid sensor conditions, and operator commands. Confirm timer and I/O capacity against the exact datasheet, since the product description alone does not establish peripheral counts or maximum operating frequency.
推荐
Dedicated Interface Module
The Z86E2204PSC is suitable for a compact legacy interface module that translates discrete signals into a controlled sequence or drives a specialized output pattern. Its 8 KB OTP program memory supports fixed protocol handling and state management without external program storage. The 40-pin DIP package can simplify panel wiring, prototyping, and field replacement when a surface-mount design is unnecessary. Engineers should assign unused pins carefully, provide stable oscillator and reset arrangements, and validate electrical compatibility with connected equipment before using the part in new safety-related equipment.
推荐
Legacy Sensor Node
The Z86E2204PSC can serve as the control element of an older sensor node when the device must match an established controller board and its firmware interface. The MCU can execute sampling sequencing, threshold logic, and output updates within the limits of its 8-bit architecture and 8 KB OTP program memory. Because the target is obsolete, use it primarily for continuity of an existing node rather than an expanded network rollout. Verify sensor signal levels, available I/O, oscillator configuration, and power-budget requirements from the manufacturer documentation before production use.
推荐
Product Continuation Controller
For an established product that cannot be redesigned, the Z86E2204PSC provides an exact continuation path when its original firmware and 40-pin DIP board interface must be retained. The 8 KB OTP memory supports a frozen production program, while the CMOS microcontroller architecture matches the original Z8 control platform. Continuity planning should include controlled OTP programming, production traceability, and a review of remaining inventory. Because the device is obsolete, do not introduce functional changes unless the complete firmware, timing, and electrical behavior are revalidated.
推荐
Specialized Control Module
The Z86E2204PSC can be integrated into a specialized module that requires repeatable logic, limited software updates, and a through-hole controller package. Its 8 KB OTP program memory is appropriate for fixed operation rather than remotely updatable firmware. A compact 40-pin DIP implementation may simplify inspection, manual replacement, and mixed through-hole assembly compared with a fine-pitch surface-mount controller. Before schematic approval, compare every pin assignment and operating condition with the manufacturer datasheet, particularly for supply sequencing, programming access, oscillator startup, and I/O loading.
推荐
推荐产品汇总
工程参考数据: Z86E2204PSC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 40-pin DIP |
| Brand | Zilog, Inc. |
| Device Type | 8-bit CMOS Z8 OTP microcontroller |
| Program Memory | 8 KB OTP |
| CPU Architecture | 8-bit |
| Mounting Type | Through-hole |
| Program Memory Type | One-time programmable |
| Lifecycle Status | Obsolete |
关键差异点
- Exact legacy architecture continuity (对比 Generic 8-bit MCU redesign)
- Fixed production firmware model (对比 Flash-memory microcontroller redesign)
- Serviceable through-hole construction (对比 Fine-pitch surface-mount redesign)
设计说明
Do not treat OTP program memory as reusable flash. Finalize and validate the complete firmware image before production programming, and control the programming event with an approved process. If field updates are required, continue using the original device only when the product already has a documented programming and revision-control procedure; otherwise redesign around a supported controller.
Use the manufacturer package drawing and pin-description table when creating the 40-pin DIP footprint. Confirm pin 1 orientation, leave adequate soldering clearance, and avoid placing tall components where an OTP programming fixture or manual replacement tool must access the board. Maintain the original board's copper and decoupling arrangement when continuity is more important than miniaturization.
Validate supply voltage, startup behavior, and I/O levels against the exact Z86E2204PSC electrical tables before connecting external signals. Do not infer operating limits from the generic Z8 family. Place required bypass capacitance close to the relevant supply and ground pins using the layout shown in the manufacturer guidance, and confirm that the production supply tolerance remains inside the device requirements.
Estimate junction temperature from the actual supply voltage, I/O current, and ambient conditions rather than relying on a generic Z8 family value. Through-hole DIP construction assists heat conduction into the board, but copper area, enclosure temperature, and airflow still affect the operating margin. Use the manufacturer maximum junction and ambient ratings for the exact device when evaluating an enclosure.
合规信息
The available product information does not establish the requested compliance attributes. The device is identified as obsolete, but lifecycle status alone does not prove RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.