Texas Instruments

PCM1760P-L - 20-Bit Dual Audio ADC | Texas Instruments

MPN: PCM1760P-L ✓ פעיל
28-pin PDIP Package
כמות הזמנה מינימלית: 1 |

PCM1760P-L סקירה

Texas Instruments PCM1760P-L is a dual-channel, 20-bit delta-sigma analog-to-digital converter designed for high-fidelity audio signal acquisition. It supports a maximum sampling rate of 50 kSPS, uses enhanced multi-bit noise-shaping conversion, and is offered in a 28-pin PDIP package. The converter is intended for digital audio equipment, consumer electronics, communication systems, and professional audio processing.

An audio ADC is a semiconductor that converts continuously varying analog audio signals into digital sample values for storage, transmission, mixing, or further signal processing. Delta-sigma converters belong to the ADC family and use oversampling, noise shaping, and digital filtering to achieve high resolution from a relatively simple analog front end. In a signal chain, an ADC follows the microphone or line input, amplifier, and anti-alias filtering stages.

The PCM1760P-L provides dual 20-bit conversion channels and a maximum sampling rate of 50 kSPS. Its enhanced noise-shaping architecture is designed for dynamic applications where low distortion and high effective resolution are important. According to the Texas Instruments PCM1760 datasheet, the associated converter system provides THD+N of -92 dB typical and -90 dB maximum, making it suitable for consumer and professional digital-audio equipment.

The device operates as part of a delta-sigma conversion system that can include a companion DF1760 digital-filter device. The PCM1760 section performs analog-to-digital modulation, while the companion filtering stage applies the decimation required to produce the final PCM audio stream. This division of functions supports flexible system partitioning in equipment requiring serial digital audio data.

Typical uses include CD-player and DVD-player analog sections, digital mixing consoles, audio-recording equipment, broadcast consoles, multichannel home-theater systems, and general-purpose sound-card designs. Its dual-channel architecture reduces component count when stereo audio must be captured concurrently, while the 50 kSPS rate directly supports the 48 kSPS standard used by CD-class audio systems.

PCB design should preserve the short, quiet analog paths required by a high-resolution audio ADC. Place the analog input components close to the corresponding converter pins, maintain a defined ground-return path, and keep digital clock and serial-data routing away from sensitive input nodes. Verify the complete pin assignments, supply requirements, and external filter values against the manufacturer datasheet before laying out a production board.

This product page combines the exact converter identity, package information, core conversion specifications, application guidance, and engineering cautions needed to assess PCM1760P-L. It also distinguishes verified device data from replacement questions by treating pin compatibility as a separate requirement rather than assuming that similar resolution or sampling rate guarantees a drop-in substitution.

חלופות תחליף ישיר עבור PCM1760P-L — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

PCM1760P-L דירוגים מרביים ומאפיינים חשמליים

Product Type Dual-channel delta-sigma analog-to-digital converter
רזולוציה 20 bit
Number of Input Channels 2 channels
Maximum Sampling Rate 50 kSPS
Nominal Audio Sampling Rate 48 kSPS
Conversion Architecture 4-bit, 4th-order, 64-times oversampled delta-sigma modulation
THD+N -92 dB typical; -90 dB maximum
Output Format Serial
Analog Input Type Dual analog input
מארז 28-pin PDIP
סוג הרכבה Through-hole
Companion Filter Device DF1760 series
AEC-Q100 Qualification Not applicable

מדריך תצורת פינים של PCM1760P-L 28-pin pdip

תצורת פינים עבור PCM1760P-L (מארזת 28-pin pdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-pin pdip עבור PCM1760P-L

אין נתוני פריסת פינים מפורטים עבור PCM1760P-L.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM1760P-L מתאים עבור 6 יישוםs: CD and DVD Player Audio Capture, Professional Audio Recording Console, Digital Mixer and Sound Processor, Digital Audio Interface, Broadcast and Studio Monitoring, Home Theater and Multimedia Equipment.

🎧

CD and DVD Player Audio Capture

The PCM1760P-L fits stereo 48 kSPS audio paths in CD- and DVD-class equipment because its dual 20-bit channels operate up to 50 kSPS. The dual-channel architecture captures left and right signals simultaneously, reducing the number of converters required for stereo systems. Its delta-sigma modulator and companion DF1760 digital-filter arrangement support a clean separation between analog conversion and decimation. Board layout should preserve short analog inputs, isolate clock traces, and use the manufacturer’s recommended supply bypassing.

🎙️

Professional Audio Recording Console

A recording console can use the PCM1760P-L to convert two balanced analog channels into high-resolution digital audio samples at 48 kSPS. The 20-bit conversion format and -92 dB typical THD+N rating are useful when the complete analog path preserves signal integrity. Because the converter handles modulation while the DF1760 performs decimation, the system partition must follow the manufacturer’s timing and grounding architecture. Use low-noise input amplifiers and carefully separated analog and digital returns.

🎛️

Digital Mixer and Sound Processor

The PCM1760P-L is suitable for stereo conversion stages in digital mixers and general sound processors operating at 48 kSPS. Its two channels reduce board area compared with separate single-channel converters, while the serial output supports connection to digital signal-processing circuitry. The 50 kSPS ceiling matches common CD-derived audio rates but does not support higher-resolution PCM formats such as 96 kHz. Validate interface timing and filtering before using the converter with a modern audio bus.

🌐

Digital Audio Interface

A digital audio interface can use the PCM1760P-L for stereo analog-to-digital conversion before samples are transmitted or processed. The device’s 20-bit resolution, dual-channel format, and serial interface suit classic digital-audio equipment, while its 48 kSPS operating capability aligns with conventional consumer audio. Designers should treat the serial clock as a critical signal, keep it away from analog inputs, and follow the datasheet’s pin and decoupling guidance. The companion DF1760 completes the required decimation path.

📺

Broadcast and Studio Monitoring

The PCM1760P-L can support monitoring and auxiliary stereo capture stages that operate at 48 kSPS. Its dual 20-bit channels provide sufficient nominal resolution for many professional monitoring paths, while the -92 dB typical THD+N specification establishes a useful converter benchmark. Overall monitoring accuracy still depends on input-referenced design, preamplifier noise, analog filter quality, grounding, and clock implementation. Confirm that the 28-pin PDIP package remains compatible with the target product architecture.

🏠

Home Theater and Multimedia Equipment

PCM1760P-L suits legacy home-theater and multimedia products requiring two simultaneous 48 kSPS audio channels. The converter can capture stereo analog sources for internal digital processing, storage, or transmission, while its serial interface avoids a parallel-data footprint. Its maximum 50 kSPS rate is appropriate for CD-derived audio but not modern 96 kHz or 192 kHz formats. Use the exact manufacturer application information when partitioning the modulator, companion filter, clock source, and analog input network.

סיכום מוצרים מומלצים

DF1760P Companion decimation-filter device for the PCM1760 conversion system בשימוש ב-: CD and DVD Player Audio Capture, Professional Audio Recording Console, Digital Mixer and Sound Processor, Digital Audio Interface, Broadcast and Studio Monitoring, Home Theater and Multimedia Equipment
What is the PCM1760P-L?
The PCM1760P-L is a Texas Instruments dual-channel, 20-bit delta-sigma analog-to-digital converter in a 28-pin PDIP package. According to the Texas Instruments PCM1760 datasheet, it supports conversion rates up to 50 kSPS and forms part of a dual-channel audio acquisition system designed for dynamic applications. Its enhanced multi-bit noise-shaping architecture is intended to provide high effective resolution and low total harmonic distortion plus noise.
What are the key specifications of PCM1760P-L that engineers should know?
The PCM1760P-L combines dual 20-bit resolution, a maximum 50 kSPS conversion rate, serial digital output, and a 28-pin PDIP package. According to the Texas Instruments PCM1760 datasheet, the associated system achieves -92 dB typical and -90 dB maximum THD+N. Its architecture uses a 4-bit, fourth-order, 64-times oversampled delta-sigma modulator, making it appropriate for high-quality audio capture systems.
What is the sampling rate of PCM1760P-L?
The PCM1760P-L supports a maximum conversion rate of 50 kSPS and is commonly associated with 48 kSPS digital-audio operation. The 48 kSPS rate directly supports CD-class audio acquisition, including stereo playback equipment, recording systems, and digital mixers. According to the Texas Instruments PCM1760 datasheet, the converter’s delta-sigma modulator performs 64-times oversampling before decimation.
Does the PCM1760P-L support stereo audio input?
Yes, the PCM1760P-L is a dual-channel converter with two analog input channels for simultaneous stereo acquisition. According to the Texas Instruments PCM1760 datasheet, the device is a 20-bit serial-output ADC designed for dual-channel audio systems. It is therefore suitable for stereo line inputs, dual microphone preamplifier outputs, digital mixers, and other circuits that require two synchronized audio channels.
Where can I download the PCM1760P-L datasheet PDF?
The Texas Instruments PCM1760P-L datasheet can be obtained from the manufacturer’s PCM1760 document link listed on this page. The document describes the dual 20-bit delta-sigma conversion system, including its 4-bit fourth-order modulator, 64-times oversampling architecture, 50 kSPS maximum sampling rate, THD+N characteristics, electrical limits, and package information. Use the manufacturer document for authoritative design values.
Where can I find the PCM1760P-L pinout?
The PCM1760P-L pinout is shown in the Texas Instruments PCM1760 datasheet’s pin-configuration and connection diagrams. The device uses a 28-pin PDIP package with two analog input channels, digital serial-interface signals, clocking connections, supplies, and ground pins. Because signal, clock, supply, and analog-return assignments determine PCB correctness, follow the manufacturer diagram when assigning every footprint position.
What is the best drop-in replacement for PCM1760P-L?
No drop-in replacement is confirmed from the available manufacturer and distributor records. A valid replacement must match the 28-pin PDIP footprint, pin functions, 20-bit conversion rate, 50 kSPS capability, serial interface, clock requirements, supply voltages, and analog-input topology. Submit the required part number to the Request a Quote form on this page so procurement can identify a documented drop-in option without assuming compatibility.
Can another audio ADC replace PCM1760P-L?
Another audio ADC can replace PCM1760P-L only after its pinout and interface are verified. Similar 20-bit resolution or sampling rate is insufficient because the replacement must also preserve the 28-pin PDIP footprint, serial data protocol, clocking method, analog input range, supply arrangement, and decoupling requirements. Use the Request a Quote form on this page and request a part specifically documented as pin-to-pin compatible.
PCM1760P-L vs PCM1760P: which one should I select?
The selection depends on the exact orderable package and suffix rather than conversion resolution alone. The PCM1760P-L is identified as the 28-pin PDIP device, while package details for PCM1760P must be checked independently before substitution. If PCM1760P uses a different package or pin assignment, it is not a drop-in replacement. Confirm the orderable suffix and footprint against the Texas Instruments datasheet.
When should I choose PCM1760P-L over a newer audio ADC?
Choose PCM1760P-L when an existing design specifically requires its 28-pin PDIP footprint, dual 20-bit conversion, serial output, and 50 kSPS capability. A newer ADC may be preferable for a fresh design requiring smaller packaging, higher resolution, greater sampling rates, or digital audio formats beyond 50 kSPS. For legacy product revisions, compatibility and supply continuity may justify retaining the older architecture.
Is PCM1760P-L suitable for 48 kHz CD-quality audio?
Yes, PCM1760P-L is suitable for 48 kHz audio acquisition because its maximum sampling rate is 50 kSPS. Its dual 20-bit channels and -92 dB typical THD+N suit stereo CD-class signal chains when the analog front end, clocking, and companion digital filtering are implemented correctly. The converter rating alone does not determine final system distortion; amplifiers, analog filters, grounding, and clock jitter also affect performance.
Where can I buy PCM1760P-L online?
PCM1760P-L can be requested through the Request a Quote form on this page, which is the recommended route for current commercial availability and order processing. The listing identifies the part as a Texas Instruments 28-pin PDIP dual 20-bit ADC. Provide the required quantity, target shipment location, and production schedule so procurement can return an actionable quotation and availability update.
What is the price of PCM1760P-L?
The current commercial price for PCM1760P-L is returned through the Request a Quote form on this page. Pricing depends on quantity, order history, market conditions, and required delivery terms, so a static figure can become inaccurate quickly. Submit the desired quantities and packaging requirements to obtain a current quotation for the exact Texas Instruments part number.
What is the lead time for PCM1760P-L?
Current lead time for PCM1760P-L should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled builds, and inventory conditions. Include your required quantity, production date, ship-to country, and whether the 28-pin PDIP package is mandatory so procurement can provide a lead time applicable to the actual build plan.
Is PCM1760P-L currently in stock?
PCM1760P-L inventory status should be checked through the Request a Quote form on this page rather than inferred from a catalog entry. Supply availability for a legacy audio converter can fluctuate, and a listing does not guarantee that stock is allocated to a new order. Provide the required quantity and delivery schedule so procurement can confirm current availability and any factory lead time.
How should I design the PCB around PCM1760P-L?
Keep each analog input path short, place its passive components close to the associated pins, and route the circuit away from digital clock and serial-data traces. Provide a low-impedance ground connection and decouple the supply pins close to the device. According to the Texas Instruments PCM1760 datasheet architecture, the analog modulator and digital filtering should be treated as separate circuit sections to prevent switching and clock activity from corrupting the input signal.

נתוני עזר הנדסיים עבור PCM1760P-L — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM1760P-L for a legacy or new design that specifically requires a dual-channel, 20-bit, 50 kSPS serial ADC in a 28-pin PDIP package. It is particularly suitable for 48 kSPS stereo audio paths, CD and DVD player analog sections, recording consoles, sound processors, and digital audio interfaces. Retaining this device makes sense when PCB compatibility and architecture continuity outweigh the smaller package, higher resolution, or greater sampling rate available from newer converters. Do not substitute a superficially similar 20-bit ADC without verifying the complete pinout, clock interface, supply arrangement, analog range, and companion filtering requirements. No confirmed drop-in alternative is listed here, so a redesign should be evaluated separately from a replacement sourcing exercise.

השוואה עם חלופות

פרמטר מוצר זה
Brand Texas Instruments
Package 28-pin PDIP
Resolution 20 bit
Input Channels 2 channels
Maximum Sampling Rate 50 kSPS
Conversion Architecture 4-bit, 4th-order, 64-times oversampled delta-sigma modulation
THD+N -92 dB typical; -90 dB maximum
Output Interface Serial
Mounting Type Through-hole

מבדילים עיקריים

  • Dual-channel conversion in one package (לעומתSingle-channel 20-bit PDIP ADC)
  • Direct support for 48 kSPS audio (לעומתLower-rate 20-bit ADC)
  • Low-conversion-noise performance for the class (לעומתLower-performance delta-sigma ADC)

הערות תכנון

Keep the two analog input networks close to their corresponding PCM1760P-L pins and use the shortest practical return path to the device ground. Place analog bypass components on the same side of the PCB as the converter whenever possible. A 28-pin PDIP makes analog routing visible and accessible, but it does not compensate for long traces or shared noisy return currents. Follow the manufacturer’s reference configuration for resistor values and capacitor placement.

Separate the analog modulation section from the digital data and clock paths. Route the serial clock away from input pins, avoid running clock traces beneath the converter or analog-input network, and provide a stable quiet ground reference. Because the DF1760 performs decimation in a companion stage, follow the complete PCM1760/DF1760 system layout rather than treating the converter and digital filter as unrelated blocks.

Do not select a replacement based only on 20-bit resolution and a 50 kSPS sample rate. A drop-in device must also reproduce the 28-pin PDIP footprint, analog-input levels, serial protocol, clock polarity, supply requirements, and decoupling arrangement. Similarly, do not assume that PCM1760P without the -L suffix is interchangeable; verify its package and orderable suffix in the manufacturer documentation before approving a substitution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The PCM1760P-L is a commercial audio converter rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or authorized documentation.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

PCM1760P-L datasheet PCM1760P-L pinout PCM1760P-L datasheet pdf PCM1760P-L specifications PCM1760P-L equivalent PCM1760P-L replacement PCM1760P-L cross reference PCM1760P-L 28-pin PDIP PCM1760P-L 20-bit ADC PCM1760P-L 50 kSPS Texas Instruments PCM1760P-L PCM1760P-L price PCM1760P-L stock PCM1760P-L stereo audio ADC

רכיבים ומונחים קשורים

Texas Instruments PCM1760P-L PCM1760 DF1760P analog-to-digital converter ADC audio ADC delta-sigma converter audio signal chain 20-bit resolution 50 kSPS sampling rate 48 kSPS audio THD+N enhanced multi-bit noise shaping 64-times oversampling 4-bit quantizer 4th-order delta-sigma modulator decimating digital filter serial audio interface 28-pin PDIP through-hole package dual-channel audio CD player DVD player
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר