Z86E4016VEG 16MHz 8-Bit OTP MCU | Zilog | 44-Pin LCC
Référence : Z86E4016VEG ✓ ActifZ86E4016VEG Présentation
An 8-bit microcontroller is a compact control IC designed for embedded logic, sequencing, input monitoring, and output control. Within the embedded-control hierarchy, the Z86E4016VEG belongs to the Z8 family of 8-bit microcontrollers and uses one-time-programmable memory rather than mask-programmed ROM or rewritable flash. This architecture is suited to moderate-control tasks where firmware is written once and the completed product does not require in-circuit firmware updates.
The principal device characteristics include a 16 MHz clock, 4 KB or 4K x 8 bits of OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 4.5 V to 5.5 V supply range. The Z8 core provides the central processing, interrupt, timer, and I/O resources required for embedded control. Programmable OTP options shown in the device documentation include an RC oscillator, EPROM protection, and auto-latch disable, allowing the final configuration to be tailored to the product design.
The Z86E4016VEG is offered in a 44-pin LCC package measuring approximately 16.6 mm by 16.6 mm. Its relatively high pin count provides access to 32 I/O lines alongside control and power functions. Because the MCU operates from a narrow 5 V-class supply range, the board designer must account for the supply tolerance, startup behavior, oscillator requirements, and port loading of the selected implementation.
Typical uses include appliance and industrial control modules, keyboard or panel interfaces, simple motor-sequencing controllers, LED status and lighting controllers, and compact embedded products that require deterministic one-time-programmed control. The device is especially appropriate when program revisions are unnecessary and its 32 I/O lines, 236-byte RAM, and 16 MHz processing rate satisfy the control workload.
For PCB design, use the manufacturer pin-description table to assign every LCC-44 connection, provide the required clock and decoupling components, and keep sensitive input paths away from switching nodes. Confirm the selected package drawing, exposed programming method, and operating-temperature limits against the official datasheet before releasing a PCB.
This product page consolidates the core Z86E4016VEG specifications, package information, sourcing guidance, application context, and validated drop-in alternatives. The comparison and design notes focus on the decisions that materially affect firmware support, PCB reuse, I/O availability, and supply compatibility.
Alternatives de remplacement direct pour Z86E4016VEG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Z86E4016VEE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
Z86E4016VEC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Z86E4016VEG Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit Z8 one-time-programmable microcontroller |
| Fréquence d'horloge maximale | 16 MHz |
| Largeur du bus de données | 8 bit |
| Program Memory | 4 KB OTP (4K x 8 bits) |
| RAM | 236 bytes |
| I/O Lines | 32 lines |
| Tension d'alimentation de fonctionnement | 4.5 V to 5.5 V |
| Boîtier | 44-pin LCC, 16.6 mm x 16.6 mm |
| Type de montage | Surface mount |
| Programmable OTP Option | RC oscillator supported |
| Programmable OTP Option | EPROM protection supported |
| Programmable OTP Option | Auto-latch disable supported |
| Memory Architecture | One-time programmable ROM with RAM |
| Core / Architecture | Z8 8-bit embedded-control core |
| Statut RoHS | compliant |
| Package Dimensions | 16.6 mm x 16.6 mm |
| Statut du cycle de vie | Active |
| Programming Memory Type | OTP |
Guide de configuration des broches du Z86E4016VEG 16.6 mm x 16.6 mm
Configuration des broches du Z86E4016VEG (boîtier 16.6 mm x 16.6 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour Z86E4016VEG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
Z86E4016VEG convient pour 6 applications: Appliance Control Modules, LED Lighting and Display Control, Keyboard and Panel Interfaces, Small Motor Sequencing Controls, Industrial Sensor and Switch Logic, Security and Access Control.
Appliance Control Modules
The Z86E4016VEG fits compact appliance-control boards that coordinate buttons, sensors, relays, and status indicators. Its 16 MHz Z8 core provides more than enough processing capability for sequential control logic, while 32 I/O lines allow multiple inputs and outputs to be connected without an external I/O expander. The 4 KB OTP program memory suits products whose firmware is finalized before production and never updated. With a 4.5 V to 5.5 V supply requirement, the design should use a regulated 5 V rail, local decoupling, and careful partitioning between sensitive inputs and switching loads.
Recommandé
LED Lighting and Display Control
The Z86E4016VEG is well suited to LED matrix, signage, and status-display controllers where many outputs must be updated under deterministic timing. Its 32 I/O lines can distribute control signals among multiple LED banks, while the 16 MHz operating rate supports efficient multiplexed update routines. The 236 bytes of RAM provide workspace for display state and timing variables, and the 4 KB OTP memory accommodates a fixed lighting pattern or menu. Designers should budget output current separately, use suitable transistor or driver circuitry where the MCU port load is insufficient, and place the MCU away from high-current switching paths.
Recommandé
Keyboard and Panel Interfaces
A Z86E4016VEG-based panel controller can scan switches, encode user commands, debounce inputs, and drive indicator outputs in a compact 44-pin LCC footprint. The 32 available I/O lines provide ample connections for matrix scanning and control signals, while the 16 MHz Z8 core supports responsive polling and interrupt-driven operation. Because the MCU offers only 236 bytes of RAM, the firmware should use a compact state machine rather than buffering large amounts of input data. Pull-up or pull-down requirements and switch-contact behavior should be verified against the port characteristics in the manufacturer pin and electrical tables.
Recommandé
Small Motor Sequencing Controls
The Z86E4016VEG can manage ordered motor-start, run, stop, and fault logic in appliances, access mechanisms, and compact actuators. Its 16 MHz processing rate supports deterministic sequence timing, and 32 I/O lines allow the controller to monitor position or limit inputs while driving command outputs. The MCU does not directly power a motor; external transistor or driver stages must handle load current, inductive transients, and isolation. A 4.5 V to 5.5 V regulated supply, local bypass capacitance, defined reset behavior, and protective shutdown paths are essential for reliable operation.
Recommandé
Industrial Sensor and Switch Logic
The Z86E4016VEG can consolidate discrete sensor inputs, interlocks, and simple actuator decisions into a compact embedded-control module. Its 32 I/O lines reduce the need for additional I/O devices, while 4 KB of OTP memory accommodates fixed thresholds, debounce routines, diagnostics, and state-machine logic. The 236-byte RAM budget requires careful variable allocation, so measurements should be processed and discarded rather than accumulated. The 5 V-class operating range simplifies integration into regulated industrial control boards, but grounding, input filtering, surge protection, and separation from high-energy switching equipment require board-level attention.
Recommandé
Security and Access Control
The Z86E4016VEG can serve as the fixed-function controller in access-key, card-reader, or interlock products that require timed sequences and discrete input monitoring. Its 16 MHz core can execute keypad scans, debounce logic, relay-request handling, and diagnostic routines, while 32 I/O lines support sensors, indicators, and lock-related signals. OTP programming is appropriate for production units whose authorization or configuration logic need not be changed in the field. Designers should preserve a secure programming path, define safe outputs during reset and power loss, and validate external relay drivers and isolation requirements.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour Z86E4016VEG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | Z86E4016VEE | Z86E4016VEC |
|---|---|---|---|
| Brand | Zilog | Zilog | Zilog |
| Package | 44-pin LCC, 16.6 mm x 16.6 mm | 44-pin LCC | 44-pin LCC |
| Architecture | Z8 8-bit microcontroller | Z8 8-bit microcontroller | Z8 8-bit microcontroller |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz |
| Program Memory | 4 KB OTP | 4 KB OTP | 4 KB OTP |
| RAM | 236 bytes | 236 bytes | 236 bytes |
| I/O Lines | 32 lines | 32 lines | 32 lines |
| Operating Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Programmable OTP Options | RC oscillator, EPROM protect, auto-latch disable | RC oscillator, EPROM protect, auto-latch disable | RC oscillator, EPROM protect, auto-latch disable |
| Data Bus Width | 8 bit | 8 bit | 8 bit |
Principaux différenciateurs
- Combines 16 MHz control performance with 32 I/O lines (vs Z86E4016VEE)
- OTP architecture supports finalized one-time-programmed products (vs Z86E4016VEC)
- Compact LCC implementation exposes 32 I/O lines (vs Z86E4016VEE)
Notes de conception
Place the MCU, clock components, and decoupling capacitors close to their associated pins. Use a short, low-impedance supply path and connect the ground pins according to the manufacturer layout guidance. Because the target uses a 44-pin LCC with 32 I/O lines, preserve escape routing for every externally accessible signal and avoid routing high-current switching paths beneath the device. Confirm pad dimensions and pin numbering against the official LCC-44 drawing before fabrication.
Design the board around the documented 4.5 V to 5.5 V operating range rather than treating the MCU as a 3.3 V device. Verify startup, reset, and brownout behavior at the power-supply limits, and place local bypass capacitance at the supply pins using the capacitance and layout values specified by the manufacturer. Account for the current drawn by the MCU and external ports when sizing the 5 V regulator, while keeping radio-frequency or inductive loads on their own filtered supply paths.
Do not treat OTP program memory as rewritable flash. Validate the complete firmware image, memory usage, interrupt tables, and OTP configuration before programming production devices because an incorrect program cannot be corrected in the same way as a flash-based design. Also check the 236-byte RAM limit during firmware development. A build that exceeds available code space or RAM may appear to work in simulation but fail after OTP programming.
Keep clock routing short and isolate it from switching nodes and high-current outputs. If the RC-oscillator option is selected, follow the manufacturer's component and placement recommendations to achieve the intended timing tolerance. For switch, relay, or motor inputs, use appropriate filtering and protection rather than relying solely on software debounce. Keep external drivers away from sensitive MCU pins and provide a defined state for every output during reset and power loss.
Informations de conformité
RoHS compliance is stated in the LCSC product listing. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the exact Z86E4016VEG ordering code.