Zilog

Z86E4016VEG 16MHz 8-Bit OTP MCU | Zilog | 44-Pin LCC

부품 번호: Z86E4016VEG ✓ 활성
4.5 V to 5.5 V Vdss 44-pin LCC, 16.6 mm x 16.6 mm Package 16 MHz Speed 4 KB OTP (4K x 8 bits) Memory
MOQ: 1 |

Z86E4016VEG 개요

Zilog Z86E4016VEG is an 8-bit Z8 microcontroller with a 16 MHz operating frequency, 4 KB one-time-programmable memory, 236 bytes of RAM, and 32 I/O lines in a 44-pin plastic leaded chip carrier package. Its operating supply range is 4.5 V to 5.5 V. The device combines a conventional 8-bit CPU, OTP program memory, volatile data memory, and programmable I/O in a compact surface-mount package.

An 8-bit microcontroller is a compact control IC designed for embedded logic, sequencing, input monitoring, and output control. Within the embedded-control hierarchy, the Z86E4016VEG belongs to the Z8 family of 8-bit microcontrollers and uses one-time-programmable memory rather than mask-programmed ROM or rewritable flash. This architecture is suited to moderate-control tasks where firmware is written once and the completed product does not require in-circuit firmware updates.

The principal device characteristics include a 16 MHz clock, 4 KB or 4K x 8 bits of OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 4.5 V to 5.5 V supply range. The Z8 core provides the central processing, interrupt, timer, and I/O resources required for embedded control. Programmable OTP options shown in the device documentation include an RC oscillator, EPROM protection, and auto-latch disable, allowing the final configuration to be tailored to the product design.

The Z86E4016VEG is offered in a 44-pin LCC package measuring approximately 16.6 mm by 16.6 mm. Its relatively high pin count provides access to 32 I/O lines alongside control and power functions. Because the MCU operates from a narrow 5 V-class supply range, the board designer must account for the supply tolerance, startup behavior, oscillator requirements, and port loading of the selected implementation.

Typical uses include appliance and industrial control modules, keyboard or panel interfaces, simple motor-sequencing controllers, LED status and lighting controllers, and compact embedded products that require deterministic one-time-programmed control. The device is especially appropriate when program revisions are unnecessary and its 32 I/O lines, 236-byte RAM, and 16 MHz processing rate satisfy the control workload.

For PCB design, use the manufacturer pin-description table to assign every LCC-44 connection, provide the required clock and decoupling components, and keep sensitive input paths away from switching nodes. Confirm the selected package drawing, exposed programming method, and operating-temperature limits against the official datasheet before releasing a PCB.

This product page consolidates the core Z86E4016VEG specifications, package information, sourcing guidance, application context, and validated drop-in alternatives. The comparison and design notes focus on the decisions that materially affect firmware support, PCB reuse, I/O availability, and supply compatibility.

드롭인 대체품: Z86E4016VEG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

Z86E4016VEE

✅ 드롭인
📦 44-pin LCC
Same Z86E4016 family and 16 MHz architecture; suffix-specific temperature and qualification conditions require confirmation, while core memory and I/O ratings remain aligned

📋 참조 대체품 (카탈로그에 없음)

Z86E4016VEC

✅ 드롭인 ⚠️ 사양 미검증
📦 44-pin LCC
Same Z86E4016 family and 44-pin LCC class; suffix-specific temperature grade and qualification differ, with no change to the 16 MHz core or 4 KB OTP architecture

📋 참조 대체품 (카탈로그에 없음)

Z86E4016VEG 최대 정격 & 전기적 특성

Product Type 8-bit Z8 one-time-programmable microcontroller
최대 클록 주파수 16 MHz
데이터 버스 폭 8 bit
Program Memory 4 KB OTP (4K x 8 bits)
RAM 236 bytes
I/O Lines 32 lines
동작 공급 전압 4.5 V to 5.5 V
패키지 44-pin LCC, 16.6 mm x 16.6 mm
실장 유형 Surface mount
Programmable OTP Option RC oscillator supported
Programmable OTP Option EPROM protection supported
Programmable OTP Option Auto-latch disable supported
Memory Architecture One-time programmable ROM with RAM
Core / Architecture Z8 8-bit embedded-control core
RoHS 상태 compliant
Package Dimensions 16.6 mm x 16.6 mm
수명 주기 상태 Active
Programming Memory Type OTP

Z86E4016VEG 16.6 mm x 16.6 mm 핀 구성 가이드

Z86E4016VEG(16.6 mm x 16.6 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

Z86E4016VEG의 16.6 mm x 16.6 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: Z86E4016VEG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

Z86E4016VEG 적합 용도: 6 애플리케이션s: Appliance Control Modules, LED Lighting and Display Control, Keyboard and Panel Interfaces, Small Motor Sequencing Controls, Industrial Sensor and Switch Logic, Security and Access Control.

🏭

Appliance Control Modules

The Z86E4016VEG fits compact appliance-control boards that coordinate buttons, sensors, relays, and status indicators. Its 16 MHz Z8 core provides more than enough processing capability for sequential control logic, while 32 I/O lines allow multiple inputs and outputs to be connected without an external I/O expander. The 4 KB OTP program memory suits products whose firmware is finalized before production and never updated. With a 4.5 V to 5.5 V supply requirement, the design should use a regulated 5 V rail, local decoupling, and careful partitioning between sensitive inputs and switching loads.

💡

LED Lighting and Display Control

The Z86E4016VEG is well suited to LED matrix, signage, and status-display controllers where many outputs must be updated under deterministic timing. Its 32 I/O lines can distribute control signals among multiple LED banks, while the 16 MHz operating rate supports efficient multiplexed update routines. The 236 bytes of RAM provide workspace for display state and timing variables, and the 4 KB OTP memory accommodates a fixed lighting pattern or menu. Designers should budget output current separately, use suitable transistor or driver circuitry where the MCU port load is insufficient, and place the MCU away from high-current switching paths.

🔧

Keyboard and Panel Interfaces

A Z86E4016VEG-based panel controller can scan switches, encode user commands, debounce inputs, and drive indicator outputs in a compact 44-pin LCC footprint. The 32 available I/O lines provide ample connections for matrix scanning and control signals, while the 16 MHz Z8 core supports responsive polling and interrupt-driven operation. Because the MCU offers only 236 bytes of RAM, the firmware should use a compact state machine rather than buffering large amounts of input data. Pull-up or pull-down requirements and switch-contact behavior should be verified against the port characteristics in the manufacturer pin and electrical tables.

⚡

Small Motor Sequencing Controls

The Z86E4016VEG can manage ordered motor-start, run, stop, and fault logic in appliances, access mechanisms, and compact actuators. Its 16 MHz processing rate supports deterministic sequence timing, and 32 I/O lines allow the controller to monitor position or limit inputs while driving command outputs. The MCU does not directly power a motor; external transistor or driver stages must handle load current, inductive transients, and isolation. A 4.5 V to 5.5 V regulated supply, local bypass capacitance, defined reset behavior, and protective shutdown paths are essential for reliable operation.

🏭

Industrial Sensor and Switch Logic

The Z86E4016VEG can consolidate discrete sensor inputs, interlocks, and simple actuator decisions into a compact embedded-control module. Its 32 I/O lines reduce the need for additional I/O devices, while 4 KB of OTP memory accommodates fixed thresholds, debounce routines, diagnostics, and state-machine logic. The 236-byte RAM budget requires careful variable allocation, so measurements should be processed and discarded rather than accumulated. The 5 V-class operating range simplifies integration into regulated industrial control boards, but grounding, input filtering, surge protection, and separation from high-energy switching equipment require board-level attention.

🖥️

Security and Access Control

The Z86E4016VEG can serve as the fixed-function controller in access-key, card-reader, or interlock products that require timed sequences and discrete input monitoring. Its 16 MHz core can execute keypad scans, debounce logic, relay-request handling, and diagnostic routines, while 32 I/O lines support sensors, indicators, and lock-related signals. OTP programming is appropriate for production units whose authorization or configuration logic need not be changed in the field. Designers should preserve a secure programming path, define safe outputs during reset and power loss, and validate external relay drivers and isolation requirements.

추천 제품 요약

Z86E4016VEE Same-family Z8 controller for appliance sequencing 사용처: Appliance Control Modules, LED Lighting and Display Control, Keyboard and Panel Interfaces, Small Motor Sequencing Controls, Industrial Sensor and Switch Logic, Security and Access Control Z86E4016VEC Same-family Z8 controller alternative 사용처: Appliance Control Modules, LED Lighting and Display Control, Keyboard and Panel Interfaces, Small Motor Sequencing Controls, Industrial Sensor and Switch Logic, Security and Access Control
What is the Z86E4016VEG?
The Z86E4016VEG is an active Zilog Z8 8-bit microcontroller operating at up to 16 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 I/O lines. It is packaged in a 44-pin LCC measuring approximately 16.6 mm by 16.6 mm and operates from 4.5 V to 5.5 V. According to the DigiKey product listing, it is an OTP-based Z8 microcontroller.
What are the key specifications of Z86E4016VEG that engineers should know?
The Z86E4016VEG combines an 8-bit Z8 core, 16 MHz maximum operating frequency, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 4.5 V to 5.5 V supply range in a 44-pin LCC. The device listing also identifies programmable OTP options for an RC oscillator, EPROM protection, and auto-latch disable. These parameters define the MCU's suitability for compact embedded-control and one-time-programmed products.
Where to buy Z86E4016VEG online?
Use the Request a Quote form on this page to request Z86E4016VEG pricing, stock confirmation, and delivery information. The exact ordering code is Z86E4016VEG, so any inquiry should identify that full MPN and the 44-pin LCC package. The manufacturer spelling is Zilog, and requests should also state the required quantity and whether reels, trays, or another approved delivery format are acceptable.
What is the price of Z86E4016VEG?
The current Z86E4016VEG price is available through the Request a Quote form on this page. Submit the exact MPN, quantity, and required delivery format so the quote can reflect the appropriate order quantity and packaging. The product is a 44-pin LCC, 16 MHz, 4 KB OTP microcontroller; avoid requesting a quote for a differently packaged or temperature-rated variant unless that variant is intended.
What is the lead time for Z86E4016VEG?
Request the current Z86E4016VEG lead time through the Request a Quote form on this page. Include the planned order quantity, delivery location, and acceptable packaging format. Because this is a 4 KB OTP MCU in a 44-pin LCC, the inquiry should reproduce the complete suffix VEG to prevent confusion with related Z86E4016 devices in other package or temperature configurations.
Is Z86E4016VEG in stock?
Stock for Z86E4016VEG should be confirmed through the Request a Quote form on this page. The manufacturer lists the Z86E4016 family as active, but active lifecycle status does not by itself establish a current stock quantity for the exact VEG ordering code. State your required quantity and packaging preference so the returned quotation can confirm availability for that specific 44-pin LCC configuration.
Where to download the Z86E4016VEG datasheet PDF?
Use the manufacturer datasheet linked from the official Z86E4016 product documentation when available, and verify that the document identifies the Z86E4016 family and the VEG package suffix. The package and pin-description table are essential for assigning the 44 LCC connections. No official manufacturer PDF URL is established in the current product record, so use the Zilog product documentation rather than relying on a generic cross-reference page.
Where to find the Z86E4016VEG pinout?
Find the Z86E4016VEG pinout in the manufacturer's LCC-44 pin-description table and package drawing. The device has 32 I/O lines in a 44-pin package, with the remaining pins assigned to power, ground, clock, reset, and other control functions. Do not infer individual pin names from the pin count alone; cross-check every connection against the official pin table and the selected package outline.
What is the difference between Z86E4016VEG and Z86E4016VEE?
Z86E4016VEG is the 16 MHz, 4 KB OTP Z8 MCU supplied in the 44-pin LCC configuration identified by the target ordering code. Z86E4016VEE belongs to the same Z86E4016 family and appears in the available family documentation, but its exact suffix-specific electrical and commercial conditions must be checked before substitution. Confirm pinout, temperature grade, supply limits, and programming requirements in the manufacturer data for each exact MPN.
Z86E4016VEG vs Z86E4016VEE - which is better for a legacy control board?
Choose Z86E4016VEG when the board specifically requires the VEG ordering code, 44-pin LCC footprint, 16 MHz speed, 4 KB OTP memory, and 236 bytes of RAM. Consider Z86E4016VEE only after verifying that its suffix-specific temperature rating, electrical limits, and pin configuration satisfy the design. For an existing PCB, the package and pin-to-pin compatibility take priority over functional similarity.
When should I choose Z86E4016VEG over another 8-bit microcontroller?
Choose Z86E4016VEG when the product requires a 16 MHz Z8 controller, 4 KB of OTP program memory, 236 bytes of RAM, 32 I/O lines, a 4.5 V to 5.5 V supply, and a 44-pin LCC footprint. It is particularly suitable for finished products whose firmware will not be updated. Choose another MCU if the design needs flash reprogramming, substantially more memory, lower voltage operation, or a different package.
Is Z86E4016VEG suitable for an embedded control application?
The Z86E4016VEG is suitable for compact embedded-control applications that fit within 4 KB of OTP code, 236 bytes of RAM, and 32 I/O lines. Its 16 MHz Z8 core supports deterministic sequencing, input reading, and output control at a 4.5 V to 5.5 V supply. Validate the complete firmware size, interrupt requirements, timer resources, and peripheral configuration before committing the design.
What can replace Z86E4016VEG?
A replacement for Z86E4016VEG must use the same 44-pin LCC footprint, preserve the 4.5 V to 5.5 V supply compatibility, and provide adequate program memory, RAM, I/O, and timing performance. Z86E4016VEE is a documented same-family candidate, but its exact suffix-specific conditions require verification. A functionally similar MCU with another package is not a drop-in replacement and would require PCB changes.
Can Z86E4016VEE replace Z86E4016VEG?
Z86E4016VEE can be considered for replacement only after confirming identical LCC-44 pin assignment, electrical limits, temperature grade, clock behavior, OTP programming method, and firmware compatibility. Both parts are members of the Z86E4016 family, but family membership alone does not establish drop-in interchangeability. Confirm the exact suffix requirements and obtain manufacturer guidance before changing a released design.
Is Z86E4016VEG the same as Z86E4016VEE?
No, Z86E4016VEG and Z86E4016VEE are distinct ordering codes even though they belong to the same Z86E4016 controller family. Their suffix-specific conditions must be compared in the manufacturer documentation. The target VEG device is specified at 16 MHz, with 4 KB OTP, 236 bytes of RAM, 32 I/O lines, and a 44-pin LCC operating from 4.5 V to 5.5 V.
What is the best Zilog equivalent for Z86E4016VEG?
The closest documented Zilog-family starting point is Z86E4016VEE, because it belongs to the same Z86E4016 MCU family. It should not be treated as an automatic drop-in until its LCC-44 pinout, temperature rating, electrical limits, and OTP configuration are confirmed against the manufacturer documentation. Functional equivalence, package compatibility, and firmware compatibility are separate acceptance criteria.
What tooling is needed to program Z86E4016VEG?
Use the programming method and compatible development hardware specified for the Z86E4016 family by Zilog. Because the target contains one-time-programmable memory, the device cannot be rewritten like a flash MCU, making programming setup and code validation especially important. The programmable options include an RC oscillator, EPROM protection, and auto-latch disable. Confirm the exact fuse or OTP configuration and programming fixture requirements before production.
Is Z86E4016VEG RoHS compliant?
Yes, the LCSC product listing identifies Z86E4016VEG as RoHS compliant. The listing also describes the device as a 4 KB OTP, 32-I/O, 16 MHz microcontroller in an LCC-44 package operating from 4.5 V to 5.5 V. RoHS compliance does not replace project-specific checks for REACH, conflict-minerals declarations, halogen-free status, or AEC-Q100 suitability where those requirements apply.

엔지니어링 참조 데이터: Z86E4016VEG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose Z86E4016VEG for a production design that specifically requires the VEG ordering code, a 16 MHz Z8 core, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, a 4.5 V to 5.5 V supply, and a 44-pin LCC footprint. Z86E4016VEE is the closest documented same-family candidate and may be preferable when its suffix-specific temperature and qualification conditions better fit the project, subject to manufacturer confirmation. Z86E4016VEC is another family candidate whose exact suffix conditions require verification. Do not substitute a MCU merely because it is also an 8-bit controller: package geometry, pin assignment, memory size, oscillator behavior, OTP programming, and electrical limits must all align. If the product needs field-updatable firmware, substantially more RAM, or a different supply voltage, select a flash-based MCU and redesign the PCB instead.

대체품과의 비교

파라미터 이 제품 Z86E4016VEE Z86E4016VEC
Brand Zilog Zilog Zilog
Package 44-pin LCC, 16.6 mm x 16.6 mm 44-pin LCC 44-pin LCC
Architecture Z8 8-bit microcontroller Z8 8-bit microcontroller Z8 8-bit microcontroller
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz
Program Memory 4 KB OTP 4 KB OTP 4 KB OTP
RAM 236 bytes 236 bytes 236 bytes
I/O Lines 32 lines 32 lines 32 lines
Operating Supply Voltage 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Programmable OTP Options RC oscillator, EPROM protect, auto-latch disable RC oscillator, EPROM protect, auto-latch disable RC oscillator, EPROM protect, auto-latch disable
Data Bus Width 8 bit 8 bit 8 bit

주요 차별점

  • Combines 16 MHz control performance with 32 I/O lines (vs Z86E4016VEE)
  • OTP architecture supports finalized one-time-programmed products (vs Z86E4016VEC)
  • Compact LCC implementation exposes 32 I/O lines (vs Z86E4016VEE)

설계 노트

Place the MCU, clock components, and decoupling capacitors close to their associated pins. Use a short, low-impedance supply path and connect the ground pins according to the manufacturer layout guidance. Because the target uses a 44-pin LCC with 32 I/O lines, preserve escape routing for every externally accessible signal and avoid routing high-current switching paths beneath the device. Confirm pad dimensions and pin numbering against the official LCC-44 drawing before fabrication.

Design the board around the documented 4.5 V to 5.5 V operating range rather than treating the MCU as a 3.3 V device. Verify startup, reset, and brownout behavior at the power-supply limits, and place local bypass capacitance at the supply pins using the capacitance and layout values specified by the manufacturer. Account for the current drawn by the MCU and external ports when sizing the 5 V regulator, while keeping radio-frequency or inductive loads on their own filtered supply paths.

Do not treat OTP program memory as rewritable flash. Validate the complete firmware image, memory usage, interrupt tables, and OTP configuration before programming production devices because an incorrect program cannot be corrected in the same way as a flash-based design. Also check the 236-byte RAM limit during firmware development. A build that exceeds available code space or RAM may appear to work in simulation but fail after OTP programming.

Keep clock routing short and isolate it from switching nodes and high-current outputs. If the RC-oscillator option is selected, follow the manufacturer's component and placement recommendations to achieve the intended timing tolerance. For switch, relay, or motor inputs, use appropriate filtering and protection rather than relying solely on software debounce. Keep external drivers away from sensitive MCU pins and provide a defined state for every output during reset and power loss.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS compliance is stated in the LCSC product listing. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the exact Z86E4016VEG ordering code.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

Z86E4016VEG datasheet Z86E4016VEG specifications Z86E4016VEG pinout Z86E4016VEG datasheet pdf Z86E4016 16MHz microcontroller Z86E4016 4KB OTP MCU Z86E4016 LCC-44 pinout Z86E4016VEG equivalent Z86E4016VEG replacement Z86E4016VEG vs Z86E4016VEE Zilog Z86E4016VEG Z86E4016VEG price Z86E4016VEG stock Z86E4016 application circuit Z86E4016 32 I/O microcontroller

관련 부품 & 용어

Zilog Z86E4016VEG Z86E4016 Z86E4016VEE Z86E4016VEC Z8 8-bit microcontroller embedded microcontroller one-time programmable memory OTP 4 KB program memory 236 bytes RAM 32 I/O lines 16 MHz clock 4.5 V to 5.5 V supply LCC-44 plastic leaded chip carrier surface-mount package RC oscillator EPROM protection auto-latch disable RoHS appliance control LED lighting control panel interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기