Zilog

Z86E3016PEC - 8-Bit 16MHz OTP MCU in 28-DIP | Zilog

Référence : Z86E3016PEC ✓ Actif
4.5 V to 5.5 V Vdss 28-pin DIP Package 16 MHz Speed OTP Memory
MOQ : 1 |

Z86E3016PEC Présentation

The Zilog Z86E3016PEC is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory, 237 bytes of RAM, and 24 I/O pins in a 28-pin DIP package. Its 4.5 V to 5.5 V operating range and integrated UART make it suitable for compact embedded control systems that need deterministic peripheral integration without external program memory.

An 8-bit microcontroller is a programmable semiconductor that executes firmware on a central processing unit and connects directly to sensors, switches, indicators, and communication equipment. The Z8 belongs to the broader microcontroller hierarchy, which sits within embedded processors and semiconductor control components. This Z86E3016PEC variant combines a 16 MHz operating clock, 4 KB OTP program storage, two 8-bit timers, and UART communication in one device.

The principal features are a 16 MHz clock, 4 KB of OTP program memory, 237 bytes of data RAM, and 24 general-purpose I/O lines. The two 8-bit timers support periodic timing, counting, and basic event-generation tasks, while the UART provides a simple serial interface for connecting the controller to a host computer, sensor module, or another embedded controller.

The Z8 architecture is designed for compact, cost-sensitive embedded control rather than high-throughput processing. Its 8-bit ALU naturally handles control states, switch logic, counters, and byte-oriented protocols efficiently. Program storage is implemented as OTP, so each device can be programmed once during manufacturing or provisioning. The 237-byte RAM provides working memory for variables, stack operations, and short-lived data structures.

Typical applications include appliance controllers, small motor-control boards, instrumentation front ends, programmable logic controllers, LED-sequencing systems, and serial-interface modules. The 28-pin DIP package is useful for prototypes, educational platforms, and through-hole assemblies where reworkability and straightforward socket or PCB insertion are priorities.

Designers should preserve adequate input and output voltage headroom around the 4.5 V to 5.5 V operating range. Because program memory is OTP, firmware changes after programming are not possible; validate the complete application image and test logic before production programming. The manufacturer pin-description table should also be used directly when assigning connector signals and PCB tracks.

This product page combines the Z86E3016PEC core specifications, package information, application guidance, and qualified comparison points into a compact engineering reference. It also distinguishes directly interchangeable options from related devices whose package or architecture prevents a true drop-in replacement.

Alternatives de remplacement direct pour Z86E3016PEC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec Z86E3016PEC (même facteur de forme et même empreinte) — différant par Program Memory Type, Program Memory.

Zilog
Program Memory Type: One-Time Programmable (OTP)
Program Memory: 4 KB (4K × 8) per DigiKey
Comparer avec Z86E3016PEC →
Zilog
Program Memory: 4 KB
Comparer avec Z86E3016PEC →

Z86E3016PSC

✅ Remplacement direct
Zilog
📦 28-pin DIP
Z8 · 8-bit · 16 MHz · 4 KB · 4K × 8 bits · OTP

Contactez-nous pour le prix

Voir la fiche technique →

Z86E3012PSC

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin DIP
Lower-memory Z86E301x family device; program-memory capacity differs while the 28-pin DIP footprint and Z8 control architecture are retained

📋 Alternative de référence (hors catalogue)

Z86E3014PSC

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin DIP
Lower-memory Z86E301x family device; OTP capacity differs while the 28-pin DIP footprint and Z8 control architecture are retained

📋 Alternative de référence (hors catalogue)

Z86E3018PSC

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin DIP
Higher-memory Z86E301x family device; OTP capacity differs while the 28-pin DIP footprint and Z8 control architecture are retained

📋 Alternative de référence (hors catalogue)

Z86E3010PSC

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin DIP
Lower-memory Z86E301x family device; OTP capacity differs while the 28-pin DIP footprint and Z8 control architecture are retained

📋 Alternative de référence (hors catalogue)

Z86E3016PEC Valeurs maximales et caractéristiques électriques

Microcontroller Type 8-bit Z8 microcontroller
Fréquence d'horloge maximale 16 MHz
Program Memory Type OTP
Program Memory Size 4 KB
Data RAM Size 237 bytes
Number of I/O Pins 24
Supply Voltage Range 4.5 V to 5.5 V
Timer Count 2
Timer Resolution 8-bit
Serial Interface UART
Package Type 28-pin DIP
Style de montage Through-hole

Guide de configuration des broches du Z86E3016PEC 28-pin dip

Configuration des broches du Z86E3016PEC (boîtier 28-pin dip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 28-pin dip pour le Z86E3016PEC

Aucune donnée de brochage détaillée disponible pour Z86E3016PEC.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

Z86E3016PEC convient pour 6 applications: Appliance Control Boards, UART Serial Interface Modules, Programmable Timer and Relay Control, Instrumentation Front Ends, LED Sequencing and Displays, Educational and Prototype Controllers.

🔧

Appliance Control Boards

The Z86E3016PEC fits compact appliance controllers because its 16 MHz Z8 core can execute sequential control logic quickly while 24 I/O lines connect buttons, indicators, and discrete sensors. The two 8-bit timers support timing functions such as debounce intervals, delayed outputs, and periodic tasks. Its 237 bytes of RAM is sufficient for small working-state variables, while the 4 KB OTP area stores a fixed control program. The 4.5 V to 5.5 V supply range suits regulated 5 V appliance electronics. Because OTP cannot be rewritten, firmware validation and production programming must occur before final assembly.

🌐

UART Serial Interface Modules

The Z86E3016PEC is appropriate for a simple UART bridge or serial control module because the device combines an 8-bit processor, 16 MHz clock, and integrated UART in a 28-pin DIP package. The remaining I/O pins can expose status indicators, mode controls, handshake signals, or additional logic. Its 4 KB OTP program store is practical for fixed command parsing and protocol conversion, while 237 bytes of RAM can hold buffers and state variables. The 4.5 V to 5.5 V operating range simplifies integration with 5 V logic, although interface levels should be checked whenever external equipment uses different voltage domains.

⚡

Programmable Timer and Relay Control

The Z86E3016PEC can implement relay, pulse, and timing-control functions where deterministic software scheduling is more useful than a general-purpose processor. Its two 8-bit timers provide counting and timing resources, while 24 I/O lines allow relay drivers, pushbuttons, status lamps, and interlocks to be connected directly. The 16 MHz clock gives adequate execution headroom for state-machine control and input scanning. OTP storage ensures the final control logic remains fixed in deployed equipment, and the 28-pin DIP package supports straightforward prototype insertion and socketed assembly. Designers should account for inductive transients and provide appropriate driver isolation rather than switching loads directly from microcontroller pins.

📺

Instrumentation Front Ends

The Z86E3016PEC can serve as the supervisory controller in a small instrumentation front end where the MCU must scan switches, format status, and communicate over UART. Its 24 I/O lines support digital sensors, threshold inputs, alarm outputs, and panel controls, while the two timers support sampling intervals and debounce timing. The 4 KB OTP program store is suitable for a fixed acquisition-control routine, and the 237 bytes of RAM accommodates compact state and buffer structures. A 5 V regulated supply aligns with the stated 4.5 V to 5.5 V operating range. For precision analog measurement, the system should use dedicated external conversion circuitry and configure the digital interface accordingly.

💡

LED Sequencing and Displays

The Z86E3016PEC is well matched to LED sequencing, indicator panels, and small display controllers because the 24 I/O lines can operate multiple discrete indicators while the 16 MHz processor manages timing patterns and user commands. Two 8-bit timers can divide the system clock into animation or multiplexed update intervals, leaving processing capacity for the main control state machine. The 237-byte RAM is adequate for compact frame and position variables, while 4 KB OTP accommodates a fixed sequence library or display-control firmware. The through-hole 28-pin DIP package is particularly convenient for educational panels, prototypes, and repairable assemblies, subject to suitable current-limiting and driver arrangements for the LEDs.

🏭

Educational and Prototype Controllers

The Z86E3016PEC is well suited to educational MCU platforms and rapid prototypes because it combines a 16 MHz Z8 processor, 24 I/O pins, timers, UART, and 4 KB of OTP memory in an accessible 28-pin DIP package. Through-hole construction permits socket mounting, easy rework, and straightforward observation of pin-level behavior during development. The 5 V operating range also aligns with common laboratory and classroom power systems. Before programming a production unit, developers should validate reset behavior, clock configuration, UART behavior, and all external load states. The OTP limitation also makes it necessary to test the exact firmware image on expendable engineering samples before committing production devices.

Récapitulatif des produits recommandés

Z86E3016PSC Zilog Utilisé dans : Appliance Control Boards, UART Serial Interface Modules, Programmable Timer and Relay Control, Instrumentation Front Ends, LED Sequencing and Displays, Educational and Prototype Controllers Z86E8316VEG Related 4 KB OTP Z8 microcontroller Utilisé dans : Appliance Control Boards, UART Serial Interface Modules, Programmable Timer and Relay Control, Instrumentation Front Ends, LED Sequencing and Displays, Educational and Prototype Controllers
What is the Z86E3016PEC?
The Z86E3016PEC is an 8-bit Zilog Z8 microcontroller with a 16 MHz clock, 4 KB of OTP program memory, 237 bytes of RAM, and 24 I/O pins. It is packaged in a 28-pin DIP and operates from 4.5 V to 5.5 V. According to the Zilog datasheet, the device includes two 8-bit timers and UART communication for compact embedded-control designs.
What are the key specifications of Z86E3016PEC that engineers should know?
The Z86E3016PEC combines an 8-bit Z8 CPU, 16 MHz maximum clock, 4 KB OTP program memory, 237 bytes of RAM, and 24 I/O pins in a 28-pin DIP package. Its 4.5 V to 5.5 V supply range, two 8-bit timers, and UART are the principal design parameters. According to the Zilog datasheet, these resources target compact control, timing, and serial-communication functions.
What is the operating voltage of Z86E3016PEC?
The Z86E3016PEC operates from 4.5 V to 5.5 V. According to the Zilog datasheet, this supply range applies to the complete device and its 24 I/O lines. A design should therefore use a regulated 5 V source and verify that connected sensors, relays, and interface circuits have compatible logic levels. The OTP program memory must also be programmed only during the manufacturing flow because it cannot be rewritten afterward.
How much program memory and RAM does Z86E3016PEC have?
The Z86E3016PEC contains 4 KB of one-time-programmable program memory and 237 bytes of RAM. According to the Zilog datasheet, the OTP area stores the application firmware and cannot be changed after programming. The RAM is used for working variables, stack operations, and short-lived data. Applications requiring frequent code updates should instead use a flash-memory MCU or include an external reprogrammable memory solution.
Where can I download the Z86E3016PEC datasheet PDF?
The Z86E3016PEC datasheet PDF is available through the Zilog document page linked in the Data Sources section of this product page. The document is a 66-page technical file according to the indexed listing and covers the Z8 4K OTP microcontroller family. Use the manufacturer document when assigning pin names, configuring clocks, programming OTP memory, or checking the detailed electrical characteristics.
Where can I find the Z86E3016PEC pinout?
The Z86E3016PEC pinout is defined in the pin-description section of the Zilog datasheet. The device uses a 28-pin DIP package with 24 I/O pins, so the complete package pin map should be consulted before assigning external signals. Do not infer the remaining power, ground, clock, reset, or programming pins from the I/O count alone; follow the manufacturer pin-description table when laying out the PCB.
Where can I buy Z86E3016PEC online?
The Z86E3016PEC can be requested through the Request a Quote form on this XAIPART product page. Submit the exact MPN, required quantity, and preferred shipment destination to receive current commercial terms and availability. The 28-pin DIP suffix identifies the specific package and ordering configuration; requesters should include that complete suffix when seeking a replacement for an existing design.
What is the price of Z86E3016PEC?
Current pricing for the Z86E3016PEC is handled through the Request a Quote form on this page rather than embedded as a static figure. Submit the required quantity and packaging preference to obtain a quotation tied to the exact MPN. This approach also allows procurement teams to confirm lot consistency, delivery timing, and whether any additional production or test requirements apply.
What is the lead time and stock status for Z86E3016PEC?
The current stock position and lead time for Z86E3016PEC should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and shipment destination in the request. Because programmed OTP inventory can differ from unprogrammed component inventory, buyers should also state whether the devices must arrive blank or be factory-programmed before shipment.
What can replace Z86E3016PEC?
A true drop-in replacement for the Z86E3016PEC must have the same 28-pin DIP footprint, compatible pin functions, a 16 MHz-class clock, and equivalent memory and peripheral resources. No qualifying replacement was identified in the cross-reference material reviewed for this page. Related Z8 devices with PLCC packages, such as Z86E3016PSC and Z86E8316VEG, are not drop-in substitutes because their physical packages differ.
Is Z86E3016PSC the same as Z86E3016PEC?
No. The Z86E3016PSC is a related Z86E3016-family microcontroller, but it is identified as a 28-pin PLCC device, while the Z86E3016PEC is a 28-pin DIP device. Because the packages require different PCB land patterns, the Z86E3016PSC is not a pin-to-pin drop-in replacement for an existing Z86E3016PEC board. It can serve as a functional alternative only when the PCB and assembly process are redesigned.
What is the difference between Z86E3016PEC and Z86E8316VEG?
The Z86E3016PEC is a 28-pin DIP device, while the indexed Z86E8316VEG is a 28-pin PLCC device. Both are described as 8-bit Z8 OTP microcontrollers with 4 KB program memory, but the package distinction makes the Z86E8316VEG unsuitable for direct PCB substitution. According to the comparison listing, the relevant technical difference for retrofit work is package form rather than a directly interchangeable footprint.
When should I choose Z86E3016PEC over a PLCC alternative?
Choose the Z86E3016PEC when the target PCB already uses a 28-pin DIP footprint, through-hole assembly is acceptable, or the design benefits from socketed prototyping. Its 16 MHz clock, 4 KB OTP memory, 237 bytes of RAM, 24 I/O pins, and UART suit compact control systems. A PLCC alternative may be preferable for a newly designed, surface-mount board, but it is not a drop-in replacement for the DIP footprint.
Is Z86E3016PEC suitable for a UART-based controller?
The Z86E3016PEC is suitable for a compact UART-based controller because it includes an 8-bit Z8 core operating at 16 MHz, 24 I/O pins, two 8-bit timers, and 237 bytes of RAM. According to the Zilog datasheet, the UART supports serial communication with a host or peripheral controller. Firmware must define baud-rate configuration, framing, protocol timing, and error recovery.
Can Z86E3016PEC be used in automotive or industrial products?
The Z86E3016PEC can be evaluated for industrial control and other embedded applications, but its automotive suitability must not be assumed from the presence of a -40C to +85C option or from generic MCU status. According to the Zilog ordering information, the -PEC package is a 28-pin DIP device. Confirm the exact temperature grade, AEC-Q100 qualification, and production lifecycle requirements in the Zilog datasheet before releasing an automotive design.

Données de référence d'ingénierie pour Z86E3016PEC — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the Z86E3016PEC for an existing 28-pin DIP PCB or a new prototype that benefits from socketed assembly and straightforward firmware debugging. Its 16 MHz Z8 core, 4 KB OTP program store, 237 bytes of RAM, 24 I/O pins, two 8-bit timers, and UART cover compact appliance controls, relay logic, instrument interfaces, and serial modules. Select a PLCC alternative only when the PCB can be redesigned; Z86E3016PSC and Z86E8316VEG are related devices, not pin-to-pin substitutes for the DIP footprint. For applications needing repeated firmware updates, choose a flash-memory MCU because OTP cannot be rewritten. Confirm temperature grade, production status, and exact electrical limits in the Zilog datasheet before releasing a regulated or automotive design.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Zilog
Package 28-pin DIP
CPU Architecture 8-bit Z8
Maximum Clock Frequency 16 MHz
Program Memory 4 KB OTP
Data RAM 237 bytes
Number of I/O Pins 24
Supply Voltage Range 4.5 V to 5.5 V
Timer Resources 2 x 8-bit timers
Serial Interface UART

Principaux différenciateurs

  • Combines a 16 MHz Z8 core with integrated control resources (vs General-purpose 8-bit MCU designs)
  • Maintains a straightforward through-hole implementation (vs Z86E3016PSC)
  • Provides a defined compact memory configuration (vs Z86E8316VEG)

Notes de conception

Treat the 4 KB program memory as OTP rather than rewritable flash. Build and test the exact production firmware on engineering devices, verify reset and startup behavior, and program only after the image has passed functional review. A late firmware correction will require replacing the programmed MCU or redesigning the product with a reprogrammable memory device.

Assign every package connection using the manufacturer pin-description table, including power, ground, reset, clock, programming, and I/O pins. The 28-pin DIP footprint requires adequate spacing for through-hole insertion and socket soldering. Confirm that board outlines, keepouts, and connector locations match the exact Z86E3016PEC package rather than a similarly described PLCC or other Z8 variant.

Operate the device from a regulated supply within its stated 4.5 V to 5.5 V range. Place local supply bypassing close to the power pins and route return current efficiently through the board. External relays, motors, and high-current LEDs should use suitable driver stages because their supply transients and load currents are not intended to be handled directly by the microcontroller I/O pins.

Define UART baud rate, parity, stop bits, and timeout behavior in firmware before connecting a host or peripheral. Keep the serial route away from switching nodes and relay-driver wiring where practical. For long cables or electrically noisy environments, use an appropriate line driver or differential interface instead of relying on the on-board UART connection alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer document should be used to confirm environmental, material, and automotive qualification status for the exact Z86E3016PEC ordering configuration.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

Z86E3016PEC datasheet Z86E3016PEC pinout Z86E3016PEC datasheet pdf Z86E3016PEC equivalent Z86E3016PEC replacement Z86E3016PEC price Z86E3016PEC stock Zilog Z86E3016PEC Z86E3016PEC 28-DIP footprint Z86E3016PEC 16MHz 4KB OTP Z86E3016PEC UART controller Z86E3016PEC vs Z86E3016PSC

Composants & termes associés

Zilog Z86E3016PEC Z86E3016PSC Z86E8316VEG Z8 architecture 8-bit microcontroller embedded microcontroller embedded processor semiconductor one-time-programmable memory OTP UART Universal Asynchronous Receiver/Transmitter 16 MHz clock 4 KB program memory 237 bytes RAM 24 I/O pins 8-bit timer 4.5 V to 5.5 V power supply 28-pin DIP DIP package through-hole mounting Z86E3016PEC UART control application Z86E3016PEC appliance control application
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ