מוצרים (46,000+)

XC7Z012S-2CLG485E - 55K Logic Cell Zynq SoC | AMD
XC7Z012S-2CLG485E

XC7Z012S-2CLG485E - 55K Logic Cell Zynq SoC | AMD

The AMD XC7Z012S-2CLG485E is a programmable system-on-chip combining a single Arm Cortex-A9 MPCore processor with CoreSight debug technology and an Artix-7 FPGA fabric. It provides 55K logic cells, a processor operating frequency of 766 MHz, and a 485-CSPBGA package measuring 19 mm by 19 mm. A Zynq-7000 SoC is a heterogeneous embedded-processing device that unifies a microprocessor system and programmable logic in one silicon package. The ARM Cortex-A9 processor executes operating-system and application software, while the FPGA fabric implements parallel data processing, custom interfaces, or hardware accelerators. This integration can reduce component count and avoid transferring large amounts of data across a separate processor-to-FPGA interface. Key features of the XC7Z012S-2CLG485E include its single-core Cortex-A9 configuration, 766 MHz operating frequency, and 55K programmable logic cells. The integrated SoC also includes a temperature sensor, watchdog timeout detection, and AES encryption support. These functions make the device applicable to industrial control, communications, embedded vision, and data-acquisition systems requiring both sequential software execution and parallel hardware logic. The -2 device designation identifies the speed grade, while CLG485 identifies the 485-ball chip-scale BGA package and E identifies the extended-temperature product variant. The verified product information specifies an operating temperature range of 0 °C to 100 °C for the junction. The SoC architecture combines software programmability with hardware programmability, allowing control functions, data pipelines, protocol handling, and accelerator logic to coexist in one device. Typical applications include industrial automation controllers, networked sensor gateways, camera and image-processing systems, test-and-measurement instruments, and embedded control platforms. The processor can manage communications, configuration, and supervisory functions, while parallel FPGA logic handles deterministic sampling, filtering, protocol conversion, or data acquisition at rates that would otherwise require additional logic devices. PCB implementation requires careful BGA layout, power-delivery design, thermal management, and signal-integrity control. Place the device according to the AMD package placement diagram, connect all required power and ground balls, and route high-speed interfaces with controlled impedance. The 19 mm by 19 mm CSPBGA package also requires a land pattern, mask, and assembly process capable of supporting its ball pitch and ball count. This page combines the exact manufacturer and distributor attributes, a same-footprint industrial-temperature alternative, a lower-speed same-family option, package references, and practical implementation guidance. It helps engineers identify whether the XC7Z012S-2CLG485E matches a design requiring a 766 MHz single-core Arm processor, 55K logic cells, and a 485-ball BGA footprint.

RFQ צור קשר
XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD
XC7Z012S-2CLG485I

XC7Z012S-2CLG485I - 766MHz Zynq SoC | AMD

AMD XC7Z012S-2CLG485I is a single-core Zynq-7000S system-on-chip combining a 766 MHz Arm Cortex-A9 processor with 55K Artix-7 FPGA logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. The integrated processor, programmable logic, memory controllers, and programmable I/O provide a compact heterogeneous computing platform for industrial control, machine vision, communications, and embedded edge systems. A Zynq-7000S SoC is a programmable system-on-chip that merges a hard processor subsystem with FPGA fabric in one device. The Cortex-A9 core executes operating-system-level software, control logic, and network protocols, while the Artix-7 fabric accelerates parallel algorithms and interfaces directly to external peripherals. This system-on-chip hierarchy combines an Arm Cortex-A9 processor, an FPGA, a programmable SoC, and a semiconductor into a single highly integrated architecture. The device provides 55K logic cells, a 766 MHz processor operating point, and 130 I/O according to the AMD device documentation and product listings. The CLG485 package contains 485 balls in a 19 mm by 19 mm CSPBGA configuration. Its integrated SoC architecture reduces the number of discrete devices needed when a design requires both deterministic programmable logic and a conventional processor runtime. The single Cortex-A9 core provides the software-processing side of the architecture, while the FPGA fabric supports parallel datapaths, protocol termination, custom accelerators, and time-critical I/O. CoreSight debug capabilities make the processor and programmable logic easier to bring up under a unified development flow. Exact memory-interface, transceiver, and configuration details should be selected from the complete AMD Zynq-7000 datasheet before schematic and PCB signoff. Typical uses include industrial IoT gateways, motor-control systems, embedded vision, industrial networking, test equipment, and low-power edge processors. In an embedded-vision controller, the processor can manage image transport and control software while FPGA fabric handles pixel pipelines or sensor interfaces. In communications equipment, programmable logic can implement custom packet handling while the processor runs network services and supervisory code. PCB design must account for the CSPBGA footprint, ball assignment, power rails, decoupling, configuration storage, and high-speed routing requirements. Follow the AMD package placement, pinout, and design-guideline documents exactly; validate differential pairs and length matching in the target stack-up. Commercial availability and lead time should be confirmed through the Request a Quote form on this page. This product summary combines the verified AMD and distributor device identification with practical guidance on FPGA/SoC partitioning, package constraints, and design qualification. It is intended to accelerate component selection while keeping critical PCB and electrical decisions tied to AMD's authoritative package and datasheet documentation.

RFQ צור קשר
XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD
XC7Z014S-1CLG400C

XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD

The AMD XC7Z014S-1CLG400C is a Zynq-7000 Artix-7 system-on-chip combining a single ARM Cortex-A9 MPCore processor with CoreSight, 65K logic cells, and FPGA fabric in a 400-ball CSPBGA package measuring 17 x 17 mm. It operates at 667 MHz and integrates programmable hardware acceleration with ARM-based software processing on one device. A Zynq system-on-chip is an adaptive SoC that bridges the ARM Cortex-A9 embedded-processing hierarchy and the programmable-logic hierarchy of an FPGA. The processor system runs operating-system and control software, while the Artix-7 fabric implements parallel data paths, hardware accelerators, interfaces, and real-time signal processing. This combination can reduce component count and data-transfer overhead in connected embedded systems. The principal device resources include 65K logic cells, a 667 MHz single-core ARM Cortex-A9 MPCore configuration, and CoreSight debug capability. The 400-CSPBGA package provides a compact 17 x 17 mm surface-mount solution for advanced embedded platforms. Connectivity described for the Zynq-7000 family includes CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI interfaces. The -1 speed designation identifies the -1 performance grade, while CLG400 denotes the 400-ball package configuration and C identifies the commercial-temperature option. Design work therefore requires checking the complete device ordering information, bank voltages, package ball assignments, supported memory interfaces, and exposed-pad requirements in the AMD Zynq-7000 documentation before schematic and PCB release. Typical uses include industrial vision, networked control, embedded analytics, communications equipment, sensor processing, and compact edge-computing systems. The processor can manage control-plane software and networking, while the FPGA fabric can execute parallel filtering, image processing, protocol handling, or other latency-sensitive operations. This separation of sequential and parallel workloads is the central architectural benefit of the Zynq-7000 family. A robust design should assign power, ground, and high-speed memory pins according to the official package guidance and keep sensitive interfaces away from noisy switching paths. Designers should also verify Vivado device support, tool-version compatibility, clocking requirements, and exposed-pad thermal implementation for the selected board stack-up. This page combines device identification, package and resource details, drop-in ordering variants, application guidance, and engineering-oriented comparisons. It is intended to accelerate initial device selection while directing final engineering decisions to the manufacturer data sheet, package pinout files, and UG865 package guidance.

RFQ צור קשר
XC7Z014S-1CLG400I - 65K Zynq SoC FPGA | AMD
XC7Z014S-1CLG400I

XC7Z014S-1CLG400I - 65K Zynq SoC FPGA | AMD

AMD XC7Z014S-1CLG400I is a Zynq-7000S system-on-chip FPGA with 65K logic cells, a single Arm Cortex-A9 MPCore processor operating at 667 MHz, and CoreSight debug support in a 400-CSPBGA package measuring 17 x 17 mm. The device combines programmable Artix-7 FPGA logic with an embedded processor system and connectivity including CAN bus, Ethernet, I2C, SPI, UART/USART, USB OTG, and memory interfaces. A Zynq-7000S SoC FPGA is a heterogeneous programmable-logic device that integrates an Arm processor system with FPGA fabric, programmable I/O, memory controllers, and serial peripherals. This combination places software-controlled processing and hardware-parallel logic in one package, supporting the FPGA & CPLD category within the broader integrated-circuit and semiconductor hierarchy. Unlike a discrete processor and FPGA combination, the integrated architecture can reduce inter-device communication and board complexity. The device provides 65K logic cells and a 667 MHz processor clock in the XC7Z014S configuration. Its connectivity options support industrial control, communications equipment, embedded vision, networking appliances, and data-processing systems. CoreSight provides integrated debug visibility for processor and system development. The CLG400 package offers 400 ball contacts and is intended for surface-mount PCB assembly rather than through-hole installation. The target combines a single Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, allowing Linux-capable or bare-metal software workloads to cooperate with dedicated hardware pipelines. Programmable logic can handle parallel interfaces, real-time filtering, protocol acceleration, or sensor aggregation, while the processor manages control flow, operating systems, networking stacks, and supervisory functions. Design engineers should still verify interface timing, memory-device compatibility, pin constraints, and Vivado target support against the AMD data sheet DS187 and package-pinout files. Typical uses include industrial gateways, motor-control and automation platforms, embedded camera and vision systems, communications infrastructure, and data-acquisition equipment. The processor handles configuration and higher-level control, while FPGA logic accelerates fixed-function operations. Connectivity such as Ethernet, CAN bus, USB OTG, UART/USART, SPI, and I2C allows the SoC to interface with sensors, transceivers, memory, and service interfaces without relying exclusively on discrete peripheral devices. The principal design consideration is migration discipline. A device with the same CLG400 package does not automatically qualify as a drop-in replacement because FPGA resources, processor configuration, temperature grade, and exposed interfaces can differ. Confirm the exact ordering code, review the package pinout, regenerate the Vivado constraints, and repeat timing and hardware validation before substituting any alternative into a deployed board. This page combines the XC7Z014S-1CLG400I core specifications with package details, practical application guidance, and explicit migration checks for CLG400 candidates. It is intended to help engineers identify the correct Zynq-7000S configuration, verify pin and resource compatibility, and plan firmware, FPGA-image, and PCB validation before a replacement decision.

RFQ צור קשר
XC7Z014S-1CLG484C - 667MHz Zynq-7000 SoC | AMD
XC7Z014S-1CLG484C

XC7Z014S-1CLG484C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z014S-1CLG484C is a Zynq-7000 adaptive system-on-chip combining a single Arm Cortex-A9 MPCore processor running at 667 MHz with CoreSight debug support and 65K Artix-7 FPGA logic cells in a 484-CSPBGA package measuring 19 mm by 19 mm. The device supports 200 I/O, providing a combination of software programmability and FPGA-based hardware acceleration in one package. A Zynq-7000 SoC is an adaptive SoC in the FPGA and embedded-processing hierarchy. Unlike a conventional microprocessor or standalone FPGA, it integrates an ARM-based processing system with programmable logic, dedicated peripherals, memory interfaces, and high-speed I/O. This architecture allows software to control the operating environment while designers implement parallel data paths, protocol handling, signal processing, or hardware accelerators directly in the FPGA fabric. The most prominent product characteristics are the 667 MHz Cortex-A9 processor, 65K logic cells, and 484-CSPBGA package. The single-core processor supports software-oriented control tasks, while the programmable logic provides deterministic parallel operations without a separate FPGA. CoreSight support adds integrated visibility for development and debugging. The package also carries a stated 200 I/O, reducing the need for external interface expansion in designs that use many board-level connections. The CLG484 implementation uses a 0.8 mm ball-grid pitch and a 19 mm by 19 mm body, making high-density escape routing and multilayer PCB construction important engineering considerations. Although the physical package is compact relative to its processing and logic resources, power delivery, decoupling, DDR routing, and thermal management remain substantial layout tasks. Device configuration, software startup, and Vivado-based hardware implementation form a unified development flow around the SoC. Typical uses include industrial control gateways, networked embedded systems, video and image processing, communications equipment, data-acquisition systems, and compact edge-computing platforms. In each case, the ARM processor can manage operating-system-level functions while FPGA logic accelerates streaming data, implements custom interfaces, or performs time-critical processing. The combination can reduce board partitioning compared with a design that uses a separate microprocessor and FPGA. A critical layout consideration is the 0.8 mm BGA pitch. Use the AMD package-pinout resources and the manufacturer's PCB design guidance when assigning power, ground, memory, and high-speed interfaces. Maintain the shortest practical return path for each power rail, provide local high-frequency decoupling at supply pins, and verify the complete stack-up against the selected DDR interface and signal-integrity constraints. This page combines the exact device identity, package details, source-backed specifications, validated replacement considerations, comparison parameters, and implementation guidance needed to evaluate the XC7Z014S-1CLG484C for a new adaptive-SoC design.

RFQ צור קשר
XC7Z014S-1CLG484I - 667MHz Zynq-7000 SoC | AMD | 65K Logic Cells
XC7Z014S-1CLG484I

XC7Z014S-1CLG484I - 667MHz Zynq-7000 SoC | AMD | 65K Logic Cells

The AMD XC7Z014S-1CLG484I is a Zynq-7000 heterogeneous system-on-chip integrating one ARM Cortex-A9 MPCore processor with 65K Artix-7 FPGA logic cells. It operates at 667 MHz and is packaged in a 484-CSPBGA measuring 19 x 19 mm. A programmable system-on-chip combines a hard processor subsystem with programmable logic in one silicon device. The Zynq-7000 hierarchy places the ARM Cortex-A9 processing system above the SoC level, while the Artix-7 programmable logic provides parallel hardware, fixed-function interfaces, and customizable data-processing paths. This combination permits software-controlled Linux or real-time workloads to coexist with deterministic logic implemented beside the processor. The defining features of the XC7Z014S include one ARM Cortex-A9 core, a 667 MHz processor rating, and 65K FPGA logic cells. Its CLG484 ball-grid-array package supports dense board-level integration without requiring separate processor and FPGA packages. CoreSight debug visibility, programmable-logic resources, and fixed hard blocks allow hardware-assisted acceleration, control, networking, and signal-processing systems to share one device. Technically, the device combines a hardwired ARM Cortex-A9 processing subsystem with an FPGA fabric instead of implementing the processor in programmable logic. This architectural separation simplifies software execution and allows suitable control functions to run in the processor while latency-sensitive or parallel operations run in the programmable logic. Exact processor memory, I/O, transceiver, power, and timing limits must be selected from the complete AMD Zynq-7000 data sheet before schematic or timing signoff. Typical uses include industrial control gateways, machine-vision systems, communications equipment, embedded data acquisition, and compact edge-computing platforms. The programmable logic can accelerate filtering, protocol handling, or interface conversion while the processor manages application software, networking, and configuration. The same architecture also suits camera, surveillance, and networking equipment requiring deterministic hardware alongside a general-purpose processor. PCB design should follow the AMD package pinout files, power-sequencing requirements, decoupling recommendations, and high-speed routing guidance. Keep the processor and memory power domains properly conditioned, provide high-quality decoupling at supply pins, and route memory and programmable-logic interfaces with continuous reference planes. Bank-voltage and configuration requirements must also be checked against the selected board architecture. This product record combines the manufacturer data-sheet entry, package information, ordering-code details, compatible family members, and practical implementation guidance. It supports faster evaluation of processor performance, logic capacity, package footprint, software support, and PCB migration while keeping procurement requests and technical validation connected to one concise engineering reference.

RFQ צור קשר
XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD
XC7Z014S-2CLG400E

XC7Z014S-2CLG400E - 65K Logic Cell Zynq-7000 SoC | AMD

The AMD XC7Z014S-2CLG400E is a single-core Arm Cortex-A9 MPCore processor with CoreSight system-on-chip containing 65K Artix-7 FPGA logic cells, operating at 766 MHz, and housed in a 400-CSPBGA package measuring 17 x 17 mm. It combines programmable logic with a hard processor subsystem, DDR memory interfaces, high-speed serial connectivity, and general-purpose I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip that combines an Arm Cortex-A9 processing subsystem with a 7-series FPGA fabric. The processor executes operating systems and application software, while the programmable logic accelerates parallel data processing, controls external interfaces, or implements custom hardware. This integration reduces the number of devices and interconnects required compared with a separate microprocessor and FPGA. The XC7Z014S includes 65K logic cells and a 766 MHz single-core Cortex-A9 MPCore with CoreSight debug support. Its 400-CSPBGA package provides 200 I/O according to the manufacturer product description. The integrated architecture supports designs requiring deterministic programmable-logic timing alongside conventional processor-based control, networking, data acquisition, and user-interface functions. The -2 speed designation identifies the device performance grade, while CLG400 identifies the 400-ball CSPBGA package and the trailing E identifies the specified temperature or product grade. Because FPGA configuration, DDR routing, power delivery, and high-speed differential pairs are tightly coupled, replacement decisions must include both the exact speed suffix and the complete package designation rather than relying only on the Zynq family name. Typical uses include industrial control, communications equipment, embedded vision, test and measurement, audio processing, and embedded servers. The processor side supports conventional software workflows, while the Artix-7 fabric can implement parallel data paths, custom peripherals, high-speed interfaces, or hardware accelerators. The integrated CoreSight facilities also assist design validation and software-oriented debugging. Layout must follow the AMD Zynq-7000 Package Device Pinout Files and the package-specific power, decoupling, and differential-pair guidance. Preserve the assigned power and ground balls, provide the specified voltage rails, route memory and high-speed interfaces with controlled impedance, and use the exposed thermal and assembly requirements defined for the 17 x 17 mm CSPBGA. Validate the complete Vivado design against the exact device and package before fabrication. This page combines the manufacturer specifications, verified device descriptions, package details, practical PCB guidance, and same-footprint upgrade or replacement options for engineers evaluating the XC7Z014S-2CLG400E as a programmable SoC platform.

RFQ צור קשר
XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD
XC7Z014S-2CLG400I

XC7Z014S-2CLG400I - 766MHz 65K Logic Zynq SoC | AMD

The AMD XC7Z014S-2CLG400I is a Zynq-7000S system-on-chip with one Arm Cortex-A9 MPCore processor, approximately 65,000 FPGA logic cells, a 766 MHz processor operating frequency, and a 400-CSPBGA package measuring 17 x 17 mm. The -2 speed designation and I temperature suffix identify the industrial-grade ordering configuration. A Zynq-7000S system-on-chip belongs to the programmable SoC hierarchy, combining an Arm Cortex-A9 application processor with an FPGA fabric in one device. This integration permits software-controlled operating-system execution and hardware-level parallelism in the same package. The resulting platform is well suited to embedded systems that need flexible I/O, real-time data processing, programmable logic, and software extensibility without using separate processor and FPGA packages. The device provides approximately 65K logic cells and a 766 MHz Arm Cortex-A9 MPCore configuration. The 400-CSPBGA package supports a dense PCB footprint while exposing the device's processor, programmable logic, memory interfaces, and high-speed I/O. Its integrated architecture can shorten signal paths between software-controlled processing and parallel hardware pipelines, reducing inter-component communication overhead in applications such as industrial control, data acquisition, communications, and embedded vision. Programmable logic implements deterministic datapaths, protocol handling, filtering, and interface conversion, while the Cortex-A9 processor executes operating-system software, network stacks, control functions, and user applications. Designers can partition a workload between these resources instead of assigning every operation to software or fixed-function hardware. This mixed implementation model provides flexibility during prototyping and can improve throughput when parallel operations are better suited to FPGA fabric. Typical applications include industrial monitoring equipment, programmable test systems, motor and motion control, embedded communications gateways, camera and image-processing front ends, and sensor-fusion platforms. The processor side can manage configuration, control flow, and external networking, while the programmable logic side accelerates sampling, buffering, filtering, and fixed-format data conversion. The integration is especially useful when deterministic data movement and concurrent software tasks are both required. PCB design must account for the BGA-400 land pattern, power-plane requirements, decoupling, high-speed routing, and thermal management. Follow the AMD package pinout files and Zynq-7000 design guidance when assigning power, ground, clock, memory, and peripheral signals. Validate the completed board for signal integrity and thermal performance before production. This page combines the device architecture, ordering information, package details, verified drop-in candidates, comparison criteria, and practical implementation guidance to support component selection, PCB planning, firmware integration, and hardware acceleration for Zynq-7000S embedded designs.

RFQ צור קשר
XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD
XC7Z014S-2CLG484E

XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD

The AMD Xilinx XC7Z014S-2CLG484E is a Zynq-7000 system-on-chip FPGA with 65,000 logic cells, a single-core Arm Cortex-A9 processor operating at 766 MHz, and 256 KB of on-chip RAM. The device is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. It combines programmable logic, a hard processor subsystem, CoreSight debug support, and integrated memory into one heterogeneous processing platform. A Zynq-7000 SoC is an FPGA and SoC in the same silicon device. Its Arm Cortex-A9 processing subsystem executes operating systems, networking stacks, control software, and application code, while the Artix-7 FPGA fabric implements parallel datapaths, custom accelerators, protocol engines, and time-critical logic. This programmable-logic-plus-processor hierarchy places the device between conventional FPGAs, microcontrollers, and dedicated application-specific processors. The XC7Z014S offers 65,000 programmable logic cells for hardware customization, along with 766 MHz Arm Cortex-A9 performance and 256 KB of on-chip RAM. The -2 speed designation identifies the device performance grade, while the E suffix identifies its temperature grade. Its 484-pin CSPBGA package exposes the processing, programmable-logic, memory, power, ground, configuration, and general-purpose I/O resources required for a high-pin-count module design. The heterogeneous architecture allows software to control the system while programmable logic handles deterministic data acquisition, filtering, waveform generation, video processing, or interface bridging. Pin multiplexing must be planned carefully because many hard I/O functions can be assigned to programmable I/O through the design toolchain. Power sequencing, bank-specific supply requirements, decoupling, configuration boot, and high-speed memory implementation are central PCB-design considerations for this device. Typical uses include industrial automation and factory control, industrial Ethernet equipment, camera and image-processing systems, communications infrastructure, edge-computing gateways, instrumentation, and embedded vision. The Cortex-A9 subsystem handles network protocols and control logic, while the FPGA fabric can execute parallel algorithms such as filtering, packet inspection, data acquisition, and hardware-assisted image processing without relying solely on the processor. A robust design should follow the AMD Zynq-7000 power, decoupling, configuration, and package-layout guidance. Use the recommended regulator topology for each supply bank, preserve the specified startup sequence, and validate high-speed interfaces with controlled impedance routing. Consider processor-resource and logic-resource utilization together because software placement, memory bandwidth, and hard I/O selection can determine whether the design fits the selected XC7Z014S device. This product record combines package, processor, logic-capacity, memory, pinout-resource, comparison, sourcing, and implementation guidance in one engineering-focused reference. It also distinguishes speed-grade and temperature-grade alternatives that use the same CLG484 footprint, helping designers evaluate replacement options without overlooking migration constraints.

RFQ צור קשר
XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD
XC7Z014S-2CLG484I

XC7Z014S-2CLG484I - 65K Zynq SoC with Cortex-A9 | AMD

The AMD XC7Z014S-2CLG484I is a Zynq-7000 SoC FPGA integrating a single ARM Cortex-A9 MPCore processing system with CoreSight debug support and 65K Artix-7 programmable logic cells. The device operates at 766 MHz and is packaged in a 484-CSPBGA measuring 19 mm by 19 mm. It combines a hard processor, programmable logic, memory controllers, and connectivity interfaces in one mixed-signal system-on-chip package. A Zynq SoC is a system-on-chip that combines an ARM processing system with FPGA programmable logic. Its product hierarchy runs from FPGA and SoC to adaptive SoC and embedded processing. The processing system executes operating systems and control software, while the programmable logic implements parallel data paths, hardware accelerators, custom interfaces, and time-critical signal processing. This division allows one device to consolidate functions that might otherwise require a separate microcontroller and FPGA. The XC7Z014S uses a 28 nm process and provides 200 I/O according to the product listing. Its single Cortex-A9 processor includes the Cortex-A9 MPCore architecture and CoreSight debugging, while the Artix-7 logic fabric provides 65K logic cells. The -2 speed designation corresponds to the listed 766 MHz processor operating point. Its CLG484 package also supports DDR memory interfaces and other programmable-logic I/O needed by embedded control, communications, and industrial systems. The integrated architecture permits hardware acceleration without a separate FPGA-to-SoC interconnect. Parallel functions can execute in programmable logic while the ARM core manages control flow, operating systems, or network protocols. This can reduce board area and latency, although firmware, Vivado implementation, hardware/software partitioning, DDR layout, and clocking must be designed as one coherent system. Pin assignments and power sequencing should follow the AMD Zynq-7000 package documentation and pinout files. Typical uses include industrial machine control, factory automation, networked embedded controllers, sensor and vision preprocessing, communications gateways, and test equipment. The Cortex-A9 side is appropriate for Linux or RTOS-based supervisory control, while programmable logic can accelerate data acquisition, protocol conversion, motor-control algorithms, or custom video and communications pipelines. The 200-I/O count supports integration of DDR, transceivers, control signals, and external memory. Power planning is central to a 484-CSPBGA design. The processor, programmable logic, and high-speed memory interfaces can create substantial dynamic and thermal loads even though the part is not a conventional linear power device. Use the AMD data sheet for recommended rails, sequencing, decoupling, and operating limits. Place bypass capacitors at the supply pins, route power and ground planes carefully, and provide thermal copper around the BGA while avoiding via stubs in sensitive nets. This page combines the manufacturer data-sheet link, exact device specifications, package details, practical Zynq design guidance, and clearly qualified same-package alternatives. It also distinguishes speed and temperature-grade options so engineers can identify a potential hardware replacement without mistaking it for a complete system-level equivalence.

RFQ צור קשר
XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD
XC7Z015-1CL485I

XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD

The AMD XC7Z015-1CL485I is a Zynq-7000 system-on-chip FPGA combining a dual-core Arm Cortex-A9 processor with 74K Artix-7 FPGA logic cells in a 484-CSPBGA package operating at 667 MHz. It integrates programmable logic, dual-core Arm processing, memory interfaces, and high-speed connectivity for embedded control, industrial automation, communications, and edge-processing systems. The verified distributor description identifies the device as a system-on-chip with dual Arm Cortex-A9 MPCore and CoreSight technology. A Zynq-7000 SoC FPGA is more than a conventional FPGA: it combines a hard processor subsystem with programmable logic in one device. This heterogeneous architecture allows software tasks to run on the Arm processor while dedicated hardware accelerates parallel logic, interface, signal-processing, or control functions. The XC7Z015-1CL485I belongs to the Zynq-7000 family and is identified by the 74K logic-cell configuration. Key verified characteristics include dual Arm Cortex-A9 MPCore processing, CoreSight debug support, 74K FPGA logic cells, 667 MHz operation, and a 484-CSPBGA package measuring 19 x 19 mm. These attributes make the part suitable for embedded systems that need both sequential software execution and programmable hardware. Its integrated architecture can reduce external component count compared with separate processor and FPGA implementations. The device is supplied under the exact ordering code XC7Z015-1CL485I. The verified distributor records show product availability, pricing, inventory, and SoC FPGA descriptions, while the exact electrical limits, temperature ratings, memory interfaces, I/O standards, and power characteristics are not provided in the supplied data. Engineers should therefore verify the complete manufacturer datasheet and package pinout before finalizing a design. Typical applications include industrial factory control, network-connected embedded systems, camera and image-processing front ends, robotics, communications equipment, and low-power edge computing. The processor subsystem is suitable for control software, networking stacks, and operating-system support, while the programmable fabric handles parallel datapaths, interfaces, or accelerators. A critical design consideration is the dense BGA package and its many power, ground, and high-speed pins. PCB layout, decoupling, bank voltage planning, signal integrity, and thermal management must be developed against the official package information. This page summarizes verified distributor information and identifies parameters requiring manufacturer-data confirmation before release to fabrication. This page combines exact distributor metadata, application guidance, package considerations, and sourcing information intended to help engineers evaluate XC7Z015-1CL485I efficiently while avoiding unsupported technical assumptions.

RFQ צור קשר
XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD
XC7Z015-1CLG485C

XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD

The AMD XC7Z015-1CLG485C is a Zynq-7000 adaptive SoC combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 485-CSPBGA package. It operates at 667 MHz, provides 74K FPGA logic cells, and integrates 130 PS I/O with 150 programmable FPGA I/O. The device is designed for embedded systems that require programmable hardware acceleration alongside a coherent Arm-based software environment. A Zynq-7000 adaptive SoC is a heterogeneous system-on-chip that places an Arm processor system and FPGA fabric in one package. The processor subsystem supports Linux and standalone applications, while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and time-critical control logic. This integration reduces interconnects between the processor and programmable logic compared with a two-chip architecture while preserving the flexibility of FPGA-based hardware. The XC7Z015 combines two Arm Cortex-A9 MPCore processors with CoreSight debug support and 74K Artix-7 logic cells. Its 667 MHz processor rating supports operating-system-based control, communications management, and application processing. The 150 FPGA I/O expand interface options for external memory, networking, industrial interfaces, image acquisition, and embedded peripherals. The integrated processor, memory interfaces, fabric, and I/O make the device suitable for compact embedded platforms where board area and system integration are priorities. The CLG485 package uses a 19 mm by 19 mm CSP-BGA format and places 485 signal or power positions beneath the device. A 1.05 V supply rating is identified for the processor core, although the complete power architecture requires multiple rails and strict sequencing. The commercial-grade part is specified from 0°C to 85°C, making it appropriate for temperature-controlled industrial, communications, instrumentation, and test equipment rather than uncased automotive or extreme-temperature installations. Typical applications include industrial control gateways, machine vision, communications infrastructure, test and measurement systems, embedded servers, and network appliances. In each case, the processor can run control-plane software while FPGA logic accelerates data movement, protocol handling, filtering, encryption, or sensor acquisition. The heterogeneous architecture is especially useful when deterministic parallel behavior and conventional operating-system support are both required. Design work should begin with the AMD Zynq-7000 technical reference material and the CLG485 package placement diagram. Confirm every power rail, decoupling requirement, configuration interface, memory topology, and pin multiplexing decision against the manufacturer documentation. The 19 mm by 19 mm BGA also requires careful escape-routing planning, inspection access, and substrate-aware thermal design. This product page consolidates the confirmed device identity, package information, operating limits, engineering use cases, compatible device variants, and selection considerations into one design-oriented reference for engineers evaluating the XC7Z015-1CLG485C.

RFQ צור קשר
XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD
XC7Z015-1CLG485I

XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD

The AMD XC7Z015-1CLG485I is a Zynq-7000 Artix-7 FPGA system on chip with two 667MHz ARM Cortex-A9 MPCore processors, CoreSight debug capability, 74K logic cells, and a 485-CSPBGA package measuring 19 mm by 19 mm. It combines programmable FPGA fabric with a dedicated dual-core processing system in one device. A Zynq-7000 SoC is an FPGA and programmable system-on-chip architecture that integrates FPGA logic with a hard-processor subsystem. The FPGA fabric supports parallel hardware processing, while the ARM Cortex-A9 subsystem supports operating systems, networking, control functions, and application software. This hierarchy places the XC7Z015 within the FPGA and SoC family and makes it useful where designers need both software flexibility and hardware-level performance. The principal device characteristics are two Cortex-A9 MPCore processors operating at 667MHz, 74K FPGA logic cells, CoreSight debug support, and a 485-CSPBGA package. The -1 speed designation identifies the device performance grade, while CLG485 identifies the 485-ball package. Industrial-temperature and extended-temperature behavior should be confirmed against the exact ordering code and AMD documentation before deployment. Architecturally, the XC7Z015 separates processor-side and programmable-logic functions while allowing designers to exchange information through high-bandwidth interfaces. Parallel accelerator logic can execute filtering, encryption, video processing, or interface conversion at deterministic rates, while the processor subsystem controls data flow and operating-system functions. CoreSight provides integrated visibility for processor-based debugging and trace-oriented development workflows. Typical uses include industrial machine vision, networked industrial control, communications equipment, high-performance embedded processing, and FPGA-assisted data acquisition. The dual-core processor configuration can support partitioning between an operating system and control tasks, while the 74K logic cells can accelerate parallel datapaths without requiring a separate FPGA. Software-defined controls, protocol conversion, and sensor fusion are additional suitable workloads. Board design requires careful attention to the 19 mm by 19 mm BGA escape routing, power sequencing, decoupling, and thermal performance. Use AMD package files and the Zynq-7000 package pinout resources when assigning power, ground, high-speed memory, and I/O pins. Differential and high-speed interfaces should be routed with controlled impedance and verified against the relevant Zynq-7000 guidance. This product page combines exact catalog identifiers, device architecture, package details, qualification alternatives, comparison data, and implementation guidance. It also organizes replacement and selection questions around the constraints that determine whether a candidate is genuinely usable on the same PCB.

RFQ צור קשר
XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD
XC7Z015-2CL485I

XC7Z015-2CL485I - Zynq-7000 SoC, Dual Cortex-A9, 74K Logic Cells | AMD

The AMD XC7Z015-2CL485I is a Zynq-7000 All Programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug and 74K Artix-7 FPGA logic cells, housed in a 484-pin CSPBGA (19x19 mm) package. According to AMD/Xilinx product pages, the device runs at up to 766 MHz on the application processor side and combines hard-core peripherals (DDR controller, USB, Gigabit Ethernet, SD/SDIO, CAN, SPI, I2C, UART) with 74K logic cells, 46,200 LUTs and ~3.5 Mb of block RAM in the programmable logic. The XC7Z015-2CL485I is part of the Z-7015 speed/temperature family (industrial, 766 MHz). It targets embedded designs that need deterministic ARM processing alongside custom RTL acceleration, without external CPU + FPGA partitioning. An SoC (System on Chip) is an integrated circuit that consolidates a microprocessor, memory, peripherals, and often programmable logic into a single die. In the Zynq-7000 family the terminology hierarchy is: SoC > All-Programmable SoC > ARM + FPGA heterogeneous device > Zynq-7000 series > Zynq-7015 sub-family. The 7000S class in the same generation uses a single-core Cortex-A9, whereas Z-7015/7030/7045/7100 parts are dual-core; the XC7Z015 sits at the low end of the dual-core Zynq-7000 family with 74K logic cells, while the XC7Z030/045/100 scale up to 125K-444K cells. Key features include a hard DDR3/DDR3L memory controller with ECC support, two ARM Cortex-A9 cores with NEON extensions and Floating Point Unit, and 95 user I/O pins (the constraint in the 484-CSPBGA package). Programmable logic resources include 74K logic cells (Artix-7 fabric), ~3.5 Mb of block RAM, and 220 DSP slices. Built-in peripherals include two Gigabit Ethernet MACs, two USB 2.0 OTG ports, two CAN 2.0B controllers, two I2C, two SPI, two UART, two SD/SDIO, and GPIO. The 484-CSPBGA (19x19 mm) industrial-grade package supports operation from -40C to +100C and uses a Cavity-Lead BGA construction with flip-chip silicon for improved thermal performance. A common design pitfall is the chip-density distinction: -2 is the standard speed grade while -3 is the high-performance grade. Both share identical pinout and may co-exist on the same PCB; some logic timing paths fail closure at -2 that succeed at -3, so designs targeting the Zynq PS at 766 MHz must be validated against the -2 timing model. Power architecture typically uses a TPS6508640 or similar PMIC and decoupling must follow UG585/Z-7015 placement diagrams. Typical applications include industrial motor control (Bldc/FOC with ARM and DSP slices), machine vision smart cameras (Cortex-A9 + image pipeline in fabric), IoT edge gateways with deterministic ARM software + custom interfaces, Software Defined Radio (data pipes to RF ADCs/DACs), automotive driver assistance, and avionics/industrial control. The wide temperature range plus integrated PCIe Gen2 makes it ideal for ruggedized designs. When designing with this SoC, allocate PS peripherals carefully because the 7015 has fewer PL-side HP/HR ports than larger Zynq parts; the 484-CSPBGA constrains MIO/EMIO usage. Verify fabric timing against your synthesis results at the -2 speed grade even if a -1 (which the 7015 does not offer) prototype is treated as the target. Plan thermal dissipation: industrial -40C to +100C operation requires the CSPBGA thermal pad to be soldered to a PCB thermal via array per AMD application notes. This page synthesizes distributor pricing (LCSC, DigiKey, Avnet), drop-in alternatives from the same Xilinx Z-7015 family (so designers can pick the right speed/temperature bin), and practical design guidance that goes beyond the manufacturer's datasheet summary.

RFQ צור קשר
XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD
XC7Z015-2CLG485E

XC7Z015-2CLG485E - Dual ARM Cortex-A9 Zynq-7000 SoC, 74K Logic Cells | AMD

The AMD XC7Z015-2CLG485E is a Zynq-7000 heterogeneous system-on-chip that fuses a dual-core ARM Cortex-A9 MPCore processing system running at up to 766 MHz with an Artix-7 class FPGA fabric of 74K logic cells, supplied in a 485-CSPBGA package measuring 19 x 19 mm. The -2 suffix denotes the -2 speed grade, and the trailing E identifies the extended commercial temperature option of the XC7Z015 device family. A Zynq-7000 SoC sits in the hierarchy above a discrete microcontroller and above a discrete FPGA: it is a programmable logic device (FPGA and CPLD family) that integrates a hardwired application processor, so one silicon die carries both a software-execution environment and fabric-level parallel logic. AMD positions this combination for designs that need deterministic hardware acceleration alongside a familiar Linux or bare-metal software stack, without the two-chip power, area and inter-chip latency penalty of a processor-plus-FPGA design. Key device features include two hard ARM Cortex-A9 cores with CoreSight debug support, a 74K-logic-cell FPGA fabric, integrated DDR memory controllers, and a high-speed serial transceiver capability typical of the mid-density Zynq members. The device is offered in the 485-ball chip-scale BGA package designated CLG485, a 19 x 19 mm surface-mount ball grid array with a 0.8 mm ball pitch that supports high-density PCB escape routing and multilayer board construction. Technically, the device separates the programmable system (PS) from the programmable logic (PL) domains so that each can be optimized independently: the PS runs hard real-time control code and operating-system tasks, while the PL side handles pixel pipelines, protocol framing, sensor capture, DSP blocks and high-speed I/O that would starve a software-only processor. The Artix-7 fabric in this member is the smallest of the Zynq-7000 dual-core options, which keeps dynamic power and board cost low relative to the larger XC7Z020 and XC7Z030 members. Typical uses include industrial machine-vision and inspection cameras, industrial protocol gateways, video capture and encode nodes, medical imaging peripherals, secure boot and encryption appliances, and industrial Ethernet or storage controllers where fabric logic handles wire-speed framing and the CPU manages the control plane. When laying out the board, treat the CLG485 package as a full ball-grid escape problem: follow the AMD Zynq-7000 package pinout and PCB guidelines, provide the documented core supply rails with decoupling close to the balls, and keep high-speed transceiver and memory routing on properly referenced layers to preserve signal integrity and margin on the -2 speed grade. This page consolidates distributor availability, drop-in variant matching, package and speed-grade comparisons, and board-level design guidance that the manufacturer data sheet alone does not present in a directly usable, side-by-side form.

RFQ צור קשר
XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD
XC7Z015-2CLG485I

XC7Z015-2CLG485I - Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z015-2CLG485I is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 MPCore processing system with CoreSight debug technology and 74K FPGA logic cells. The processor operates at 766 MHz, and the device is housed in a 485-CSPBGA package measuring 19 x 19 mm. Its integrated architecture combines programmable logic, ARM processors, memory interfaces, connectivity, and debug functions in one silicon device. A Zynq-7000 SoC is a heterogeneous computing device that bridges the ARM Cortex-A9 microcontroller domain and the FPGA logic domain. Unlike a conventional FPGA, it executes software on its integrated processor while accelerating data-intensive tasks in parallel programmable logic. The XC7Z015 combines the Arm Cortex-A9 platform with Artix-7-class FPGA resources, making it suitable when a design needs flexible hardware parallelism without a separate processor and FPGA. The headline resources include two Arm Cortex-A9 processor cores, a 766 MHz operating frequency, CoreSight debug support, and 74K logic cells. The device also supports 1.5 V, 2 V, and 2.5 V power domains. This combination allows control software, communication protocols, and user-defined datapaths to share one package while maintaining deterministic hardware interfaces between the processor system and programmable logic. The -2 ordering designation identifies the performance grade of this XC7Z015 device, while the CLG485 suffix identifies the 485-ball chip-scale BGA package. AMD documents the XC7Z015-CLG485 package placement separately, including pin locations and device-specific assignments. Engineers should use the AMD package-pinout files and UG865 package information when assigning PCB balls and power rails. Typical uses include industrial image processing, embedded vision, programmable networking, high-speed data acquisition, and control systems requiring both a real-time processor and FPGA acceleration. The ARM side is appropriate for operating systems, networking stacks, and application-level control, while programmable logic can implement parallel algorithms, custom interfaces, or low-latency signal chains. These functions can exchange data through dedicated interfaces inside the SoC rather than through external component-to-component buses. Board design must account for the 485-CSPBGA escape-routing requirement, multiple supply rails, decoupling, and thermal performance of a compact 19 x 19 mm package. Use the pin-description and package-placement documentation during schematic capture, then cross-check every ball against the selected design tools. Confirm the required Vivado device support, memory interface topology, and board-level power sequencing before releasing the PCB layout. This product overview combines the exact resource and package details for the XC7Z015-2CLG485I with practical guidance for FPGA-assisted embedded processing. It also organizes same-package speed and temperature alternatives, selection criteria, and design cautions so engineers can evaluate the device against the exact requirements of a Zynq-7000 implementation.

RFQ צור קשר
XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD
XC7Z015-3CLG485E

XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD

The AMD XC7Z015-3CLG485E is a Zynq-7000 system on chip integrating a dual-core Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, 74K logic cells, and an 866 MHz processor operating point in a 485-CSPBGA package measuring 19 x 19 mm. The device combines programmable logic, hard real-time processing, and CoreSight debug support in one package. A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic. Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems. The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release. Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination. Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.

RFQ צור קשר
XC7Z015-L1CLG485I - Dual-Core 667MHz Zynq SoC | AMD
XC7Z015-L1CLG485I

XC7Z015-L1CLG485I - Dual-Core 667MHz Zynq SoC | AMD

AMD XC7Z015-L1CLG485I is a Zynq-7000 Artix-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processing system at 667 MHz, CoreSight debug capability, and 74K programmable logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. The device integrates the processing system and programmable logic into one 28 nm silicon solution for embedded control, industrial automation, communications, and data-processing systems. A Zynq system-on-chip is an FPGA and SoC architecture that combines a hard processor system with programmable logic in one package. Within the semiconductor hierarchy, it belongs to the FPGA and SoC class, while the ARM Cortex-A9 portion operates as a general-purpose processing system and the 74K-cell portion provides hardware-accelerated programmable logic. This integration reduces component count and allows software-controlled algorithms to be implemented in parallel hardware. The target device uses two ARM Cortex-A9 cores operating at 667 MHz and includes CoreSight technology for debug and trace visibility. Its programmable logic section contains 74K logic cells and is based on the Artix-7 FPGA family. The combination supports Linux or RTOS-based software, high-speed memory interfaces, general-purpose I/O, and custom datapaths without requiring a separate FPGA. The Zynq-7000 SoC architecture separates the processing system, commonly called the PS, from the programmable logic, commonly called the PL. The PS provides the ARM Cortex-A9 computation platform, while the PL can implement fixed or reconfigurable hardware such as interfaces, accelerators, filters, or protocol engines. AMD describes the integration as a 28 nm Xilinx programmable-logic implementation combined with a feature-rich dual-core ARM Cortex-A9 processing system. Typical uses include industrial machine vision, factory automation, communications infrastructure, embedded data acquisition, network equipment, and test systems. A programmable image-processing pipeline can run in the PL while the ARM cores manage control software, operating-system tasks, and external communication. The 485-CSPBGA package also supports compact designs requiring many high-density board connections. PCB design requires careful BGA escape routing, uninterrupted supply planes, decoupling near the device, and controlled-length interfaces to attached memory and transceiver components. Because the package contains both a processor system and programmable logic, firmware, programmable logic, DDR memory connectivity, and pin multiplexing must be planned together. Use the AMD package placement and pinout files to assign every BGA position correctly. This product page combines the manufacturer package information with verified distributor records, family-level alternatives, application guidance, and practical design notes. It is intended to help engineers evaluate the XC7Z015-L1CLG485I for a new Zynq-7000 design or identify a compatible family member before beginning PCB layout.

RFQ צור קשר
XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD
XC7Z020-1CLG400C

XC7Z020-1CLG400C - 667MHz ARM Cortex-A9 SoC | AMD

The AMD XC7Z020-1CLG400C is a Zynq-7000 programmable SoC integrating a dual-core ARM Cortex-A9 MPCore processing system with CoreSight debug support and 85K Artix-7 FPGA logic cells. The device operates at 667 MHz and is packaged in a 400-ball chip-scale BGA measuring 17 mm by 17 mm. This combination places programmable logic, hard processor cores, memory interfaces, and high-speed I/O in one device. A Zynq-7000 SoC is a heterogeneous system-on-chip, combining an application processor subsystem with programmable FPGA fabric. The ARM Cortex-A9 subsystem executes operating-system-level software, while the Artix-7 fabric accelerates parallel algorithms, implements custom peripherals, or handles high-throughput data movement. This system-on-chip hierarchy differs from a conventional microcontroller because substantial programmable logic is integrated alongside the processor. Key device attributes include two ARM Cortex-A9 cores, a 667 MHz processor rating, 85K logic cells, and a 400-CSPBGA package. The programmable logic allows hardware designers to implement parallel image processing, interface bridging, protocol termination, or custom accelerators while the processor subsystem handles control software and operating-system tasks. CoreSight support provides integrated visibility for hardware-assisted debugging and trace-based development. The XC7Z020 belongs to the Zynq-7000 family, which combines an ARM Cortex-A9-based processing system with Xilinx 7-series FPGA fabric. The -1 suffix identifies the performance grade, CLG400 identifies the 400-ball package, and C identifies the commercial temperature option. Package-level integration reduces the number of interconnects compared with a separate processor and FPGA, but it also requires careful power, decoupling, and escape-routing work because the BGA uses a dense ball pitch and exposes many dedicated pins. Typical uses include industrial vision, edge video processing, programmable industrial control, communications infrastructure, and embedded systems requiring deterministic parallel processing. In these applications, software running on the Cortex-A9 cores can coordinate system behavior while FPGA logic concurrently processes image data, manages high-speed links, or accelerates repetitive computations. The 667 MHz processor and 85K logic cells provide a balanced platform for control-heavy systems with parallel hardware tasks. The principal design consideration is power planning. Every power rail must satisfy its specified voltage, sequencing, and current limits, while the CLG400 package requires careful via-in-pad or via-beneath-pad arrangements where the board design permits them. Use the AMD package pinout files and Zynq-7000 datasheet to assign every ball, bank voltage, decoupling capacitor, and configuration signal before layout release. This product page combines the exact device identity, package information, processor and logic-cell ratings, strict drop-in alternatives, application guidance, and engineering-focused design notes. It also distinguishes exact replacement options from larger or differently packaged Zynq devices that would require design changes.

RFQ צור קשר
XC7Z020-1CLG400CES Dual Cortex-A9 Zynq SoC | AMD
XC7Z020-1CLG400CES

XC7Z020-1CLG400CES Dual Cortex-A9 Zynq SoC | AMD

AMD XC7Z020-1CLG400CES is a programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processor with CoreSight debug support and an Artix-7 FPGA fabric. The device provides 85K logic cells, operates at 667 MHz according to its distributor product listing, and is packaged in a 400-CSPBGA package measuring 17 x 17 mm. Its architecture integrates hard real-time processing, programmable logic, high-speed serial connectivity, and memory interfaces in one device. A Zynq-7000 SoC is an adaptive SoC that places an Arm Cortex-A9 application processor and Xilinx FPGA fabric on the same silicon. This device class extends beyond a conventional microcontroller or stand-alone FPGA: software executes in the processor domain, while programmable logic handles parallel data acquisition, control, interface bridging, and hardware acceleration. The resulting hierarchy is Zynq SoC, adaptive SoC, FPGA and CPLD, programmable logic, processor-based embedded system, and semiconductor. Key device characteristics include two Cortex-A9 cores, 85K FPGA logic cells, 667 MHz processor performance, and a 400-CSPBGA package. The processor domain supports a conventional software-development flow, while the programmable-logic domain supports high-throughput parallel datapaths. CoreSight provides integrated debug visibility, while the FPGA fabric allows designers to partition an application among software, dedicated processors, and programmable logic. The main technical benefit is reduced system integration compared with separate processor and FPGA designs. Software-controlled logic can accelerate tasks such as data formatting, packet handling, sensor acquisition, and interface conversion. The integrated architecture also reduces board-level interconnects between the processor and programmable logic. Migration between the XC7Z020, XC7Z010, and related Zynq-7000 devices requires reviewing memory, pinout, power, and device-specific constraints rather than assuming interchangeability. Typical applications include industrial control gateways, camera and machine-vision systems, communications equipment, embedded data acquisition, network appliances, and test systems. In each case, the Cortex-A9 cores can run operating-system-level software while the Artix-7 fabric handles parallel interfaces or accelerates data movement. The exact processor memory capacities, I/O counts, power rails, and signal parameters must be selected from the manufacturer data sheet for the complete device family. PCB implementation requires careful treatment of the 400-ball BGA, multiple power and ground domains, high-speed memory routing, and decoupling. Use the manufacturer package pinout files and the CLG400 footprint when assigning ball assignments; do not infer the 400-ball pinout solely from the package dimensions. Validate power sequencing, voltage thresholds, decoupling values, and high-speed layout against the relevant Zynq-7000 implementation guidance. This page consolidates the exact device identity, package information, lifecycle position, comparison points, and application-oriented design guidance for engineers evaluating XC7Z020-1CLG400CES replacements or planning a CLG400-based Zynq-7000 PCB.

RFQ צור קשר
XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD
XC7Z020-1CLG400I

XC7Z020-1CLG400I - Dual-Core Cortex-A9 SoC FPGA | AMD

The AMD XC7Z020-1CLG400I is a programmable system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric, 85K logic cells, and a 667 MHz processor clock in a 400-CSPBGA package measuring 17 x 17 mm. The device also includes CoreSight debug and observation resources. This combination integrates hard-processor and programmable-logic functions on one package, making the XC7Z020 suitable for embedded control, data processing, industrial automation, communications, and test systems. A Zynq-7000 SoC is a heterogeneous embedded computing device that combines an Arm Cortex-A9 application processing unit with an FPGA fabric. The processor executes operating-system and application software, while the programmable logic implements parallel data paths, custom interfaces, accelerators, and signal-processing functions. This product hierarchy places the XC7Z020 at the intersection of embedded processors, FPGA and CPLD devices, and application-specific programmable SoCs. The principal device attributes include dual Arm Cortex-A9 processor cores, 85K FPGA logic cells, a stated 667 MHz Cortex-A9 operating frequency, CoreSight capabilities, and a 400-CSPBGA package. The integrated architecture allows software-controlled systems to place time-critical or highly parallel operations in FPGA logic while retaining conventional program flow in the processor subsystem. Pin-compatible ordering options within the CLG400 family can support different speed, temperature, or power configurations when the device qualification and operating requirements are compatible. The processor-based portion provides an Arm-based execution environment for control software, networking stacks, and embedded applications. The FPGA portion provides programmable combinational and sequential logic alongside fixed I/O resources, allowing designers to implement custom peripherals, data acquisition paths, protocol accelerators, or high-throughput parallel processing. Because both domains share the package and system fabric, interconnect between software and programmable logic can be established according to the AMD Zynq architecture and supported interfaces. Typical implementations include industrial programmable logic controllers, factory monitoring gateways, camera and image-processing modules, medical instrumentation, industrial networking equipment, and embedded test platforms. In these systems, the Cortex-A9 cores can manage protocols and supervisory functions while FPGA logic accelerates sampling, filtering, encoding, or interface handling. The CLG400 package is particularly relevant to dense embedded designs where a large pin count, compact 17 x 17 mm body, and mixed processor-logic implementation are required. PCB implementation requires careful allocation of power, ground, high-speed memory, and configurable I/O resources. Follow the AMD package pinout files and XC7Z020 data sheet for the exact CLG400 ball assignments, recommended power sequencing, decoupling, and differential-pair routing. Confirm the selected board configuration, memory interface implementation, and peripheral assignments with the complete Vivado design before fabrication. This product page combines the identifiable processor, FPGA, package, and sourcing characteristics of the XC7Z020-1CLG400I with package-focused alternatives, engineering design notes, and a parameter comparison intended to accelerate component selection and board-level planning.

RFQ צור קשר
XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD
XC7Z020-1CLG484C

XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD

The AMD XC7Z020-1CLG484C is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 484-CSPBGA package. The device provides 85,000 logic cells, operates at 667 MHz, and integrates CoreSight debug capabilities into a single 19 mm by 19 mm package. This combination allows software-controlled processing and programmable hardware acceleration to share one device. A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories. The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications. The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing. Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution. PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout. This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.

RFQ צור קשר
XC7Z020-1CLG484CES - 85K Logic Cell Zynq SoC | AMD
XC7Z020-1CLG484CES

XC7Z020-1CLG484CES - 85K Logic Cell Zynq SoC | AMD

The AMD XC7Z020-1CLG484CES is a Zynq-7000 Artix-7 system-on-chip with 85K logic cells, a dual-core ARM Cortex-A9 MPCore processor operating up to 667 MHz, CoreSight debug support, and 256 KB of on-chip memory. It is supplied in a 484-ball CSPBGA package measuring 19 mm by 19 mm. The device combines programmable logic with an embedded application processor and programmable real-time I/O in one integrated silicon platform. A Zynq system-on-chip is a heterogeneous embedded platform that combines an ARM microprocessor system with an FPGA fabric, memory controllers, and high-speed programmable I/O. It belongs to the FPGA and CPLD category while also functioning as a processor-based SoC. This architecture allows hardware acceleration, parallel control, interface adaptation, and software-controlled application processing to share one package and interconnect. The target MPN provides 85K logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debugging in the CLG484 package. Its integrated processor supports programmable real-time I/O alongside the FPGA fabric, making the device useful for demanding control systems rather than simple fixed-function logic. The CLG484 package offers substantially more balls than smaller Zynq packages, supporting a broader set of programmable I/O and power connections. The Zynq-7000 architecture separates the processing system from the programmable logic while allowing shared access to DDR memory and peripherals. This separation supports hard real-time control tasks in hardware while the ARM processor handles operating systems, networking, data processing, and user applications. Exact resource counts, memory capacity, voltage requirements, and package dimensions beyond those identified for this device should be confirmed in AMD data sheet DS187 before final design release. Typical uses include industrial Ethernet gateways, machine vision, industrial automation, embedded networking, camera processing, communications equipment, and test systems. The 667 MHz dual-core processor provides useful control bandwidth, while 85K logic cells allow parallel datapaths, protocol bridges, and hardware accelerators to be implemented alongside software. In a camera system, for example, programmable logic can perform image pre-processing before the ARM subsystem handles network management or higher-level analysis. PCB implementation requires careful treatment of the 484-ball BGA footprint, power sequencing, decoupling, and high-speed routing. Confirm the complete ball map, voltage rails, and differential I/O constraints from the AMD package pinout files and DS187. Treat the processor, memory interface, and programmable I/O requirements as separate design domains so each rail, reference plane, and high-speed route is validated for its intended signal class. This product summary combines the verified device identity, package information, processor configuration, and architectural role with engineering guidance for evaluating the XC7Z020-1CLG484CES in embedded FPGA, industrial, networking, and machine-vision systems. It also distinguishes the device from speed- and temperature-code variants while preserving the strict CLG484 footprint requirement for drop-in comparisons.

RFQ צור קשר
XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx
XC7Z020-1CLG484I

XC7Z020-1CLG484I - Zynq-7000 SoC 667MHz Dual ARM Cortex-A9 | AMD/Xilinx

The AMD/Xilinx XC7Z020-1CLG484I is a Zynq-7000 All Programmable System-on-Chip (AP SoC) that integrates a dual-core ARM Cortex-A9 MPCore processing system with 667MHz core clock, together with Artix-7 programmable logic of 85K logic cells, all housed in a 484-ball CSBGA (CLG484) package measuring 19x19 mm. It is the -1 speed grade, industrial temperature range variant of the XC7Z020 family. A SoC FPGA such as the Zynq-7000 is a single silicon device that fuses a hard processor subsystem (HSS) and a soft FPGA fabric. The processor subsystem runs software (Linux, RTOS, bare-metal), while the programmable logic provides hardware acceleration, custom I/O, and parallel data-path extensions. Zynq-7000 devices sit within the broader taxonomy of heterogeneous compute devices, alongside MPSoC and Versal Adaptive SoC families from AMD/Xilinx. This hybrid architecture is ideal for embedded systems that require both deterministic real-time control and high-throughput data processing. Key features include dual ARM Cortex-A9 cores with NEON SIMD and single/double precision FPU, on-chip L1 caches (32 KB I-cache, 32 KB D-cache per core) and 512 KB L2 cache, integrated Memory Controller for DDR3/DDR3L/LPDDR2, dual USB 2.0 OTG, dual Gigabit Ethernet MACs, dual SD/SDIO controllers, and 2x UART, 2x SPI, 2x I2C peripheral interfaces. The integrated Artix-7 FPGA fabric includes 85K logic cells, 4.9 Mb block RAM, and 220 DSP slices. The Zynq-7000 architecture uses a tightly coupled AXI interconnect between the PS and PL, allowing hardware-accelerated peripherals to communicate with the processor at high bandwidth with predictable latency. The CLG484 package exposes multiple high-performance (HP) and high-range (HR) I/O banks for DDR interfacing and general-purpose I/O. Typical applications include industrial motor drives, machine vision, software-defined radio, ADAS driver assistance systems, medical imaging, and embedded vision. The wide temperature range and -1 speed grade make the XC7Z020-1CLG484I well suited for industrial control and factory automation. When designing with this device, careful attention must be paid to PCB layout, power-rail sequencing, and DDR signal integrity. Use Vivado Design Suite and Vitis for hardware/software co-design, and refer to the official Zynq-7000 datasheet (DS187) and PCB design guide (UG933). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $45.94 במלאי