מוצרים (44,000+)

PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1737E/2K

PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1737E/2K is a 24-bit, 192 kHz sampling stereo audio digital-to-analog converter with 106 dB signal-to-noise ratio, housed in a 28-pin SSOP package. The /2K ordering suffix specifies a 2000-piece tape-and-reel shipment, making the device suitable for high-volume automated production. An audio DAC is a mixed-signal semiconductor that converts digital audio samples into an analog voltage suitable for driving an audio output stage. In the broader hierarchy, PCM1737E/2K belongs to the digital-to-analog converter class within interface ICs, which sits within the broader semiconductor and signal-conversion product categories. Its role is to reconstruct left and right audio channels from digital words received from an audio processor, digital audio receiver, or other digital source. The converter supports 24-bit digital audio data at a maximum sampling rate of 192 kHz. Listings also identify I2S-compatible operation and the enhanced multi-level delta-sigma architecture. The 106 dB SNR rating describes the signal-to-noise performance of the analog output stage, while the 192 kHz capability permits high-resolution playback of lossless PCM material and compatibility with professional 48 kHz, 96 kHz, and 192 kHz workflows. The PCM1737 uses separate analog and digital supply domains, allowing the system designer to manage analog and digital power rails independently. Independent rail management can reduce ground-current interaction between switching circuitry and the sensitive analog output section. The SSOP package provides a compact 28-pin implementation, although its lead pitch requires careful assembly planning and adequate spacing between neighboring components. Typical uses include network audio receivers, home-theater audio processors, CD and DVD players, digital mixing consoles, active speakers, soundbar signal paths, and multi-channel audio equipment. The 24-bit resolution and 192 kHz sampling rate are particularly useful when the product must accept high-rate I2S audio from a digital audio host while preserving a compact stereo output stage. When laying out the board, route the digital I2S signals away from the analog outputs and place analog filtering components close to the output pins. Keep switching-regulator inductors and high-current digital paths on the opposite side of the board where practical. Use a clean analog ground strategy, minimize loop area around the DAC and its output network, and follow the manufacturer reference layout for power, ground, and decoupling connections. This page combines the manufacturer device information with package, ordering, interface, and replacement guidance. It identifies genuine same-footprint choices while highlighting the differences that must be checked before substituting an audio converter in a finished design.

RFQ צור קשר
PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI
PCM1737EG4

PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI

The Texas Instruments PCM1737EG4 is a 24-bit stereo digital-to-analog converter with a 192 kHz sampling-rate capability, packaged in a 28-SSOP. The PCM1737EG4 belongs to the broader digital-to-analog converter hierarchy, where it converts digital audio data into left- and right-channel analog signals for audio reproduction, mixing, and signal-processing equipment. A digital-to-analog converter, or DAC, reconstructs continuous analog waveforms from coded digital samples. Audio-capable DACs combine a multibit conversion core with digital audio interfaces, clocking, filtering, and output circuitry. The PCM1737EG4 is designed for stereo audio conversion where a compact surface-mount package, 24-bit resolution, and high-rate operation are important. The principal identified features of PCM1737EG4 are 24-bit resolution, operation up to 192 kHz, and a 28-SSOP package. One product description identifies the converter as a 96 kHz stereo DAC, while another identifies the family as supporting 192 kHz sampling. Engineers should therefore use the PCM1737EG4 manufacturer datasheet for the exact supported data and clock-rate modes of the installed device. The 28-SSOP package uses gull-wing leads and a stated width of 5.30 mm, making it suitable for conventional surface-mount PCB assembly. Its commercial temperature grade and digital audio conversion function distinguish it from general-purpose analog-to-digital converters and from lower-resolution legacy audio interfaces. Typical uses include stereo audio digital-to-analog conversion, multimedia playback, active speaker systems, digital mixing consoles, and embedded audio equipment. In each case, the device can receive digital audio samples and provide differential or single-ended analog outputs according to the interface and output configuration specified by the manufacturer. PCB design should preserve clean analog and digital separation, provide a low-impedance return path for all supply and ground pins, and place input and output capacitors close to their associated pins. Clock and data traces should be routed away from analog output nodes to reduce jitter pickup and unwanted coupling. This page combines the verified PCM1737EG4 package, format, sampling-rate, and commercial-grade information with component comparisons, sourcing guidance, and practical integration notes. It also distinguishes confirmed pin-compatible options from alternatives that require changes to the PCB or audio interface.

RFQ צור קשר
PCM1738E - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments
PCM1738E

PCM1738E - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1738E is a 24-bit stereo audio digital-to-analog converter (DAC) supporting sampling rates up to 200 kHz in a 28-pin SSOP package. The device uses CMOS monolithic integrated-circuit technology and an advanced segment DAC architecture designed for high-performance audio and multimedia signal conversion. According to the Texas Instruments PCM1738 product page, the converter includes two stereo DAC channels, support circuitry, and balanced current outputs. The balanced-output architecture allows the converter to drive external audio stages through an appropriate output network. The PCM1738E is supplied in the 28-SSOP package, matching the PCM1738 family identified by DigiKey and Mouser. The converter operates from a single 4.75 V to 5.25 V supply according to the verified distributor data, and the PCM1738 family is specified for 192-kHz sampling in the manufacturer product description. Its advanced segment DAC architecture is intended to provide excellent dynamic performance and improved tolerance to clock jitter, making the device useful in digital audio equipment, multimedia systems, and other applications requiring accurate stereo reconstruction. The PCM1738E is also associated with the PCM1738E/2K ordering code shown in the verified distributor data; the /2K designation is an ordering/package-related identifier rather than a separate functional variant. When selecting the device, engineers should confirm the complete clock, digital-interface, analog-output, and power-supply requirements against the manufacturer datasheet. The PCM1738E is intended for designs requiring a high-resolution stereo DAC rather than a low-cost consumer-output codec.

RFQ צור קשר
PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI
PCM1738E/2K

PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI

Texas Instruments PCM1738E/2K is a 24-bit stereo digital-to-analog converter with a 192 kHz sampling rate, housed in a 28-pin SSOP (DB) package. It uses advanced-segment DAC architecture to deliver 117 dB signal-to-noise ratio and balanced current outputs for high-performance audio signal chains. The device supports digital audio data transfer through a serial interface and is designed for applications requiring precise stereo conversion. An audio DAC is a data converter that transforms digital audio samples into analog voltage or current signals for downstream amplification, filtering, mixing, or line output. The PCM1738 belongs to the digital-to-analog converter category, within the broader ADC/DAC and signal-conversion semiconductor hierarchy. Its stereo architecture converts two audio channels, while the balanced current outputs provide a flexible foundation for analog output stages. Key features include 24-bit resolution, operation up to 192 kHz, 117 dB SNR, advanced-segment conversion architecture, and balanced current outputs. The 192 kHz capability accommodates high-resolution source material, while 24-bit word length preserves fine amplitude detail. The 117 dB SNR rating describes the converter's signal-to-noise performance, making the device suitable for premium consumer audio, professional playback, and other applications where low-level analog signals must remain distinguishable from system noise. Internally, the converter employs a delta-sigma-based architecture, a common approach in high-resolution audio DACs because it supports high linearity, digital noise shaping, and flexible clocking. The advanced-segment architecture is intended to improve dynamic performance and clock-jitter tolerance. A serial three-wire interface reduces the number of required digital connections, while the stereo current-output topology gives the board designer control over the final analog signal path. Typical uses include high-resolution stereo playback, CD and DVD audio systems, digital mixing consoles, professional monitor controllers, and multichannel audio equipment requiring accurate conversion of separate left and right channels. The balanced current outputs can feed an appropriate current-to-voltage and reconstruction network or a downstream audio amplifier stage. Board-level implementation still depends on the clock source, digital interface, output topology, and filtering specified by the manufacturer. A critical design consideration is to follow the manufacturer datasheet for clock requirements, analog output components, decoupling, and printed-circuit-board layout. Keep digital-clock and sensitive analog routing separated, place decoupling capacitors close to the supply pins, and use a symmetrical output network to minimize channel mismatch. The exact footprint, exposed connections, and analog output implementation should be verified against the device's package drawing before layout is released.

RFQ צור קשר
PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1738EG4

PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1738EG4 is a 24-bit stereo audio digital-to-analog converter DAC with a sampling rate of up to 192 kHz, housed in a 28-pin SSOP package. The device uses a two-channel delta-sigma architecture and a serial three-wire digital audio interface for compact audio signal-processing designs. An audio DAC is a data converter that transforms digital audio samples into analog voltage signals suitable for amplification, headphone drive, line output, or further signal conditioning. The PCM1738 belongs to the DAC and audio converter hierarchy within integrated circuits, where precision sample reconstruction and low-noise analog output are central requirements. Key features of the PCM1738EG4 include 24-bit resolution, stereo operation, support for serial digital audio data, and operation from a 4.75 V to 5.25 V supply range. Its 28-SSOP package, identified as 0.209 inch or 5.30 mm wide in the component listing, supports compact surface-mount layouts. The EG4 suffix denotes the tape-and-reel ordering configuration. The converter uses a delta-sigma architecture to provide high-resolution digital audio reconstruction. The serial interface reduces the number of interconnects required when the DAC is connected to an audio codec, digital signal processor, USB audio interface, or embedded audio controller. This makes the device suitable for structured multichannel audio systems where channel synchronization and compact implementation are important. Typical applications include consumer audio equipment, digital mixing consoles, active speakers, multimedia systems, and embedded audio platforms. The 192 kHz sampling-rate capability supports high-resolution audio workflows, while the 24-bit data width provides a 16,777,216-level representation for each digital sample. The primary design consideration is correct implementation of the digital interface, analog output filtering, power-supply decoupling, and signal routing. Keep analog and digital return paths separated as far as practical, place bypass capacitors close to the supply pins, and follow the manufacturer datasheet when selecting external filter components. Verify the exact pin assignments and recommended application circuit before PCB release.

RFQ צור קשר
PCM1739E - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments
PCM1739E

PCM1739E - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1739E is a 24-bit, 192kHz sampling enhanced multi-level delta-sigma stereo digital-to-analog converter with 105dB typical signal-to-noise ratio, supplied in a 28-pin SSOP package. It converts two digital audio channels into left and right analog outputs and uses SoundPlus technology for high-fidelity playback systems. A digital-to-analog converter, or DAC, is a semiconductor that transforms digital audio samples into continuous analog voltage signals. In the signal-chain hierarchy, the PCM1739E belongs to the ADC/DAC class within interface ICs, where it follows the digital audio source and precedes an analog output amplifier, headphone driver, mixer, or loudspeaker system. Its delta-sigma architecture and multi-level quantization are intended to reduce quantization noise while preserving high-resolution audio data. The verified product information identifies a 24-bit resolution, maximum sampling rate of 192kHz, 105dB typical SNR, and stereo output configuration. A related manufacturer datasheet listing gives 106dB typical dynamic range, 105dB typical SNR, 0.0015% typical THD+N with a 5V supply, 3.1Vpk-pk typical full-scale output, 4-times and 8-times oversampling, a 0.454fS digital-filter passband, and -82dB stopband attenuation. PCM1739E is appropriate for consumer-audio equipment, USB and digital-audio interface boards, active speakers, compact home-theater systems, and audio conversion modules requiring simultaneous left and right outputs. Its 192kHz sampling capability supports high-resolution source material, while the stated SNR and distortion figures establish the signal-quality baseline for the analog output stage. Designers should treat the DAC output as a line-level signal requiring suitable analog amplification and output coupling. The manufacturer datasheet indicates analog testing with a load of 5kΩ or larger and an AC-coupled output. Decoupling, grounding, clock-interface layout, and output-filter implementation therefore remain important to preserving the converter's measured performance. This page combines the verified Texas Instruments product information, distributor listings, and cross-reference data with practical selection guidance. It also distinguishes documented drop-in candidates from merely similar audio converters, helping engineers evaluate replacement risk before modifying an existing 28-pin SSOP PCB.

RFQ צור קשר
PCM1739EG4 - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1739EG4

PCM1739EG4 - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1739EG4 is a 24-bit, 192kHz sampling stereo digital-to-analog converter with 105dB signal-to-noise ratio in a 28-pin SSOP package. It accepts I2S audio data and uses a multi-level delta-sigma architecture to produce two analog output channels. A DAC is a semiconductor that converts digital audio samples into proportional analog voltages for amplification and loudspeaker drive. PCM1739 belongs to the delta-sigma DAC family within the broader audio converter hierarchy, where resolution determines numerical sample detail while the sampling rate controls the highest reproducible audio bandwidth. The PCM1739EG4 supports 24-bit audio at up to 192kHz and provides two output channels for stereo audio equipment. Its 105dB SNR specification indicates a low-noise conversion path, while the multi-level architecture reduces quantization-related distortion. The 28-pin SSOP package supports conventional surface-mount assembly, although the narrow lead pitch requires careful PCB layout and inspection. PCM1739EG4 is designed for digital audio systems that need both high sample-rate support and low-noise analog conversion. Its I2S interface makes it suitable for systems using a digital audio processor, USB audio interface, Blu-ray player, game console, or home-audio controller. Stereo outputs support left and right channels for consumer and professional listening equipment. Typical uses include high-resolution network players, USB audio interfaces, CD and DVD players, digital mixing consoles, surround-sound processors, and audio evaluation boards. The 192kHz capability is useful for native high-resolution source material, while the 105dB SNR supports quiet passages and low-level musical details. Designers should treat this converter as a precision analog component. Use the digital interface timing and analog output filtering guidance in the manufacturer datasheet, maintain short return paths for the analog outputs, and provide stable reference and power connections. Tube packaging is identified by the G4 ordering code, so production planning should include appropriate handling and incoming inspection. This product page consolidates the key electrical and packaging characteristics, practical application guidance, verified lifecycle information, and pin-compatible replacement analysis to support faster component selection and PCB design.

RFQ צור קשר
PCM1740E - 24-Bit 96kHz Stereo DAC with PLL | Texas Instruments
PCM1740E

PCM1740E - 24-Bit 96kHz Stereo DAC with PLL | Texas Instruments

The Texas Instruments PCM1740E is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, an on-chip phase-locked loop, and a voltage-controlled crystal oscillator in a 24-pin SSOP package. It accepts I2S digital audio and is designed primarily for set-top box playback systems requiring a stable 27 MHz master clock and support for multiple sampling rates. An audio DAC is a signal-conversion integrated circuit that transforms digital PCM audio samples into left and right analog voltage signals for subsequent low-pass filtering and line-level amplification. Within the product hierarchy, PCM1740E is an audio DAC, a digital-to-analog converter, a data converter IC, and a semiconductor designed for digital audio playback. The PCM1740E combines a multibit delta-sigma stereo DAC with an integrated PLL and VCXO. Its 24-bit interface supports sampling rates up to 96 kHz, while the VCXO supplies a precision-tunable 27 MHz clock source. Integrating these functions reduces the need for a separate clock-generation circuit in systems where the DAC must support multiple audio-sampling frequencies. The converter is intended for consumer audio equipment, particularly set-top boxes and similar digital playback products. Digital input is accepted through a serial audio interface, and the converter generates stereo analog outputs suitable for an analog reconstruction filter and line-output stage. Its architecture prioritizes integration, clock control, and compact implementation rather than a separately adjustable analog output architecture. Typical uses include cable or satellite set-top boxes, digital audio playback modules, stereo audio source equipment, and embedded consumer systems accepting I2S data. In these systems, the integrated PLL can support sampling-rate adaptation while the VCXO provides the specified clock foundation for stable digital-to-analog conversion. Designers should follow the manufacturer's recommended input, output, clock, filtering, decoupling, and layout arrangements. The complete 24-pin pinout and detailed electrical limits are not present in the supplied search extracts, so this page does not infer pin assignments or unverified analog-output values. Confirm the latest manufacturer datasheet before final routing and impedance selection. This page consolidates manufacturer descriptions, distributor availability, package information, and verified cross-reference results. It also distinguishes confirmed drop-in candidates from broader functional equivalents so engineers can make sourcing and PCB-compatibility decisions without treating similar audio converters as automatically interchangeable.

RFQ צור קשר
PCM1741E - Stereo 24-Bit Audio DAC | Texas Instruments
PCM1741E

PCM1741E - Stereo 24-Bit Audio DAC | Texas Instruments

The Texas Instruments PCM1741E is a stereo 24-bit audio digital-to-analog converter with a 2.7 V to 3.6 V supply range, 100 kHz sampling-rate capability, and an I2S-compatible digital interface. The device is packaged in a surface-mount SSOP-16 package. It combines two DAC channels and support circuitry in one CMOS monolithic IC for compact digital audio playback systems. An audio DAC is a data-converter IC that converts digital audio samples into analog voltage signals suitable for headphone, line-level, or downstream power-amplifier stages. In the electronic-component hierarchy, the PCM1741E is an audio DAC, a digital-to-analog converter, a data-converter IC, and a member of the broader semiconductor and signal-processing device categories. Its stereo architecture supports two audio channels while reducing the number of separate converter packages required. The PCM1741E uses Texas Instruments’ enhanced multilevel delta-sigma architecture. The converter architecture employs fourth-order noise shaping and 8-level amplitude quantization to provide excellent dynamic performance and improved tolerance. The verified distributor data identifies the resolution as 24 bits, the interface as I2S, the channel count as two, and the maximum sampling rate as 100 kHz. Its operating temperature range is -25°C to +85°C. A 2.7 V to 3.6 V single-supply operating range supports low-voltage portable and embedded audio designs. The PCM1741E accepts both analog and digital supply connections, and the digital interface enables connection to an audio codec, processor, digital audio transceiver, or other source capable of supplying the required I2S data. Exact clock, output-filter, analog-output, and absolute-noise specifications not exposed by the verified search data remain marked as data needed rather than being inferred. Typical applications include portable digital audio players, compact consumer-audio equipment, multimedia terminals, USB or network audio accessories, and other stereo playback systems operating from a 3.3 V rail. The 24-bit resolution and 100 kHz sampling capability suit digital audio paths where compactness and integrated stereo conversion are important. A suitable headroom amplifier, reconstruction filter, and output-routing network are still required where the analog output must drive a higher-power load. The primary design consideration is analog-output implementation. The PCM1741E is a converter, not a power amplifier, so its output network must be designed around the verified interface and application requirements. Layout should separate sensitive analog routing from digital clock and data paths, use a low-noise 3.3 V supply, and follow the manufacturer datasheet for bypassing and output filtering once those circuit details are available. This product page consolidates the verified manufacturer, distributor, pricing, package, interface, channel-count, and resolution information. It also identifies pin-compatible family alternatives, highlights missing technical fields explicitly, and provides selection and design guidance beyond the basic distributor listing.

RFQ צור קשר
PCM1742E - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1742E

PCM1742E - 24-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1742E is a CMOS monolithic stereo digital-to-analog converter with 24-bit resolution, support for sampling rates up to 200 kHz, an I2S digital audio interface, and a 16-pin SSOP package. The integrated converter uses an enhanced multilevel delta-sigma architecture with fourth-order noise shaping and 8-level amplitude quantization to provide high dynamic performance for audio signal chains. An audio DAC is a mixed-signal semiconductor that converts digital audio samples into continuous analog voltage signals suitable for amplifiers, speakers, headphones, or audio-capture equipment. The PCM1742E belongs to the broader DAC, data-converter, and signal-processing IC hierarchy. Its stereo topology integrates two converter channels and associated support circuitry, reducing the component count required for a conventional two-channel audio output stage. Key features include 24-bit conversion, 200 kHz sampling support as listed by DigiKey, 192 kHz sampling support in the linked datasheet description, fourth-order noise shaping, and 8-level amplitude quantization. The I2S interface supports connection to digital audio processors, while the 16-pin SSOP package provides a compact surface-mount option. The listed operating temperature is -25°C to 85°C. The enhanced multilevel delta-sigma architecture is central to the PCM1742E's performance. Noise shaping moves quantization noise away from the most perceptually important audio band, while multilevel quantization reduces the demands placed on the internal digital-to-analog conversion process. These techniques support improved dynamic performance and tolerance to clock and implementation variation compared with simpler first-order delta-sigma converters. Typical uses include consumer and professional digital audio equipment, powered speakers, audio network endpoints, test and measurement equipment, and embedded systems that require a stereo I2S-to-analog conversion stage. The device is also suitable for prototypes that need a compact two-channel DAC without a separate external converter for each output. Designers should provide suitable analog and digital supply decoupling, connect the I2S clock and data signals correctly, and account for output filtering when evaluating the analog signal path. The available verified data does not include a complete pin table, recommended external component values, or a verified unit price, so those details require confirmation in the manufacturer datasheet before layout and sourcing decisions. This page combines verified manufacturer and distributor specifications, verified-source limitations, package information, pricing availability, and replacement guidance with practical application and design notes. It distinguishes documented drop-in-family options from parts that may require board-level changes, helping engineers evaluate the PCM1742E without treating generic cross-reference results as guaranteed pin compatibility.

RFQ צור קשר
PCM1742E/2K - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments
PCM1742E/2K

PCM1742E/2K - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1742E/2K is a stereo 24-bit audio digital-to-analog converter featuring a 192 kHz maximum sampling rate, an I2S-compatible digital audio interface, programmable gain, digital filtering, and an SSOP-16 package. The converter uses enhanced multilevel delta-sigma architecture with fourth-order noise shaping and 8-level amplitude quantization to achieve strong dynamic performance while improving tolerance to clock jitter. An audio digital-to-analog converter, or DAC, translates digital audio samples into an analog voltage that can drive amplifiers, mixers, headphones, or line-level equipment. The PCM1742 belongs to the broader DAC -> audio converter -> signal-conversion IC -> semiconductor hierarchy. It is intended for applications requiring higher resolution and sampling capability than conventional CD-audio converters while retaining a simple, low-power CMOS implementation. The PCM1742E/2K provides 24-bit resolution and supports sampling rates up to 192 kHz. Its enhanced multilevel delta-sigma conversion architecture uses fourth-order noise shaping and 8-level amplitude quantization. Programmable gain and digital filtering give the system designer control over signal scaling and the conversion-characteristics filtering path. The PCM1742E version is specified for 100 dB typical dynamic range and SNR under the stated +5 V analog-supply condition. Digital timing is an important architectural consideration because the converter’s performance depends on a stable master clock and correctly synchronized serial data, clock, and latch signals. The I2S-compatible interface supports integration into digital audio equipment, while the internal digital filtering shapes quantization noise and reduces the need for extensive external analog reconstruction filtering. Typical uses include professional audio equipment, digital mixers, sound-card and USB-audio subsystems, high-resolution playback platforms, multichannel audio appliances, and test or measurement systems requiring balanced resolution and sampling performance. The converter is also appropriate when a compact SSOP-16 implementation is preferable to a large discrete DAC architecture. Designers should pay particular attention to analog and digital supply decoupling, the master-clock source, interface voltage compatibility, and the output filtering or amplifier interface. The analog output network must be designed around the converter’s output characteristics and intended load. PCB signal placement should keep clock and data traces short, while ground and supply returns should follow the layout guidance in the manufacturer datasheet. This product page combines manufacturer specifications, package information, pin-compatible family options, and practical implementation considerations. It also distinguishes electrically meaningful alternatives from ordinary ordering or packing variations so engineers can assess replacement options before changing an audio-board design.

RFQ צור קשר
PCM1742KE - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments
PCM1742KE

PCM1742KE - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1742KE is a 24-bit, 200 kHz stereo audio digital-to-analog converter with an I2S digital interface, monolithic CMOS construction, and a 16-pin SSOP package. It combines two converter channels with support circuitry in one compact device for digital-to-analog signal conversion. The converter uses enhanced multilevel delta-sigma architecture with fourth-order noise shaping and 8-level amplitude quantization to support high-resolution audio playback. An audio DAC is a mixed-signal interface that converts digital audio samples into left and right analog voltage signals. Within the broader signal-chain hierarchy, it sits after a digital audio source, decoder, mixer, or host processor and before an analog output amplifier and loudspeaker or line-level destination. The PCM1742KE is therefore a precision audio DAC rather than a digital input device, codec, or power-management component. Its stereo architecture allows both channels to be processed in one integrated circuit. Key features include 24-bit resolution, operation up to 200 kHz, an I2S-compatible digital interface, and a dual-channel converter arrangement. The enhanced multilevel delta-sigma design applies fourth-order noise shaping and 8-level amplitude quantization, combining noise suppression with a relatively compact CMOS implementation. These characteristics suit digital audio equipment that requires separate left and right analog outputs while accepting digital sample data from a digital audio processor. The PCM1742KE uses separate analog and digital supply domains, an important implementation detail for mixed-signal audio systems. The TI E2E discussion identifies the PCM1742 as using dual-supply operation, with 5 V analog and 3.3 V digital rails, while noting that PCM1753 differs at pin 5 and uses a 5 V single supply. Designers should therefore preserve the target device's pin-specific supply arrangement and use the pin-description table in the manufacturer datasheet when assigning PCB nets. Typical applications include CD and DVD player analog-output sections, home-theater audio equipment, active speaker electronics, multichannel audio processors, and digital mixing consoles. It is especially relevant where a 24-bit I2S source must be converted into stereo analog signals before amplification. In such designs, the DAC output should be followed by the intended analog gain stage rather than being assumed to drive a loudspeaker directly. The primary design consideration is preserving low-noise analog behavior and correct digital clocking. Route digital-interface traces away from the analog output path, use the decoupling and layout recommendations in the manufacturer datasheet, and confirm that the source clock, serial data, and word-select timing meet the PCM1742 interface requirements. Component tolerances and amplifier selection can materially affect the final audible noise floor. This page organizes the PCM1742KE product information into a focused engineering reference covering converter architecture, package constraints, application fit, pin compatibility, sourcing questions, and design considerations. It also separates confirmed drop-in substitutions from related parts that require different supply arrangements or pin definitions, helping prevent a superficially similar replacement from becoming an unreliable board-level substitution.

RFQ צור קשר
PCM1744U - 24-Bit 96kHz Stereo I2S DAC | Texas Instruments
PCM1744U

PCM1744U - 24-Bit 96kHz Stereo I2S DAC | Texas Instruments

The Texas Instruments PCM1744U is a 24-bit, two-channel stereo digital-to-analog converter with a 96 kHz maximum sampling rate, an I2S digital audio interface, and a 14-pin SOIC package. The device provides a 97 dB signal-to-noise ratio according to the manufacturer product page, making it suitable for high-fidelity audio playback and analog audio signal generation. An audio DAC is a semiconductor that converts digital PCM audio samples into continuous analog voltage signals. The PCM1744U belongs to the digital-to-analog converter hierarchy within audio interface ICs, where it bridges a digital audio processor and an analog amplification or line-output stage. Its I2S interface transfers framed stereo audio data using separate clock, data, and word-selection signals. Key features include 24-bit resolution, support for sampling rates up to 96 kHz, two audio output channels, and a 97 dB SNR rating. The 14-pin SOIC package supports conventional surface-mount PCB assembly. These specifications align with CD-quality and related digital audio paths where the source data resolution and required bandwidth fit within the converter's supported range. The PCM1744U is designed for stereo audio systems that require a digital input and analog output without using the device as a general-purpose signal generator. Its 24-bit interface preserves a large dynamic range, while the 96 kHz sampling-rate ceiling supports common high-resolution audio formats. The 97 dB SNR specification provides a concise indication of the converter's signal quality relative to quantization noise and other internal noise sources. Typical uses include consumer audio equipment, digital media systems, multichannel audio processors, powered speakers, sound cards, and embedded audio products. In these applications, the PCM1744U accepts I2S audio from a codec, DSP, or application processor and produces two analog outputs that can feed an op-amp buffer, line driver, headphone amplifier, or speaker amplifier stage. PCB design should provide a stable low-noise supply and short analog output routing. Input and output capacitors, grounding, and the analog signal path must follow the layout guidance in the manufacturer datasheet. Because the verified snippets do not provide exact capacitor values, supply-current limits, analog output swing, or pin names, those implementation details should not be inferred from generic PCM1744-family designs. This page consolidates the verified manufacturer specifications, distributor availability links, package information, replacement constraints, and application guidance for PCM1744U. It distinguishes confirmed facts from parameters that still require direct confirmation in the official datasheet, helping engineers evaluate the device without relying on unverified cross-reference claims.

RFQ צור קשר
PCM1744U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1744U/2K

PCM1744U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1744U/2K is a 24-bit, 96kHz sampling stereo audio digital-to-analog converter with a 97dB signal-to-noise ratio, an I2S digital audio interface, and a 14-pin SOIC package. It operates from a single 4.5V to 5.5V supply and supports an operating temperature range of -25°C to 85°C. The PCM1744U/2K is supplied in a 2500-piece tape-and-reel configuration for high-volume production. An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into an analog voltage waveform suitable for amplification and loudspeaker output. The PCM1744 belongs to the SoundPlus family of stereo DACs and sits within the broader hierarchy of ADC/DAC converters, interface integrated circuits, and semiconductor signal-processing devices. Its role is to reconstruct left- and right-channel audio from an I2S-format digital stream generated by a digital audio processor. The converter's 24-bit resolution provides a detailed digital representation of each audio sample, while the 96kHz sampling rate supports high-bandwidth stereo playback. Its 97dB SNR specification indicates a high-fidelity conversion target suitable for consumer audio equipment, digital amplifiers, multimedia systems, and other stereo audio products. Operation from a single 5V supply simplifies analog and digital power architecture compared with dual-rail designs. The PCM1744U/2K uses an I2S interface to receive synchronized serial audio data, a bit clock, and a channel latch signal. This standardized interface makes it suitable for systems whose source device already produces I2S audio. Digital timing must remain consistent with the converter requirements because incorrect clock relationships can produce channel misalignment, clicks, distortion, or incorrect output frequency. Typical uses include home-audio signal paths, active speakers, set-top and multimedia equipment, USB or network audio subsystems, and industrial monitoring products with stereo audio outputs. In each application, the PCM1744 converts the digital source stream into a pair of analog outputs that can feed a volume-control stage or a power amplifier. Its 14-pin SOIC package supports conventional surface-mount assembly. When laying out the PCB, place decoupling capacitors close to the supply pins and route analog and digital return currents carefully. Confirm the required output filtering and load conditions in the manufacturer datasheet before finalizing the analog stage. The DAC can provide a clean conversion point, but its measured performance still depends on clock quality, grounding, supply stability, and the following amplifier design. This product page combines the PCM1744U/2K electrical characteristics, package information, ordering guidance, application analysis, and pin-compatible family comparisons. It also highlights practical clocking, decoupling, analog-output, and design-selection considerations that help engineers integrate the converter efficiently into high-fidelity stereo audio equipment.

RFQ צור קשר
PCM1748E - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748E

PCM1748E - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1748E is a CMOS, monolithic, two-channel digital-to-analog converter IC with support circuitry for stereo digital audio applications. The device uses a 24-bit enhanced multilevel delta-sigma DAC architecture with fourth-order noise shaping and 8-level amplitude quantization, providing a compact solution for digital-to-analog conversion in consumer, communications, and embedded audio systems. It is supplied in a 16-pin SSOP package according to the verified Texas Instruments product information. A stereo audio DAC is a specialized data-conversion component that accepts digital audio samples and produces corresponding analog left and right channel signals. In the broader semiconductor hierarchy, the PCM1748E belongs to the audio DAC class, within ADC/DAC and interface IC families. The enhanced multilevel delta-sigma architecture is intended to improve dynamic performance and clock tolerance compared with earlier converter implementations while keeping the external signal path manageable. The verified product information identifies the PCM1748 family as a 24-bit audio DAC with I2S support and a 16-SSOP package. Distributor listings also identify the PCM1748E as a stereo audio DAC and describe the device as a 24-bit converter operating with digital audio input. The available snippets mention sampling-rate values that are not fully consistent across sources, including 96 kHz, 100 kHz, and 192 kHz; therefore, the exact supported sampling-rate range should be confirmed against the manufacturer datasheet before design release. Typical signal-chain use places the PCM1748E after an audio source such as a digital interface, USB audio controller, or embedded audio processor. The digital stream is converted into left and right analog outputs for headphone, line-level, mixer, or amplifier circuitry. Because the converter is designed for stereo audio, it is useful in compact playback systems where two-channel conversion, small package size, and straightforward digital control are more important than a high channel count. Designers should verify the SSOP-16 land pattern, digital interface format, system clocking, analog output implementation, and decoupling requirements against the current Texas Instruments datasheet. Layout should keep digital clock and data routing away from analog output nodes, while supply and ground connections should follow the manufacturer’s recommended application circuit. The 16-pin SSOP package also requires careful solderability and assembly planning when lead pitch and thermal exposure are significant design constraints. This page consolidates verified manufacturer and distributor information, identifies the PCM1748E’s converter and packaging characteristics, and provides application-oriented guidance for engineers evaluating it as a stereo audio DAC. It also distinguishes documented part variants from packaging-only references and avoids treating unverified electrical limits as guaranteed specifications.

RFQ צור קשר
PCM1748E/2K - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748E/2K

PCM1748E/2K - 24-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1748E/2K is a 24-bit, 96 kHz sampling stereo audio digital-to-analog converter with a 100 dB typical dynamic range, housed in a 16-pin SSOP package. The PCM1748E/2K provides two voltage-output audio channels and supports 4.5 V to 5 V analog operation. It uses enhanced multilevel delta-sigma conversion with fourth-order noise shaping and 8-level amplitude quantization to deliver strong dynamic performance and improved clock-jitter tolerance. An audio DAC is a semiconductor that converts digital PCM audio data into analog voltage signals suitable for headphone, line, amplifier, mixer, or recording-system input stages. Within the signal-chain hierarchy, the PCM1748E/2K is an audio DAC, which is a type of digital-to-analog converter and data-conversion IC. Its stereo architecture supports simultaneous left- and right-channel playback while reducing the number of separate converter packages required on a compact audio board. The principal features include 24-bit conversion resolution, a 96 kHz sampling rate, 100 dB typical dynamic range for the PCM1748E grade, enhanced multilevel delta-sigma architecture, fourth-order noise shaping, and 8-level amplitude quantization. Its 3-wire serial digital interface accepts digital audio data and clock signals, while the analog outputs provide a straightforward path to downstream amplification. The converter is designed for consumer and professional audio equipment where compactness, dynamic range, and clock-jitter performance are important. The internal fourth-order noise-shaping architecture moves quantization noise away from the most audible low-frequency region, while multilevel quantization reduces demands on the digital-to-analog conversion filters. This architecture supports accurate reproduction of music and speech signals at relatively low analog output amplitude. Clock jitter tolerance is improved compared with simpler delta-sigma converters, although system-level performance still depends on clean supplies, stable clocking, correct digital timing, and properly implemented output filtering. Typical uses include powered speakers, compact USB audio interfaces, headphone amplifier boards, digital mixing consoles, multimedia equipment, and home-audio playback modules. PCM1748E/2K is particularly suitable where two analog output channels are required but a six-channel or more complex multichannel DAC would add unnecessary cost and board area. A companion codec or digital interface must supply valid PCM data, while the DAC converts that data into left and right analog outputs. For layout, place the analog output components and their return paths close to the device, maintain a quiet analog ground reference, and separate digital clock and data routing from sensitive output nodes. Use stable low-noise supply decoupling and follow the pin-description table in the manufacturer datasheet when assigning PCB tracks. PCB footprint and pin assignment should be checked against the exact SSOP-16 ordering suffix before release. This product data combines the manufacturer architecture description with a side-by-side family comparison, practical layout guidance, and drop-in replacement analysis. It is intended to help engineers identify the correct Texas Instruments orderable variant, assess its conversion performance, and integrate it into a repeatable audio-system design.

RFQ צור קשר
PCM1748KE - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748KE

PCM1748KE - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1748KE is a 24-bit stereo digital-to-analog converter with a 96 kS/s sampling rate, 106 dB SNR, and an SSOP-16 (DBQ) package. It converts two digital audio channels into balanced or single-ended analog outputs and supports 4.5 V to 5.5 V operation. An audio DAC is an interface IC that reconstructs analog voltage signals from digital audio data. Its position in the signal chain is between a digital audio source, such as a transmitter, decoder, or audio processor, and an analog amplifier, mixer, headphone driver, or line output stage. The PCM1748KE belongs to the broader DAC, ADC/DAC, and integrated-circuit hierarchy while specializing in high-resolution stereo audio playback. Key features include two 24-bit DAC channels, enhanced multilevel delta-sigma conversion, fourth-order noise shaping, and 8-level amplitude quantization. These features support the stated 106 dB signal-to-noise ratio and improve tolerance to clock jitter. The converter operates from 4.5 V to 5.5 V and is specified across a -25°C to +85°C temperature range. Internally, the PCM1748 uses an enhanced multilevel delta-sigma architecture designed for excellent dynamic performance. Fourth-order noise shaping moves quantization noise away from the most sensitive part of the audio band, while 8-level amplitude quantization reduces demands on the internal conversion system. Digital audio data is accepted through a serial interface identified in the product listing as I2S-compatible. Typical applications include digital-audio decoding, multichannel audio equipment, powered speakers, soundbars, compact home-audio systems, and industrial monitoring equipment. It is particularly useful when two analog outputs are required and a 24-bit conversion system is preferred over lower-resolution converters. Its 16-pin surface-mount package also supports compact audio boards. Designers should treat the PCM1748KE as a digital-to-analog output stage rather than a complete line amplifier. The analog outputs still require appropriate filtering, grounding, and signal-path design for the intended load. Use the manufacturer pin-description table when assigning PCB tracks, and verify interface timing and output-mode requirements against the manufacturer datasheet before releasing the layout. This page organizes the PCM1748KE technical details, package information, drop-in alternatives, application guidance, and design considerations into an engineering-focused selection reference. It also identifies where direct substitution requires careful comparison of interface, package, and operating requirements.

RFQ צור קשר
PCM1750U - Dual 18-Bit Audio ADC | Texas Instruments | SOIC-28
PCM1750U

PCM1750U - Dual 18-Bit Audio ADC | Texas Instruments | SOIC-28

The Texas Instruments PCM1750U is a dual-channel, 18-bit monolithic audio analog-to-digital converter using successive-approximation conversion and a serial interface, housed in a 28-pin SOIC package. The converter is designed for applications requiring simultaneous digital capture of two audio channels while retaining an 18-bit resolution and a compact surface-mount footprint. An audio ADC is a data-converter IC that converts left- and right-channel analog audio signals into digital sample data for transmission, storage, processing, or playback. The PCM1750U belongs to the broader ADC/DAC category, with its application-specific role defined by audio signal acquisition. It is a dual CMOS device, allowing two analog audio inputs to be represented within one package rather than requiring two separate converter packages. The principal verified characteristics are 18-bit resolution, a dual-channel architecture, successive-approximation conversion, and a serial output format. These features make the PCM1750U suitable for digital audio recording, stereo capture, multimedia equipment, and other systems that require two synchronized audio conversion channels. The distributor classification identifies the device as an audio ADC in a 28-pin SOIC package. Successive-approximation conversion implements a binary-search sequence that progressively resolves the sampled input voltage. This architecture is appropriate for audio systems requiring deterministic serial data transfer and practical converter performance. Because no complete manufacturer datasheet was included in the verified dataset, the clock frequency, conversion rate, dynamic range, full-scale range, channel isolation, and analog input impedance are not independently stated here and must be confirmed in the manufacturer datasheet. Typical implementation places the PCM1750U after stereo input conditioning, with anti-alias filtering or other analog front-end stages ahead of its analog inputs. The serial interface then connects to a digital audio processor, audio codec, microcontroller, or logic device capable of receiving the converter's data, clock, and control signals. PCB layout should keep analog and digital return paths separated, minimize digital clock coupling into the analog inputs, and provide stable bypassing near the device. The principal design trade-off is that the PCM1750U integrates only the conversion function shown in the verified information; system-level audio performance also depends on the input amplifier, anti-alias filter, reference implementation, clock source, grounding, and software configuration. Before finalizing a design, verify timing, power-supply requirements, analog input range, and pin functions against the current Texas Instruments datasheet. This page consolidates verified distributor information, source traceability, replacement guidance, and engineering-focused selection notes. It also distinguishes confirmed PCM1750U characteristics from parameters that still require datasheet verification, providing a practical basis for sourcing and early design assessment without inventing unavailable electrical details.

RFQ צור קשר
PCM1750U/1K - 18-Bit Stereo Audio ADC | Texas Instruments
PCM1750U/1K

PCM1750U/1K - 18-Bit Stereo Audio ADC | Texas Instruments

Texas Instruments PCM1750U/1K is an 18-bit, dual-channel, successive-approximation audio ADC with a serial interface, packaged in a 28-pin SOIC. It operates from dual ±4.75 V to ±5.25 V supplies, covers an industrial temperature range of -40°C to +85°C, and provides separate conversion channels for stereo audio acquisition. The PCM1750U/1K is supplied in tape-and-reel packaging. An audio ADC is a specialized data-converter IC that transforms continuous analog audio signals into digital words for storage, transmission, processing, or playback. A dual ADC supports two audio channels, while a serial interface reduces the number of signal connections required between the converter and a digital audio processor. The PCM1750U/1K belongs to the ADC, data-converter IC, and audio-signal-conversion hierarchy used in professional and consumer audio equipment. The principal device attributes are 18-bit resolution, two ADC channels, a serial output, and a 28-pin SOIC package. The dual-supply operating range permits bipolar analog input signals centered on ground. Its successive-approximation architecture is suitable for audio systems that prioritize a straightforward serial output format and straightforward connection to a digital audio interface. The industrial temperature qualification supports operation across -40°C to +85°C. The converter's 28-pin gull-wing package is intended for surface mounting on printed circuit boards. Applications must account for analog and digital return-current separation, clean reference and supply connections, adequate input filtering, and controlled clocking of the serial interface. Because the device uses two analog channels, symmetric routing and grounding are important for maintaining comparable signal quality across the stereo pair. The manufacturer datasheet should be used when assigning every pin and selecting the associated input, reference, power, and interface components. Typical uses include stereo audio capture for broadcast and studio equipment, digital mixers, multichannel recording systems, audio interface modules, and embedded media appliances. The serial architecture is particularly useful where an audio processor provides a compatible clock and data interface and the design benefits from a compact two-channel conversion solution. External filtering, gain control, and conversion-clock synchronization remain important parts of the complete signal chain. For a new layout, place the analog input and reference connections away from digital clock and serial-data traces, and decouple each supply rail close to its package pins. Confirm the input-voltage range, settling requirements, clock timing, and master-mode configuration against the manufacturer datasheet before finalizing component values or clock-routing topology. This page consolidates the converter's principal electrical characteristics, packaging information, drop-in references, comparison criteria, and practical PCB guidance into an engineering-focused selection record. It is intended to support faster design review without replacing the complete manufacturer datasheet.

RFQ צור קשר
PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments
PCM1750UG4

PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments

Texas Instruments PCM1750UG4 is a dual-channel, 18-bit monolithic CMOS audio analog-to-digital converter designed for dynamic signal applications. It uses a serial interface, operates from a 4.75 V to 5.25 V supply, and is packaged in a 28-pin SOIC with a 7.50 mm body width. The converter features true co-phased inputs, an internal sample-and-hold function for each channel, and an internal reference. An audio ADC is a data-acquisition IC that converts continuously varying analog audio voltages into digital words for processing, storage, transmission, or playback. The PCM1750UG4 belongs to the broader signal-conversion hierarchy: analog-to-digital converter, data-conversion IC, interface IC, and semiconductor. Its dual-channel architecture supports simultaneous conversion of left and right audio signals while its serial output reduces the number of interconnects required between the converter and a digital audio processor. The principal features include 18-bit resolution, two true co-phased analog input channels, internal sample-and-hold circuits, an internal reference, and a serial digital interface. The true co-phased input arrangement is especially useful in stereo systems because both channels are intended to be sampled in phase, helping preserve timing relationships within the digital audio stream. Its internal reference reduces the external component count required for basic converter operation. The PCM1750UG4 combines a dual CMOS analog front end with an 18-bit conversion section and digital interface in one monolithic device. Serial data transfer supports integration with audio codecs, digital signal processors, microcontrollers, and other digital-audio systems. According to the manufacturer datasheet, total power dissipation is less than 300 mW maximum when using negative 5 V supplies. Other electrical characteristics, including conversion rate, dynamic range, total harmonic distortion, input impedance, and clock requirements, should be confirmed in the relevant datasheet tables before final design sign-off. Typical uses include stereo audio capture, professional and consumer audio equipment, digital mixers, audio recording systems, multimedia terminals, and communication equipment with analog audio inputs. The 28-pin SOIC package is suitable for conventional surface-mount PCB assembly. Systems requiring a smaller footprint should evaluate a different package rather than assuming mechanical compatibility. When designing around the PCM1750UG4, follow the datasheet-supported input, reference, clock, and decoupling arrangements. Preserve analog and digital return-current separation, provide stable local supply bypassing, and route the serial interface away from high-current switching nodes. Confirm the complete pin assignment and exposed thermal or configuration requirements from the manufacturer pin-description table before assigning PCB tracks. This product record combines the PCM1750UG4's key converter characteristics with packaging guidance, replacement considerations, and practical integration advice. It also highlights the importance of checking interface timing and analog signal conditioning rather than relying only on the headline 18-bit resolution when evaluating an audio conversion design.

RFQ צור קשר
PCM1753DBQ - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1753DBQ

PCM1753DBQ - 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1753DBQ is a 24-bit, 192 kHz stereo delta-sigma digital-to-analog converter with 106 dB SNR, 0.002% typical THD+N, and a typical 4 VPP full-scale output. The device accepts I2S audio data and is housed in a 16-lead SSOP package operating from a single 5 V supply. An audio DAC is a mixed-signal integrated circuit that converts digital PCM audio samples into analog left- and right-channel voltages. Within the signal-chain hierarchy, the PCM1753DBQ belongs to the digital-to-analog converter class, sits between a digital audio source and an analog output stage, and forms part of the broader audio converter and signal-processing IC category. Its enhanced multilevel delta-sigma architecture supports high-resolution playback while using oversampled digital filtering to suppress out-of-band noise. Key features include 24-bit resolution, 192 kHz sampling capability, 4-times or 8-times digital oversampling, and -50 dB stop-band attenuation. The three-wire serial control port supports register-write functions and user-programmable settings, while hardware-mode operation is also available. These controls let a host processor configure attenuation, data format, filtering, and other playback behavior without requiring an external analog volume control. The PCM1753DBQ produces one stereo analog output pair and requires external filtering to reconstruct the analog waveform from the converter's delta-sigma output. Decoupling and layout therefore determine whether the converter's specified 106 dB SNR and 0.002% THD+N are preserved in the finished design. A low-noise 5 V analog supply and a quiet digital return path are essential for high-resolution playback. Typical uses include A/V receivers, DVD movie players, DVD add-on cards, CD players, and other consumer audio products with digital S/PDIF-to-I2S input stages. The part also suits multimedia systems where a 192 kHz-capable stereo DAC must share a board with a digital audio processor. Its software-control interface is particularly useful when the host processor must apply volume, mute, or filter settings dynamically. Designers should follow the pin-description table, analog-output filter examples, and power-supply recommendations in the manufacturer datasheet. Pay particular attention to the function of pin 5, because the PCM1753 differs from the pin-compatible PCM1748, PCM1742, and PCM1741 at that position rather than functioning as an unrestricted replacement. This page adds a practical comparison of PCM175x drop-in options, package constraints, control-mode differences, and layout guidance that are not consolidated in the manufacturer product page. It also identifies where application-specific verification is required before substituting a related converter.

RFQ צור קשר
PCM1760P - 20-Bit Dual-Input ADC | Texas Instruments
PCM1760P

PCM1760P - 20-Bit Dual-Input ADC | Texas Instruments

The Texas Instruments PCM1760P is a 20-bit, dual-input sigma-delta analog-to-digital converter with a 48 kHz sampling rate, housed in a 28-pin through-hole PDIP package. It combines a multi-bit enhanced-noise-shaping modulation stage with a decimating digital-filter function for high-resolution audio digitization. The manufacturer datasheet specifies typical total harmonic distortion plus noise of -92 dB and a maximum value of -90 dB, providing a concrete dynamic-performance benchmark for audio signal-chain design. An ADC converts continuous analog voltage signals into numerical data for processing, storage, or transmission. The PCM1760P belongs to the sigma-delta ADC family, whose architecture uses continuous-time modulation and digital filtering to shape quantization noise away from the signal band. In the broader component hierarchy, it is an ADC within the ADC/DAC category, which forms part of mixed-signal and data-conversion semiconductor systems used in professional audio, communications, instrumentation, and consumer equipment. The principal device features include two analog input channels, 20-bit conversion resolution, and operation at up to 48 kHz. Its multi-bit enhanced-noise-shaping architecture is intended to improve in-band conversion performance, while the associated decimating digital-filter section supports practical audio-rate output. The dual-channel arrangement allows simultaneous or multiplexed capture of stereo audio without requiring two separate converter packages. A 28-pin PDIP package also supports conventional through-hole PCB assembly and prototype rework. PCM1760P combines a multi-bit monolithic modulator with a monolithic decimation digital filter. In operation, each analog input is sampled and converted by the modulator before the digital filter removes high-frequency quantization noise and reduces the conversion rate. This division between analog modulation and digital filtering is central to the performance of the device. The resulting 20-bit, 48 kHz conversion capability is suited to systems that require greater nominal resolution than conventional low-cost audio converters while retaining a straightforward external interface architecture. Typical uses include stereo audio capture, professional recording equipment, broadcast monitoring, consumer audio equipment, and instrumentation requiring two-channel sampling. In each case, the ADC converts the left and right analog channels into digital samples while the internal decimation process controls out-of-band noise. System designers should also consider clock quality, analog input conditioning, grounding, decoupling, and digital-interface timing because these external factors can materially affect the converter's measured performance. For PCB implementation, place bypass capacitors close to the device supply pins and route analog and digital returns carefully to minimize shared-impedance coupling. The through-hole package simplifies inspection and manual rework, but it occupies considerably more board area than most surface-mount audio converters. Confirm clock requirements and interface signal levels against the manufacturer pin description and application guidance before finalizing the schematic. This product page combines the manufacturer-level architecture information, exact package and conversion specifications, application guidance, and drop-in-replacement evaluation for PCM1760P sourcing and engineering review. It is intended to help buyers identify the correct 28-pin audio ADC while providing practical context for signal-chain design and board implementation.

RFQ צור קשר
PCM1760P-L - 20-Bit Dual Audio ADC | Texas Instruments
PCM1760P-L

PCM1760P-L - 20-Bit Dual Audio ADC | Texas Instruments

Texas Instruments PCM1760P-L is a dual-channel, 20-bit delta-sigma analog-to-digital converter designed for high-fidelity audio signal acquisition. It supports a maximum sampling rate of 50 kSPS, uses enhanced multi-bit noise-shaping conversion, and is offered in a 28-pin PDIP package. The converter is intended for digital audio equipment, consumer electronics, communication systems, and professional audio processing. An audio ADC is a semiconductor that converts continuously varying analog audio signals into digital sample values for storage, transmission, mixing, or further signal processing. Delta-sigma converters belong to the ADC family and use oversampling, noise shaping, and digital filtering to achieve high resolution from a relatively simple analog front end. In a signal chain, an ADC follows the microphone or line input, amplifier, and anti-alias filtering stages. The PCM1760P-L provides dual 20-bit conversion channels and a maximum sampling rate of 50 kSPS. Its enhanced noise-shaping architecture is designed for dynamic applications where low distortion and high effective resolution are important. According to the Texas Instruments PCM1760 datasheet, the associated converter system provides THD+N of -92 dB typical and -90 dB maximum, making it suitable for consumer and professional digital-audio equipment. The device operates as part of a delta-sigma conversion system that can include a companion DF1760 digital-filter device. The PCM1760 section performs analog-to-digital modulation, while the companion filtering stage applies the decimation required to produce the final PCM audio stream. This division of functions supports flexible system partitioning in equipment requiring serial digital audio data. Typical uses include CD-player and DVD-player analog sections, digital mixing consoles, audio-recording equipment, broadcast consoles, multichannel home-theater systems, and general-purpose sound-card designs. Its dual-channel architecture reduces component count when stereo audio must be captured concurrently, while the 50 kSPS rate directly supports the 48 kSPS standard used by CD-class audio systems. PCB design should preserve the short, quiet analog paths required by a high-resolution audio ADC. Place the analog input components close to the corresponding converter pins, maintain a defined ground-return path, and keep digital clock and serial-data routing away from sensitive input nodes. Verify the complete pin assignments, supply requirements, and external filter values against the manufacturer datasheet before laying out a production board. This product page combines the exact converter identity, package information, core conversion specifications, application guidance, and engineering cautions needed to assess PCM1760P-L. It also distinguishes verified device data from replacement questions by treating pin compatibility as a separate requirement rather than assuming that similar resolution or sampling rate guarantees a drop-in substitution.

RFQ צור קשר
PCM1760U - 20-Bit Dual Audio ADC | Texas Instruments
PCM1760U

PCM1760U - 20-Bit Dual Audio ADC | Texas Instruments

Texas Instruments PCM1760U is a 20-bit, dual-channel, multibit enhanced noise-shaping analog-to-digital converter system for professional audio acquisition. It converts two analog inputs at up to 48 kHz and is supplied in a 28-pin SOIC package. The converter combines a dual 20-bit monolithic modulator with a monolithic decimation digital filter, providing a compact signal-chain solution for high-precision audio systems. An audio ADC is a data-acquisition IC that samples incoming analog waveforms and converts their voltage amplitudes into high-resolution digital codes. The PCM1760U belongs to the broader ADC category, the ADC/DAC interface hierarchy, and ultimately the semiconductor and signal-conversion market. It is especially relevant when a design needs simultaneous conversion of two analog audio channels with high dynamic performance and manageable digital-filter implementation. Key characteristics include 20-bit resolution, two analog inputs, sigma-delta conversion, and a maximum sampling rate of 48 kHz. The manufacturer describes typical THD+N of -92 dB and a maximum THD+N of -90 dB. Its enhanced noise-shaping architecture reduces quantization noise within the audio band, while the integrated decimation filter prepares the converted stream for downstream digital processing. The PCM1760U integrates both the analog-to-digital modulator and the decimation filtering stage rather than requiring a separate external decimation filter for a conventional implementation. That integration can reduce board complexity and simplify clocking, data routing, and software configuration. The converter architecture remains specifically optimized for audio-rate signals, making it different from general-purpose high-speed ADCs intended for communications, instrumentation, or industrial waveform capture. Typical applications include professional digital audio equipment, multichannel recording interfaces, studio monitor controllers, digital mixing consoles, broadcast consoles, and consumer audio products requiring two-channel conversion. It is also suitable for USB or networked audio subsystems when the downstream interface accepts the PCM1760U's audio-rate serial data and clocking arrangement. Design the clock and digital interface carefully because converter performance depends on clean references, appropriate analog input conditioning, and a stable master clock. Use the manufacturer datasheet's recommended input and output-capacitor configuration, keep analog traces short, and provide return paths that avoid digital switching currents. Confirm interface voltage levels and data-format requirements against the exact system clock architecture. This product summary combines the converter's stated resolution, channel count, sampling rate, distortion performance, packaging, architecture, and application guidance with practical design notes. It also distinguishes the U package from package or ordering variants and provides verified drop-in alternatives with explicit engineering differences.

RFQ צור קשר