מוצרים (44,000+)

SY89295UTI - 1024-Tap 3.2-14.8ns Delay Line | Microchip
SY89295UTI

SY89295UTI - 1024-Tap 3.2-14.8ns Delay Line | Microchip

The Microchip Technology SY89295UTI is a digitally programmable precision delay line IC with 1024 taps, a total propagation-delay range of 3.2 ns to 14.8 ns, and a 10 ps tap increment. It uses LVPECL signaling and is packaged in a surface-mount 32-pin TQFP. The SY89295UTI is designed for high-speed timing applications requiring fine, digitally controlled adjustment of signal propagation time. A programmable delay line is a timing semiconductor that delays an incoming logic signal according to a numerical control value. Within the broader clock and timing IC hierarchy, it belongs to the delay-line family and provides a calibrated propagation-delay element for clock alignment, data-path timing compensation, phase adjustment, and test or instrumentation systems. Unlike a general-purpose delay buffer, the SY89295UTI combines 1024 discrete delay taps with a 10 ps increment. The key operating features include support for 2.5 V or 3.3 V LVPECL operation, a stated maximum operating frequency of 1.5 GHz, and a 3.2 ns to 14.8 ns programmable delay range. A 10-bit parallel control interface selects the required delay position. The compact 32-pin TQFP provides enough external connections for the control bus and high-speed differential inputs and outputs while remaining suitable for automated board assembly. The architecture is intended to place repeatable, digitally selectable delay directly into a high-speed signal path. Because the delay range is divided into 1024 taps, engineers can express timing offsets at 10 ps resolution. The LVPECL interface is suited to systems that use emitter-coupled logic for high-speed point-to-point signaling. Exact input-output timing accuracy, jitter, control setup requirements, and loading characteristics should be taken from the manufacturer datasheet when establishing a production design. Typical uses include clock-path phase alignment, data-retiming systems, high-speed test equipment, telecommunications timing modules, and instrumentation requiring calibrated programmable delay. It can also support FPGA or ASIC bring-up work where engineers need to adjust an external timing path without repeatedly changing board delays or cable lengths. PCB implementation requires careful treatment of the LVPECL interface and the 10-bit digital control bus. Route the high-speed differential paths over a continuous reference plane, keep the delay-line output close to the receiving circuit, and use controlled-impedance layout where the system architecture requires it. Confirm the exact pin assignments, supply requirements, control timing, decoupling recommendations, and unused-pin treatment in the manufacturer pin description before layout release. This page combines the part identity, programming range, package information, sourcing details, and practical implementation guidance to accelerate component selection. It also distinguishes directly supported drop-in candidates from related package or ordering variants that require separate engineering review.

RFQ צור קשר
SY89296UMG - 3.2-14.8ns PECL Delay Line | Microchip
SY89296UMG

SY89296UMG - 3.2-14.8ns PECL Delay Line | Microchip

The Microchip Technology SY89296UMG is a programmable PECL delay line with 1024 taps, a digitally selectable delay range of 3.2 ns to 14.8 ns in 10 ps increments, and a 32-pin QFN package measuring 5 mm by 5 mm. It is designed for applications requiring precise signal-delay calibration within high-speed clock and data-processing systems. A programmable delay line is a timing IC that applies a controlled propagation delay to an input signal. Its delay is adjusted through a digital control interface, allowing a system to compensate for path-length differences, align clock domains, or create adjustable timing relationships. The SY89296U belongs to the clock and timing IC hierarchy, where delay lines support deterministic signal conditioning rather than signal generation or voltage regulation. The primary digital control function provides 1024 programmable taps over a 3.2 ns to 14.8 ns range, with each programmed step corresponding to 10 ps. The manufacturer also describes continuous fine tuning over an approximately 40 ps range through an external control voltage. This combination supports coarse digital selection combined with narrow analog adjustment where finer timing resolution is needed. The device operates as a 2.5 V or 3.3 V PECL delay-line component. PECL uses positive emitter-coupled logic signal levels and is commonly associated with high-speed clock distribution and data-alignment systems. Because the available information does not specify input-output thresholds, control-interface logic levels, temperature range, or propagation-delay tolerances, those characteristics should be confirmed in the manufacturer documentation before final circuit design. Typical circuit roles include clock-skew compensation, waveform alignment, parallel-channel timing calibration, test-equipment timing adjustment, and delay insertion in high-speed communication paths. Its useful feature is that a fixed-delay network can be redesigned into a programmable element when board-level timing variation must be corrected after assembly. For implementation, preserve the manufacturer's recommended input and output termination and provide clean, low-jitter references to the control inputs. Confirm whether the fine-tuning control requires a particular source impedance and whether unused control pins must be tied to defined logic levels. Account for package parasitics and board routing delay when calibrating a system. This product summary combines the confirmed 1024-tap architecture, 3.2 ns to 14.8 ns range, 10 ps digital increment, approximately 40 ps analog tuning range, PECL electrical designation, and 32-pin 5 mm by 5 mm QFN package into an implementation-oriented guide for clock and timing engineers.

RFQ צור קשר
SY89296UMI - 1024-Tap Programmable Delay Line | Microchip
SY89296UMI

SY89296UMI - 1024-Tap Programmable Delay Line | Microchip

The Microchip Technology SY89296UMI is a Precision Edge programmable delay line featuring 1024 taps, a 10 ps tap increment, and a programmable delay range of 3.2 ns to 14.8 ns. It operates from a 2.375 V to 3.6 V supply and is packaged in a 32-pin VFQFN surface-mount package with an exposed pad. A programmable delay line is a clock-and-timing semiconductor that inserts a controlled interval between an input transition and an output transition. It belongs to the delay-line and timing-element hierarchy, where adjustable propagation delay supports calibration, trigger alignment, data acquisition, communications timing, and signal-conditioning applications. The SY89296UMI converts a programmable digital control into a fine-resolution delay across 1024 available taps. The principal features include 1024 programmable taps, a 10 ps increment per tap, a 3.2 ns minimum programmed delay, a 14.8 ns maximum programmed delay, and a 2.375 V to 3.6 V operating supply range. Its exposed-pad VFQFN construction supports heat dissipation through the PCB copper area, while the surface-mount format reduces board area compared with many older delay packages. The delay is established from the device's 1024-tap organization rather than through an external timing network. A 10 ps tap increment provides substantially finer control than coarse selectable-delay devices, allowing calibration or timing compensation to be adjusted in regular steps. The 3.2 ns to 14.8 ns range covers short propagation intervals suitable for precision synchronization, pulse qualification, and embedded timing correction. Typical uses include clock and data capture systems, communications interface timing, pulse-generation and debounce circuits, test and measurement instrumentation, and clock-alignment networks. In these systems, the device can compensate for propagation differences introduced by external circuitry or provide a controlled delay between related signals. PCB layout should preserve a continuous return path beneath the exposed pad and minimize sensitive timing traces near high-current switching nodes. Decoupling capacitors should be placed close to the supply and ground pins, while the control interface traces should be kept short to reduce control-timing skew. The device requires careful review of its pin description, control-code table, supply requirements, and timing characteristics before layout release. This page combines the exact orderable MPN, programming details, package information, application guidance, replacement criteria, and engineering design notes needed to evaluate the SY89296UMI as a precision timing component.

RFQ צור קשר
SY89296UTG - 1024-Tap Programmable Delay Line | Microchip
SY89296UTG

SY89296UTG - 1024-Tap Programmable Delay Line | Microchip

Microchip Technology SY89296UTG is a programmable delay-line IC with 1024 taps, a digitally selectable delay range of 3.2 ns to 14.8 ns, and 10 ps nominal adjustment increments. It is offered in a 32-pin TQFP package and is identified as a 2.5 V/3.3 V PECL delay line. The SY89296U family also supports continuous fine adjustment over an approximately 40 ps range by varying a control voltage. A programmable delay line is a timing IC that propagates an input signal through a controlled number of delay elements. It belongs to the delay-line and timing-element hierarchy within clock and timing integrated circuits. Instead of relying on a fixed propagation delay, the SY89296UTG allows a system controller to select the delay digitally and apply an additional analog trim. This combination supports calibration, phase alignment, skew adjustment, and timing compensation in systems where fixed-delay components would require several alternative part numbers. The primary feature set includes 1024 selectable taps, a 3.2 ns minimum delay, a 14.8 ns maximum delay, and 10 ps digital increments. The total range spans 11.6 ns, allowing 1024 evenly spaced selections across that interval. The approximately 40 ps continuous voltage-adjustment window provides finer resolution than the digital control and can be useful for production calibration, clock-tree compensation, or fine phase correction. The SY89296UTG operates as a 2.5 V/3.3 V PECL delay-line device. PECL interfacing places the part in high-speed clock and timing systems where terminated differential-style biasing and controlled impedance are common. The 32-pin TQFP surface-mount package supports conventional PCB assembly while providing separate connections for the programmable control and delay element. Exact control-logic levels, input-output impedance, temperature range, and recommended circuitry should be confirmed in the manufacturer's product documentation before layout release. Typical applications include clock-data recovery, high-speed interface timing compensation, data acquisition systems, communication equipment, instrumentation, and industrial control. In a clock distribution design, the programmable taps can align a forwarded clock with a data path, while the continuous control can compensate for board-level propagation differences. The device can also provide a calibrated delay for test and measurement systems where repeatable timing relationships are required. PCB implementation should preserve the impedance environment required by the PECL interface and place decoupling and termination components close to their associated pins. Because the digital tap selection and analog trim control serve different purposes, firmware and calibration procedures should record the final control settings rather than relying only on a nominal delay code. This page combines manufacturer specifications, procurement information, packaging details, and application guidance to support initial design evaluation.

RFQ צור קשר
SY89296UTI - 1.5GHz LVPECL 1024-Tap Delay Line | Microchip
SY89296UTI

SY89296UTI - 1.5GHz LVPECL 1024-Tap Delay Line | Microchip

The Microchip Technology SY89296UTI is a precision LVPECL programmable delay-line IC with a 3.2 ns to 14.8 ns delay range, 1,024 selectable taps, and operation up to 1.5 GHz in a 32-pin TQFP package. The digital control interface programs the delay in 10 ps increments, while an analog fine-tune input permits continuous adjustment over an approximately 40 ps range. A programmable delay line is a timing-control semiconductor that inserts a calibrated interval between an incoming signal and its output. Within the broader clock and timing hierarchy, it combines a clock-and-timing IC with a digitally controlled delay element. The SY89296U supports precise phase alignment, delay compensation, and signal-path timing calibration in systems where fixed propagation delay is insufficient. Key features include 1,024 discrete delay taps, a 10 ps digital delay increment, a 10-bit delay control word, and a separate D[10] cascade-control bit. The input and inverted input default to an equivalent low state when left floating. An additional 11th control bit permits simultaneous cascading of SY89296U devices for a larger delay range. The analog fine-tune function adds approximately 40 ps of continuous adjustment to the digitally selected delay. The SY89296U uses LVPECL-compatible high-speed differential signaling for 2.5 V or 3.3 V operation. Its input bandwidth reaches 1.5 GHz, allowing it to operate as a programmable phase-shifting element rather than merely a low-frequency timing delay. The combination of 10 ps digital steps and analog fine tuning supports both coarse alignment across a wide interval and fine adjustment within one digital step. Typical uses include clock and data recovery timing compensation, high-speed serial-interface phase alignment, telecommunications timing adjustment, instrumentation synchronization, and automated test equipment. In each case, engineers use the digital control bits to select a coarse delay and then use the fine-tune control for precision calibration when fixed clock distribution alone cannot accommodate propagation, skew, or board-timing variation. PCB implementation requires careful treatment of differential clock signals and their return paths. The SY89296UTI should be placed close to the circuit requiring phase adjustment, with short and symmetrically routed differential traces, solid ground-plane reference, and minimal stubs. Power and ground connections must follow the pin-description and layout guidance in the manufacturer datasheet. Termination values and decoupling should be selected from the circuit conditions rather than estimated from nominal voltage alone. This page consolidates the manufacturer’s programming architecture, delay-resolution details, interface information, and practical PCB considerations into an engineering-focused guide. It also distinguishes the SY89296UTI from a verified drop-in replacement list, avoiding unsupported substitutions that could compromise LVPECL timing, control compatibility, or the 32-pin footprint.

RFQ צור קשר
SY89297UMG - 3.2Gbps Dual-Channel Delay Line | Microchip
SY89297UMG

SY89297UMG - 3.2Gbps Dual-Channel Delay Line | Microchip

The Microchip SY89297UMG is a precision dual-channel programmable delay line operating from a 2.5V or 3.3V supply, with data rates up to 3.2 Gbps and delay steps as small as 5 ps in a 24-pin QFN package. Each independent channel provides a programmable delay range from 2 ns to 7 ns, allowing fine timing adjustment in high-speed communication, clock-alignment, and test systems. A programmable delay line is a timing IC that inserts a controlled interval between an incoming digital signal and its output. The delay line category belongs to the broader timing-element and clock-and-timing IC hierarchy, where precision delay supports compensation for propagation-time differences, skew management, and deterministic signal alignment. Unlike general-purpose logic-delay circuits, the SY89297UMG combines high-speed data handling with digitally controlled, fine-grained delay adjustment. Key features include two independent delay channels, a maximum data rate of 3.2 Gbps, 5 ps minimum programmable delay increments, and a 1024-tap delay range. The device supports 2.5V and 3.3V operation and uses a digital configuration interface for programmable settings. These characteristics make it suitable for systems requiring calibrated timing rather than fixed propagation delay. Each channel can be adjusted independently, allowing two signals to be matched or deliberately offset. The manufacturer describes the delay step as extremely linear and monotonic over the programming range, which supports repeatable timing calibration and predictable control-loop behavior. Its 4 mm by 4 mm 24-pin QFN package also includes an exposed pad for improved thermal coupling on multilayer PCB designs. Typical uses include high-speed serial-interface timing compensation, clock/data alignment, phase adjustment in communication equipment, delay calibration in automated test systems, and synchronization between independently clocked domains. The dual-channel architecture is especially useful when two related signals must be adjusted together or compared against one another with low setup uncertainty. Designers should account for the high-speed layout requirements associated with a 3.2 Gbps device. Place input and output decoupling capacitors close to their associated supply and ground pins, provide a continuous return path beneath the exposed pad, and route high-speed differential traces over a stable reference plane with minimized stubs and discontinuities. This product record combines the manufacturer's timing specifications with package details, application guidance, replacement constraints, and design notes. The key engineering point is that true drop-in replacements must preserve the 24-pin QFN footprint, dual-channel architecture, 5 ps delay granularity, and high-speed electrical behavior rather than merely offering similar programmable-delay functionality.

RFQ צור קשר
SY89297UMH - 3.2 Gbps Dual Delay Line | Microchip
SY89297UMH

SY89297UMH - 3.2 Gbps Dual Delay Line | Microchip

The Microchip Technology SY89297UMH is a dual-channel programmable delay line IC supporting data rates through 3.2 Gbps, with two independent delay channels covering a 2 ns to 7 ns range in programmable increments as small as 5 ps. The device is housed in a 24-pin VFQFN exposed-pad package measuring 4 mm by 4 mm. A programmable delay line is a timing IC that inserts a controlled interval into a signal path while preserving high-speed data transmission characteristics. In the electronic-component hierarchy, a delay line belongs to clock and timing ICs, where it supports phase alignment, data recovery, skew compensation, calibration, and deterministic timing adjustment. The SY89297U family uses precision CML-compatible differential signaling for high-speed clock and data applications. Each of the two channels contains 1024 programmable taps according to the distributor part description. The 5 ps delay step provides fine timing resolution across the usable range, while monotonic and linear delay behavior supports predictable calibration. The device is designed for 2.5 V or 3.3 V operation, making it suitable for systems that require precise delay adjustment without external passive delay networks. At data rates through 3.2 Gbps, the SY89297U can compensate for propagation-delay differences introduced by connectors, cables, printed-circuit-board traces, optical paths, clock distribution, or parallel data channels. Its dual-channel architecture permits two delays to be controlled independently, enabling matched timing for differential or parallel signal groups. The small 4 mm by 4 mm package also reduces board area compared with discrete or multi-component delay solutions. Typical applications include clock de-skewing, high-speed interface alignment, data acquisition timing calibration, communications test equipment, phase adjustment in instrumentation, and synchronization of independent clock domains. The device is particularly relevant where calibrated delay is needed after high-speed signal distribution or where circuit-board and cable delays must be compensated dynamically. When laying out a design, use the exposed-pad thermal and electrical connection exactly as shown in the manufacturer datasheet, keep the CML input and output return paths compact, and account for input and output termination requirements. The digital configuration interface also requires correct interface voltage levels and signal sequencing; consult the pin-description and application information before assigning the control pins. This page consolidates the exact package, delay, speed, and programming characteristics of SY89297UMH with procurement guidance, application analysis, design considerations, and a careful assessment of available drop-in alternatives. It also distinguishes the dual-channel SY89297U from the single-channel SY89295U and SY89296U family members.

RFQ צור קשר
SY89426JC - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JC

SY89426JC - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip SY89426JC is a clock and frequency synthesizer IC that generates 622.08 MHz and 155.52 MHz clocks for SONET OC-12 and OC-3 systems, with a maximum output frequency of 622.08 MHz and a 28-pin J-lead LCC package. A clock synthesizer is a timing IC that derives one or more precisely related output frequencies from an external reference clock. Within the hierarchy of clock and timing integrated circuits, it supports communication infrastructure requiring low deterministic jitter, consistent frequency relationships, and multiple logic-compatible outputs. The SY89426JC uses TTL/CMOS-compatible inputs and provides PECL clock outputs. The device provides a single-chip source for 622.08 MHz and 155.52 MHz clocks. Its 622.08 MHz output is differential PECL, while the 155.52 MHz output is single-ended PECL. It also includes a reference output and supports SONET-compliant jitter performance stated as 0.01 UI in the retrieved technical data. The SY89426JC is intended for telecommunications equipment operating at SONET OC-12 and OC-3 line rates. The 622.08 MHz and 155.52 MHz outputs support clock generation in line-card, transceiver, and network-interface designs where a local oscillator must provide both high-speed and divided timing signals. Use controlled-impedance routing for the differential 622.08 MHz output and provide compliant termination and decoupling close to the device. The 28-LCC package is a leaded ceramic package, so thermal performance and assembly compatibility should be checked against the PCB footprint and manufacturing process. This page consolidates verified distributor specifications, package information, datasheet links, and design-oriented guidance for the SY89426JC clock synthesizer.

RFQ צור קשר
SY89426JI - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JI

SY89426JI - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip Technology SY89426JI is a clock and frequency synthesizer IC that generates 622.08 MHz and 155.52 MHz clocks for SONET OC-12 and OC-3 systems. Its primary high-speed output is differential PECL, its 155.52 MHz output is single-ended PECL, and it accepts TTL/CMOS-compatible reference inputs. The device is packaged in a surface-mount 28-LCC J-lead package. A clock synthesizer is a timing IC that derives one or more internally regulated clock outputs from an external reference. Clock synthesizers belong to the clock and timing IC hierarchy, where they support communication links, network equipment, and test systems by distributing frequencies with controlled phase and jitter. In a SONET design, accurate clocks are essential because transmit and receive hardware must process high-speed serial data within defined timing margins. The SY89426JI provides a single-chip source for both 622.08 MHz and 155.52 MHz clock frequencies. The verified device description identifies SONET-compliant jitter performance of 0.01 UI. Differential PECL at 622.08 MHz is suited to high-speed serial links, while the single-ended PECL output at 155.52 MHz supports parallel or lower-rate clocking requirements. TTL/CMOS-compatible inputs and a reference output simplify integration with external oscillators and system clock-distribution networks. Available verified data does not specify the complete electrical limits, supply-voltage range, power dissipation, temperature range, or detailed pin assignments. Those parameters remain marked as data-needed rather than inferred from the device category. Likewise, no manufacturer datasheet URL appears in the supplied search results, so a distributor or indexed datasheet page is retained only as a source reference rather than represented as an official Microchip PDF. Typical uses include SONET optical network equipment, telecommunications line cards, high-speed clock-distribution assemblies, and instrumentation that needs related OC-12 and OC-3 clock domains. The principal design consideration is interface compatibility: downstream circuits must support differential or single-ended PECL levels, and any unused output or supply pins must be terminated exactly as directed by the complete datasheet. This product page consolidates the verified clock frequencies, logic families, SONET jitter claim, package format, source links, and engineering cautions. It also distinguishes documented functions from unspecified parameters, helping designers evaluate the SY89426JI without converting category-level assumptions into unsupported component specifications.

RFQ צור קשר
SY89426JY - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JY

SY89426JY - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip Technology SY89426JY is a clock/frequency synthesizer IC engineered for SONET OC-3 and OC-12 clock generation. It accepts a 38.88MHz-to-77.76MHz reference input and produces a maximum 622.08MHz clock, with documented TTL input and PECL/TTL output interfaces. The device is packaged in a 28-pin leaded chip carrier, identified by distributors as 28-LCC (J-Lead). Its core role is to derive a high-speed, phase-aligned telecommunications clock from a lower-frequency reference while supporting high-speed digital interfaces. A clock synthesizer is a timing IC that generates, multiplies, or distributes clock signals according to a defined frequency relationship. In the broader semiconductor hierarchy, this product is a clock and timing IC, then a frequency synthesizer, and finally a SONET line-rate clock-generation component. This classification matters because telecom designs require deterministic relationships among reference, payload, and line clocks rather than a general-purpose oscillator. The SY89426JY targets the 51.84MHz, 155.52MHz, 311.04MHz, and 622.08MHz SONET domain through its supported generation function. Verified source data identifies one clock circuit, no PLL, a TTL reference input, PECL and TTL outputs, a maximum frequency of 622.08MHz, and a 28-LCC package. The absence of a PLL is a defining architectural constraint: the synthesizer relies on a supplied reference rather than a phase-locked loop. Distributor descriptions further identify the part as lead-free and intended for industrial-temperature operation, but the supplied evidence does not expose voltage limits, supply current, jitter, output levels, pin names, or complete timing tables. The device is suitable for SONET OC-3 and OC-12 transport equipment, optical-network terminals, line cards, clock-distribution modules, and test equipment that require a 622.08MHz clock. Its multiple logic interfaces allow integration where the next stage accepts PECL or TTL. Because high-speed edges and propagation delays can affect timing integrity, the PCB must provide controlled impedance, short traces, solid return paths, and clean separation between clock and data or noisy power circuitry. When designing around SY89426JY, verify every supply rail, logic threshold, decoupling value, and output termination against the manufacturer datasheet before schematic release. Do not assume generic PECL or TTL termination because device-specific output topology and board-level loading are not present in the supplied data. Differential-clock standards, such as the CML interface referenced by the retrieved datasheet result, may not be available from this part even though CML is common in related SONET devices. This page combines verified distributor specifications, source-qualified data gaps, application context, and replacement constraints. It also distinguishes a true drop-in replacement from a merely functional clock synthesizer, since same-package status, pin compatibility, electrical ranges, and lifecycle availability must all be confirmed before substitution.

RFQ צור קשר
SY89429AJZ - 800MHz Programmable Clock Synthesizer | Microchip
SY89429AJZ

SY89429AJZ - 800MHz Programmable Clock Synthesizer | Microchip

The Microchip Technology SY89429AJZ is a programmable frequency synthesizer IC capable of operating up to 800 MHz in a 28-LCC J-lead surface-mount package. It uses Precision Edge architecture, supports PECL inputs and outputs, accepts a selectable PECL or crystal-oscillator input interface, and includes a frequency-divider function for clock-generation and timing systems. A frequency synthesizer is a clock-and-timing semiconductor that generates or transforms an output clock from a stable reference. Its hierarchy extends from a frequency synthesizer to a PLL-based clock generator, clock-and-timing IC, and integrated circuit. This distinction matters because the SY89429AJZ is intended for distributed systems requiring programmable frequency relationships, multiple standard logic levels, and dedicated clock outputs rather than a fixed-frequency oscillator. The principal device characteristics include an operating frequency of up to 800 MHz, a programmable synthesizer range identified as 25 MHz to 400 MHz, PECL-compatible interfaces, and a selectable reference-input arrangement supporting PECL or crystal-oscillator sources. The integrated divider adds useful clock-generation flexibility, while the 28-LCC package provides a leaded surface-mount option for systems that prefer a mechanically robust package over a leadless land pattern. Precision Edge architecture is the central implementation detail identified for this device. The architecture supports the high-performance clock-generation role of the SY89429AJZ and is intended for applications such as telecommunications timing, data-conversion clocking, network equipment, and test instrumentation. PECL interfaces are particularly useful where a system already operates with ECL-family signaling and requires the clock synthesizer to integrate into that logic environment without adding level-conversion stages. Typical uses include low-jitter clock generation, frequency multiplication and division, synchronous digital-system timing, and clock distribution for communication and instrumentation equipment. Designers can also place the device ahead of a downstream divider network when a system requires several related frequencies derived from one reference. PECL interface compatibility can simplify interconnects when the synthesizer and receiving logic share compatible termination and biasing arrangements. The primary design consideration is PCB implementation of a 28-LCC J-lead package at high clock rates. Trace routing, return paths, decoupling, input/output termination, and reference-source stability directly affect signal integrity. Follow the manufacturer datasheet for the exact pin assignments, recommended application circuit, component values, and layout constraints before releasing a production board. This product page combines the manufacturer-facing device description with package, application, procurement, and replacement guidance. It also distinguishes the electrically identified SY89429AJZ from its SY89429AJZ-TR ordering variant and separates verified drop-in alternatives from generic cross-reference search tools that do not establish pin compatibility.

RFQ צור קשר
SY89429AZC - 400MHz Programmable Clock Synthesizer | Microchip
SY89429AZC

SY89429AZC - 400MHz Programmable Clock Synthesizer | Microchip

The Microchip SY89429AZC is a programmable frequency synthesizer covering 25 MHz to 400 MHz, with differential PECL outputs and ±25 ps peak-to-peak output jitter. The device is housed in a 28-SOIC package measuring 7.50 mm wide and is categorized as a clock-generation, PLL, and frequency-synthesis IC. A programmable frequency synthesizer generates one or more clock signals from a controlled internal reference. Within the clock and timing hierarchy, it sits above a crystal oscillator and below the clock-distribution circuits used by processors, transceivers, converters, and test equipment. Its synthesized architecture allows the output frequency to be set through an external controller rather than remaining fixed at the reference frequency. The SY89429AZC provides a serial three-wire programming interface and a parallel interface for power-on configuration. According to the Micrel Semiconductor data sheet, the serial interface uses a 14-bit shift register, while S_CLOCK shifts data on each rising edge and S_LOAD captures the configuration on its HIGH-to-LOW transition. An internal quartz reference supports autonomous clock generation without requiring an external frequency reference. Output performance is centered on low jitter. The differential PECL outputs reach a peak-to-peak jitter of ±25 ps at 400 MHz, making the device suitable for timing systems requiring precise edge placement. The synthesizer also features minimal frequency overshoot, an important behavior for avoiding transient frequency excursions during frequency transitions or clock startup. The device is suited to communication equipment, high-speed digital systems, data converters, test and measurement instrumentation, and clock-generation subsystems. Differential PECL outputs can feed line receivers or downstream clock buffers, while programmable operation permits different frequencies to be selected for multiple board-level timing requirements. The 28-SOIC package supports conventional surface-mount assembly. Designers should use the complete pin-description and connection tables in the Microchip data sheet when assigning tracks and selecting interface termination. Differential output routing should be short and impedance-controlled, and unused inputs should be handled according to the device recommendations. Programming signals and clock outputs should be separated from sensitive analog paths to reduce coupling. This page combines the device's documented frequency, interface, jitter, output, package, and compliance characteristics with engineering guidance for programming, layout, signal integrity, and sourcing. It also distinguishes exact catalog information from parameters that require confirmation against the manufacturer data sheet before a production design is released.

RFQ צור קשר
SY89429VZC - 400MHz Programmable Clock Synthesizer | Microchip
SY89429VZC

SY89429VZC - 400MHz Programmable Clock Synthesizer | Microchip

The Microchip SY89429VZC is a programmable frequency synthesizer clock generator operating from a 5V or 3.3V supply, with an internal VCO covering 400MHz to 800MHz and output frequency synthesis from 25MHz to 400MHz. The device provides differential PECL outputs, a serial 3-wire interface, a parallel interface for power-on operation, and an internal quartz reference. It is packaged in a 28-SOIC package measuring 7.50mm wide. A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference source. Clock generators and phase-locked-loop synthesizers are part of the broader Clock & Timing family within integrated circuits and power-management ecosystems. The SY89429VZC is intended for systems requiring programmable clocks, multiple output formats, or centralized timing distribution across high-speed digital logic. The main features of the SY89429VZC include support for both 3.3V and 5V power-supply options, differential PECL outputs to 400MHz, and low output jitter specified at ±25ps peak-to-peak. Its synthesized architecture helps provide programmable frequency generation, while the internal quartz reference supports autonomous clock generation. A serial 3-wire control path permits configuration from a host processor, and the parallel interface provides an alternative configuration path during power-on. The internal VCO operates from 400MHz to 800MHz, allowing the output frequency range to extend to 400MHz according to the product description. The differential PECL output arrangement is useful where a high-speed clock must be transferred through a PCB or short-distance interconnect with appropriate termination. The synthesizer architecture separates frequency programming from a fixed local oscillator, making the device suitable for clocks that need adjustable rates rather than a single predetermined frequency. Typical uses include workstation and graphics pixel-clock generation, processor-based timing systems, communications equipment, and high-speed digital logic requiring a programmable differential clock. The part can also be used in networking equipment, test systems, and embedded platforms where a system clock must be adjusted according to operating mode or external reference conditions. Differential PECL outputs are particularly appropriate for clock distribution over controlled interconnects when the receiver and board characteristics are accounted for. Designers should verify the required output frequency, supply voltage, interface timing, and output termination before finalizing a board layout. PECL outputs require correct biasing and signal-referenced termination in accordance with the manufacturer application guidance. The 28-SOIC footprint also requires adequate spacing for power and ground connections, with careful routing intended to reduce clock distortion and crosstalk. The manufacturer datasheet is the controlling reference for pin assignments, programming sequences, and electrical limits. This product page combines the key SY89429VZC specifications, source links, interface details, and design considerations to support faster engineering review. It emphasizes the distinctions that matter when evaluating a programmable clock synthesizer: supply compatibility, synthesis range, jitter, control interfaces, output standard, and package constraints.

RFQ צור קשר
SY89430VJC - 950 MHz Clock Synthesizer | Microchip
SY89430VJC

SY89430VJC - 950 MHz Clock Synthesizer | Microchip

The Microchip Technology SY89430VJC is a programmable frequency synthesizer covering 50 MHz to 950 MHz, with 5 V and 3.3 V supply options and differential PECL outputs in a 28-pin PLCC J-lead package. It is designed for clock and timing systems requiring low output jitter and flexible frequency programming. A frequency synthesizer generates or distributes a stable clock derived from a controllable reference source. Within clock and timing electronics, the SY89430VJC belongs to the PLL and clock-generator hierarchy and supports serialized or parallel configuration, allowing it to serve as the timing backbone for communications, instrumentation, industrial control, and test systems. Key features include a synthesized architecture, minimal frequency over-shoot, a 3-wire serial interface, a parallel interface for power-on configuration, and an internal quartz reference. Differential PECL outputs provide a maximum frequency of 950 MHz, while the specified peak-to-peak output jitter is no more than 25 ps. These characteristics support high-speed clocking requirements where timing margin and reference stability are important. The device accepts either 5 V or 3.3 V operation, depending on the selected configuration, and its broad tuning range allows one clock architecture to cover multiple system frequencies. The serial interface captures programmed values when the load signal changes state, making it practical for controlled test and measurement setups. A parallel power-on interface offers an alternative configuration path when the required divider and frequency settings are fixed in the system. Typical uses include laboratory clock sources, communications equipment, semiconductor test systems, frequency-generation instrumentation, and industrial data-acquisition platforms. The differential PECL interface is particularly appropriate for circuits designed around high-speed ECL-compatible clocking, although downstream logic compatibility must be confirmed against voltage and termination requirements. Layout should preserve short, controlled-impedance clock paths and keep the reference, power, and decoupling connections close to the device. Differential routing must maintain consistent spacing and termination, and unused clock outputs should be handled according to the manufacturer datasheet. Adequate bypass capacitance and a clean reference path help preserve low jitter and avoid unexpected overshoot during frequency transitions. This page combines the programming features, package information, clocking characteristics, application guidance, and engineering considerations needed to evaluate the SY89430VJC. It also distinguishes the verified device capabilities from unverified details, helping engineers move from component selection to a correctly implemented 950 MHz clock source.

RFQ צור קשר
SY89430VZC - 950 MHz Programmable Clock Synthesizer | Microchip
SY89430VZC

SY89430VZC - 950 MHz Programmable Clock Synthesizer | Microchip

The Microchip Technology SY89430VZC is a programmable frequency-synthesizer clock IC operating up to 950 MHz and packaged in a 28-pin SOIC. It provides a selectable 5 V or 3.3 V operating supply, a VCO covering 400 MHz to 950 MHz, and programmable output frequencies from 50 MHz to 950 MHz. The device also supports serial and parallel configuration interfaces for system clock generation and programmable frequency control. A frequency synthesizer is a timing IC that uses a voltage-controlled oscillator, or VCO, and phase-locked-loop techniques to generate stable clock signals at programmable frequencies. It belongs to the clock and timing IC hierarchy, where it complements crystal oscillators, dividers, buffers, jitter cleaners, and clock distribution circuits. The SY89430VZC is intended for designs requiring multiple derived clocks, flexible frequency selection, or digitally controlled clock generation within a compact surface-mount package. The principal feature of the SY89430VZC is its broad 950 MHz upper operating frequency. Its internal VCO spans 400 MHz to 950 MHz, while programmable synthesis covers a 50 MHz to 950 MHz output range. Configuration through serial and parallel interfaces allows system firmware or fixed hardware control to select operating parameters. A selectable 3.3 V or 5 V supply also permits integration into both 3.3 V and 5 V digital systems when the remaining interface and output requirements match. The 28-SOIC package measures 7.50 mm in body width and is identified by the source listing as a 0.295-inch-width device. Its 28-pin footprint provides connections for power, grounding, configuration, clock outputs, and associated control functions. Exact pin assignments, output-drive characteristics, phase-noise values, reference requirements, and timing limits should be taken from the manufacturer pin-description and AC-parameter tables before the device is placed in a production schematic. Typical applications include communications infrastructure, serial-interface clocking, high-speed digital test equipment, embedded processing systems, and clock-generation subsystems. In each case, the device can serve as the programmable timing source when a system needs more flexibility than a fixed-frequency crystal oscillator. The 50 MHz to 950 MHz synthesis range supports high-speed reference and communication-clock architectures without changing the physical package. Layout is critical because a high-frequency oscillator and digital configuration signals must be isolated from sensitive analog or high-speed data paths. Place the device close to its decoupling network, route configuration signals away from oscillator-related nodes, and observe the grounding and return-current recommendations in the manufacturer datasheet. Validate output jitter, phase noise, rise time, load capability, and reference stability in the final load configuration. This product record combines the manufacturer datasheet, distributor technical summaries, package information, and design-focused guidance for engineers evaluating the SY89430VZC. It also distinguishes the programmed frequency range from the VCO range and highlights configuration, layout, and validation issues that are important when comparing programmable clock synthesizers.

RFQ צור קשר
SY89464UMG - 2:10 2 GHz LVPECL Clock Multiplexer | Microchip
SY89464UMG

SY89464UMG - 2:10 2 GHz LVPECL Clock Multiplexer | Microchip

The Microchip Technology SY89464UMG is a 2:10 differential clock multiplexer and 1:10 LVPECL fanout buffer operating up to 2 GHz, housed in a 44-VFQFN exposed-pad package. It accepts CML, LVDS, or PECL differential inputs and provides differential LVPECL outputs. The SY89464U architecture combines a 2:1 differential input multiplexer with ten output channels, allowing one of two clock sources to be selected and distributed without changing the output interface. A clock multiplexer is a timing-device category used to route one of multiple clock signals onto a downstream circuit while preserving differential signal integrity. Clock buffers extend a source across multiple loads, while a multiplexer adds source selection for redundant systems. The SY89464UMG therefore combines clock distribution and source switching in one timing IC, placing it within the hierarchy of clock multiplexer, clock buffer, clock and timing IC, and semiconductor. Key features include a 2:10 multiplexer configuration, operation to 2 GHz, differential input support, differential LVPECL outputs, low-jitter operation, internal termination, and a runt-pulse eliminator. The 2:1 input stage is optimized for redundant-source switchover, where a system may switch between primary and backup clocks. Its ten outputs support fanout to multiple destination circuits while retaining a common differential LVPECL interface. The SY89464U combines source selection with a 1:10 fanout stage rather than functioning as a simple single-input distributor. The manufacturer describes the product as a low-jitter 1:10 LVPECL fanout buffer with a 2:1 differential input multiplexer. Differential signal handling is particularly useful when the clock path must remain resistant to common-mode noise. The internal termination and runt-pulse elimination features help control reflection and unwanted narrow pulses in demanding backplane, telecommunications, and data-center clocking systems. Typical uses include redundant clock distribution in telecommunications equipment, server backplanes, network switches, test and measurement systems, and high-speed digital subsystems. A 2 GHz operating limit supports high-speed reference or forwarded clocks, while the ten LVPECL outputs can feed several endpoints from one selected source. The 44-VFQFN exposed-pad package provides the thermal-contact geometry needed for a multi-output high-speed device, although system-level thermal performance still depends on the PCB pad and copper design. PCB implementation should preserve differential impedance and minimize mismatch between the complementary clock traces. Place input and output decoupling near the corresponding device pins, provide a continuous ground reference, and connect the exposed pad to a properly designed ground plane using the manufacturer’s recommended land pattern. Differential input and output traces should have equal length and geometry, with return-path discontinuities minimized. Validate source-switchover timing, output jitter, and runt-pulse behavior at the intended clock frequency in the final system. This page consolidates the functional description, package information, sourcing guidance, verified drop-in relationship, and practical implementation considerations for the SY89464UMG. It is intended to help engineers identify whether the part fits a redundant differential-clock architecture before consulting the manufacturer datasheet and pin-description table for final PCB implementation.

RFQ צור קשר
SY89464UMY - 2:10 Clock MUX Fanout | Microchip Technology
SY89464UMY

SY89464UMY - 2:10 Clock MUX Fanout | Microchip Technology

The Microchip Technology SY89464UMY is a 2:10 clock multiplexer and 1:10 LVPECL fanout buffer operating up to 2 GHz in a 44-pin VFQFN exposed-pad package. It supports redundant-source switchover while providing ten 800 mV LVPECL outputs with rise and fall times guaranteed below 220 ps. A clock multiplexer is a timing IC that selects between multiple clock sources and routes the selected signal to downstream circuits. A clock fanout buffer combines that selection function with multiple low-voltage positive ECL outputs. Together, these devices form the clock and timing hierarchy within semiconductor, interface IC, and clock-and-timing component categories. The SY89464UMY is designed for systems that need controlled source switching, distribution, and low-skew clock delivery. The differential input architecture uses a three-pin internal termination arrangement that accepts AC- or DC-coupled signals as small as 100 mV, or 200 mV peak-to-peak, without external level-shifting or termination networks. Its ten LVPECL outputs are specified at 800 mV into 100-ohm-compatible loads. This combination makes the device useful where a compact, high-speed clock tree must tolerate small-amplitude source signals while producing standard high-speed differential-clock outputs. The SY89464UMY is identified as a low-jitter 2:1 differential-input multiplexer with 1:10 LVPECL fanout. Its operating frequency reaches 2 GHz, and the 44-VFQFN exposed-pad package provides a high pin count for separate clock outputs and power-management connections. The exposed thermal pad also supports heat transfer from the device when output-current and switching activity are significant. Typical uses include redundant reference-clock distribution, high-speed telecommunications timing, server and network-clock fanout, FPGA reference-clock systems, and instrumentation requiring selectable clock sources. In a redundant system, the multiplexer can switch between two independent inputs while the fanout section drives multiple destination devices without requiring a separate one-to-many distribution buffer. Designers should use the pin-description and typical-application tables in the manufacturer datasheet to assign inputs, enables, power rails, and output terminations. Differential routing should be short and symmetrical, and the exposed pad should be connected to the appropriate ground plane with sufficient thermal copper. Decoupling must follow the datasheet recommendations to preserve low-jitter behavior. This page organizes the SY89464UMY’s clock architecture, electrical characteristics, application fit, confirmed same-package alternative, and PCB considerations into an engineering-focused guide that extends beyond a basic catalog listing.

RFQ צור קשר
SY89465UMY - 2:10 LVDS Clock Fanout | Microchip
SY89465UMY

SY89465UMY - 2:10 LVDS Clock Fanout | Microchip

The Microchip Technology SY89465UMY is a high-speed clock multiplexer and fanout device combining a 2:1 runt pulse eliminator multiplexer with a 1:10 LVDS fanout in a 44-VFQFN exposed-pad package. It operates up to 2 GHz and accepts CML, LVDS, or PECL inputs while providing LVDS-compatible outputs. The device is intended for clock distribution systems where one source must be selected between two clocks before being distributed to multiple destinations. A clock multiplexer is a timing device that routes one of several input signals to a shared output path. Clock fanout extends one signal across multiple outputs so that all receivers see a closely related copy. The SY89465UMY combines these functions into one device: a 2:1 Runt Pulse Eliminator multiplexer first selects the required clock, and the 1:10 fanout then generates ten LVDS-compatible outputs. This integration reduces the number of separate clock-routing components required in a multi-load backplane or processor system. The SY89465UMY operates from a 2.375 V to 2.625 V supply and supports input logic levels of CML, LVDS, and PECL. Its LVDS outputs use rise and fall times guaranteed to be less than 220 ps, as stated for the SY89465U family on the Microchip product page. The 2 GHz maximum frequency makes the device suitable for high-speed communications, networking, storage, and test-and-measurement clock trees. The 44-VFQFN package provides 44 electrical positions and an exposed pad for thermal management in space-constrained designs. Microchip identifies the device as part of its Micrel Precision Edge high-speed product line. The combination of a runt-pulse-eliminating multiplexer and ten-output fanout allows a system designer to distribute a selected high-speed clock without using separate multiplexer and fanout stages. Typical uses include network switch and router backplanes, telecommunications line cards, server clock distribution, high-speed test equipment, and clock trees for parallel data converters. The multiple output count supports several receivers connected at controlled distances, while the 2:1 selection function supports clock switching, redundancy, or source arbitration. Careful layout is essential because LVDS clock signals depend on controlled differential impedance and short, symmetric routing. Place the decoupling capacitors close to the supply pins, route differential pairs over a continuous reference plane, and avoid introducing unmatched stubs. Confirm the output termination scheme and receiver loading against the system-level clock architecture before releasing the PCB layout. This page combines the technical specifications, sourcing information, application context, and drop-in replacement analysis for the SY89465UMY. It also identifies design trade-offs that are not apparent from a distributor category listing, including fanout architecture, supported input standards, package thermal considerations, and practical LVDS routing constraints.

RFQ צור קשר
SY89467UHY - 1:20 LVPECL Clock Fanout | Microchip
SY89467UHY

SY89467UHY - 1:20 LVPECL Clock Fanout | Microchip

The Microchip Technology SY89467UHY is a 2.5 V/3.3 V LVPECL clock fanout buffer with a 2:1 differential input multiplexer, 20 LVPECL outputs, and a maximum clock frequency of 2 GHz in a 64-TQFP exposed-pad package. It is designed for systems that must select between two differential clock sources and distribute the selected clock across multiple high-speed loads. A clock fanout buffer is a clock-and-timing integrated circuit that reproduces a high-speed differential clock with low skew and controlled impedance. This device combines that distribution function with a 2:1 input multiplexer. The resulting topology is useful when a serializer, transceiver, retimer, FPGA, or communication engine must switch between two clock domains while maintaining a consistent LVPECL interface. Within the product hierarchy, it is a clock buffer and clock multiplexer, both belonging to clock-and-timing ICs and ultimately to the broader semiconductor category. The SY89467UHY provides 2:1 differential input selection, a 1:20 output fanout ratio, and operation from a 2.5 V or 3.3 V supply. Its listed operating-temperature range is -40°C to +85°C, while distributor records identify the device as a 2 GHz, 64-TQFP exposed-pad clock fanout buffer with multiplexer functionality. These characteristics make the part relevant to high-speed digital systems requiring more output copies than a simple one-to-one clock buffer can supply. A particularly important feature is Fail-Safe Input protection. According to the Microchip Technology product page, the FSI function helps prevent metastable output conditions when the selected input clock fails to a DC voltage. This behavior supports dependable system operation during clock-source faults, although designers still need to evaluate startup, input biasing, and source-switching requirements against the complete manufacturer application guidance. Typical uses include high-speed serial links, parallel data converters, telecommunications equipment, test-and-measurement instrumentation, FPGA clock distribution, and data-converter clocking. The 20-output architecture can feed several parallel LVPECL destinations from one selected differential source, while the multiplexer permits redundancy or source selection without requiring two complete downstream clock trees. The main design consideration is that the exposed-pad package requires careful PCB layout for thermal and electrical performance. Place the device close to the clock source and destinations, keep high-speed traces short and impedance controlled, provide the required decoupling and termination, and connect the exposed pad to the recommended ground-plane construction. Confirm all pin assignments, LVPECL interface details, and unused-output termination against the manufacturer datasheet before fabrication. This product record combines the manufacturer's functional description with distributor electrical and package details, drop-in replacement information, a parameter comparison, and practical clock-distribution design guidance. It is intended to help engineers identify the correct voltage, package, fanout, multiplexer, and fault-tolerance requirements before integrating the SY89467UHY into a high-speed clock architecture.

RFQ צור קשר
SY89468UHY - 2:20 1.5 GHz LVDS Clock Fanout | Microchip
SY89468UHY

SY89468UHY - 2:20 1.5 GHz LVDS Clock Fanout | Microchip

The Microchip Technology SY89468UHY is a 2:20 LVDS fanout buffer with a 2:1 differential input multiplexer, operating from a 2.5 V ±5% supply and supporting input clock frequencies up to 1.5 GHz. The device is packaged in a 64-pin TQFP with an exposed pad. It provides twenty LVDS-compatible clock outputs, accepts AC- or DC-coupled differential signals as small as 100 mV (200 mVPP), and guarantees output rise and fall times below 270 ps. A clock fanout buffer is a clock-management IC that distributes one or more source clocks to multiple destinations while preserving signal amplitude, edge timing, and clock polarity. The SY89468UHY belongs to the hierarchy of clock buffers and drivers, clock distribution ICs, timing-control devices, and broader semiconductor components. Its differential multiplexer allows a system to select between two clock inputs before distributing the selected clock across twenty outputs. The key features include a 2:1 differential input multiplexer, a 1:20 fanout ratio, LVDS-compatible outputs, and a maximum listed operating frequency of 1.5 GHz. The internal three-pin termination architecture allows small-amplitude differential inputs without an external termination resistor network in the signal path. Fail-Safe Input behavior is designed to prevent metastable output conditions when the selected differential input fails to a DC voltage. Internally, the part combines a selectable differential input stage, clock distribution circuitry, and twenty low-voltage differential outputs. The output stage is specified for rise and fall times below 270 ps, making it appropriate for high-speed clock-distribution networks. The 2.5 V ±5% supply requirement supports integration into compact, high-speed digital systems while the exposed pad provides a thermal path from the device to the PCB. Typical uses include telecommunications equipment, industrial control systems, data-conversion equipment, high-speed computing, network timing, and instrumentation. A single SY89468UHY can feed twenty clock destinations when one selected differential source is sufficient, while the multiplexer supports source redundancy or clock switching between two domains. Care is required to preserve LVDS signal integrity through controlled-impedance routing and correctly terminated differential clock networks. For PCB implementation, place the device close to the clock source, use matched routing for each differential pair, provide a continuous ground reference, and connect the exposed pad to the appropriate ground plane. Verify input amplitude, common-mode voltage, output termination, and downstream rise-time requirements before releasing the layout. This page combines the device function, verified timing and supply characteristics, sourcing guidance, and practical layout considerations to support clock-tree design. It also distinguishes the verified SY89468UHY ordering code from related manufacturer ordering and comparison candidates, helping engineers determine whether a proposed replacement preserves the required footprint and electrical behavior.

RFQ צור קשר
SY89529LTC - 200MHz Spread-Spectrum Clock | Microchip Technology
SY89529LTC

SY89529LTC - 200MHz Spread-Spectrum Clock | Microchip Technology

The Microchip Technology SY89529LTC is a 3.3 V precision spread-spectrum clock synthesizer that generates a 200 MHz LVPECL output from a low-cost 16.66 MHz crystal. It is supplied in a 32-pin TQFP package and provides 0.5% spread-spectrum modulation control, which can reduce electromagnetic interference by more than 7 dB. The device also supports LVTTL and LVCMOS-compatible operation, making it suitable for systems that require a low-noise, high-frequency clock without the power cost of a large FPGA clock solution. A clock synthesizer is a timing IC that uses a frequency reference, typically a crystal oscillator, to generate one or more stable clock outputs. Clock synthesizers form part of the clock and timing hierarchy within integrated circuits and are commonly used to supply deterministic reference frequencies to processors, communications equipment, storage controllers, and test systems. The SY89529LTC combines a precision phase-locked loop with spread-spectrum modulation in a single surface-mount package. The principal features of this clock synthesizer are its 200 MHz maximum output frequency, 16.66 MHz crystal reference input, 3.3 V low-voltage supply operation, and selectable 0.5% spread-spectrum modulation. The LVPECL output is suited to high-speed digital interconnect, while the LVTTL and LVCMOS-compatible capability broadens its usefulness across mixed-signal and legacy digital systems. A surface-mount 32-TQFP package supports compact assembly on multilayer printed circuit boards. Technically, the SY89529LTC multiplies the 16.66 MHz reference to produce a 200 MHz clock while adding controlled frequency dither through spread-spectrum modulation. This technique deliberately distributes clock energy across a frequency band rather than concentrating it around one carrier frequency. The result can reduce narrowband electromagnetic emissions and improve system-level EMI margin. The 0.5% modulation setting should be evaluated against receiver timing requirements and downstream jitter specifications because the frequency excursion also creates additional timing uncertainty. Typical uses include high-speed communications equipment, industrial control systems, network interface modules, storage systems, and clock-distribution trees for FPGA or ASIC-based designs. Its 200 MHz LVPECL output is especially relevant when the receiving logic requires a differential high-speed clock. It may also be used in test and measurement equipment that needs a precise reference clock with adjustable spectral spreading. When laying out the circuit, place the crystal, decoupling capacitors, clock output components, and termination network according to the manufacturer datasheet. Keep the reference oscillator path short, provide clean ground returns, and use termination appropriate to the LVPECL interface. Validate both spread-spectrum enabled and disabled operation across the required temperature range because the modulation envelope changes the instantaneous output frequency. This product page combines the manufacturer-family characteristics, verified distributor listing information, application guidance, and pin-compatible replacement criteria in one place. It also distinguishes documented specifications from parameters that require confirmation from the datasheet, helping engineers evaluate the SY89529LTC for new clock-tree, EMI-control, and high-speed digital-interface designs.

RFQ צור קשר
SY89529LTH - 200 MHz LVPECL Clock Synthesizer | Microchip
SY89529LTH

SY89529LTH - 200 MHz LVPECL Clock Synthesizer | Microchip

Microchip SY89529LTH is a 3.3 V precision spread-spectrum clock synthesizer with a maximum operating frequency of 200 MHz, one synthesizer circuit, PLL capability, crystal input, and LVPECL output in a 32-TQFP package. The device belongs to the Precision Edge clock-generation family and is designed for systems requiring a stable, low-jitter clock derived from a crystal reference. A clock synthesizer is a timing IC that generates or distributes clock signals according to a defined frequency and phase relationship. In this case, the SY89529LTH combines a phase-locked loop with a crystal input and LVPECL output. LVPECL is a differential, Emitter-Coupled Logic signaling standard commonly used in high-speed communications, test equipment, servers, and data-center clock trees. The device is therefore positioned within the hierarchy of clock and timing ICs, oscillator circuits, frequency synthesizers, and power-management-dependent semiconductor systems. The principal documented characteristics include a 200 MHz maximum frequency, a 3.3 V supply, a PLL, a crystal reference input, LVPECL outputs, and one clock-synthesis circuit. Spread-spectrum clocking can reduce electromagnetic interference peaks by distributing clock energy across a frequency band. This is useful where reducing narrowband emissions is more important than requiring a perfectly fixed output frequency. The 32-TQFP package provides a surface-mount implementation, but its exposed thermal and routing requirements must be assessed against the manufacturer's layout guidance. At the architectural level, the synthesizer locks its internally generated clock to the crystal reference through the PLL. The resulting differential clock supports high-speed backplane, processor, networking, and instrumentation clock trees. Because the output is LVPECL, receiver termination, trace impedance, and common-mode voltage must be engineered carefully. Accurate clock amplitude and deterministic jitter performance are especially important when the device supplies timing to high-speed serial links, although exact jitter, output-count, divider, and reference-input details must be confirmed from the manufacturer datasheet. Typical applications include telecommunications equipment, network-interface clocking, server and storage systems, test-and-measurement instrumentation, and industrial control electronics. In each case, the crystal reference establishes the stable frequency source while the PLL generates the required clock waveform. The 200 MHz ceiling makes the part relevant to systems operating below or around that frequency rather than ultra-high-rate optical or memory interfaces requiring much higher clock rates. A critical design step is to follow the manufacturer pin-description and reference-circuit tables when assigning crystal, supply, ground, and LVPECL connections. Keep the crystal loop compact, provide the required bypass capacitance, maintain controlled differential impedance, and terminate LVPECL inputs as specified by the receiving circuit. Confirm worst-case startup, jitter, output amplitude, supply sensitivity, and temperature behavior before releasing a production design. This page consolidates the documented clock-generator characteristics, lifecycle information, sourcing details, package mapping, design guidance, and verified drop-in comparison context. It also distinguishes the exact bulk MPN from tape-and-reel order codes and identifies technical details that require confirmation from the manufacturer datasheet before layout or qualification.

RFQ צור קשר
SY89529LZC - 200MHz Spread-Spectrum Clock | Microchip
SY89529LZC

SY89529LZC - 200MHz Spread-Spectrum Clock | Microchip

The Microchip Technology SY89529LZC is a 3.3 V precision spread-spectrum clock synthesizer with a maximum output frequency of 200 MHz, one clock circuit, a crystal input, and an LVPECL output in a 28-pin SOIC package. It is designed to reduce electromagnetic interference while supporting LVTTL and LVCMOS-compatible interfacing. A spread-spectrum clock synthesizer is a clock-generation IC that intentionally varies clock timing over a controlled range to spread switching energy across a wider frequency band. This technique reduces the peak spectral concentration associated with a fixed-frequency clock. In the system hierarchy, the SY89529LZC belongs to the clock and timing IC family, combining a phase-locked loop with precision frequency generation and spread-spectrum modulation. Key features include low-voltage 3.3 V operation, operation up to 200 MHz, and generation of a precision LVPECL output from a low-cost 16.66 MHz crystal. The spread-spectrum modulation control supports up to 0.5% modulation. According to the device feature description, this modulation can reduce EMI by 7 dB, making the device useful in systems where reducing narrowband clock harmonics is important. The architecture uses a PLL-based frequency synthesizer with one clock output. The crystal input establishes the stable reference from which the internal PLL produces the higher-frequency clock. An LVPECL output is suited to high-speed digital links when the receiving equipment supports ECL-compatible levels and proper termination. The LVTTL and LVCMOS-compatible feature broadens its usefulness across clock-distribution and digital-interface environments. Typical uses include communication equipment, data-processing systems, networking infrastructure, test and measurement instruments, and industrial electronics. In these systems, the device can provide a common local clock while reducing the peak spectral energy that a fixed-frequency oscillator would produce. The 28-pin SOIC format also supports conventional surface-mount PCB assembly. Designers should use the manufacturer’s pin-description table when assigning PCB nets and verify the crystal-load capacitance, termination, output impedance, and decoupling requirements. LVPECL outputs generally require correct source termination and compatible receiver thresholds; incorrect termination can create reflections, distorted edges, or excessive current. The spread-spectrum percentage should also be selected with system timing margins and downstream clock-domain requirements in mind. This page combines the device’s published clocking characteristics with procurement guidance, comparison fields, pin-package considerations, and practical design notes. It also distinguishes documented functions from parameters that must be confirmed in the manufacturer datasheet before a new PCB layout is released.

RFQ צור קשר
SY89529LZH - 200MHz Spread-Spectrum Clock | Microchip
SY89529LZH

SY89529LZH - 200MHz Spread-Spectrum Clock | Microchip

The Microchip SY89529LZH is a 3.3 V precision spread-spectrum clock synthesizer that generates a 200 MHz LVPECL output from a 16.66 MHz crystal reference. It is packaged in a 28-pin SOIC and includes a phase-locked loop with programmable spread-spectrum modulation control. The device operates from 3.135 V to 3.465 V and provides LVTTL and LVCMOS-compatible input and output options. A clock synthesizer is an integrated timing device that converts a stable reference frequency into one or more controlled output frequencies. The SY89529 belongs to the hierarchy of clock and frequency synthesizer ICs, PLL-based clock generators, and timing-control semiconductors. Its spread-spectrum operation varies the output frequency over time, reducing energy concentration at a single clock frequency and helping lower radiated emissions from systems that use the clock as a data source. Key features include a maximum output frequency of 200 MHz, a PLL architecture, a crystal-based reference input, and LVPECL clock output. The spread-spectrum modulation is adjustable up to 0.5%, while spread-spectrum modulation can provide a 7 dB reduction in EMI. These characteristics make the device useful where both precise edge placement and controlled spectral spreading are required. The SY89529 uses a PLL to develop a high-frequency clock from the 16.66 MHz crystal source. This architecture permits the synthesizer to produce a much higher output frequency than its reference while maintaining a controlled relationship between input and output edges. The LVPECL output is suited to high-speed digital systems operating on a low-voltage positive-referenced ECL level, whereas the LVTTL and LVCMOS-compatible interfaces broaden the supported logic environment. Typical uses include processor and communications-clock distribution, high-speed serial links, network interface equipment, and embedded systems requiring reduced electromagnetic emissions. The 200 MHz LVPECL output can feed retimers, serializers, FPGAs, or other clock-domain components. The 28-pin SOIC package permits conventional surface-mount assembly, although careful decoupling and controlled-impedance routing remain essential at 200 MHz. Designers should follow the manufacturer datasheet for reference-crystal selection, loop-filter recommendations, power-supply sequencing, and output termination. LVPECL outputs generally require an appropriate termination network and compatible biasing arrangement. PCB placement should minimize clock-loop area, keep the crystal path compact, and provide low-impedance ground and power-return paths to limit jitter and radiated emissions. This product summary consolidates the device specifications, lifecycle status, application guidance, and design considerations engineers need to evaluate the SY89529LZH for spread-spectrum clock generation.

RFQ צור קשר