מוצרים (44,000+)

TAS5015PFB - 2-Channel 112dB Digital Audio PWM Processor | TI
TAS5015PFB

TAS5015PFB - 2-Channel 112dB Digital Audio PWM Processor | TI

Texas Instruments TAS5015PFB is a 2-channel true digital audio amplifier digital audio PWM processor with 112 dB dynamic range, THD+N below 0.01%, and 90% power efficiency into an 8-ohm load. The device accepts 24-bit input data and supports 176.4 kHz operation, making it suitable for high-resolution digital audio amplification systems. It is packaged in a 48-TQFP (7x7 mm) surface-mount package. A digital audio PWM processor is a specialized audio signal-processing IC that accepts digital audio data and controls power-converter switching to reproduce an analog audio waveform at the speaker or headphone output. Within the product hierarchy, it combines a digital signal processor, a digital audio interface, and a class-D-style PWM power stage, while remaining distinct from conventional analog audio amplifiers. The TAS5015PFB is designed to place amplification and digital processing close to the load, reducing noise susceptibility in sensitive audio paths. The principal performance features include 112 dB dynamic range, THD+N below 0.01%, 24-bit input-data support, and 176.4 kHz operation. Its 90% efficiency into an 8-ohm load reduces the heat generated during high-output audio playback compared with less efficient amplification approaches. The 48-TQFP (7x7 mm) package provides a defined surface-mount footprint for professional audio, home-theater, communication, and embedded audio equipment. The device combines digital audio processing with PWM output generation, allowing system-level features such as digital volume control and signal conditioning to be handled inside the amplification stage. This architecture is useful when a product requires high-resolution audio data to remain digital through much of the signal chain. Exact pin assignments, control-register details, thermal limits, and application-specific output-stage requirements should be confirmed against the manufacturer datasheet and pin-description table. Typical applications include powered speakers, soundbars, home-theater receivers, digital audio racks, professional monitor systems, and embedded audio products. The 2-channel configuration suits stereo systems, while the high dynamic range and low distortion target applications where audible noise or nonlinear distortion would compromise playback quality. The 90% efficiency rating into 8 ohms is particularly relevant to compact systems with limited thermal dissipation. When designing around TAS5015PFB, preserve the power and ground connections required by the PWM output stage, place output-filter and bypass components close to the package, and account for the heat generated at high output power. Confirm that the selected speaker impedance, supply voltage, output filter, and amplifier configuration match the datasheet guidance before production release. This page combines the confirmed device specifications, package information, drop-in alternative status, pricing structure, and practical design guidance for engineers evaluating the TAS5015PFB in digital audio amplifier designs.

RFQ צור קשר
TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI
TAS5026APAG

TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI

The TAS5026APAG is a six-channel digital audio PWM processor from Texas Instruments, part of the PurePath Digital™ family. It integrates a modulator that converts digital audio data into PWM signals for driving external power stages, enabling high-efficiency Class-D amplification. The device operates from a 3V to 3.6V supply and is packaged in a 64-pin TQFP (10x10 mm). It interfaces via I2C and I2S, making it suitable for multi-channel audio systems. A digital audio PWM processor is a specialized DSP that converts digital audio streams (e.g., I2S) into pulse-width modulated signals. These PWM signals drive switching power stages, which then feed speakers through passive LC filters. This architecture achieves high efficiency (>90%) compared to linear amplifiers, reducing heat and power consumption in consumer and professional audio equipment. Key features include six independent channels, I2C control for configuration, and I2S input for digital audio. The device supports sample rates up to 192 kHz and provides advanced processing like volume control and dynamic range compression. Its 64-TQFP package offers a compact footprint for multi-channel designs. Technically, the TAS5026APAG employs a digital modulator with noise shaping to achieve high signal-to-noise ratio. It is designed to work with TI's PurePath Digital power stages, such as the TAS5121, which can deliver up to 100W into 4Ω speakers. The PWM output is optimized for minimal distortion and jitter. Typical applications include home theater receivers, AV receivers, soundbars, and active speakers. The device's multi-channel capability and digital interface make it ideal for surround sound systems. It is also used in automotive infotainment and professional audio equipment. When designing with the TAS5026APAG, ensure proper decoupling of the 3.3V supply and careful PCB layout to minimize noise. The I2C interface allows real-time control of volume and mute functions. Note that the device is now obsolete, so consider alternative parts for new designs.

RFQ צור קשר
TAS5026IPAG - 6-Channel Digital Audio PWM Processor | TI
TAS5026IPAG

TAS5026IPAG - 6-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5026IPAG is a six-channel digital audio PWM processor designed for high-fidelity digital audio interfacing, with operation across sample rates from 32 kHz to 192 kHz. The device supports I2C and I2S interfaces and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. Its architecture converts digital audio streams into six independently addressed PWM output channels for multichannel audio systems. A digital audio PWM processor is an interface IC that accepts encoded digital audio data, processes that data internally, and generates PWM signals suitable for driving audio output stages. Within the signal chain, it sits between a digital audio source and the power amplifier or speaker-driver circuitry. Unlike a conventional audio DAC followed by a separate modulator, this integrated processor combines digital data handling and PWM generation in one device. The principal features of the TAS5026IPAG include six audio channels, digital I2S input, I2C control, and support for sample rates spanning 32 kHz through 192 kHz. These capabilities make the processor relevant to home-theater systems, multichannel powered speakers, active speaker arrays, and automotive audio designs. The broad sample-rate range supports conventional CD-rate audio as well as high-resolution PCM streams. Texas Instruments describes the TAS5026 as a PurePath Digital audio modulator IC. Its digital control interface allows an embedded controller or system-on-chip to configure operating behavior, while the I2S interface receives audio data from a digital source. Because PWM output generation is consolidated into the processor, system designers can evaluate the complete digital-to-PWM signal path before adding external amplification and loudspeaker stages. Typical applications include six-channel powered speakers, surround-sound receivers, active subwoofers, multimedia speaker systems, automotive head units, and home-audio distribution products. A typical implementation places the processor after an I2S-compatible audio source, connects I2C control lines to the system controller, and routes six PWM outputs toward amplifier inputs or external bridge drivers. PCB design must preserve the integrity of the digital audio and clock connections while keeping switching outputs away from sensitive analog and control paths. Decoupling should be placed close to the device pins, and ground-return paths should follow the manufacturer layout recommendations. The 10 mm by 10 mm TQFP footprint also requires adequate solderable area and careful inspection of fine-pitch joints after assembly. This product page combines the device identity, package information, interface characteristics, lifecycle details, and procurement workflow into a design-oriented reference. It also distinguishes the documented TAS5026 order variant from similarly named components and provides actionable guidance for PCB layout, digital-audio integration, and drop-in replacement assessment.

RFQ צור קשר
TAS5026PAG - 6-Channel Digital Audio PWM Processor | TI
TAS5026PAG

TAS5026PAG - 6-Channel Digital Audio PWM Processor | TI

The Texas Instruments TAS5026PAG is a 6-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It belongs to the digital signal processing and audio-control hierarchy, where a digital audio processor accepts digital audio information and controls an associated class-D-style PWM output stage. The device is supplied in tray packaging according to the published product listing. A digital audio PWM processor is a mixed-signal audio IC that combines digital processing, modulation control, and power-stage supervision. Its role differs from a conventional audio codec: instead of focusing only on analog-to-digital and digital-to-analog conversion, a PWM processor manages digital audio data, PWM modulation, output-stage control, and protection functions for multi-channel audio systems. The TAS5026PAG is therefore positioned as a central audio-control device within a larger digital amplification architecture. The principal feature of the TAS5026PAG is its six-channel digital audio processing architecture. This makes it relevant to designs requiring coordinated control of multiple audio outputs, including powered speakers, soundbars, home-theater equipment, and multichannel digital amplification systems. Its 64-pin TQFP package provides the connection density required for digital audio data, control signals, power-management interfaces, and external circuitry. Operationally, the processor separates digital audio command processing from the external power-amplifier stage. Digital audio information is processed before being converted into the switching-control information required by a PWM power stage. This architecture can simplify system partitioning when a design separates signal processing from high-current output amplification, while still requiring suitable external MOSFET stages and passive networks. Typical applications include digital active speakers, compact home-theater systems, multimedia speaker platforms, soundbar amplification, and other multichannel audio products. The processor is most appropriate when the product architecture already uses digital audio signals and PWM class-D output stages. It is less suitable for conventional analog-only amplifier designs that do not include a compatible digital control interface. The primary design consideration is PCB integration. Because the device controls a multichannel PWM audio architecture, its digital, analog, power, and return paths must be routed with care. Keep switching-current loops away from audio and control signals, use a continuous ground reference, place input and output decoupling close to the device, and follow the manufacturer datasheet layout and component recommendations for the selected power-stage topology. This page organizes the verified device identity, package information, source documentation, comparison candidates, and engineering guidance into a practical design reference. It also distinguishes confirmed drop-in replacements from comparison-only candidates, helping engineers determine whether a board-level substitution is technically justified before committing to a redesign.

RFQ צור קשר
TAS5026PAGR - 6-Channel Digital Audio PWM Processor | Texas Instruments
TAS5026PAGR

TAS5026PAGR - 6-Channel Digital Audio PWM Processor | Texas Instruments

Texas Instruments TAS5026PAGR is a six-channel digital audio PWM processor packaged in a 64-pin TQFP with a 10 mm by 10 mm body. It operates from a 3 V to 3.6 V supply and converts digital audio information into PWM-based drive signals for multichannel Class-D audio power stages. Its integrated processing architecture is intended to reduce the processing burden placed on an audio codec, DSP, or digital host while supporting compact, energy-efficient audio systems. A digital audio PWM processor is a specialized interface and signal-processing IC within the broader audio semiconductor hierarchy. It accepts encoded digital audio information and produces timing and control information suitable for a power-amplifier stage. In a typical multichannel audio design, the processor handles channel sequencing and PWM-related signal generation while an external power stage reconstructs the analog speaker waveform. This division separates digital control from high-current analog amplification. The TAS5026PAGR's principal identified characteristics are its six-channel architecture, PWM processing function, 3 V to 3.6 V operating supply, and 64-pin TQFP package. These parameters make it relevant to home-theater, automotive audio, powered-speaker, and other multichannel audio products. The surface-mount package supports automated assembly, while the low-voltage digital supply domain is compatible with contemporary portable and embedded audio systems. The processor's role is particularly useful when multiple audio channels must be controlled consistently. Six channels allow a compact design to manage several speaker zones or amplified outputs without relying on separate discrete timing circuitry. Because the device performs PWM-related processing rather than directly driving speaker outputs, designers still need suitable external power-amplifier circuitry and must preserve recommended clocking, grounding, and signal-routing practices from the manufacturer documentation. The TAS5026PAGR is appropriate for digital audio systems requiring six processed channels, especially products that combine digital source control with a multi-zone Class-D amplifier architecture. It can also support powered speakers, compact home-theater systems, automotive head-unit designs, and multimedia equipment where coordinated channel control and board-space efficiency are important. Layout planning should account for the 64-pin TQFP footprint, high-speed digital interconnects, supply decoupling, and the separation between sensitive processor signals and output stages driven at high current. Decoupling capacitors should be placed close to the supply pins, while clock and data traces should be routed with continuous return paths. The external amplifier design and its grounding strategy can materially affect the final noise and distortion performance. This product page combines the confirmed device classification, package information, supply range, sourcing structure, and practical implementation guidance. It also distinguishes the processor from the external power stage, explains where its role belongs in a digital Class-D signal chain, and identifies the checks engineers should complete before laying out a 64-pin mixed-signal audio board.

RFQ צור קשר
TAS5028APAG - 8-Channel Digital Audio PWM Processor | TI
TAS5028APAG

TAS5028APAG - 8-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5028APAG is an 8-channel digital audio PWM processor with I2C and I2S interfaces, a 3 V to 3.6 V operating supply range, and a 64-TQFP surface-mount package measuring 10 mm by 10 mm. It converts digital audio data into eight independent PWM outputs for multi-channel Class-D audio amplifier systems. A digital audio PWM processor is an audio interface and modulation IC positioned between a digital signal processor and a multichannel power-amplifier stage. It receives serialized digital audio information, formats it into the modulation signals required by the amplifier channels, and supports automatic control of individual output configurations. This function places the TAS5028APAG within the broader hierarchy of audio interface IC, signal-processing IC, and power-management semiconductor. The principal features include eight PWM output channels, support for both I2C and I2S digital-audio interfaces, operation from 3 V to 3.6 V, and an operating temperature range from 0 °C to 70 °C. The integrated eight-channel architecture reduces the number of separate digital audio modulators required in a surround-sound, home-theater, or multi-zone amplifier. Its 64-TQFP package provides a compact surface-mount solution for equipment with substantial channel count. The processor is intended to work with digital signal processors and audio power stages, allowing audio data, control information, and channel-specific modulation to share a compact digital control architecture. Automatic adjustment of control configurations can simplify system initialization and channel management. Designers should still verify amplifier compatibility, required control timing, and output behavior against the manufacturer datasheet before committing to a production board. Typical uses include 5.1-channel and 7.1-channel home-theater amplifiers, multi-zone audio systems, powered speakers, soundbars, and professional audio equipment. It is particularly useful when the source processor already outputs digital audio and the power amplifier stage expects PWM control signals rather than an analog audio input. PCB implementation requires careful separation between sensitive digital communication lines, supply routing, and high-current amplifier outputs. Although the TAS5028APAG itself is a digital controller, its I2C and I2S interfaces can be sensitive to clock jitter, ground bounce, and supply disturbances. Follow the pin-description table and recommended component-placement guidance in the manufacturer datasheet when assigning traces and decoupling. This product page organizes the processor's key electrical characteristics, package details, ordering-code alternatives, practical application guidance, and design considerations. The information supports early architecture selection and PCB planning, while production qualification should use the complete manufacturer datasheet and the exact ordering suffix intended for assembly.

RFQ צור קשר
TAS5028PAG - 8-Ch Digital Audio PWM Processor | TI
TAS5028PAG

TAS5028PAG - 8-Ch Digital Audio PWM Processor | TI

The Texas Instruments TAS5028PAG is an 8-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It is designed for digital audio systems requiring a dedicated multi-channel pulse-width-modulation output stage and is intended to interface with audio digital signal processors. The processor operates across a stated temperature range of 0 °C to 70 °C. A digital audio PWM processor is a mixed-signal audio IC that accepts digital audio information and generates PWM control signals for a multichannel power-amplifier design. Within the broader semiconductor hierarchy, it belongs to the audio special-purpose IC category, connects digital audio processing with an external amplification stage, and ultimately supports loudspeaker or headphone drive systems. Its eight-channel architecture consolidates parallel audio-channel control into one integrated device. The principal verified feature is support for eight PWM channels in one 64-TQFP package. According to the Texas Instruments TAS5028 product information, the device automatically adjusts its control configurations and is designed to interface seamlessly with most audio digital signal processors. This integration can simplify system partitioning by moving repetitive PWM generation away from a host DSP and into a dedicated companion processor. The package and ordering information identify TAS5028PAG as the PAG package option with 64 pins and a 10 mm by 10 mm body. That relatively high pin count provides dedicated external connections for multiple channels and associated control functions. Because the verified search results do not expose the complete electrical limits, detailed pin assignments, signal timing, or performance graphs, those values should be confirmed in the manufacturer datasheet before final schematic, layout, or signal-integrity work. Typical uses include multichannel active speaker systems, soundbars, home-theater receivers, powered speaker crossovers, compact consumer audio products, and other multichannel digital-audio designs. In these applications, the TAS5028PAG can receive processed audio information from a digital signal processor and produce the PWM signals required by an external bridge-style power stage. The primary design consideration is to treat the PWM outputs as high-current, fast-transitioning signals and preserve a clean return path from the external amplifier stage. Layout should follow the manufacturer guidance for decoupling and output routing, while the system designer should verify thermal performance and EMI behavior with the selected power-stage topology. This page combines the verified manufacturer identification, package information, distributor availability, observed pricing, and documented cross-reference findings. It also adds drop-in candidate analysis, application guidance, comparison parameters, and practical design cautions that are not consolidated on a standard distributor listing.

RFQ צור קשר
TAS5028PAGR - 8-Ch Digital Audio PWM Processor | TI (Tape & Reel)
TAS5028PAGR

TAS5028PAGR - 8-Ch Digital Audio PWM Processor | TI (Tape & Reel)

The Texas Instruments TAS5028PAGR is an 8-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It is designed for digital audio systems requiring a dedicated multi-channel pulse-width-modulation output stage and is intended to interface with audio digital signal processors. The processor operates across a stated temperature range of 0 °C to 70 °C. A digital audio PWM processor is a mixed-signal audio IC that accepts digital audio information and generates PWM control signals for a multichannel power-amplifier design. Within the broader semiconductor hierarchy, it belongs to the audio special-purpose IC category, connects digital audio processing with an external amplification stage, and ultimately supports loudspeaker or headphone drive systems. Its eight-channel architecture consolidates parallel audio-channel control into one integrated device. The principal verified feature is support for eight PWM channels in one 64-TQFP package. According to the Texas Instruments TAS5028 product information, the device automatically adjusts its control configurations and is designed to interface seamlessly with most audio digital signal processors. This integration can simplify system partitioning by moving repetitive PWM generation away from a host DSP and into a dedicated companion processor. The package and ordering information identify TAS5028PAGR as the PAG package option with 64 pins and a 10 mm by 10 mm body. That relatively high pin count provides dedicated external connections for multiple channels and associated control functions. Because the verified search results do not expose the complete electrical limits, detailed pin assignments, signal timing, or performance graphs, those values should be confirmed in the manufacturer datasheet before final schematic, layout, or signal-integrity work. Typical uses include multichannel active speaker systems, soundbars, home-theater receivers, powered speaker crossovers, compact consumer audio products, and other multichannel digital-audio designs. In these applications, the TAS5028PAGR can receive processed audio information from a digital signal processor and produce the PWM signals required by an external bridge-style power stage. The primary design consideration is to treat the PWM outputs as high-current, fast-transitioning signals and preserve a clean return path from the external amplifier stage. Layout should follow the manufacturer guidance for decoupling and output routing, while the system designer should verify thermal performance and EMI behavior with the selected power-stage topology. This page combines the verified manufacturer identification, package information, distributor availability, observed pricing, and documented cross-reference findings. It also adds drop-in candidate analysis, application guidance, comparison parameters, and practical design cautions that are not consolidated on a standard distributor listing.

RFQ צור קשר
TAS5036APFC - 6-Channel Digital Audio PWM Processor | Texas Instruments
TAS5036APFC

TAS5036APFC - 6-Channel Digital Audio PWM Processor | Texas Instruments

The Texas Instruments TAS5036APFC is a six-channel digital audio PWM processor designed for multi-channel Class-D audio amplification and digital speaker driving. The device operates from a 80-pin TQFP package, identified as an 80-pin TFQFP with a 12 x 12 mm body in distributor listings. It is intended for consumer audio systems, powered speakers, audio entertainment systems and other applications requiring multiple PWM audio output channels. A digital audio PWM processor is an audio-special-purpose semiconductor that accepts digital audio information and generates the PWM drive signals required by a switching audio amplifier. Within the broader integrated-circuit hierarchy, the TAS5036APFC belongs to the audio special-purpose IC and DSP-related processing category. Its six-channel architecture consolidates several audio output channels into one device, reducing the number of separate driver components needed in a multiway amplifier design. The key product attributes are the six-channel PWM processing capability, digital audio modulation function, 80-pin TQFP package and consumer-circuit temperature grade. The device is also associated with the Texas Instruments TAS5036 family, including related suffix and order-code variants that retain an 80-pin TQFP format. Commercial packaging and suffix differences must be checked against the system PCB footprint and procurement requirements. The processor is intended to be paired with suitable PWM power stages and output-filter networks. The exact input format, audio clocking requirements, channel assignment, output configuration and protection behavior should be confirmed in the manufacturer datasheet before schematic capture or PCB layout is released. Because the processor controls multiple audio channels, clocking, grounding, EMI control and thermal performance of the associated power stages are as important as the processor itself. Typical systems include powered home-theater speakers, active multimedia speakers, multiway television or monitor speakers, compact consumer audio products and other multi-channel audio products. The TAS5036APFC can reduce system component count when several speaker channels are driven from a common digital audio source, while preserving a clear separation between digital processing and analog power amplification. For PCB implementation, reserve the complete 80-pin TQFP footprint, route high-current amplifier outputs as power-stage nets rather than processor signals, and place decoupling capacitors close to the supply pins. Verify all pin functions, exposed-pad requirements and recommended decoupling values against the manufacturer datasheet. This page consolidates the available product identification, package information and drop-in comparison data to support component selection.

RFQ צור קשר
TAS5036BPFC - 6-Channel Digital Audio PWM Processor | TI
TAS5036BPFC

TAS5036BPFC - 6-Channel Digital Audio PWM Processor | TI

The Texas Instruments TAS5036BPFC is a six-channel digital audio PWM processor packaged in an 80-pin TQFP measuring 12 x 12 mm. The device accepts serial digital audio information and generates six PWM output channels for multi-channel audio power systems. Its digital control architecture supports sample rates including 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz. A digital audio PWM processor is a specialized signal-processing IC that sits between a digital audio source and the power-conversion stage of an audio system. It can receive serial data from a DSP, S/PDIF receiver, analog-to-digital converter, digital audio processor, or another serial-bus master. The TAS5036BPFC then organizes that digital information into six independently addressed PWM channels for downstream audio amplifiers. The main feature is its six-channel PWM architecture. Three serial-data inputs allow multiple digital sources or clock arrangements to be accommodated. Supported sampling rates span conventional CD audio at 44.1 kHz through high-resolution 192 kHz operation, making the processor suitable for systems that must accept several common digital-audio formats. The 80-pin TQFP package provides the required control, data, clock, and power connections for a multi-channel implementation. The serial interface is designed for integration with established digital-audio processing chains. According to the manufacturer datasheet, the slave interface receives information from a DSP, S/PDIF receiver, ADC, or digital audio processor and operates across the listed sample-rate range. This architecture reduces the need to convert digital audio into an analog intermediate signal before the final power-amplifier stage. Typical uses include powered speakers, home-theater audio, active speakers, digital mixing consoles, surround-sound systems, soundbars, and professional listening equipment. The TAS5036BPFC is most appropriate when six PWM channels, serial digital audio control, and support for high-resolution sample rates are required within one processor. PCB implementation requires careful routing of serial data, clock, ground, and power connections in the dense 12 x 12 mm TQFP footprint. Follow the pin-description table, recommended decoupling arrangement, and output-stage requirements in the manufacturer datasheet. Confirm external amplifier topology and switching requirements before finalizing the power-stage component values. This product page combines the verified device identity, package information, digital-audio interface details, sample-rate support, replacement analysis, and practical integration guidance. It is intended to help engineers determine whether the TAS5036BPFC fits an existing six-channel audio architecture before beginning layout and firmware integration.

RFQ צור קשר
TAS5036IPFC - 6-Channel Digital Audio PWM Processor | TI
TAS5036IPFC

TAS5036IPFC - 6-Channel Digital Audio PWM Processor | TI

The Texas Instruments TAS5036IPFC is a six-channel digital audio PWM processor with a 3 V to 3.6 V supply range, I2C and I2S interfaces, and support for sample rates from 32 kHz to 192 kHz. It is packaged in an 80-pin TQFP (TFQFP) package measuring 12 mm by 12 mm, making it designed for compact multichannel digital-audio systems. A digital audio PWM processor is a specialized mixed-signal audio IC that accepts digital audio data, applies programmable processing, and generates PWM outputs for subsequent power-amplifier or speaker-driver stages. The TAS5036 belongs to the broader hierarchy of digital audio ICs, audio modulator ICs, signal-processing semiconductors, and analog-and-mixed-signal integrated circuits. Its six-channel architecture supports independent or coordinated control of multiple audio channels in a shared audio platform. Key features include six audio-processing channels, digital I2C control, I2S audio data exchange, and a single 3 V to 3.6 V supply range. The 32 kHz to 192 kHz sample-rate capability covers conventional CD-rate audio through high-resolution audio, while the I2C interface allows a host controller to configure operating parameters. The processor is identified as a commercial-temperature consumer circuit and is supplied in a surface-mount 80-terminal gull-wing TQFP package. Technically, the TAS5036 separates digital command and audio-data handling from the downstream power-amplification stage. I2S carries serialized audio samples into the processor, while I2C provides a separate control path for configuration and register access. PWM outputs represent the processed channel signals as duty-cycle-controlled waveforms. This architecture can simplify multi-channel audio designs when the system requires more than a basic digital-to-analog conversion path but does not require each channel to use a discrete audio modulator. Typical applications include powered speakers, soundbars, home-theater receivers, multi-zone audio systems, digital mixing consoles, active subwoofers, and other multichannel consumer or professional audio equipment. The six-channel organization is especially useful where several amplified channels share the same digital source and need coordinated volume, mute, routing, or processing functions. PCB design should preserve short, controlled digital paths around the I2C and I2S interfaces and provide clean supply decoupling near the device. Because an 80-pin TQFP offers more connection density than a small-outline package, careful via fanout and soldering-plan review is important. The 3 V to 3.6 V supply range also requires regulators and signal paths designed for 3.3 V logic levels. This product page combines package, interface, supply, sample-rate, pricing, cross-reference, and replacement information with practical application and layout guidance. It helps engineers identify whether the TAS5036IPFC matches the required channel count, digital audio architecture, package, and supply conditions before committing the 12 mm by 12 mm footprint to a PCB.

RFQ צור קשר
TAS5066PAG - 6-Channel 24-Bit PWM Audio Processor | TI
TAS5066PAG

TAS5066PAG - 6-Channel 24-Bit PWM Audio Processor | TI

Texas Instruments TAS5066PAG is a six-channel, 24-bit digital audio PWM processor with a 64-TQFP package measuring 10 mm by 10 mm. It operates from a 3 V to 3.6 V supply, supports sample rates from 44.1 kHz to 192 kHz, and provides I2S and I2C interfaces for digital audio data transfer and configuration. The device is designed to generate PWM-based audio output signals for multichannel audio power amplifier systems. A digital audio PWM processor is an interface and signal-generation IC positioned between a digital audio source and a class-D-style output stage. Its hierarchy is digital audio processor, audio interface IC, integrated circuit, and semiconductor. Rather than directly driving a conventional analog input, it accepts digital audio data and produces PWM control information for compatible power stages. This division of responsibilities allows a system to retain a digital audio datapath while placing the high-current, high-voltage amplification function in a dedicated power stage. The TAS5066PAG provides six processing channels, a 24-bit audio data resolution, and support for audio sample rates ranging from 44.1 kHz through 192 kHz. These parameters suit multichannel consumer, communications, and embedded audio designs in which multiple synchronized output channels are required. The 3 V to 3.6 V operating range also places the device in power domains commonly used by digital audio logic. I2S supports synchronized audio streaming, while I2C provides a separate control path for configuration and register access. The device integrates digital audio processing and PWM generation in one 64-pin TQFP package. According to the Texas Instruments TAS5066 datasheet, the supported initialization procedures cover changing data rates and switching between master and slave operating modes. Master mode provides a device-generated timing reference, whereas slave mode allows the processor to synchronize with an external audio master. These operating modes support integration into systems where the clock and sample-rate architecture must follow a central audio controller. Typical uses include multichannel powered speakers, audio docking systems, home entertainment equipment, and compact digital audio subsystems. The six-channel architecture can feed a bank of compatible output stages, while the broad sample-rate range covers CD-rate 44.1 kHz sources as well as higher-rate 48 kHz, 96 kHz, and 192 kHz streams. The Texas Instruments TAS5111DAD is a relevant output-stage companion because it is designed to work with TAS5066-family digital audio processing in PurePath applications. A primary design consideration is digital clocking. I2S data, master or slave timing, and sample-rate changes must be coordinated to prevent channel misalignment. The 64-TQFP footprint also requires careful fanout of power, ground, clock, data, and control signals. Use the manufacturer pin-description table and recommended application schematic when assigning PCB tracks and configuring the device registers. This product page consolidates the confirmed TAS5066PAG electrical limits, interface capabilities, package details, sourcing parameters, and verified drop-in cross-reference into an engineering-oriented reference. It also identifies the Texas Instruments TAS5111DAD as a companion output stage and explains the clocking, layout, and replacement considerations that matter when designing a six-channel digital audio PWM subsystem.

RFQ צור קשר
TAS5076PFC - 6-Channel Digital Audio PWM Processor | TI
TAS5076PFC

TAS5076PFC - 6-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5076PFC is a six-channel digital audio PWM processor packaged in an 80-pin TQFP measuring 12 mm by 12 mm. The device is identified as an audio modulator and belongs to the broader digital signal processing and power-management ecosystem used to convert digital audio information into PWM drive signals for multichannel Class-D audio power stages. Its defining product characteristics are six processing channels, digital audio PWM processing, and a square 80-terminal surface-mount package. A digital audio PWM processor is an application-specific integrated circuit that accepts digital audio data and generates PWM signals suitable for controlling audio power stages. Unlike a conventional analog audio amplifier, the TAS5076PFC performs digital-to-PWM conversion and associated channel control. It sits between an audio source or digital interface and one or more external Class-D output stages, making it useful in home-theater systems, powered speakers, automotive audio, and professional audio equipment. The TAS5076PFC provides six-channel PWM processing in a single device, which can simplify system integration compared with a design using multiple discrete or single-channel digital audio converters. Its surface-mount TQFP construction supports automated PCB assembly and high-density equipment designs. The 12 mm by 12 mm body is larger than a typical QFP, but it provides 80 terminals and sufficient routing flexibility for multichannel digital and power-control connections. As a special-purpose audio processor, the TAS5076PFC is intended for digital signal processing rather than general-purpose computation. Its internal architecture and register interface determine how digital audio data is accepted, distributed across six channels, and converted into PWM outputs. Exact interface timing, supported audio data formats, clock requirements, output characteristics, and control-register functions should be confirmed in the manufacturer datasheet before a circuit is released. Typical applications include powered home-theater speakers, multichannel amplifier modules, automotive head-unit audio systems, digital active speakers, and professional monitoring equipment. In each case, the processor can provide a coordinated six-channel PWM generation function while leaving the final high-current audio output stage to appropriately rated external hardware. Actual channel implementation depends on the supported digital-audio format and the system amplifier architecture. The primary design consideration is ensuring that the digital source format, clocking, ground distribution, and PWM routing satisfy the device requirements. Place decoupling close to its supply terminals, route sensitive digital signals over a continuous reference plane, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Because the processor does not directly replace a high-power output transistor array, external power stages and their thermal design remain part of the complete amplifier solution. This product record combines the verified identity of the TAS5076PFC with packaging information, sourcing guidance, and a structured review of what engineers must confirm in the datasheet. It also distinguishes confirmed replacement information from unavailable pin-level, timing, and compliance details, helping designers assess fit before beginning layout or firmware development.

RFQ צור קשר
TAS5076PFCR - 6-Channel Digital Audio PWM Processor | TI
TAS5076PFCR

TAS5076PFCR - 6-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5076PFCR is a six-channel digital audio PWM processor designed for multichannel audio systems, with a 3.0 V to 3.6 V supply range and support for sampling rates from 32 kHz through 192 kHz. The device is packaged in an 80-pin TQFP measuring 12 mm by 12 mm. A digital audio PWM processor belongs to the class of audio DSPs and digital-to-analog conversion devices used to translate digital audio information into pulse-width-modulated drive signals. Within the signal chain, it operates between a digital audio interface and a power-amplifier stage. Its six-channel architecture allows one processor to manage multiple audio paths while reducing the number of discrete control and modulation functions required in a multichannel amplifier design. Key characteristics include six independent audio-modulator channels, a 3.0 V to 3.6 V operating-supply range, 32 kHz to 192 kHz sample-rate support, and an 80-pin TQFP package. The 12 mm square package provides a defined PCB land pattern with exposed component sides suitable for automated assembly. These characteristics make the TAS5076PFCR relevant to home-theater receivers, powered speakers, cinema systems, and other multichannel audio equipment. The device is associated with Texas Instruments' PurePath Digital product family. That positioning identifies it as an audio-focused digital signal-processing device rather than a conventional analog amplifier. Its PWM outputs are intended to provide modulation information for an external amplification stage, so system-level performance also depends on the chosen power stages, output filtering, clocking, and power-supply design. Typical implementations require the correct digital-audio interface, synchronization signals, configuration data, and supporting power rails. The manufacturer datasheet is the controlling reference for pin assignments, clock requirements, control registers, electrical limits, and recommended application circuits. Designers should preserve the package footprint and timing requirements when creating a new layout or adapting an existing PurePath Digital audio platform. The main design consideration is that the processor is only one element of the audible output path. Its PWM signals must be connected to suitable amplifier circuitry, and the system must meet the interface and timing constraints stated by Texas Instruments. Blindly substituting a processor with a different channel count, signal format, clock architecture, or package would not preserve the original design intent. This product page consolidates the verified device description, package details, operating limits, sourcing guidance, and confirmed replacement information. It also identifies where pin-level, register-level, and application-specific decisions require consultation of the manufacturer datasheet rather than assumption.

RFQ צור קשר
TAS5086DBT - 6-Channel Digital Audio PWM Processor | Texas Instruments
TAS5086DBT

TAS5086DBT - 6-Channel Digital Audio PWM Processor | Texas Instruments

The Texas Instruments TAS5086DBT is a six-channel digital pulse-width modulation audio processor with four serial audio inputs representing eight input channels, support for 16-, 20-, or 24-bit data, and operation from 3 V to 3.6 V. The device is supplied in a 38-pin TSSOP (DBT) package and is designed to drive six speaker channels in single-ended or bridge-tied configurations. A digital audio PWM processor is an integrated circuit that accepts digital audio samples and converts them into high-speed PWM outputs suitable for controlling switching power stages. Within the broader hierarchy, the TAS5086DBT is a digital signal controller, a specialized DSP, and a system-integration IC for multichannel Class-D audio amplification. Its integrated control functions reduce the amount of external digital processing required in home-theater, multimedia, and powered-speaker systems. Key capabilities include automatic detection of master-clock and data-sample rates, four serial audio inputs carrying eight channels, and support for 32-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz sampling rates. Input word lengths of 16, 20, or 24 bits allow compatibility with common audio processors and MPEG decoders. Six independently controlled PWM outputs support either six single-ended loads or three bridge-tied loads when fewer amplifier channels are required. The TAS5086DBT architecture integrates digital audio input handling, PWM modulation, speaker-output control, and communication with a host processor. This integration provides a practical bridge between a digital audio decoder and external power stages. Exact clock requirements, PWM output timing, electrical limits, and thermal characteristics must be confirmed in the manufacturer datasheet before finalizing a high-power design. Typical uses include 5.1-channel home-cinema amplification, active multimedia speakers, digital soundbars, powered subwoofers, and compact consumer audio systems. Its multiple serial inputs and six-channel output capability suit systems in which one device receives several decoded audio streams and coordinates multiple speaker drive channels. The IC is intended to work with appropriately designed external switching power stages and speaker drivers. A key design consideration is that digital audio correctness depends on proper clocking, data alignment, and channel mapping. The PCB should provide a short, controlled return path for switching-node energy, while the analog and digital grounds should follow the manufacturer’s recommended layout and decoupling arrangements. Verify the external MOSFET, gate-driver, filter, and thermal solution against the datasheet before production. This product page consolidates verified manufacturer facts, distributor sourcing information, ordering-code differences, comparison data, and practical design cautions. It is intended to accelerate component selection while explicitly identifying electrical details that remain unavailable in the supplied source snapshot.

RFQ צור קשר
TAS5086DBTR - 6-Channel Digital Audio PWM Processor | Texas Instruments (Tape & Reel)
TAS5086DBTR

TAS5086DBTR - 6-Channel Digital Audio PWM Processor | Texas Instruments (Tape & Reel)

The Texas Instruments TAS5086DBTR is a six-channel digital pulse-width modulation audio processor with four serial audio inputs representing eight input channels, support for 16-, 20-, or 24-bit data, and operation from 3 V to 3.6 V. The device is supplied in a 38-pin TSSOP (DBT) package and is designed to drive six speaker channels in single-ended or bridge-tied configurations. A digital audio PWM processor is an integrated circuit that accepts digital audio samples and converts them into high-speed PWM outputs suitable for controlling switching power stages. Within the broader hierarchy, the TAS5086DBTR is a digital signal controller, a specialized DSP, and a system-integration IC for multichannel Class-D audio amplification. Its integrated control functions reduce the amount of external digital processing required in home-theater, multimedia, and powered-speaker systems. Key capabilities include automatic detection of master-clock and data-sample rates, four serial audio inputs carrying eight channels, and support for 32-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz sampling rates. Input word lengths of 16, 20, or 24 bits allow compatibility with common audio processors and MPEG decoders. Six independently controlled PWM outputs support either six single-ended loads or three bridge-tied loads when fewer amplifier channels are required. The TAS5086DBTR architecture integrates digital audio input handling, PWM modulation, speaker-output control, and communication with a host processor. This integration provides a practical bridge between a digital audio decoder and external power stages. Exact clock requirements, PWM output timing, electrical limits, and thermal characteristics must be confirmed in the manufacturer datasheet before finalizing a high-power design. Typical uses include 5.1-channel home-cinema amplification, active multimedia speakers, digital soundbars, powered subwoofers, and compact consumer audio systems. Its multiple serial inputs and six-channel output capability suit systems in which one device receives several decoded audio streams and coordinates multiple speaker drive channels. The IC is intended to work with appropriately designed external switching power stages and speaker drivers. A key design consideration is that digital audio correctness depends on proper clocking, data alignment, and channel mapping. The PCB should provide a short, controlled return path for switching-node energy, while the analog and digital grounds should follow the manufacturer’s recommended layout and decoupling arrangements. Verify the external MOSFET, gate-driver, filter, and thermal solution against the datasheet before production. This product page consolidates verified manufacturer facts, distributor sourcing information, ordering-code differences, comparison data, and practical design cautions. It is intended to accelerate component selection while explicitly identifying electrical details that remain unavailable in the supplied source snapshot.

RFQ צור קשר
TAS5100ADAP - 30W Mono Class-D Audio Power Stage | TI
TAS5100ADAP

TAS5100ADAP - 30W Mono Class-D Audio Power Stage | TI

The Texas Instruments TAS5100ADAP is a mono Class-D true-digital audio amplifier power stage rated for 30 W output and packaged in a 32-pin HTSSOP PowerPAD. It is designed to drive an external loudspeaker efficiently while accepting digital audio signals from a compatible PWM audio processor. The device provides 93 dB dynamic range in a TDAA system and specifies THD+N of 0.08% at 1 kHz when delivering 30 W RMS into a 6 ohm load. A Class-D audio power stage is an amplifier topology that switches current through the output devices rather than dissipating a continuous linear signal. This approach supports high power efficiency, reportedly exceeding 90% into an 8 ohm load, while reducing heat and power-conversion loss compared with a conventional linear output stage. Within the signal-chain hierarchy, the TAS5100ADAP is an audio amplifier IC and digital power-output stage intended to follow a compatible digital audio PWM processor. Key characteristics include 30 W RMS output capability, 93 dB system dynamic range, 0.08% THD+N at 30 W into 6 ohms, and power efficiency above 90% into an 8 ohm load. Its digital input arrangement makes it suitable for systems that process audio in the digital domain before converting it into a high-power speaker drive stage. The exposed thermal pad supports removal of heat from the package when the PCB and thermal design are appropriate. The TAS5100A is based on Texas Instruments True Digital Audio Amplifier, or TDAA, technology. In this architecture, digital audio information reaches the power-output stage, allowing the amplifier to perform the final high-current conversion efficiently. The device is intended for use with a compatible TAS50xx-family digital audio processor rather than as a conventional analog-input Class-D amplifier. Careful filtering, supply selection, and thermal management remain necessary to reproduce low distortion and maintain reliability at substantial output power. Typical uses include powered speakers, sound bars, home-theater equipment, compact stereo systems, multimedia speakers, and other consumer audio products requiring efficient mono amplification. The 30 W capability is particularly relevant where a woofer, subwoofer, or full-range driver operates near the upper portion of the device's power range. The external speaker interface should be designed around the supported output topology and power capability described by the manufacturer. PCB layout is a central design consideration for this power stage. Keep the exposed pad connected to a suitable thermal copper area, place power-supply and output-path components close to their functional pins, and follow the manufacturer layout guidance for high-current switching paths. Wide copper and short connections help reduce resistance and parasitic inductance, while effective thermal design prevents junction temperature from rising beyond the device's operating limits. This page combines manufacturer-document characteristics, sourcing guidance, application-specific implementation notes, and a structured comparison of identified same-family drop-in candidates. These engineering details help designers distinguish true pin-compatible replacements from higher-power family members that require closer review of electrical limits and thermal behavior.

RFQ צור קשר
TAS5100DAP - 30W Mono Class-D Audio | Texas Instruments
TAS5100DAP

TAS5100DAP - 30W Mono Class-D Audio | Texas Instruments

The Texas Instruments TAS5100DAP is a mono Class-D digital audio power output stage rated for 30 W RMS power, with a 93 dB dynamic range in the TDAA system and THD+N of 0.08% at 1 kHz into a 6-ohm load. The device is packaged in a low-profile 32-pin HTSSOP with an exposed PowerPAD thermal pad. A Class-D power stage is a switching audio amplifier topology that controls current through the speaker output according to a pulse-width-modulated signal. Compared with a linear audio amplifier, this approach can achieve power efficiency above 90% into an 8-ohm load, reducing the amount of heat that must be removed from the audio output stage. The TAS5100DAP is a power-output-stage device intended for use with a preceding audio codec, DAC, DSP, or digital audio interface. Key performance features include 30 W RMS output capability, 0.08% THD+N at 1 kHz into 6 ohms, 93 dB dynamic range in the TDAA system, and greater than 90% power efficiency into an 8-ohm load. Its digital input architecture supports direct reception of digital audio signals, avoiding an analog input stage and associated conversion circuitry in systems where a digital audio source is already available. The 32-pin HTSSOP package provides a compact surface-mount solution with a PowerPAD for heat dissipation. The commercial temperature range extends from 0°C to 70°C. Because a 30 W output stage can dissipate substantial heat at low supply voltages or into low-impedance speakers, PCB copper area, thermal via layout, and the selected speaker load must be evaluated during system design. Typical applications include home-theater and multimedia speaker amplification, powered speaker designs, digital audio receiver output stages, compact consumer audio products, and industrial audio systems using a digital signal-processing front end. The device is particularly suitable when low idle dissipation, high conversion efficiency, and direct digital audio control are priorities. The main design tradeoff is power dissipation at low supply headroom. Output power is constrained by both supply voltage, speaker impedance, and thermal conditions; a nominal 30 W capability does not guarantee 30 W continuously at every input voltage or ambient temperature. Use the manufacturer powerPAD layout guidance and thermal calculations to establish dependable operating limits. This product page consolidates the principal electrical characteristics, verified package information, application guidance, thermal considerations, and comparison criteria for the TAS5100DAP. It also distinguishes verified drop-in replacements from merely similar devices so engineers can make a footprint-compatible sourcing decision without changing the PCB.

RFQ צור קשר
TAS5101DAP - 2x15W True Digital Stereo Class D Power Stage | Texas Instruments
TAS5101DAP

TAS5101DAP - 2x15W True Digital Stereo Class D Power Stage | Texas Instruments

The Texas Instruments TAS5101DAP is a true digital stereo audio power stage delivering 2 x 15 W RMS into 4 ohm loads, with greater than 95 dB dynamic range, 0.1 % THD+N, and more than 90 % efficiency into an 8 ohm load, all in a 32-pin HTSSOP (DAP) package with exposed thermal pad. It is a Class D (D-class) digital audio power amplifier that accepts a 3.3 V stereo PWM input and produces single-ended outputs, and it is designed to work with a digital audio host processor in the TAS50xx family. A digital audio power amplifier converts audio data into a full-power digital PWM stream that is then reproduced by a switching output stage. Because the signal stays in the digital domain until the final switching transistors, distortion products do not accumulate through an analog chain, and amplifier performance becomes a function of the digital word stream rather than of analog linearity. Within the amplifier IC category, the TAS5101DAP sits between a digital audio host (for example TAS5000PFB) and the loudspeaker, forming the output-power stage of a true digital amplification system. Key features include TI equibit technology for channel-to-channel matching, greater than 90 % power efficiency that shrinks the required power supply and heat sink, single-ended output configuration for simplified speaker connection, and a low-profile surface-mount HTSSOP-32 footprint with an exposed pad for thermal dissipation. Dynamic range above 95 dB in a TDAA system means the power stage contributes very little of its own noise to the overall audio path. Technically, the device is a true digital amplifier rather than a self-contained analog-input Class D codec. It requires an external PWM-capable digital audio processor, and the host must supply the 3.3 V stereo PWM signal. Because there is no analog input stage, there is no analog volume control inside the part; gain and volume are handled upstream in the digital domain, which is what allows the power stage to remain a small, efficient, and reproducible module. Typical applications include powered loudspeakers, home theater and active speaker systems, digital mixer consoles, multi-room networked audio amplifiers, soundbar and flat-panel television audio, and professional monitor amplifiers where the 2 x 15 W per channel capability and high efficiency keep thermal mass and cost low. The key design consideration is heat: even at 90 % efficiency, a 30 W stereo output dissipates several watts in the output stage, so the exposed pad must be soldered to a generously sized ground copper pour, and the host must be able to deliver a clean 3.3 V PWM stream with matched channel timing. Place the decoupling capacitors directly across the supply and ground pins on the pad side of the package to keep switching current loops tight. This page combines manufacturer specification data, a parameter-by-parameter drop-in comparison, and practical layout and thermal guidance that goes beyond the basic orderable information normally published for this amplifier.

RFQ צור קשר
TAS5101DAPR - Stereo Class D Audio Amplifier | Texas Instruments
TAS5101DAPR

TAS5101DAPR - Stereo Class D Audio Amplifier | Texas Instruments

The Texas Instruments TAS5101DAPR is a two-channel Class D stereo audio amplifier with an integrated PWM power output stage, delivering up to 15 W per channel into a 4 ohm load. The device accepts digital audio inputs and is packaged in a 32-lead heat-pad HTSSOP package for surface-mount audio power designs. Its digital input architecture, stereo output configuration, short-circuit protection, thermal protection, and shutdown function place it between digital audio sources and bridge-tied speaker outputs. A Class D audio amplifier is a switching power amplifier that converts a digital or analog input signal into a pulse-width-modulated output. This approach offers much higher energy efficiency than a conventional linear audio amplifier because the output transistors operate primarily in their switching states rather than dissipating the full voltage difference continuously. The TAS5101DAPR therefore belongs to the digital audio power-amplifier category and the broader amplifier IC hierarchy used in portable speakers, home audio equipment, and compact consumer systems. The principal advantages include a 15 W x 2 output capability at 4 ohm, a two-channel stereo configuration, and digital input support. These characteristics make the amplifier suitable for systems that need two amplified speaker outputs without using separate full-power amplifier channels. Integrated short-circuit and thermal protection improve robustness during overload or thermal stress, while shutdown provides a controlled path for disabling the amplifier when the system is inactive. The HTSSOP package provides a compact implementation but requires deliberate power-layout and thermal-management practices. Its exposed power pad must be connected to the supply and ground planes according to the manufacturer pin description and layout guidance. Because Class D output stages carry switching current and high common-mode voltage, component placement, output-loop layout, speaker return routing, and ground-plane design can materially affect EMI, click-and-pop behavior, and thermal performance. Typical uses include powered speakers, compact stereo audio systems, soundbar amplifier sections, multimedia speaker enclosures, portable docking systems, and auxiliary audio modules driven by a digital audio source. For a 4 ohm speaker network, the published 15 W x 2 rating provides a clear sizing point, although continuous power also depends on the supply capability, thermal design, signal format, and output-filter implementation. The primary design consideration is that the amplifier's supply must support the switched output current while maintaining low ripple and adequate headroom. Place the input, output, and power-ground components close to their associated pins, keep high-current output loops compact, and verify copper and via capacity before loading both channels to their maximum rated output. This product record combines package, lifecycle, output-power, protection, and application information with practical implementation guidance and drop-in candidate analysis. It helps engineers separate electrical compatibility from simple package similarity before committing to a replacement or redesign.

RFQ צור קשר
TAS5101IDAP - 15W Stereo Class-D Amplifier | Texas Instruments
TAS5101IDAP

TAS5101IDAP - 15W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5101IDAP is a 15 W-per-channel stereo Class-D audio power amplifier with a PWM stereo power output stage, housed in a 32-pin HTSSOP package. It operates from a 3 V to 3.6 V supply and is specified for an industrial ambient-temperature range of -40°C to +85°C. The device is intended for compact audio systems that require efficient Class-D output stages without the efficiency penalty of a conventional linear amplifier. A Class-D audio amplifier is a switching power amplifier whose output transistors operate at high frequency. Compared with a linear audio amplifier, the switching architecture can deliver greater power efficiency, although filtering and electromagnetic compatibility remain important design considerations. The TAS5101IDAP belongs to the broader hierarchy of audio amplifier IC, power amplifier IC, and power management semiconductor, with its PWM output stage intended to drive stereo speaker networks. Key performance characteristics include greater-than-95-dB dynamic range in a typical digital audio amplifier system, 0.1% THD+N at 1 kHz while delivering 15 W RMS into 4 Ω, and greater-than-90% power efficiency into an 8 Ω load. These specifications make the device suitable for applications where output power, conversion efficiency, and integrated stereo amplification must coexist within a compact surface-mount design. The TAS5101 uses a true digital stereo audio architecture with a PWM power output stage. Its single-ended output arrangement and 3 V to 3.6 V supply operation suit low-voltage portable and connected-audio systems. The exposed-pad HTSSOP construction is intended for board-level heat dissipation, but correct land-pattern implementation and thermal management remain essential when operating near the 15 W per-channel performance point. Typical uses include compact stereo speakers, portable audio equipment, smart displays, sound bars, multimedia systems, and other products needing two amplified audio channels. The 32-pin HTSSOP package supports surface-mount assembly, while the 3 V to 3.6 V supply range is particularly suitable for systems powered from regulated low-voltage rails. Designers should follow the manufacturer datasheet for pin assignments, output filtering, supply decoupling, exposed-pad layout, and thermal calculations. Particularly in portable systems, verify speaker impedance, peak channel power, and simultaneous-load dissipation before selecting inductors, capacitors, copper area, and output filters. This product page organizes the documented electrical characteristics, package details, application guidance, comparison information, and practical design considerations into a design-focused reference for engineers evaluating the TAS5101IDAP.

RFQ צור קשר
TAS5102DAD - 20W Stereo Class-D Power Stage | Texas Instruments
TAS5102DAD

TAS5102DAD - 20W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5102DAD is a 20-W stereo, PWM-input Class-D audio amplifier power stage with a 2-channel bridge-tied-load output architecture and an 8-V to 23-V supply range. The device is offered in a thermally enhanced 32-pin HTSSOP DAD package with an exposed pad, giving the output stages a compact surface-mount implementation for powered speakers and other audio systems. A Class-D audio amplifier is a switching power stage that converts a PWM input into a high-frequency, high-current bridge-tied-load waveform. This approach belongs to the amplifier IC and power-management semiconductor hierarchy and can provide high output efficiency compared with a conventional linear output stage. The TAS5102 family is intended for audio systems where a digital audio source supplies PWM signals and the power stage must drive an 8-ohm speaker load. The manufacturer identifies 20-W and 15-W stereo output capability and specifically states 18 W per channel into an 8-ohm BTL load at 10% THD+N with a heatsink. Other highlighted characteristics include greater than 100-dB A-weighted SNR and less than 0.1% THD+N at 1 W. These values define useful operating points but should not be interpreted as guarantees across every supply voltage, temperature, filter, and thermal condition. The TAS5102DAD is an integrated power stage rather than a complete host audio processor. Its PWM inputs allow connection to a digital audio DAC or audio processor, while external output inductors and LC filtering convert the bridge-tied-load waveform into a filtered speaker drive. Differential outputs also eliminate the need for output coupling capacitors when the recommended speaker filter is implemented correctly. Typical applications include stereo powered speakers, active bookshelf speakers, compact multimedia speakers, soundbar power stages, and other consumer audio products accepting PWM input. The 8-V to 23-V supply range suits systems using a bus above the 5-V rail level, while the exposed thermal pad allows heat to spread through the PCB and an optional heatsink to extend continuous-output capability. For a new design, follow the manufacturer datasheet for the exact PWM input logic, differential output filtering, component values, exposed-pad land pattern, thermal layout, and bypass-capacitor requirements. Pay particular attention to output-filter selection because speaker current, filter losses, and switching-edge behavior can materially affect both output power and thermal rise. This page consolidates the verified manufacturer and distributor information for TAS5102DAD, maps the important output and thermal constraints, identifies qualification limits, and provides application-focused engineering guidance. It also documents where complete pin-level and electrical details must be confirmed in the TI datasheet before schematic release or PCB implementation.

RFQ צור קשר
TAS5103DAP - 15W Stereo PWM Class-D Amplifier | Texas Instruments
TAS5103DAP

TAS5103DAP - 15W Stereo PWM Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5103DAP is a 15 W stereo, PWM-input, open-loop Class-D audio power amplifier with an 8 V to 23 V supply range, housed in a 32-pin HTSSOP DAP package. It drives an 8 ohm bridge-tied load and provides two integrated stereo output channels for audio systems requiring a digital power stage without a conventional analog input stage. A Class-D audio amplifier is a switching power amplifier that converts PWM signals into high-frequency bridge-tied output currents. It belongs to the amplifier IC hierarchy, where Class-D topology -> audio power amplifier -> audio signal-processing IC -> semiconductor. Compared with an analog linear output stage, a properly filtered Class-D design can provide high output power with lower power dissipation, although output filtering and electromagnetic compatibility remain important design considerations. The TAS5103 is designed to deliver up to 15 W per channel into an 8 ohm bridge-tied load from an 8 V to 23 V supply. Its integrated digital power stages support stereo audio amplification, while its PWM input architecture allows a digital audio processor to control the output waveform directly. The device also incorporates an advanced protection system and is intended for low-cost, high-fidelity audio systems built around compatible digital signal processing and codec chips. The architecture separates PWM signal generation from output-current amplification. This makes the TAS5103DAP appropriate for systems in which a host processor, audio codec, or dedicated modulator produces differential PWM signals. The class-D output stage then develops the full bridge-tied speaker voltage. Compared with a conventional analog-input amplifier, this arrangement can reduce the number of signal-chain stages and supports deterministic digital control of the speaker drive. Typical uses include powered speakers, compact stereo systems, sound bars, automotive audio modules, and other low-voltage audio products. Designers should select the modulation method, differential routing, output filtering, and speaker network together with the amplifier because PWM timing, dead time, switching noise, and output inductance directly affect fidelity and electromagnetic emissions. A critical layout requirement is a short, symmetric output path between the device, LC filter, and speaker connector. Keep switching-current loops compact, use a continuous ground plane, and follow the manufacturer datasheet for component selection and thermal pad layout. Adequate copper around the exposed pad supports heat transfer from the power stage into the PCB. This page combines the official product parameters with application guidance, package information, sourcing questions, and drop-in-replacement analysis. It also identifies the boundaries of the available replacement evidence so engineers can avoid assuming that a similar Class-D amplifier is electrically and physically interchangeable.

RFQ צור קשר
TAS5110ADAD - 50W Stereo Class-D Stage | Texas Instruments
TAS5110ADAD

TAS5110ADAD - 50W Stereo Class-D Stage | Texas Instruments

The Texas Instruments TAS5110ADAD is a 50 W per-channel stereo Class-D digital audio power stage with a 3 V to 3.6 V supply range, designed for high-efficiency loudspeaker drive in a 32-pin HTSSOP package. It combines two audio output channels, Equibit modulation technology, and PurePath Digital technology in a surface-mount power-stage IC intended to operate with a compatible digital audio PWM processor. A true-digital audio amplifier power stage forms the output section of a digital audio system. Unlike a conventional analog Class-D amplifier, it receives digital audio commands and internally generates the switching signals needed to drive loudspeakers. Within the broader hierarchy, the TAS5110ADAD is a Class-D audio amplifier IC, a digital power amplifier, and a semiconductor power-management device. This architecture places signal processing and power-stage functions close to the speaker load while supporting efficient amplification. The headline capability is 50 W × 2 continuous output into 6-ohm speakers. Its two-channel stereo configuration supports left and right amplification from one device, reducing the number of output ICs required in a multiway audio system. A 3 V to 3.6 V operating supply suits portable and space-constrained equipment, while the 32-pin HTSSOP package supports compact surface-mount layouts. The listed operating-temperature range is 0°C to 70°C. Equibit and PurePath Digital technologies are central to the device’s operating concept. Equibit provides digital speaker-power management, while PurePath Digital provides the digital audio interface and modulation architecture. The TAS5110A is intended to work with a TAS50xx digital audio PWM processor, allowing digital commands and audio data to reach the output stage without a conventional analog input signal at the amplifier. Typical uses include stereo wireless speakers, portable audio equipment, compact multimedia speakers, digital active loudspeakers, soundbars, and compact home-audio systems. Its 50 W per-channel capability is appropriate for room-filling consumer speakers when the system’s supply, thermal design, output filtering, and speaker impedance satisfy the manufacturer’s operating requirements. Two channels in one package also simplify balanced stereo layouts. Thermal management is central because the exposed-pad HTSSOP must dissipate power efficiently into the printed circuit board. Place the device on a multilayer board with a continuous ground plane, use the manufacturer’s reference layout, and provide copper around the thermal pad. Input, digital-control, ground, and speaker connections should follow the recommended layout to control switching noise and maintain signal integrity. This product page combines the core TAS5110ADAD specifications, package details, verified drop-in replacement analysis, application guidance, and design-focused comparisons. It is intended to help engineers evaluate digital speaker-drive architecture, confirm PCB compatibility, and distinguish the A-revision ordering from related TAS5110 family members before releasing a production design.

RFQ צור קשר