AMD

XC7Z020-1CLG484C - 667MHz Zynq-7000 SoC FPGA | AMD

MPN: XC7Z020-1CLG484C ✓ פעיל
484-CSPBGA, 19 mm x 19 mm Package 667 MHz Speed
כמות הזמנה מינימלית: 1 |

XC7Z020-1CLG484C סקירה

The AMD XC7Z020-1CLG484C is a Zynq-7000 heterogeneous system-on-chip combining a dual-core Arm Cortex-A9 processor with an Artix-7 FPGA fabric in a 484-CSPBGA package. The device provides 85,000 logic cells, operates at 667 MHz, and integrates CoreSight debug capabilities into a single 19 mm by 19 mm package. This combination allows software-controlled processing and programmable hardware acceleration to share one device.

A Zynq-7000 SoC is a programmable logic device that incorporates a hard processor subsystem with an FPGA fabric. The processor subsystem provides Arm Cortex-A9 software execution, while the Artix-7 fabric implements parallel data paths, custom interfaces, accelerators, and real-time control logic. In the system hierarchy, the XC7Z020 belongs to the SoC, FPGA and CPLD, embedded processor, and programmable logic device categories.

The XC7Z020-1CLG484C includes two Arm Cortex-A9 processor cores, CoreSight debugging, 85,000 FPGA logic cells, and a stated operating frequency of 667 MHz. Its integrated architecture reduces the number of interconnects between the processor and programmable logic compared with a separate microcontroller-plus-FPGA design. The CLG484 package also supports memory interfaces, general-purpose I/O, configuration resources, and dedicated clock resources for embedded applications.

The key engineering benefit is deterministic hardware/software partitioning. Software running on the Cortex-A9 subsystem can control system tasks, while the FPGA fabric can execute parallel algorithms at hardware speed. This architecture is useful when a design requires flexible interfaces, substantial control logic, or dedicated acceleration without the component count of a two-chip solution. Exact memory width, I/O count, power figures, and temperature limits depend on the selected device configuration and are not stated in the product listing.

Typical applications include industrial vision, networked control systems, embedded data acquisition, communications equipment, sensor processing, and test-and-measurement instruments. The dual-core processor is suitable for supervisory software, networking stacks, or control loops, while the FPGA fabric can implement interfaces and data-processing pipelines that benefit from parallel execution.

PCB design should follow the AMD CLG484 package and pinout files because the 484-ball BGA requires careful escape-routing, via-in-pad or through-via planning, and adequate power and ground distribution. Confirm the power rails, decoupling requirements, configuration interface, memory topology, and exposed thermal requirements against the manufacturer documentation before releasing the layout.

This product record combines the exact orderable MPN, package information, logic-cell count, processor architecture, operating frequency, and pin-compatible Zynq-7000 alternatives. It also adds application guidance and PCB considerations that help engineers evaluate the device beyond a basic catalog listing.

חלופות תחליף ישיר עבור XC7Z020-1CLG484C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם XC7Z020-1CLG484C (אותו גורם צורה וטביעת רגל) — שונים ב Package, Speed Grade, Mounting Type, Logic Cells, FPGA Family.

Intel
Package: 484-UBGA (UBGAmobile, 19x19 mm)
Speed Grade: -7 (standard)
Mounting Type: Surface Mount (BGA)
השווה עם XC7Z020-1CLG484C →
Altera
Package: 484-UBGA (19x19 mm)
Speed Grade: 8
Mounting Type: Surface Mount (BGA)
השווה עם XC7Z020-1CLG484C →
AMD
Package: 484-ball CSBGA (CLG484) 19x19 mm
Speed Grade: -1
Mounting Type: Surface Mount (BGA)
השווה עם XC7Z020-1CLG484C →
AMD
Package: 484-CSPBGA
Speed Grade: 2
השווה עם XC7Z020-1CLG484C →
AMD
Package: 484-CSPBGA (19x19 mm)
Speed Grade: -2
Mounting Type: Surface Mount
השווה עם XC7Z020-1CLG484C →
AMD
Package: 484-CSPBGA
Speed Grade: -3
Mounting Type: Surface-mount BGA
השווה עם XC7Z020-1CLG484C →

XC7Z020-1CLG484I

✅ Drop-In
AMD
📦 484-CSPBGA (CLG484)
Zynq-7000 All Programmable SoC · XC7Z020 · -1 · Dual ARM Cortex-A9 MPCore · 667 MHz · Artix-7 · 85K · 4.9 Mb

✓ במלאי

$45.9375 / יחידה

הצג גיליון נתונים ←

XC7Z020-2CLG484I

✅ Drop-In
AMD
📦 484-CSPBGA (CLG484)
Dual ARM Cortex-A9 MPCore with CoreSight · 766 MHz · Zynq-7000 (Artix-7 class fabric) · 85,000 · 53,200 · 106,400 · 220 · 4.9 Mb

✗ אזל מהמלאי

$49 / יחידה

הצג גיליון נתונים ←

XC7Z020-2CLG484ES

✅ Drop-In
📦 484-CSPBGA (CLG484)
Same 484-CSPBGA footprint; -2 speed grade raises frequency from 667 MHz to approximately 766 MHz, while ES changes the temperature qualification suffix

📋 חלופה להתייחסות (לא בקטלוג)

XC7Z020-2CLG484E

✅ Drop-In ⚠️ מפרטים לא מאומתים
AMD
📦 484-CSPBGA (CLG484)
Zynq-7000 Artix-7 FPGA system-on-chip · Dual-core ARM Cortex-A9 MPCore · 766 MHz · Artix-7 FPGA with 85K logic cells · CoreSight · Zynq-7000 · 2 · Extended

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7Z020-3CLG484E

✅ Drop-In
AMD
📦 484-CSPBGA (CLG484)
Zynq-7000 FPGA system-on-chip · 2 ARM Cortex-A9 cores · 866 MHz · Artix-7 · 85K logic cells · CoreSight · ARM Cortex-A9 MPCore · 484-CSPBGA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7Z020-1CLG484C דירוגים מרביים ומאפיינים חשמליים

Device Type Zynq-7000 application processor system-on-chip
Processor Cores 2 Arm Cortex-A9 cores
Processor Architecture ARMv7-A
CoreSight Support Integrated
FPGA Family Artix-7
Logic Cells 85,000 cells
Maximum Stated Frequency 667 MHz
מארז 484-CSPBGA, 19 mm x 19 mm
Ball Count 484 balls
סוג הרכבה Surface mount BGA
Programmable Logic Artix-7 FPGA fabric integrated with the application processor
Orderable Part Number XC7Z020-1CLG484C
סטטוס RoHS Compliant

מדריך תצורת פינים של XC7Z020-1CLG484C 484-cspbga, 19 mm x 19 mm

תצורת פינים עבור XC7Z020-1CLG484C (מארזת 484-cspbga, 19 mm x 19 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 484-cspbga, 19 mm x 19 mm עבור XC7Z020-1CLG484C

אין נתוני פריסת פינים מפורטים עבור XC7Z020-1CLG484C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XC7Z020-1CLG484C מתאים עבור 6 יישוםs: Industrial Vision Processing, Industrial Control Systems, Communications and Networked Equipment, Data Acquisition and Instrumentation, Sensor and Edge Processing, Aerospace and Defense Test Equipment.

🏭

Industrial Vision Processing

The XC7Z020-1CLG484C fits industrial vision systems that divide work between control software and parallel pixel processing. The two Arm Cortex-A9 cores can run camera control, communications, diagnostics, and higher-level machine logic, while the 85,000-cell Artix-7 FPGA fabric implements deterministic acquisition and filtering pipelines. Operating the processor and accelerator in one SoC reduces external chip-to-chip traffic compared with a separate processor and FPGA. The 667 MHz processor rating supports a clear partition between supervisory tasks and hardware pipelines, although image resolution, frame rate, external memory, and power limits must be evaluated before selecting the final configuration.

🏭

Industrial Control Systems

The XC7Z020-1CLG484C is suitable for industrial controllers requiring deterministic I/O handling alongside higher-level application software. Its dual Arm Cortex-A9 cores can execute motion sequencing, communications, diagnostics, and supervisory control, while the integrated FPGA fabric implements timing-critical state machines, signal conditioning, or fieldbus data paths. The single-package architecture also simplifies synchronization between software control and programmable hardware. Because the published 667 MHz figure describes the processor rather than every fabric timing path, designers must close timing for each implemented interface against the selected I/O standard and clocking scheme.

🌐

Communications and Networked Equipment

The XC7Z020-1CLG484C can divide communications processing between its Arm Cortex-A9 subsystem and FPGA fabric. Software can manage protocol stacks, configuration, telemetry, and network management, while programmable logic can accelerate packet handling, serialization, filtering, or custom physical-layer interfaces. This partitioning is valuable when a product must combine flexible protocol updates with deterministic throughput. The 85,000 available logic cells and 667 MHz processor rating provide a substantial mixed-signal implementation space, but board-level success depends on the selected memory architecture, external transceivers, clocking, and physical-layer standards.

🖥️

Data Acquisition and Instrumentation

The XC7Z020-1CLG484C supports instrument designs that combine sampling control, calibration, data analysis, and user interfaces. The FPGA fabric can implement parallel ADC or DAC channels, trigger logic, digital filtering, and timing control, while the Cortex-A9 cores handle calibration algorithms, memory management, networking, and instrument control. Partitioning acquisition logic into hardware reduces the burden placed on the sequential processor and allows deterministic sampling behavior. The exact converter count, supported memory, and achievable sample rates depend on the selected external components and I/O implementation rather than the processor frequency alone.

🧩

Sensor and Edge Processing

The XC7Z020-1CLG484C is appropriate for edge devices that preprocess sensor data before forwarding decisions to a host. The Artix-7 fabric can execute parallel filtering, feature extraction, thresholding, or sensor fusion, while the Cortex-A9 subsystem performs device management, protocol handling, and higher-level analytics. Co-locating these functions can reduce raw-data transfer and enable programmable products to adapt without changing the PCB. Deployment suitability still depends on the sensor interface, memory capacity, operating-temperature qualification, power budget, and the availability of FPGA resources for the chosen algorithms.

✈️

Aerospace and Defense Test Equipment

The XC7Z020-1CLG484C can support programmable test, monitoring, and signal-analysis equipment when its exact qualification, temperature grade, and export-control requirements are satisfied. The processor subsystem can manage test sequencing, calibration, storage, and communication, while the FPGA fabric handles deterministic pattern generation, capture, and real-time signal processing. The integrated SoC architecture permits flexible partitioning while limiting inter-device bandwidth requirements. Engineers should select the appropriate orderable suffix for the deployment environment and verify lifecycle, radiation, temperature, and security requirements rather than assuming that package compatibility establishes full qualification.

סיכום מוצרים מומלצים

XC7Z020-1CLG484I AMD בשימוש ב-: Industrial Vision Processing, Industrial Control Systems, Communications and Networked Equipment, Data Acquisition and Instrumentation, Sensor and Edge Processing XC7Z020-2CLG484I AMD בשימוש ב-: Industrial Vision Processing, Communications and Networked Equipment, Sensor and Edge Processing, Aerospace and Defense Test Equipment ZC702 Zynq-7000 evaluation-board platform using this SoC בשימוש ב-: Industrial Vision Processing, Communications and Networked Equipment XC7Z020-2CLG484ES Pin-compatible extended-temperature speed grade בשימוש ב-: Industrial Control Systems, Data Acquisition and Instrumentation, Aerospace and Defense Test Equipment XC7Z020-3CLG484E AMD בשימוש ב-: Aerospace and Defense Test Equipment
What are the key specifications of XC7Z020-1CLG484C that engineers should know?
The XC7Z020-1CLG484C integrates two Arm Cortex-A9 processor cores with an 85,000-logic-cell Artix-7 FPGA fabric and operates at 667 MHz. It also includes CoreSight debugging and uses a 484-CSPBGA package measuring 19 mm by 19 mm. According to the AMD manufacturer product description, the principal benefit is hardware/software partitioning in one programmable SoC, enabling sequential control software and parallel FPGA logic to operate within the same device.
What is the XC7Z020-1CLG484C used for?
The XC7Z020-1CLG484C is used for embedded systems that need both an Arm processor and programmable FPGA logic. Typical uses include industrial vision, communications, sensor acquisition, control systems, and data-acquisition equipment. Its two Cortex-A9 cores can run supervisory or real-time software, while the 85,000-cell Artix-7 fabric can implement parallel pipelines and custom interfaces. The AMD ZC702 evaluation-board documentation identifies this exact device as the SoC used on the ZC702 platform.
What is the difference between XC7Z020-1CLG484C and XC7Z020-1CLG484I?
The XC7Z020-1CLG484C and XC7Z020-1CLG484I use the same XC7Z020 device and 484-CSPBGA package, but their orderable temperature suffixes differ. The listed XC7Z020-1CLG484C is specified at 667 MHz, while the comparison material describes the XC7Z020-1CLG484I as having consistent terminal and package characteristics. Confirm the required industrial temperature range and ordering qualifications before substituting the I-grade device.
Is XC7Z020-1CLG484C the same as XC7Z020-2CLG484I?
No, they are pin-compatible but have different speed and temperature order codes. The XC7Z020-1CLG484C is listed at 667 MHz, whereas the XC7Z020-2CLG484I is described at 766 MHz, a 99 MHz or approximately 15 percent increase. Both use the CLG484 package, so the PCB footprint remains compatible, but timing closure, power planning, device qualification, and lifecycle requirements must be rechecked before replacement.
When should I choose XC7Z020-1CLG484C over XC7Z020-2CLG484I?
Choose the XC7Z020-1CLG484C when a design needs the 667 MHz device qualification and temperature grade, or when the original design has already been constrained around that exact orderable MPN. Choose the XC7Z020-2CLG484I when the design qualifies for the faster 766 MHz grade and benefits from additional timing margin. Both retain the 484-CSPBGA footprint, but speed-grade changes can alter timing closure and power behavior.
What is the best drop-in replacement for XC7Z020-1CLG484C?
The XC7Z020-1CLG484I is the closest listed drop-in candidate because it retains the XC7Z020 silicon, CLG484 package, 667 MHz speed grade, and matching 484-ball footprint. The XC7Z020-2CLG484I and XC7Z020-2CLG484ES are also package-compatible but represent higher speed grades and different temperature order codes. Treat any replacement as a qualification decision rather than a purely mechanical substitution.
What can replace XC7Z020-1CLG484C?
XC7Z020-1CLG484I can replace XC7Z020-1CLG484C when the required temperature grade and qualification conditions are acceptable. XC7Z020-2CLG484I and XC7Z020-2CLG484ES can also use the same CLG484 footprint, with their higher speed grades providing approximately 15 percent more nominal operating frequency. Before replacing the device, verify operating temperature, power, timing, configuration, and lifecycle requirements.
What is the best AMD equivalent for XC7Z020-1CLG484C?
The best AMD-family equivalent is the XC7Z020-1CLG484I because it preserves the same 667 MHz speed grade, XC7Z020 device family, and 484-CSPBGA footprint. Faster options include XC7Z020-2CLG484I at 766 MHz and XC7Z020-2CLG484ES. No different-manufacturer pin-compatible equivalent is established, and Zynq-7000 devices are only pin-compatible with other Zynq-7000 application processors in the same package.
Where can I download the XC7Z020-1CLG484C datasheet PDF?
The XC7Z020-1CLG484C datasheet and product resources are available through the AMD documentation ecosystem and the linked manufacturer-oriented datasheet page. For authoritative board work, use AMD's Zynq-7000 package-device pinout files and UG865 package information, together with the ZC702 evaluation-board user guide. Search for the exact MPN XC7Z020-1CLG484C to avoid accidentally selecting the different CLG400 package.
Where is the XC7Z020-1CLG484C pinout and package information?
The XC7Z020-1CLG484C pinout is defined in AMD's Zynq-7000 package-device pinout files for the CLG484 package. Use the CLG484 package file corresponding to XC7Z020 rather than a CLG400 file because the two packages do not share the same footprint. The AMD ZC702 evaluation-board user guide also provides board-level implementation context for this exact XC7Z020 device.
Is XC7Z020-1CLG484C suitable for industrial vision and embedded control?
Yes, the XC7Z020-1CLG484C is well suited to workloads combining embedded control with parallel hardware processing. Two Arm Cortex-A9 cores can handle operating-system software, communications, or supervisory control, while the 85,000-cell FPGA fabric can accelerate image pipelines or implement timing-sensitive interfaces. Confirm the device's temperature range, external memory design, and power budget against the manufacturer's documentation for the deployed environment.
Where can I buy XC7Z020-1CLG484C online?
Use the Request a Quote form on this page to request XC7Z020-1CLG484C availability, lot traceability, and a current quotation. The exact device is an AMD/Xilinx 484-CSPBGA Zynq-7000 SoC, so its order code must be quoted precisely, including the -1 speed grade, CLG484 package, and C temperature suffix. A quote request avoids confusion with CLG400 devices or other XC7Z020 order codes.
What is the price of XC7Z020-1CLG484C?
The current price of XC7Z020-1CLG484C is returned through the Request a Quote form on this page. Because availability and pricing can vary with quantity, inventory, date code, and traceability requirements, request a quote for the exact MPN and intended order quantity. Include any required lifecycle, date-code, or authorized-sourcing conditions in the request.
What is the lead time for XC7Z020-1CLG484C?
Request the current lead time for XC7Z020-1CLG484C through the Request a Quote form on this page. The orderable MPN must include the complete suffix, because XC7Z020 devices with different speed grades, packages, or temperature codes are not interchangeable. For production planning, also request factory allocation, date-code information, and any traceability documentation needed by your quality system.
Is XC7Z020-1CLG484C currently available and RoHS compliant?
The XC7Z020-1CLG484C is listed as available for quotation, and its component listing identifies it as RoHS compliant. Current allocation and delivery timing should be confirmed through the Request a Quote form on this page. The manufacturer also provides package pinout and ZC702 board documentation, which should be used to confirm that the CLG484 footprint and required electrical resources match the target design.

נתוני עזר הנדסיים עבור XC7Z020-1CLG484C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the XC7Z020-1CLG484C when the design has been qualified around the exact -1 speed grade and commercial-temperature C suffix. Select the XC7Z020-1CLG484I when the same 667 MHz performance is required in an industrial-temperature product; its footprint remains identical, but qualification and temperature behavior must be reviewed. The XC7Z020-2CLG484I is appropriate when a pin-compatible 766 MHz grade provides useful timing margin, although the faster device can change power and timing-closure requirements. Consider XC7Z020-2CLG484ES or XC7Z020-2CLG484E for extended-temperature requirements, and XC7Z020-3CLG484E only when the highest listed speed grade has been properly evaluated. In every case, confirm the complete orderable MPN, temperature range, timing, power, memory, configuration, and lifecycle requirements before approving a substitution.

השוואה עם חלופות

פרמטר מוצר זה XC7Z020-1CLG484I XC7Z020-2CLG484I XC7Z020-2CLG484ES XC7Z020-2CLG484E XC7Z020-3CLG484E
Brand AMD AMD AMD AMD AMD AMD
Package 484-CSPBGA (19 mm x 19 mm) 484-CSPBGA (CLG484) 484-CSPBGA (CLG484) 484-CSPBGA (CLG484) 484-CSPBGA (CLG484) 484-CSPBGA (CLG484)
Device Family Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000 Zynq-7000
Processor Cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores 2 Arm Cortex-A9 cores
Logic Cells 85,000 cells 85,000 cells 85,000 cells 85,000 cells 85,000 cells 85,000 cells
CoreSight Support Integrated Integrated Integrated Integrated Integrated Integrated
FPGA Fabric Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Temperature Qualification Commercial suffix C Industrial suffix I Industrial suffix I Extended-temperature suffix ES Extended-temperature suffix E Extended-temperature suffix E

מבדילים עיקריים

  • Matches the original speed grade while offering an industrial-temperature order code (לעומתXC7Z020-1CLG484I)
  • Higher speed grade remains mechanically compatible (לעומתXC7Z020-2CLG484I)
  • Extended-temperature alternatives preserve the established board footprint (לעומתXC7Z020-2CLG484ES)
  • Integrated processor and FPGA fabric consolidate two programmable roles (לעומתXC7Z020-3CLG484E)

הערות תכנון

Use AMD's XC7Z020 CLG484 package file as the authority for every ball assignment and escape route. The 484-CSPBGA occupies a 19 mm by 19 mm land pattern and requires substantially more routing discipline than a perimeter package. Place input/output devices near their assigned balls, use a uniform BGA escape strategy, and verify via placement against the manufacturer stack-up and drilling guidance before signal-path routing.

Partition the design into processor, memory, configuration, and programmable-I/O power domains, then follow the manufacturer rail definitions and decoupling guidance. Do not infer the required capacitor values or rail sequence from the 667 MHz processor frequency; processor state, DDR memory activity, and FPGA utilization can materially change current demand. Perform worst-case power estimation across processor load, memory access, and concurrent fabric activity before finalizing the supply design.

Create separate, continuously referenced return paths for high-speed memory and programmable-I/O interfaces, paying particular attention to crosstalk between memory buses and sensitive or high-speed fabric interfaces. Match clock and data routing according to the selected memory and transceiver requirements. AMD's package pinout files, UG865 package guidance, and the applicable board-design reference should be used to confirm ball groups, constraints, and approved escape-routing patterns.

Do not substitute XC7Z020 CLG400 devices for the CLG484 footprint, and do not assume that every speed or temperature suffix is qualification-equivalent. The -1, -2, and -3 order codes affect performance characteristics, while C, I, E, and ES suffixes identify different qualification classes. Before releasing a substitution, verify the exact orderable MPN, pin configuration, operating-temperature requirements, timing closure, power budget, and device lifecycle status.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The component listing identifies the XC7Z020-1CLG484C as RoHS compliant. Other compliance declarations and qualification attributes are not stated.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

xc7z020 1clg484c xc7z020 1clg484c datasheet xc7z020 datasheet xc7z020 1clg484i datasheet xc7z020 2clg484i datasheet xc7z020 1clg400i datasheet xc7z020 2clg400i datasheet xc7z020 1clg400c XC7Z020-1CLG484C pinout XC7Z020-1CLG484C equivalent XC7Z020-1CLG484C replacement XC7Z020-1CLG484C price XC7Z020-1CLG484C stock AMD XC7Z020-1CLG484C XC7Z020 484-CSPBGA application circuit

רכיבים ומונחים קשורים

AMD XC7Z020-1CLG484C XC7Z020-1CLG484I XC7Z020-2CLG484I XC7Z020-2CLG484ES XC7Z020-2CLG484E XC7Z020-3CLG484E Zynq-7000 Artix-7 Arm Cortex-A9 dual-core processor system-on-chip FPGA fabric programmable logic device embedded processor CoreSight CLG484 484-CSPBGA BGA package surface mount RoHS industrial vision data acquisition software-hardware partitioning 667 MHz
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר