Z86E3016PEC - 8-Bit 16MHz OTP MCU in 28-DIP | Zilog
MPN: Z86E3016PEC ✓ ActiveZ86E3016PEC Overview
An 8-bit microcontroller is a programmable semiconductor that executes firmware on a central processing unit and connects directly to sensors, switches, indicators, and communication equipment. The Z8 belongs to the broader microcontroller hierarchy, which sits within embedded processors and semiconductor control components. This Z86E3016PEC variant combines a 16 MHz operating clock, 4 KB OTP program storage, two 8-bit timers, and UART communication in one device.
The principal features are a 16 MHz clock, 4 KB of OTP program memory, 237 bytes of data RAM, and 24 general-purpose I/O lines. The two 8-bit timers support periodic timing, counting, and basic event-generation tasks, while the UART provides a simple serial interface for connecting the controller to a host computer, sensor module, or another embedded controller.
The Z8 architecture is designed for compact, cost-sensitive embedded control rather than high-throughput processing. Its 8-bit ALU naturally handles control states, switch logic, counters, and byte-oriented protocols efficiently. Program storage is implemented as OTP, so each device can be programmed once during manufacturing or provisioning. The 237-byte RAM provides working memory for variables, stack operations, and short-lived data structures.
Typical applications include appliance controllers, small motor-control boards, instrumentation front ends, programmable logic controllers, LED-sequencing systems, and serial-interface modules. The 28-pin DIP package is useful for prototypes, educational platforms, and through-hole assemblies where reworkability and straightforward socket or PCB insertion are priorities.
Designers should preserve adequate input and output voltage headroom around the 4.5 V to 5.5 V operating range. Because program memory is OTP, firmware changes after programming are not possible; validate the complete application image and test logic before production programming. The manufacturer pin-description table should also be used directly when assigning connector signals and PCB tracks.
This product page combines the Z86E3016PEC core specifications, package information, application guidance, and qualified comparison points into a compact engineering reference. It also distinguishes directly interchangeable options from related devices whose package or architecture prevents a true drop-in replacement.
Drop-in alternatives for Z86E3016PEC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with Z86E3016PEC (same form factor and footprint) — differing in Program Memory Type, Program Memory.
Z86E3016PSC
✅ Drop-InContact for price
View Datasheet →Z86E3012PSC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
Z86E3014PSC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
Z86E3018PSC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
Z86E3010PSC
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
Z86E3016PEC Maximum Ratings & Electrical Characteristics
| Microcontroller Type | 8-bit Z8 microcontroller |
| Maximum Clock Frequency | 16 MHz |
| Program Memory Type | OTP |
| Program Memory Size | 4 KB |
| Data RAM Size | 237 bytes |
| Number of I/O Pins | 24 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Timer Count | 2 |
| Timer Resolution | 8-bit |
| Serial Interface | UART |
| Package Type | 28-pin DIP |
| Mounting Style | Through-hole |
Z86E3016PEC 28-pin dip Pin Configuration Guide
Pin configuration for Z86E3016PEC (28-pin dip package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for Z86E3016PEC.
Refer to the datasheet for full pin configuration.
Typical Applications
Z86E3016PEC is suitable for 6 applications: Appliance Control Boards, UART Serial Interface Modules, Programmable Timer and Relay Control, Instrumentation Front Ends, LED Sequencing and Displays, Educational and Prototype Controllers.
Appliance Control Boards
The Z86E3016PEC fits compact appliance controllers because its 16 MHz Z8 core can execute sequential control logic quickly while 24 I/O lines connect buttons, indicators, and discrete sensors. The two 8-bit timers support timing functions such as debounce intervals, delayed outputs, and periodic tasks. Its 237 bytes of RAM is sufficient for small working-state variables, while the 4 KB OTP area stores a fixed control program. The 4.5 V to 5.5 V supply range suits regulated 5 V appliance electronics. Because OTP cannot be rewritten, firmware validation and production programming must occur before final assembly.
Recommended
UART Serial Interface Modules
The Z86E3016PEC is appropriate for a simple UART bridge or serial control module because the device combines an 8-bit processor, 16 MHz clock, and integrated UART in a 28-pin DIP package. The remaining I/O pins can expose status indicators, mode controls, handshake signals, or additional logic. Its 4 KB OTP program store is practical for fixed command parsing and protocol conversion, while 237 bytes of RAM can hold buffers and state variables. The 4.5 V to 5.5 V operating range simplifies integration with 5 V logic, although interface levels should be checked whenever external equipment uses different voltage domains.
Recommended
Programmable Timer and Relay Control
The Z86E3016PEC can implement relay, pulse, and timing-control functions where deterministic software scheduling is more useful than a general-purpose processor. Its two 8-bit timers provide counting and timing resources, while 24 I/O lines allow relay drivers, pushbuttons, status lamps, and interlocks to be connected directly. The 16 MHz clock gives adequate execution headroom for state-machine control and input scanning. OTP storage ensures the final control logic remains fixed in deployed equipment, and the 28-pin DIP package supports straightforward prototype insertion and socketed assembly. Designers should account for inductive transients and provide appropriate driver isolation rather than switching loads directly from microcontroller pins.
Recommended
Instrumentation Front Ends
The Z86E3016PEC can serve as the supervisory controller in a small instrumentation front end where the MCU must scan switches, format status, and communicate over UART. Its 24 I/O lines support digital sensors, threshold inputs, alarm outputs, and panel controls, while the two timers support sampling intervals and debounce timing. The 4 KB OTP program store is suitable for a fixed acquisition-control routine, and the 237 bytes of RAM accommodates compact state and buffer structures. A 5 V regulated supply aligns with the stated 4.5 V to 5.5 V operating range. For precision analog measurement, the system should use dedicated external conversion circuitry and configure the digital interface accordingly.
Recommended
LED Sequencing and Displays
The Z86E3016PEC is well matched to LED sequencing, indicator panels, and small display controllers because the 24 I/O lines can operate multiple discrete indicators while the 16 MHz processor manages timing patterns and user commands. Two 8-bit timers can divide the system clock into animation or multiplexed update intervals, leaving processing capacity for the main control state machine. The 237-byte RAM is adequate for compact frame and position variables, while 4 KB OTP accommodates a fixed sequence library or display-control firmware. The through-hole 28-pin DIP package is particularly convenient for educational panels, prototypes, and repairable assemblies, subject to suitable current-limiting and driver arrangements for the LEDs.
Recommended
Educational and Prototype Controllers
The Z86E3016PEC is well suited to educational MCU platforms and rapid prototypes because it combines a 16 MHz Z8 processor, 24 I/O pins, timers, UART, and 4 KB of OTP memory in an accessible 28-pin DIP package. Through-hole construction permits socket mounting, easy rework, and straightforward observation of pin-level behavior during development. The 5 V operating range also aligns with common laboratory and classroom power systems. Before programming a production unit, developers should validate reset behavior, clock configuration, UART behavior, and all external load states. The OTP limitation also makes it necessary to test the exact firmware image on expendable engineering samples before committing production devices.
Recommended
Recommended Products Summary
Engineering reference data for Z86E3016PEC — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Zilog |
| Package | 28-pin DIP |
| CPU Architecture | 8-bit Z8 |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 4 KB OTP |
| Data RAM | 237 bytes |
| Number of I/O Pins | 24 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Timer Resources | 2 x 8-bit timers |
| Serial Interface | UART |
Key Differentiators
- Combines a 16 MHz Z8 core with integrated control resources (vs General-purpose 8-bit MCU designs)
- Maintains a straightforward through-hole implementation (vs Z86E3016PSC)
- Provides a defined compact memory configuration (vs Z86E8316VEG)
Design Notes
Treat the 4 KB program memory as OTP rather than rewritable flash. Build and test the exact production firmware on engineering devices, verify reset and startup behavior, and program only after the image has passed functional review. A late firmware correction will require replacing the programmed MCU or redesigning the product with a reprogrammable memory device.
Assign every package connection using the manufacturer pin-description table, including power, ground, reset, clock, programming, and I/O pins. The 28-pin DIP footprint requires adequate spacing for through-hole insertion and socket soldering. Confirm that board outlines, keepouts, and connector locations match the exact Z86E3016PEC package rather than a similarly described PLCC or other Z8 variant.
Operate the device from a regulated supply within its stated 4.5 V to 5.5 V range. Place local supply bypassing close to the power pins and route return current efficiently through the board. External relays, motors, and high-current LEDs should use suitable driver stages because their supply transients and load currents are not intended to be handled directly by the microcontroller I/O pins.
Define UART baud rate, parity, stop bits, and timeout behavior in firmware before connecting a host or peripheral. Keep the serial route away from switching nodes and relay-driver wiring where practical. For long cables or electrically noisy environments, use an appropriate line driver or differential interface instead of relying on the on-board UART connection alone.
Compliance Information
The manufacturer document should be used to confirm environmental, material, and automotive qualification status for the exact Z86E3016PEC ordering configuration.