מוצרים (44,000+)

TAS5110DAD - 50W Stereo Class-D Power Stage | TI
TAS5110DAD

TAS5110DAD - 50W Stereo Class-D Power Stage | TI

The Texas Instruments TAS5110DAD is a 2-channel stereo Class-D true digital audio amplifier power stage designed to deliver 50 W RMS per channel into a 4-ohm load at 10% THD, packaged in a 32-pin HTSSOP. It operates as the output stage in a true digital audio architecture and accepts a 3.3 V PWM audio stream from a compatible digital audio modulator. The device supports 40 W RMS per channel at 0.1% THD, producing 93 dB dynamic range in a TDAA system. A true digital audio amplifier, or TDAA, separates digital signal processing from analog power amplification. In this architecture, a dedicated PCM-to-PWM processor converts digital audio into a differential PWM signal, while the TAS5110DAD performs the high-current power-stage function. This separation can improve efficiency, reduce analog signal-path complexity, and support digital volume and channel control when paired with a suitable modulator. The TAS5110DAD's principal output capability is 50 W RMS per channel at 10% THD. At the more stringent 0.1% THD condition, each channel can deliver 40 W RMS. Typical total harmonic distortion plus noise is below 0.09% with a 1 kHz input signal, making the stage appropriate for high-power stereo audio systems where low clipping distortion is important. Its efficiency can exceed 90%, reducing heat generation and power-supply demand compared with inefficient linear output stages. The device incorporates TI equibitt technology and operates within a true digital audio system rather than accepting conventional analog audio directly. A compatible TAS50xx digital audio PWM processor performs the required signal conversion. This architecture is useful when a design benefits from digital control, compact system implementation, or elimination of a conventional analog input and voltage-gain amplifier stage. The external power architecture and load capability still require careful layout and thermal planning. Typical applications include powered stereo speakers, home-theater and multimedia amplifiers, compact consumer audio systems, digital active speakers, and industrial audio equipment operating from suitably rated power supplies. The 50 W per-channel output target is suitable for demanding speaker loads, while the high-efficiency Class-D output stage helps reduce board-space requirements compared with a linear amplifier of similar output power. The main design consideration is the power path. Use a low-impedance power supply and ground layout, keep high-current switching loops compact, and provide robust filtering between the switching output and sensitive audio circuitry. Thermal performance depends on the exposed package thermal pad, copper area, airflow, enclosure temperature, and sustained output level, so thermal performance must be verified in the finished enclosure rather than estimated from the package name alone. This product page organizes the TAS5110DAD specifications, verified source links, application guidance, design notes, and replacement considerations into one engineering reference. The technical emphasis is on output power, distortion, efficiency, digital-system integration, thermal implementation, and the practical differences between documented device variants.

RFQ צור קשר
TAS5110DADR - 2-Channel 50W Class D Audio Amplifier | TI
TAS5110DADR

TAS5110DADR - 2-Channel 50W Class D Audio Amplifier | TI

Texas Instruments TAS5110DADR is a two-channel Class D audio power stage designed for high-power stereo amplification, with each channel rated to deliver 50 W. The device accepts a digital PWM audio stream and is supplied in a 32-pin heat-enhanced TSSOP package. Its Class D architecture provides efficient power conversion for consumer audio, home-theater, powered-speaker, and compact multimedia equipment. A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to reproduce an audio waveform at the output. In a true digital audio amplifier architecture, the TAS5110 operates with a separate digital audio processor such as the TAS50xx family. The processor accepts PCM audio and produces a 3.3 V PWM stream, while the TAS5110 converts that stream into high-current bridge-tied outputs capable of driving speaker loads. The headline characteristics are two 50 W output channels, Class D operation, a 3.3 V PWM input interface, and a 32-pin HTSSOP package. The HTSSOP package is intended for surface-mount assembly and includes a thermal pad for heat transfer into the printed-circuit board. Its exposed-pad construction helps dissipate the energy associated with switching and output-stage losses. Operationally, the TAS5110 is a digital power-output stage rather than a conventional analog input amplifier. It requires suitable digital-audio timing, clocking, and control signals from the companion processor. Differential PWM inputs allow the device to reconstruct a full-scale analog output at the speaker terminals without requiring a separate analog output filter. This architecture is intended to reduce analog distortion stages while retaining efficient class-D power conversion. Typical uses include powered stereo speakers, active subwoofers, audiovisual receivers, compact hi-fi systems, soundbars, and multimedia speaker enclosures. The 50 W per-channel capability is particularly useful where the speaker load, enclosure volume, thermal design, and supply capability permit sustained high-power operation. Lower-power systems can also use the device, but amplifier efficiency and heat dissipation still depend on the selected supply and output-filter implementation. PCB design should prioritize short high-current output paths, a low-impedance ground plane, adequate input bypassing, and continuous copper beneath the exposed thermal pad. The output filter and speaker interface must be selected to suit the switching frequency and load characteristics. Thermal analysis should include worst-case supply voltage, channel load, and enclosure conditions rather than relying only on nominal music-power operation. This page consolidates the device identity, package information, verified distributor listing data, application guidance, and qualification limits into a design-oriented reference. It also distinguishes exact package substitutions from broader functional alternatives so engineers can make a PCB-level decision without confusing electrical equivalence with true drop-in compatibility.

RFQ צור קשר
TAS5110DAP - 50W Stereo Class-D Power Stage | Texas Instruments
TAS5110DAP

TAS5110DAP - 50W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5110DAP is a stereo Class-D digital audio power stage rated for 50 W RMS per channel at 10% THD and 40 W RMS per channel at 0.1% THD. It uses Texas Instruments Equibitt true-digital audio amplification technology, provides 93 dB dynamic range in a TDAA system, and operates from a 32-pin HTSSOP package with an exposed thermal pad. The device is designed to work with a TAS50xx digital audio PWM processor rather than as a conventional analog-input Class-D amplifier. A true digital audio amplifier, or TDAA, is a power-management and signal-processing IC that converts digital audio data into a high-power PWM output stage. Within the broader hierarchy, it combines a digital audio processor with a switching power stage to provide efficient low-distortion speaker drive. The TAS5110DAP handles the power-amplifier role, while the associated TAS50xx processor manages digital audio decoding, modulation, channel control, and system-level audio functions. Key features include 50 W RMS output at 10% THD, 40 W RMS output at 0.1% THD, typical THD+N below 0.09% with a 1 kHz input signal, and 93 dB dynamic range in a TDAA system. Its power efficiency can exceed 90%, reducing the heat dissipation and enclosure size normally associated with high-output audio amplification. The integrated exposed-pad package supports removal of power-stage heat through the PCB copper area. Technically, the TAS5110DAP operates as a dual-channel PWM power output stage. Each channel can deliver 50 W RMS under the stated 10% THD condition, while the lower-distortion 0.1% THD condition supports 40 W RMS per channel. The published 93 dB dynamic-range figure applies to a complete TDAA system rather than an isolated analog-input amplifier. This distinction is important when comparing it with conventional analog Class-D or Class-AB audio amplifiers. Typical applications include home-theater and active-speaker systems, compact stereo amplifiers, powered subwoofers, digital audio racks, and consumer television or set-top equipment. The TAS5110DAP is particularly appropriate where a digital audio signal is already available, system efficiency matters, and analog-to-digital conversion should be avoided. It can also be paired with an external digital PWM processor to create a complete true-digital amplification channel. Designers should use the manufacturer datasheet for the exact supply limits, pin assignments, exposed-pad land pattern, thermal data, and recommended output-filter values. PCB layout must provide a low-impedance power and ground path, adequate decoupling, controlled switching-node routing, and a substantial thermal copper area beneath the exposed pad. Thermal performance depends strongly on the board copper, thermal vias, enclosure, and sustained output level. This product record combines the TAS5110DAP power-output specifications, package information, application context, engineering guidance, and structured comparison fields. It also distinguishes the device from analog-input audio amplifiers by explaining the required digital audio processor, PWM architecture, efficiency considerations, and PCB constraints that materially affect a practical high-power design.

RFQ צור קשר
TAS5111ADAD - 70W Mono Class-D Amplifier | Texas Instruments
TAS5111ADAD

TAS5111ADAD - 70W Mono Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5111ADAD is a mono Class-D digital amplifier power stage rated for up to 70 W output, with a 32-pin HTSSOP package and exposed thermal pad. It is designed to drive a 4-ohm speaker with low distortion and high power efficiency. The device accepts a digital amplifier input and integrates the power-stage functionality required in compact audio systems. A Class-D audio amplifier is a switching amplifier that uses pulse-width modulation to control current through the speaker. Compared with a linear Class-AB output stage, a Class-D power stage can convert more of its input power into acoustic output, reducing heat in compact consumer, automotive, and industrial audio products. The TAS5111A belongs to the digital amplifier power-stage hierarchy within audio amplifier ICs and power-management semiconductors. Key characteristics include mono Class-D operation, output capability up to 70 W, and total harmonic distortion plus noise of 0.2% under the conditions described by the manufacturer. The 32-HTSSOP construction integrates the power stage in a surface-mount package, while the exposed pad provides the primary thermal connection to the PCB. These features suit applications where acoustic output power and compact implementation are more important than zero-order class operation. The TAS5111A architecture is intended for use as the output stage of a digital audio system. Because it is a power-stage IC rather than a complete codec or signal processor, the upstream system must supply the required digital audio signal and the associated control and bus infrastructure. Designers should match the input interface, supply arrangement, speaker impedance, and filtering requirements to the reference design before releasing a production board. Typical uses include powered speakers, soundbars, subwoofers, automotive audio systems, home-theater equipment, and compact consumer speakers. The mono architecture makes it particularly appropriate for a single loudspeaker or for a balanced arrangement in which two devices drive separate left and right channels. Its 70 W capability supports substantially more output than a conventional low-power analog amplifier while retaining a compact surface-mount footprint. The exposed thermal pad is a critical design feature. A PCB with adequate copper area and thermal vias should connect the pad to a ground plane, while output inductors and input filtering must follow the manufacturer reference layout. Correct thermal design preserves output-current capability, limits junction temperature, and reduces the risk of thermal shutdown during sustained high-power playback. This page organizes the key electrical, package, thermal, application, and sourcing information for TAS5111ADAD while clearly separating unknown characteristics. It also provides a package-aware selection guide, practical layout guidance, and a comparison framework focused on genuine same-footprint replacement decisions.

RFQ צור קשר
TAS5111DAD - 70W Mono Class D Power Stage | Texas Instruments
TAS5111DAD

TAS5111DAD - 70W Mono Class D Power Stage | Texas Instruments

The Texas Instruments TAS5111DAD is a mono Class D digital amplifier power stage rated for 70 W RMS into a 4-ohm bridge-tied-load speaker. It is packaged as a 32-pin HTSSOP power device and is intended for audio systems that use a separate digital audio processor to generate the PWM command signals. Its primary function is efficient speaker drive, while its digital control architecture provides the interface required by a host audio processor. A Class D digital amplifier power stage is a semiconductor subsystem that converts processor-generated pulse-width-modulated signals into a high-current differential output capable of driving a loudspeaker. It belongs to the amplifier IC hierarchy and, more broadly, to audio signal-chain and power-conversion electronics. Compared with a traditional linear audio output stage, the switching architecture can reduce wasted energy and heat while supporting compact audio products with high output power. According to the Texas Instruments datasheet, the TAS5111DAD supports 70 W RMS power in a bridge-tied-load configuration into 4 ohms with less than 1% distortion. The device is specifically positioned for DVD receivers, home-theatre systems, mini and micro component systems, and internet music appliances. Its mono architecture is useful when a system needs independent amplification for separate left and right speakers using two power stages. The power stage receives digital audio information rather than a conventional analog audio waveform. A digital audio processor performs filtering, volume control, and modulation before sending PWM data to the TAS5111DAD. This division of responsibility allows system designers to separate digital signal processing from the high-power analog output stage, simplifying control of volume, equalization, channel mapping, and system-level mute behavior. Typical implementations include powered home-theatre speakers, compact stereo systems, multimedia speakers, and internet-music appliances. In each case, the TAS5111DAD can drive a low-impedance speaker from a short digital command path while leaving decoding and signal processing to a companion controller. The design must still account for the device's thermal requirements, exposed-pad layout, output filtering, and speaker wiring. Use the manufacturer datasheet for the exact pin assignment, power-supply limits, control-interface timing, output filter recommendations, and exposed-pad layout. The 32-pin HTSSOP power package requires a carefully designed PCB with adequate copper for heat dissipation and very low-impedance power and ground connections. Incorrect filtering or poor thermal coupling can limit performance even when the electrical power capability is sufficient. This product record combines the device's published power rating, package identity, application targets, and sourcing information with practical guidance on PCB implementation, thermal management, filtering, and system integration. It also provides verified source links for engineers comparing the TAS5111DAD with other mono Class D output stages.

RFQ צור קשר
TAS5111DADR - 70W Mono Class-D Amplifier | Texas Instruments
TAS5111DADR

TAS5111DADR - 70W Mono Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5111DADR is a mono Class-D digital amplifier power stage rated for 70 W RMS bridge-tied-load output into a 4-ohm speaker, with a 93 W description also used for the device, in a 32-pin HTSSOP package with an exposed pad. It is designed to operate with a compatible digital audio processor and provides an efficient power-conversion solution for consumer audio equipment. A Class-D audio power stage is a switching amplifier topology in which the output transistors operate at high frequency and continuously. Compared with a linear amplifier, this approach can provide higher output power efficiency and lower heat dissipation for the same delivered audio power. Within the power-management hierarchy, the TAS5111DADR converts processed digital audio signals into a bridge-tifferentiated speaker output, requiring careful power-rail and output-filter design. The primary reported performance feature is 70 W RMS power into a 4-ohm load in bridge-tied-load operation. The device is identified as a one-channel mono Class-D audio amplifier IC, making it appropriate for subwoofers, powered speakers, compact home-theater systems, and single-channel speaker arrangements. Its 32-pin HTSSOP package uses an exposed pad to improve heat transfer from the power stage into the PCB copper area. The TAS5111 family is intended to work with a digital audio PWM processor rather than accepting conventional analog audio directly. This division of responsibility allows the digital processor to perform filtering, volume control, and modulation before the TAS5111 converts the PWM stream into a high-power analog speaker waveform. The class-D topology also makes efficient use of available supply power, although actual output capability depends on supply voltage, speaker impedance, cooling, and PCB layout. Typical applications include DVD receivers, home-theater amplifiers, mini and micro component audio systems, and internet music appliances. The monolithic power-stage approach can simplify analog output design compared with a discrete transistor output stage, while its exposed-pad package requires deliberate thermal via and copper-plane implementation to dissipate heat effectively. For a new design, follow the manufacturer datasheet for power-supply decoupling, LC filter selection, exposed-pad grounding, and speaker-output routing. Treat the published 70 W rating as a controlled test-condition figure rather than a universal continuous-power promise; use the recommended PCB and thermal design to establish the usable power level under the target enclosure temperature. This product page consolidates the device classification, package information, sourcing options, verified same-package replacement information, application guidance, and design cautions. It also distinguishes documented electrical facts from parameters that require confirmation in the manufacturer datasheet before schematic release or production qualification.

RFQ צור קשר
TAS5112DFD - 50W Stereo Class-D Amplifier | Texas Instruments
TAS5112DFD

TAS5112DFD - 50W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5112DFD is a two-channel Class-D digital audio power stage designed for 50 W per channel into a 6 ohm speaker load. The device uses a 16 V to 25.5 V supply, provides differential outputs, and is packaged in a 56-pin HTSSOP. It also supports digital audio inputs and is intended for stereo audio systems requiring efficient, integrated amplification. A Class-D digital audio power stage is an amplifier category that converts digital audio information into high-frequency switching waveforms and reconstructs the audio signal at the speaker output. Compared with a conventional linear power amplifier, the TAS5112DFD architecture is intended to provide higher power efficiency, typically reaching 90% into a 6 ohm load. The TAS5112DFD operates as part of the power-amplifier stage in a larger digital audio system. Key features include 50 W per channel in bridge-tied-load operation into 6 ohms, a listed 62 W maximum output power, and typically 90% power efficiency into a 6 ohm load. Dynamic range reaches 95 dB when used with the TAS5026D. Total harmonic distortion plus noise is listed below 0.1% for the TAS5026D system at 1 W and below 0.2% at the stated full-power condition. The device includes a self-protecting design covering undervoltage conditions and other fault states. Its digital input architecture makes it suitable for systems using a compatible digital audio PWM processor from the TAS50XX family. Differential outputs are intended for bridge-tied-load speaker connections, allowing the two amplifier channels to develop the required voltage swing without a conventional single-ended output stage. Typical uses include compact stereo loudspeakers, multimedia speaker systems, home-audio amplification, digital audio source modules, and powered speaker designs. The 50 W per-channel capability is particularly relevant to compact systems that need more output than a low-power integrated headphone or line amplifier can provide while retaining Class-D efficiency. Thermal design is essential because the power stage dissipates energy as heat, especially at sustained high output power. Follow the manufacturer datasheet for the exposed-pad layout, PCB copper requirements, thermal-interface guidance, supply decoupling, output-filter component values, and recommended inductor and capacitor selections. The 56-pin HTSSOP footprint also requires careful assembly planning because its leads and exposed thermal pad are fine-pitch features. This page consolidates the identified electrical ratings, package information, practical application guidance, and design considerations for engineers evaluating the TAS5112DFD. It also distinguishes documented device characteristics from application-dependent performance and highlights the unresolved need for a confirmed pin-to-pin drop-in replacement.

RFQ צור קשר
TAS5121DKD - 100W Mono Class D Audio Power Stage | TI
TAS5121DKD

TAS5121DKD - 100W Mono Class D Audio Power Stage | TI

The Texas Instruments TAS5121DKD is a mono Class D digital audio power stage rated for operation from a 10.8 V to 13.2 V supply and capable of delivering up to 100 W output power. The device is packaged in a 36-terminal HSSOP with gull-wing leads and is intended for commercial-temperature audio systems. According to the manufacturer datasheet, it is a digital-amplifier power stage designed to operate with a compatible TI PWM audio processor. A Class D audio power stage is a switching amplifier that converts a PWM command signal into a filtered, high-current audio output. Compared with a linear output stage, the Class D architecture reduces power loss and supports high output power with a compact package. In a complete audio system, the TAS5121DKD handles the power-amplification stage while upstream circuitry performs signal processing, channel routing, volume control, and PWM generation. The principal device attributes include mono Class D operation, 100 W output capability, a 10.8 V to 13.2 V supply range, and a 36-terminal HSSOP package. The commercial temperature grade makes the device suitable for audio products intended for standard commercial operating environments. Its digital power-stage role also allows it to work within TI's PurePath Digital audio architecture rather than accepting a conventional analog voltage directly at its output-driver input. The TAS5121 family is described as a high-performance digital-amplifier power stage intended to drive a four-speaker system up to 100 W. Individual channels may be configured and combined at the system level according to the design requirements, while the PWM interface preserves a digital signal path from the audio processor to the power stage. Thermal design, output filtering, power-supply capacity, and correct interface timing remain central implementation concerns. Typical uses include powered speakers, multimedia speaker systems, active subwoofer or full-range output stages, and compact home-audio products requiring a mono Class D power channel. The 100 W rating makes the device appropriate for systems whose speaker impedance, supply voltage, thermal design, and output-filter network support that operating level. Lower power designs can also use the device when the amplifier is not driven continuously at its maximum output capability. Design the supply and output network with conservative current and thermal margins. The 36-lead HSSOP requires careful PCB layout for high-current connections and stable ground return paths, while the exposed thermal path and copper area must support the intended dissipation. Use the manufacturer pin-description table and reference layout when assigning nets, and confirm that the external PWM processor supplies signals with the required timing and amplitude. This product page combines manufacturer and distributor identification with practical implementation guidance, package details, sourcing information, and a conservative replacement assessment. The comparison data distinguishes verified drop-in options from products that merely share a related family or package, helping engineers avoid choosing a mechanically similar amplifier without confirming pin and interface compatibility.

RFQ צור קשר
TAS5121DKDR - 100W Mono Class D Amp | Texas Instruments
TAS5121DKDR

TAS5121DKDR - 100W Mono Class D Amp | Texas Instruments

Texas Instruments TAS5121DKDR is a 1-channel mono Class D digital power-stage amplifier rated for 100 W into a 4 ohm load, with a 10.8 V to 13.2 V supply range, housed in a 36-pin HSSOP package with an exposed pad. It accepts digital audio inputs and includes short-circuit, thermal-event, and shutdown functions. A Class D amplifier is a switching audio power amplifier that converts a digital pulse-width-modulated input into a high-current, filtered speaker output. It belongs to the hierarchy of digital amplifiers, audio amplifiers, amplifier ICs, and power-management semiconductors. Compared with a linear output stage, its switching architecture can support high output power efficiently while leaving less energy in the device during amplification. The TAS5121DKDR's headline specifications are 100 W output into 4 ohms, a 13.2 V maximum listed supply, and a 36-terminal HSSOP package. Its digital input architecture allows it to operate with a compatible TI audio host or PWM source. Short-circuit protection, thermal-event protection, and shutdown mode support safer system integration when the amplifier is used in consumer audio, portable equipment, or powered speaker designs. The mono configuration means one power stage drives one speaker channel, while the separate digital control interface supports clocked audio data. The exposed package pad provides the primary thermal path from the switching power stage to the PCB. Its thermal performance therefore depends strongly on copper area, via placement, enclosure airflow, and the operating load rather than only on the nominal package rating. Typical uses include powered speakers, subwoofers, compact consumer-audio systems, soundbars, portable audio products, and multimedia equipment. The device is particularly appropriate when a host processor already generates the required digital audio signal and the system needs a dedicated high-power mono output stage. The 10.8 V minimum supply should be considered when sizing the upstream regulator. Design the PCB with the exposed pad tied to ground, adequate input and output decoupling, and short, wide power-loop paths. Confirm the speaker impedance, PWM format, clock configuration, thermal limits, and shutdown polarity against the manufacturer datasheet. Avoid long output traces or narrow copper connections that can increase inductance, ringing, and power loss at high current. This page combines the component's manufacturer-defined electrical and packaging characteristics with practical thermal guidance, source-backed alternatives, and an application-oriented comparison. It is intended to help engineers evaluate the TAS5121DKDR as a high-power mono Class D output stage and identify whether a verified pin-compatible alternative is appropriate for the target design.

RFQ צור קשר
TAS5122DFD - 30W Stereo Class-D Power Stage | Texas Instruments
TAS5122DFD

TAS5122DFD - 30W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5122DFD is an integrated stereo Class-D digital amplifier power stage designed for 6 ohm speaker loads, delivering up to 30 W per channel from a 0 V to 25.5 V supply. The device uses PWM input and PurePath Digital technology, with the power stage housed in a 56-pin HTSSOP package. It is intended for digital audio systems that use a TAS50xx-class processor and passive output filtering. A Class-D digital power stage is an audio amplifier that switches its output between supply rails at a high carrier frequency. Compared with a linear amplifier, this architecture can provide much higher conversion efficiency and lower heat generation in portable and compact audio equipment. The TAS5122DFD operates in the class-D amplifier, digital power amplifier, audio power IC, and power management semiconductor categories. The main operating characteristics are 30 W per channel into a 6 ohm load, a 0 V to 25.5 V supply range, and a 56-pin HTSSOP package. The PWM interface is intended to receive a digital audio signal from a compatible digital audio processor, while a passive demodulation filter reconstructs the audio waveform at the speaker output. These features make the device suitable for home theater receivers, DVD receivers, mini or micro component systems, and internet music appliances. The main technical benefit is efficient stereo amplification in a single integrated power-stage package. Because the output stage operates by switching, designers can reduce the heat associated with linear amplification, although filtering, layout, power-supply stability, and speaker impedance remain important. The manufacturer datasheet identifies the TAS5122 family as a high-performance integrated stereo digital amplifier power stage and describes its use with a digital audio PWM processor and passive demodulation filter. TAS5122DFD is suited to systems requiring two amplified channels, including home theater equipment, DVD receiver output stages, compact stereo systems, and network-connected audio products. It is particularly relevant when a system already uses a digital audio processor because the TAS5122DFD accepts PWM audio rather than conventional analog line-level input. System-level input filtering and gain planning must therefore be matched to the source processor and speaker load. During layout, follow the manufacturer datasheet recommendations for the exposed pad, power-supply connections, output networks, and high-current ground paths. The HTSSOP thermal pad and surrounding copper are important for heat transfer at higher output power. Confirm the maximum power dissipation for the intended supply voltage, load impedance, channel loading, and ambient temperature before selecting the output-filter components and board construction. This page combines the manufacturer electrical description with an engineering-focused view of the TAS5122DFD, including application fit, drop-in replacement considerations, layout cautions, and a parameter comparison. It is intended to help designers evaluate the power stage quickly while still using the manufacturer datasheet as the controlling document for ratings, pin connections, and production design details.

RFQ צור קשר
TAS5132DDV - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5132DDV

TAS5132DDV - 20W Stereo Class-D Amplifier | Texas Instruments

Texas Instruments TAS5132DDV is a stereo digital Class-D audio power-stage amplifier rated for 20 W per channel in stereo operation and 40 W in mono operation. It accepts a PWM input signal and operates from a 0 V to 19 V supply. The device is packaged in a 44-pin HTSSOP with the DDV designation. Its Class-D architecture places the power-amplification stage close to the speaker load, supporting efficient audio playback in compact systems. A Class-D audio amplifier is a switching power amplifier that converts a PWM command signal into a filtered, high-current speaker waveform. It belongs to the hierarchy audio amplifier, digital amplifier, power amplifier, and semiconductor. Unlike a linear output stage, the switching architecture reduces the energy dissipated by the output devices during many operating conditions. The TAS5132DDV is specifically positioned as a digital power stage because its input is PWM rather than a conventional low-level analog audio signal. The primary headline capabilities are 20 W stereo output, 40 W mono output, and a 0 V to 19 V supply range. These specifications make the device suitable for powered speakers, compact audio systems, sound bars, and other applications that require efficient stereo amplification. The 44-pin HTSSOP package provides a high pin count for power delivery, control connections, and signal routing, although the exact terminal assignments and exposed-pad requirements must be taken from the manufacturer pin configuration. The PWM-input architecture allows a digital audio source to supply the modulation signal directly. System designers therefore need to account for the switching nature of the stage, output-filter design, speaker impedance, supply capability, and system grounding. The manufacturer product page identifies the TAS5132 as a 20 W stereo, 40 W mono, 0 V to 19 V PWM-input Class-D audio amplifier, making the device appropriate when a power stage must be paired with a digital modulator upstream. Typical applications include compact stereo speakers, multimedia speaker systems, home-audio products, portable powered speakers, sound-bar transducers, and auxiliary audio modules. In each case, the upstream audio engine must generate a compatible PWM signal, while the power supply must remain within the stated 0 V to 19 V operating range. Mono operation can be used where a single channel must deliver the higher 40 W output rating. The principal design consideration is that this device is a power stage rather than a complete audio input amplifier. Signal conditioning, volume control, tone control, and PWM generation must be implemented elsewhere when required. Designers should also follow the manufacturer datasheet for output-filter component selection, thermal management, exposed-pad layout, supply bypassing, and maximum electrical limits rather than inferring those details from the package name. This page combines the exact manufacturer power and supply ratings with practical placement guidance, application analysis, and a strict drop-in-replacement assessment. It also distinguishes verified device characteristics from parameters that require confirmation in the complete manufacturer datasheet, helping engineers plan sourcing and design reviews without relying on unverified substitutes.

RFQ צור קשר
TAS5142DDV - 100W Stereo Class-D Power Stage | Texas Instruments
TAS5142DDV

TAS5142DDV - 100W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5142DDV is a 100 W stereo, 200 W mono PWM-input Class-D audio amplifier power stage with a 0 V to 34 V supply range, packaged in a thermally enhanced 44-pin HTSSOP (DDV). The device provides two amplifier channels and supports bridged-tie-back and parallel-bridged-tie-back output configurations for powered speakers and audio systems. A Class-D audio power amplifier is an efficient switching amplifier that converts a PWM signal into a filtered, high-power audio output. It belongs to the amplifier IC hierarchy, which includes digital audio power stages, audio amplifiers, and integrated circuits. Compared with a conventional linear output stage, Class-D operation concentrates more of the supplied energy into the audio load, making it well suited to compact stereo and home-theater systems operating from a single supply rail. The TAS5142DDV supports up to 100 W per channel in stereo operation and up to 200 W in mono operation. Its supply input spans 0 V to 34 V. According to the Texas Instruments datasheet, signal-to-noise ratio exceeds 100 dB in A-weighted measurement, while total harmonic distortion plus noise remains below 0.1% at 1 W. Output capability is specified for 4 Ω, 6 Ω, and 8 Ω bridged loads, as well as 2 Ω and 3 Ω parallel-bridged configurations. The device uses PWM signaling and multiple power-output stages to reproduce the supplied audio waveform. Its thermally enhanced HTSSOP construction provides dedicated power and ground connections needed to carry substantial output current. Exact pin assignments, exposed-pad requirements, output-current limits, and protection thresholds should be taken from the pin-description and absolute-maximum-rating tables in the manufacturer datasheet. Typical applications include powered bookshelf speakers, home-theater amplifier modules, multimedia speaker systems, active subwoofer enclosures, and compact consumer audio products. The 44-pin DDV package makes the part appropriate for multilayer PCB layouts where the exposed thermal pad and copper area can be connected to an effective thermal path. Thermal design is the principal implementation concern because the amplifier can dissipate substantial heat as output power rises. Keep the exposed pad on a continuous ground plane, use the recommended via pattern, provide adequate copper on both sides of the PCB, and confirm junction temperature against the worst-case load, supply voltage, and ambient temperature. The LC output-filter and speaker-load requirements listed in the datasheet must also be followed to preserve stability and audio performance. This product page combines the manufacturer’s headline power ratings with package, thermal, comparison, and application guidance for engineers evaluating the TAS5142DDV. It supports faster part selection by separating verified electrical capabilities from unresolved design details that must be confirmed against the latest datasheet and PCB guidelines.

RFQ צור קשר
TAS5142DKD - 100W Stereo Class-D Amplifier | Texas Instruments
TAS5142DKD

TAS5142DKD - 100W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5142DKD is a 100 W stereo, 200 W mono Class-D digital audio power amplifier with PWM input, a 0 V to 34 V supply range, and a 36-pin HSSOP package with an exposed thermal pad. It is designed for high-output audio systems where efficient amplification, integrated protection, and compact implementation are important. A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to reproduce audio signals with high efficiency. It belongs to the hierarchy of amplifier ICs, audio amplifiers, power amplifiers, and power-management semiconductors. Compared with a conventional linear Class-AB output stage, a Class-D design can reduce power dissipation in the output stage and support higher output power from a compact package, although switching-node design still requires careful filtering and layout. The TAS5142DKD can drive a 4 ohm bridge-tied load at up to 100 W per channel in stereo operation. It can also be configured for 200 W mono operation according to the Texas Instruments product page. Its integrated digital power stage includes an improved protection system, low integrated output noise, low THD+N performance, and low idle power dissipation. These characteristics suit consumer audio equipment, powered speakers, home-theater systems, and compact multimedia products. The DKD package provides 36 pins and an exposed thermal pad for heat dissipation. The thermal pad and exposed-lead soldering process are central to achieving the stated output-power capability, while the analog supply operates from 10.8 V to 13.2 V. The device accepts a PWM audio input, allowing it to operate after a digital audio source has already been converted into a PWM representation. Typical uses include powered bookshelf speakers, compact stereo amplifiers, home-theater receivers, soundbar amplification, and multimedia speaker systems. A 4 ohm stereo configuration supports up to 100 W per channel, while parallel-channel or mono arrangements can address applications requiring up to 200 W. Output inductors, LC filters, speaker connections, and thermal management remain part of the complete power-amplifier design. For reliable operation, use the manufacturer’s recommended PCB land pattern and thermal-pad soldering process, keep high-current output paths compact, and connect the exposed thermal pad to an effective copper heat-spreading area. Speaker loads must remain within the device’s supported limits, and the output-filter design must preserve the intended audio bandwidth while controlling switching artifacts. This page organizes the verified device specifications, drop-in sourcing information, application fit, and practical layout guidance in one engineering-focused reference. It also identifies package and lifecycle details that should be checked against the current Texas Instruments documentation before committing a new production design.

RFQ צור קשר
TAS5152DKD - 125W Stereo Class D Power Stage | Texas Instruments
TAS5152DKD

TAS5152DKD - 125W Stereo Class D Power Stage | Texas Instruments

The Texas Instruments TAS5152DKD is an integrated stereo Class D digital amplifier power stage rated for 125 W per channel into a 4-ohm loudspeaker at 10% THD+N. The device operates from a 10.8 V to 13.2 V supply and is packaged in a 36-pin HSSOP. It is intended for high-power, high-efficiency stereo audio systems where a compact power stage and integrated protection are important. A Class D power stage is a switching amplifier category that uses pulse-width-modulated drive signals to transfer energy to a loudspeaker. Compared with a conventional linear audio amplifier, the Class D architecture can achieve higher conversion efficiency while reducing the amount of heat that must be removed during operation. The TAS5152DKD belongs to the broader hierarchy of audio amplifiers, power amplifiers, power-management semiconductors, and integrated circuits. The integrated design includes gate drivers, four matched and electrically isolated enhancement-mode N-channel power DMOS transistors, and protection and fault-reporting circuitry. Its 125 W stereo output capability suits powered speakers, home-theater amplification, professional audio, and other high-output audio designs. Operation from a 10.8 V to 13.2 V supply supports conventional 12 V power-system architectures, while the listed 0 V to 37 V operating-voltage range provides additional design context. The TAS5152 is described by Texas Instruments as a third-generation, high-performance integrated stereo digital amplifier power stage with an improved protection system. Combining the output transistors and their drivers within the power-stage package reduces the number of discrete power devices required around the amplifier. The four electrically isolated DMOS devices support the full-bridge structure used by each Class D output channel. Typical applications include 125 W stereo speaker amplification, powered loudspeakers, home-theater receiver output stages, multichannel audio systems, and compact consumer or professional audio products. System designers should select the power supply, output filter, speaker load, PCB copper, and thermal solution together because output power alone does not establish safe operating conditions. For PCB implementation, follow the manufacturer pin-description table, exposed-pad connection guidance, recommended output-filter layout, and thermal design recommendations. A 12 V-class supply is the intended operating environment, and the design must preserve adequate headroom, signal integrity, output filtering, and heat-spreading paths to sustain the advertised 125 W result. This page combines the verified device specifications, application guidance, package information, and a parameter-level engineering comparison that helps engineers evaluate the TAS5152DKD for high-power stereo amplifier designs.

RFQ צור קשר
TAS5162DDV - 210W Stereo Class-D Amplifier | Texas Instruments
TAS5162DDV

TAS5162DDV - 210W Stereo Class-D Amplifier | Texas Instruments

Texas Instruments TAS5162DDV is a two-channel Class-D digital audio power amplifier rated for 210 W per channel into a 6-ohm bridge-tied load at 10% total harmonic distortion. It accepts a 0 V to 52.5 V amplifier supply and 10.8 V to 13.2 V digital supply, uses a PWM input interface, and is packaged in a 44-pin HTSSOP with an exposed thermal pad for thermal management. A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to represent an analog audio waveform. It belongs to the broader power-amplifier hierarchy and converts digital or PWM control signals into high-current bridge-tied speaker outputs. Compared with a linear amplifier, a properly implemented Class-D stage can deliver high output power with lower power dissipation, making it suitable for home theater, multichannel audio, powered speakers, and compact high-performance sound systems. The TAS5162DDV combines a 160 W stereo configuration with a 300 W mono capability in one integrated device. Each channel can deliver up to 210 W into 6 ohms at 10% THD, while the product page identifies improved protection, low integrated output noise, low THD+N without clipping, and low idle-power dissipation. Internal pull-up resistors on the shutdown and overtemperature-warning outputs can connect those signals to 3.3 V; external pull-ups support 5 V logic levels. As a digital power stage, the device combines PWM command processing with integrated output-driver circuitry and an exposed-pad thermal interface. The 44-pin HTSSOP package provides the electrical connections required for PWM audio input, clocking, control, fault signaling, power rails, ground, and differential speaker outputs. Because output energy is dissipated in the power stage, the exposed thermal pad and PCB copper area are central to maintaining reliable operation at high continuous output power. Typical uses include powered stereo speakers, home-theater amplifiers, multimedia speaker systems, active subwoofers, and high-output consumer audio equipment. The TAS5162 can also be configured for mono operation when greater output power is required. System designers should match the speaker impedance, supply capability, switching layout, and thermal design to the intended channel configuration. For PCB implementation, place input and power decoupling close to the relevant device pins, connect the exposed pad to a properly sized thermal plane, and keep high-current speaker outputs away from sensitive audio inputs. The manufacturer datasheet's pin-description table and typical application circuit should govern net assignment, output-filter design, and thermal-pad connection. This page organizes the TAS5162DDV's principal electrical ratings, protection features, application guidance, package information, and engineering trade-offs. It also highlights where pin-compatible substitutions require additional qualification rather than assuming that similar audio amplifiers are automatic board-level replacements.

RFQ צור קשר
TAS5162DKD 2x210W Stereo Class-D Power Stage | Texas Instruments
TAS5162DKD

TAS5162DKD 2x210W Stereo Class-D Power Stage | Texas Instruments

The Texas Instruments TAS5162DKD is a two-channel stereo digital Class-D audio amplifier power stage capable of delivering up to 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N. It accepts a 0 V to 52.5 V supply, supports PWM input, and is packaged in a 36-pin HSSOP with an exposed pad. A Class-D audio power stage is a switching amplifier topology that efficiently converts PWM signals into high-current audio outputs. Compared with a linear amplifier, the Class-D architecture places the active device in the saturation and cutoff regions, reducing conduction dissipation and supporting high output power in a compact package. The TAS5162 integrates the stereo output stage, protection functions, and digital control interfaces required by powered speakers and multi-channel audio systems. Key capabilities include 210 W per channel into a 6 ohm bridge-tied load at 10% THD+N, operation across a 0 V to 52.5 V supply range, and an improved protection system. The device is suitable for professional audio, consumer audio, home-theater equipment, powered speakers, and compact subwoofer systems. Its integrated digital power-stage architecture simplifies the output path while retaining flexible signal-control and fault-reporting functions. The TAS5162 accepts a PWM input signal and drives each output as a bridge-tied load, eliminating the need for output coupling capacitors when the specified load arrangement is used. Its integrated protection system is intended to improve reliability under normal overload and fault conditions. The exposed thermal pad must be connected to a suitable thermal and ground plane so heat can leave the package efficiently during high-power operation. Typical applications include 210 W stereo speaker amplifiers, bridged mono installations, powered bookshelf and floor-standing speakers, home-theater receivers, professional powered speakers, and subwoofer amplifiers. The 52.5 V maximum supply supports high rail voltage, but the power stage still requires careful thermal design, low-impedance PCB routing, suitable output filtering, and protection against transient overvoltage. The most important design consideration is power delivery at low impedance. Output-current capability, copper width, connector sizing, heat spreading, and the thermal resistance of the exposed pad all influence whether the amplifier can sustain its rated output continuously. Use the manufacturer power-stage application guidance and thermal data when selecting the power-supply capability, output filter, copper area, and enclosure ventilation. This product page consolidates the key TAS5162DKD specifications, package information, application guidance, sourcing path, and replacement assessment into one engineering-focused reference. It also identifies where additional datasheet data, pin-level details, and qualified alternatives are required before a board-level design is released.

RFQ צור קשר
TAS5176DDW - 6-Ch 100W Class-D Stage | Texas Instruments
TAS5176DDW

TAS5176DDW - 6-Ch 100W Class-D Stage | Texas Instruments

Texas Instruments TAS5176DDW is a six-channel, 100-W digital-amplifier power stage with PWM input, designed for 5.1-channel audio systems and configured for a 0-V to 34-V supply in a 44-pin HTSSOP package. Its six integrated output channels support multichannel Class-D amplification while the 10.8-V to 13.2-V PWM operating range provides a defined supply window for the power stage. A Class-D amplifier is a switching audio power amplifier whose output stage operates in a PWM state rather than continuously conducting a linear signal. This architecture belongs to the amplifier IC category and reduces the power dissipated by the output devices compared with a linear amplifier of comparable output capability. The TAS5176 integrates six digital power channels into one package, making it suitable for home-theater receivers, active speakers, soundbars, and multichannel automotive audio systems. The primary headline specifications are six output channels, up to 100 W of power capability, and a 0-V to 34-V supply range. The device accepts PWM signals directly, allowing it to work with a digital audio processor or PWM-generating audio engine. Its HTSSOP package contains 44 pins and provides a high-channel-count solution without requiring six separate power packages. The power stage is also suitable for subwoofer use when individual channels are configured appropriately. Class-D amplification places strict demands on power-supply layout, switching-node control, and thermal management. The supply and ground connections must provide low-impedance paths for high switching currents, while the exposed thermal pad and PCB copper must remove heat effectively. Incorrect output-filter or speaker-load design can increase distortion and reduce protection margin, so the manufacturer datasheet configuration should govern component selection and board implementation. Typical applications include 5.1-channel home theater amplification, active multiway speakers, powered subwoofers, compact multimedia systems, and automotive entertainment systems. An external digital audio processor can generate the PWM inputs, while the TAS5176 supplies the high-current channel drive. The six-channel arrangement also allows systems to combine several channels for higher-power BTL operation when the application and thermal design permit it. The principal design trade-off is the need for careful high-current layout and heat removal. Compared with a linear output stage, Class-D efficiency can reduce waste heat, but a 44-pin HTSSOP power package still requires careful attention to copper area, via arrays, thermal vias, and output filtering. Verify speaker impedance, supply capability, channel configuration, and maximum dissipated power before releasing a production layout. This page consolidates the exact orderable-device specifications, package information, application guidance, comparison fields, and engineering checks needed to evaluate TAS5176DDW. It also distinguishes confirmed technical facts from parameters that require confirmation in the full manufacturer datasheet before layout or production decisions.

RFQ צור קשר
TAS5182DCA - 100W Stereo Class-D Controller | Texas Instruments
TAS5182DCA

TAS5182DCA - 100W Stereo Class-D Controller | Texas Instruments

Texas Instruments TAS5182DCA is a 100 W stereo digital amplifier power-stage controller with PWM input, Class-D output, and support for up to 34 V supply voltage. The device is packaged in a 56-pin HTSSOP and is specified for an ambient temperature range of 0°C to 70°C. It is designed to control external power stages for stereo audio systems. A Class-D audio power-stage controller is a semiconductor that processes a digital audio input and generates PWM drive signals for external H-bridge transistors. Unlike a conventional analog-output audio amplifier, the controller leaves power amplification to external MOSFETs, allowing output capability to scale with the selected power stage. It belongs to the digital audio amplifier and power-management IC hierarchy. The TAS5182DCA supports stereo operation at up to 2 × 100 W RMS into a 6 Ω bridge-tied load when paired with an appropriate external power stage. Its typical total harmonic distortion plus noise is below 0.15% under the conditions identified in the manufacturer documentation. PWM input and a 0 V to 34 V supply range suit higher-power consumer and professional audio architectures. Because TAS5182DCA is a controller rather than a self-contained power amplifier, its realized output power depends on external transistors, gate-drive implementation, supply capability, layout, thermal management, and speaker impedance. The IC controls the digital audio path while the external power devices carry the loudspeaker current. This division improves flexibility compared with integrating the output transistors into the controller package. Typical uses include stereo loudspeaker systems, powered speakers, home-theater receivers, professional audio racks, and compact consumer audio products. The 56-HTSSOP package supports high-density PCB layouts, while the exposed thermal pad provides a thermal connection to the board copper. The 0°C to 70°C rating targets commercial ambient environments rather than extended industrial or automotive temperature ranges. Careful power-stage layout is essential because switching currents and gate-drive timing directly affect distortion, thermal performance, and EMI. Keep high-current power loops compact, provide local supply decoupling, use low-inductance gate-drive paths, and connect the thermal pad to an appropriately sized copper area. Select the external MOSFETs and output filter against the intended load and switching requirements. This product record combines the controller’s principal operating characteristics with application guidance, verified package information, and drop-in replacement analysis. It also distinguishes the IC’s fixed control function from the variable output power contributed by the external transistor stage, helping engineers evaluate the complete amplifier rather than relying on the nominal controller rating alone.

RFQ צור קשר
TAS5182IDCA - 100W Stereo Class-D Audio Controller
TAS5182IDCA

TAS5182IDCA - 100W Stereo Class-D Audio Controller

The Texas Instruments TAS5182IDCA is a stereo digital amplifier power-stage controller rated for 2 × 100 W RMS output at 6 V in bridge-tied-load (BTL) configurations. The device provides two-channel Class-D control, supports external discrete MOSFET output stages, and is packaged in a 56-pin HTSSOP. Its typical total harmonic distortion plus noise is below 0.15% at 1 kHz, making it suitable for high-power home-theater and powered-subwoofer systems. A digital amplifier power-stage controller is an integrated circuit that interprets an audio input and generates gate-drive signals for external switching MOSFETs. Unlike a conventional analog audio power amplifier, the TAS5182IDCA places the high-voltage and high-current switching function in discrete transistors. This separates signal processing from power conversion, allowing the external MOSFET stage to determine much of the amplifier's voltage, current, thermal, and output-power capability. The controller therefore belongs to the Class-D amplifier, digital audio amplifier, power-management IC, and semiconductor hierarchy. The 2 × 100 W capability at 6 V describes controller-supported BTL operation rather than the output of an integrated monolithic power stage. Engineers must select suitable N-channel power MOSFETs, a power-supply arrangement, an output filter, and a thermal design that match the target impedance and enclosure. The low typical distortion figure makes the controller appropriate for music reproduction systems where audible waveform deviation should remain low across the audio band. The TAS5182 architecture is intended to work with discrete bridge-tied-load output stages. In each half-bridge, the controller drives the gates of the high-side and low-side MOSFETs with complementary signals. External LC output filtering converts the switched full-bridge waveform into a filtered analog output capable of driving a loudspeaker through a BTL network. Correct gate voltage, dead time, switching speed, and layout continuity are therefore essential to the controller's real-world performance. Typical uses include home-theater amplifiers, powered subwoofers, active loudspeakers, compact stereo systems, and other high-power Class-D audio products. The controller can also serve multi-channel systems when each stereo pair is assigned to separate channels. Compared with a monolithic amplifier, the discrete-MOSFET approach offers greater freedom in output-device selection, thermal partitioning, and power scaling, but it also increases design complexity and EMI sensitivity. PCB implementation requires short gate-drive loops, careful high-current return paths, a continuous output-filter ground reference, and separation between sensitive input and switching nodes. Place input, supply, and compensation components close to their associated pins. Use thermal vias beneath exposed-pad structures where applicable and verify the selected MOSFETs, inductor, and capacitor ratings against the intended 6 V BTL operating point. EMI filtering must be evaluated together with the switching layout rather than added only after enclosure testing. This product page combines the controller's verified power and distortion ratings with package information, application guidance, drop-in family comparisons, and practical PCB design notes. It is intended to accelerate engineering selection while making the system-level responsibilities of an external-MOSFET Class-D output stage explicit.

RFQ צור קשר
TAS5186DDV - 6-Channel 210W Class D Power Stage | TI
TAS5186DDV

TAS5186DDV - 6-Channel 210W Class D Power Stage | TI

The Texas Instruments TAS5186DDV is a six-channel Class D digital-amplifier power stage rated for 210 W total output power, with 105 dB A-weighted SNR, less than 0.05% THD+N at 1 W, and greater than 90% power-stage efficiency at 1 W into the recommended single-ended loads. The device is housed in a 44-terminal HTSSOP package and operates from a 10.8 V to 13.2 V supply. A Class D power stage is an audio-amplifier output circuit that switches its supply rails at high frequency to produce a filtered audio waveform. It belongs to the amplifier IC hierarchy, where a digital-input power stage removes the need for external analog audio-input circuitry when it is paired with a compatible audio codec or digital-audio processor. Its principal advantages are high conversion efficiency, compact implementation, and integration of speaker-output protection. The TAS5186DDV provides six independent amplification channels for multichannel audio systems. Its published performance includes 105 dB A-weighted signal-to-noise ratio, THD+N below 0.05% at 1 W, and efficiency above 90% into recommended loads. Integrated protection covers undervoltage, overtemperature, overload, and short-circuit conditions, reducing the amount of discrete protection required around each speaker output. Digital inputs allow the amplifier to receive audio samples directly from an audio codec, DSP, or other digital-audio source. This architecture supports a compact signal chain and accurate channel synchronization. The 44-terminal HTSSOP package also provides a practical surface-mount footprint for multi-channel consumer and professional audio equipment, subject to careful thermal and layout design. Typical uses include powered speakers, soundbar amplifier boards, home-theater receiver power stages, active subwoofer systems, and compact multimedia speaker designs. Its six-channel architecture is particularly useful when one board must drive multiple surround-sound channels without implementing six separate discrete amplifier circuits. Designers should follow the manufacturer layout guidance for high-current speaker and power-ground paths, place the required decoupling capacitors close to the device, and verify copper area for thermal dissipation. Thermal performance depends on output power, channel utilization, load impedance, PCB copper, and ambient temperature, so a compact enclosure should be validated under worst-case multichannel conditions. This page combines the device's principal performance specifications, application guidance, design cautions, and identified pin-compatible family options for faster engineering selection. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning PCB nets and confirming thermal limits.

RFQ צור קשר
TAS5261DKD - 315W Mono Class D Amplifier | Texas Instruments
TAS5261DKD

TAS5261DKD - 315W Mono Class D Amplifier | Texas Instruments

The Texas Instruments TAS5261DKD is a 315 W mono bridge-tied-load Class D digital amplifier power stage packaged in a 36-pin HSSOP. It is designed to drive 4- to 8-ohm speakers with low harmonic distortion, and its digital input architecture requires a simple passive demodulation filter to produce high-quality, high-efficiency audio amplification. A Class D amplifier is a switching audio power stage whose output switches between the supply rails to amplify a pulse-width-modulated signal. After passive low-pass demodulation, this approach can provide high output power with lower power loss than a conventional linear audio amplifier. The TAS5261DKD belongs to the digital amplifier power-stage hierarchy, where an external input-processing stage generates the required modulation signal and the integrated power stage supplies current to the speaker load. The TAS5261DKD provides one mono amplification channel, supports 4- to 8-ohm speakers, and is identified as a 315 W mono BTL digital amplifier power stage. The manufacturer documentation also describes the device as a 400 W mono Class D amplifier, while the product-page description identifies a 315 W configuration. Its listed operating supply range is 10.8 V to 13.2 V. Digital inputs, short-circuit protection, and thermal protection are listed among the device features. The implementation uses a passive demodulation filter between the switching output and the speaker rather than an analog audio input stage. This architecture supports efficient amplification at relatively high output power, but the filter must be selected and laid out correctly because its response determines the recovered audio bandwidth, attenuation of carrier-related artifacts, and speaker-load stability. Typical uses include powered speakers, subwoofer amplifiers, professional audio equipment, consumer audio systems, and other mono loudspeaker applications operating from a 12 V-class supply. A bridge-tied-load configuration uses both output terminals to drive the speaker differentially, so the speaker remains connected between the two outputs rather than from one output to ground. PCB design should prioritize short power-stage connections, adequate thermal copper, a continuous supply path, careful grounding, and a stable reference return. The passive demodulation network should be placed close to the power-stage output, and its component values must follow the manufacturer reference design. Adequate copper area is important because Class D output current and supply transients can create losses, voltage drops, and EMI coupling even when the amplifier operates efficiently. This page combines the identified electrical ratings, package characteristics, application guidance, and manufacturer documentation links for engineering evaluation. It also distinguishes verified product facts from unspecified details so designers can consult the pin-description table, reference schematic, thermal guidance, and power calculations before committing a TAS5261DKD design to production.

RFQ צור קשר
TAS5261DKDR - 315W Mono Class D Power Stage | Texas Instruments
TAS5261DKDR

TAS5261DKDR - 315W Mono Class D Power Stage | Texas Instruments

The Texas Instruments TAS5261DKDR is a 315 W mono bridged-load-tie class D digital power stage packaged in a 36-terminal HSSOP. It is designed for high-efficiency audio amplification where a compact solution must deliver substantial continuous output power to a low-impedance loudspeaker. The device accepts digital audio data and operates as a mono class D output stage, supporting compact consumer and professional audio systems. A class D power stage is a switching amplifier topology that controls current through the speaker output at high frequency. Compared with a linear audio amplifier, the switching approach reduces the power dissipated in the output devices and enables high output power with smaller magnetic components. In the wider power-management hierarchy, the TAS5261 belongs to the class D amplifier family, which falls under audio amplifier ICs and, more broadly, power management semiconductors. Key characteristics include 315 W rated mono output power, a single-channel class D architecture, a 36-HSSOP package, and a bridged-load-tie speaker configuration. The HSSOP package uses a gull-wing surface-mount form factor and exposes a thermal pad for heat removal when the device is mounted according to the manufacturer's recommended land pattern. Its operating voltage, output-stage limits, thermal characteristics, and signal-interface timing should be confirmed against the specific version of the manufacturer datasheet before layout release. Typical implementations include powered speakers, compact home-theater enclosures, soundbars, multimedia speaker systems, subwoofer amplifier modules, and industrial audio products driven by an external audio processor. Because the device is a power stage rather than a complete codec-equipped amplifier, upstream circuitry must supply the required digital audio stream and control signals. A properly designed LC output filter is required to remove high-frequency switching energy before the loudspeaker. Layout is the dominant design consideration. Place the input, control, power, and output-network connections according to the datasheet reference layout, minimize loop area in high-current switching paths, and provide substantial copper area for thermal dissipation. Verify junction temperature at worst-case supply voltage, output power, and ambient temperature rather than relying on nominal board temperature alone. This page adds application-focused implementation guidance, pin-compatible sourcing information, and a structured comparison of the documented operating characteristics. Use the manufacturer datasheet and reference layout as the controlling documents for production design, EMC tuning, and thermal validation.

RFQ צור קשר
TAS5342DDV - 100W Stereo Class D Power Stage | Texas Instruments
TAS5342DDV

TAS5342DDV - 100W Stereo Class D Power Stage | Texas Instruments

Texas Instruments TAS5342DDV is a 100-W stereo digital amplifier power stage designed for Class D audio systems, supplied in a 44-HTSSOP package. The device is intended for stereo or bridge-tied-load (BTL) configurations and supports speaker loads up to 8 ohm. Its integrated digital power-stage design is intended to provide high output power with low harmonic distortion, low integrated noise, and low idle current for audio receivers, powered speakers, soundbars, and other compact audio systems. A digital Class D power stage is a semiconductor amplifier category that converts a digital audio signal into a high-current switching waveform and then reconstructs the audio output through the speaker and output filtering network. Within the power-management hierarchy, the TAS5342DDV combines an audio amplifier, power conversion function, output-driver capability, and integrated fault protection in one power-management IC. It is commonly paired with an audio DSP or digital-audio interface that generates the required PWM signals. The TI product page identifies the TAS5342 as a high-performance integrated stereo digital amplifier power stage capable of driving a bridge-tied load at up to 100 W per channel. The listed operating power-supply range is 0 V to 34 V, with a typical supply range of 10.8 V to 13.2 V. The device supports differential input and differential output arrangements, which help reject common-mode noise and allow flexible speaker-routing configurations. The integrated protection system is a major functional feature. Texas Instruments describes protection against multiple fault conditions, including output-related faults that could otherwise damage the power stage or connected speaker network. The 44-HTSSOP package provides a high pin count for power connections, signal routing, control functions, and thermal management. Because power amplifiers dissipate energy in their output stages, correct copper area, thermal-pad layout, heat spreading, and enclosure ventilation are essential in practical designs. Typical applications include powered stereo speakers, home-theater receivers, compact soundbars, multimedia speakers, and other consumer audio equipment. The 100-W-per-channel capability is useful when the loudspeaker load is nominally 8 ohm and the amplifier is operated within the manufacturer-recommended supply and thermal limits. The differential output structure also makes the device suitable for BTL speaker connections, where each channel drives the speaker differentially. For implementation, follow the pin-description table and recommended application circuit in the manufacturer datasheet when assigning the 44-HTSSOP land pattern. Keep the power-stage supply and output-current paths compact, provide adequate input and output filtering, and confirm that the exposed thermal pad is connected to the intended ground and copper area. The amplifier should not be selected solely by its headline wattage; speaker impedance, supply voltage, thermal dissipation, modulation scheme, and output-filter requirements determine the practical result. This page summarizes the key electrical, packaging, protection, and application characteristics of the TAS5342DDV and organizes them for faster design review. It also identifies the limits of directly replacing a power-stage IC: a valid drop-in candidate must match the package, pinout, supply assumptions, output architecture, and thermal requirements rather than merely share a similar wattage rating.

RFQ צור קשר
TAS5352DDV 125W Stereo Class-D Power Stage | Texas Instruments
TAS5352DDV

TAS5352DDV 125W Stereo Class-D Power Stage | Texas Instruments

The Texas Instruments TAS5352DDV is an integrated stereo digital Class-D amplifier power stage designed to drive a 4 ohm bridge-tied load at up to 125 W per channel. It operates from a 10.8 V to 13.2 V supply and is packaged in a 44-pin HTSSOP with an exposed thermal pad. The device provides a high-efficiency speaker-drive solution with low harmonic distortion, low integrated noise, and low idle current. A digital Class-D audio power amplifier is a power-management IC that switches its output stage rapidly between voltage states to reproduce an audio waveform. Its efficiency is generally higher than that of a conventional linear amplifier because the switching stage dissipates less power when driving a speaker load. Bridge-tied-load operation applies the audio waveform across the two speaker terminals, increasing the available output voltage and power without requiring a physical ground connection at the speaker. The TAS5352DDV integrates a stereo output stage and a complete on-chip protection system. Its principal output rating is 125 W per channel into a 4 ohm BTL load, while its listed operating supply range is 10.8 V to 13.2 V. The device is specified for low harmonic distortion and low integrated noise, making it suitable for compact high-power audio systems. Its low idle current can also reduce standby dissipation when the associated system power architecture requires low quiescent consumption. TAS5352 is positioned as a power stage rather than a complete audio input amplifier. A practical system therefore needs a source capable of supplying the appropriate input signal, control or codec circuitry where required, output filtering, and a correctly designed speaker network. The manufacturer documents internal pull-up resistors to 3.3 V on the SD and OTW outputs; external pull-up resistors can provide 5 V logic level compliance where that interface voltage is required. Typical uses include powered speakers, compact home-theater systems, professional audio equipment, soundbars, subwoofer power modules, and other high-efficiency speaker-drive products. A 10.8 V to 13.2 V supply is particularly compatible with systems organized around a 12 V rail, although final rail limits, startup behavior, current demand, and protection requirements must be evaluated against the complete amplifier design. Thermal design is central to achieving the 125 W per-channel rating. The exposed-pad HTSSOP construction requires a low-impedance PCB thermal path, adequate copper area, and suitable airflow or enclosure heat transfer. Decoupling capacitors must be placed close to the supply and ground pins, and output-filter layouts must keep high-current switching paths compact. Speaker wiring, connectors, and load selection must also support the intended channel power. This page consolidates the verified device identity, package information, operating limits, interface details, and drop-in assessment into an engineering-focused reference. It also distinguishes documented functional similarity from true pin-to-pin equivalence, helping designers avoid treating a related part as an automatic replacement without completing a footprint, signal, control, and thermal review.

RFQ צור קשר