XC7Z015-3CLG485E - Dual Cortex-A9 Zynq-7000 SoC | AMD
MPN: XC7Z015-3CLG485E ✓ פעילXC7Z015-3CLG485E סקירה
A Zynq-7000 SoC is a heterogeneous programmable system-on-chip. Its Arm Cortex-A9 processing system executes operating-system-level software, while the FPGA fabric supports parallel hardware acceleration, custom interfaces, and signal processing. The combination places software control and programmable logic on one device, reducing interconnects and allowing designers to partition workloads between general-purpose processors and dedicated hardware logic.
Key features include two Arm Cortex-A9 cores operating at 866 MHz, 74K FPGA logic cells, and 160 DSP resources. The processor subsystem uses a 32-bit RISC architecture and supports supply rails identified as 1.5 V, 2 V, and 2.5 V. CoreSight support provides integrated debug visibility, while the 485-CSPBGA package supports dense board-level integration for industrial, communications, embedded control, and signal-processing systems.
The device belongs to the Zynq-7000 product family, whose architecture unifies a dual-core Arm Cortex-A9 processing system with 7 Series FPGA logic. The XC7Z015 implementation offers 74K logic cells, placing it above smaller Zynq configurations in fabric capacity while retaining a processor-centric SoC architecture. The '-3' ordering code identifies the selected device speed grade, while 'E' identifies the associated product grade; the exact commercial and temperature details should be confirmed in the ordering guide before release.
Typical applications include industrial control systems, embedded vision, communications infrastructure, test equipment, and edge-processing platforms. In each case, the Cortex-A9 side can manage protocols, control flow, and applications, while FPGA logic can accelerate parallel algorithms or implement deterministic interfaces. The same partitioning model can also combine a real-time supervisory processor with hardware blocks for filtering, data movement, or protocol termination.
Board design should begin with the AMD Zynq-7000 package pinout files and the manufacturer power-supply, decoupling, and thermal guidance. The 19 x 19 mm BGA requires careful escape routing and inspection, and all three processor and I/O supply domains must be sequenced and decoupled as specified. Confirm design-tool support, memory-device compatibility, security configuration, and pin multiplexing in Vivado before schematic and layout sign-off.
חלופות תחליף ישיר עבור XC7Z015-3CLG485E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
XC7Z015-2CLG485E
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z015-2CLG485I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z015-1CLG485I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z015-1CLG485C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7Z015-L1CLG485I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7Z015-3CLG485E דירוגים מרביים ומאפיינים חשמליים
| Device Type | Zynq-7000 ARM Cortex-A9 system on chip with Artix-7 FPGA |
| Processor Cores | 2 Arm Cortex-A9 MPCore cores |
| Processor Clock | 866 MHz |
| FPGA Logic Cells | 74K logic cells |
| DSP Resources | 160 DSP slices |
| Processor Architecture | 32-bit RISC |
| Debug Support | CoreSight |
| Programmable Logic | Artix-7 FPGA fabric |
| Supply Rails | 1.5 V, 2 V, and 2.5 V |
| מארז | 485-CSPBGA, 19 x 19 mm |
| Package Pin Count | 485 pins |
| Technology | 28 nm |
| סטטוס מחזור חיים | Active |
| Product Family | Zynq-7000 |
| Series | Artix-7 FPGA with Cortex-A9 processor |
מדריך תצורת פינים של XC7Z015-3CLG485E 485 pins
תצורת פינים עבור XC7Z015-3CLG485E (מארזת 485 pins). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7Z015-3CLG485E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7Z015-3CLG485E מתאים עבור 6 יישוםs: Industrial Automation Controllers, Machine Vision and Edge Processing, Communications and Network Equipment, Test and Measurement Instruments, Embedded Control and HMI Platforms, Aerospace Ground Support Equipment.
Industrial Automation Controllers
The XC7Z015-3CLG485E fits industrial automation controllers that need a high-level operating system for sequencing and communications alongside deterministic hardware logic. Its dual Arm Cortex-A9 cores at 866 MHz can execute control software, diagnostics, and fieldbus tasks, while the 74K logic-cell Artix-7 fabric can implement timing-critical acquisition, pulse generation, or motor-control interfaces. The 160 DSP resources also allow selected signal-processing blocks to move from the processor into parallel hardware. For production use, confirm the required industrial temperature and product-grade suffix, then validate power sequencing, clocking, and thermal performance across the expected ambient range.
מומלץ
Machine Vision and Edge Processing
The XC7Z015-3CLG485E can divide machine-vision workloads between its Arm Cortex-A9 processing system and its Artix-7 FPGA fabric. The processors are suited to camera control, image transport, networking, and inference orchestration, while the 74K logic cells and 160 DSP slices can accelerate pixel formatting, filtering, thresholding, or frame-buffer operations. This hardware-software partitioning reduces external data movement compared with a processor-only implementation. The design must account for DDR memory bandwidth, external image-sensor interfaces, FPGA clock domains, and deterministic DDR timing before selecting the -3 grade over a lower-speed XC7Z015 variant.
מומלץ
Communications and Network Equipment
The XC7Z015-3CLG485E suits communications equipment requiring network software and high-throughput programmable logic in one device. Its dual 866 MHz Arm Cortex-A9 cores can handle protocol state, management, and control-plane tasks, while the FPGA fabric can implement packet classification, traffic shaping, serialization, or custom physical-layer functions. The 485-CSPBGA package provides dense integration for compact line-card and edge-network designs. Engineering teams should use the manufacturer pinout and memory-interface guidance to plan DDR connections, and should validate transceiver characteristics and timing margins independently of the processor speed grade.
מומלץ
Test and Measurement Instruments
The XC7Z015-3CLG485E is useful in programmable test and measurement equipment because it combines software sequencing with FPGA-based signal acquisition and generation. The Arm Cortex-A9 side can manage instrument control, analysis software, data storage, and user interfaces, while the 74K logic cells can implement parallel channels, counters, trigger logic, and digital pattern generation. The 160 DSP resources can accelerate selected filtering operations. A practical instrument design should define clocking, ADC and DAC interfaces, memory bandwidth, and FPGA timing before release, while using CoreSight for processor-level debug during bring-up.
מומלץ
Embedded Control and HMI Platforms
The XC7Z015-3CLG485E supports embedded human-machine interface platforms that combine responsive graphical control with low-latency hardware actions. The dual Arm Cortex-A9 processors at 866 MHz can run application software, networking, and user-interface tasks, while FPGA logic can handle display timing, touch capture, encoder inputs, or safety-related monitoring with predictable latency. Combining these functions in the 485-CSPBGA package reduces board area and external component count. Designers should establish the processor-to-FPGA AXI interface, DDR topology, and external peripheral ownership before schematic release to prevent resource contention during software execution.
מומלץ
Aerospace Ground Support Equipment
The XC7Z015-3CLG485E can be evaluated for aerospace ground-support and test systems where parallel logic acquisition must coexist with software-controlled diagnostics. The processor subsystem provides control and logging capability, while the FPGA fabric can implement deterministic interface sequencing, data capture, or redundant signal checks. Its 485-CSPBGA package supports compact integration into ground-based instrumentation. The device is not automatically qualified for airborne deployment; engineers must confirm ordering grade, environmental limits, radiation requirements, and applicable certification evidence. For ground equipment, thermal analysis should include processor, FPGA fabric, and memory activity under sustained workloads.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7Z015-3CLG485E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7Z015-2CLG485E | XC7Z015-2CLG485I | XC7Z015-1CLG485I | XC7Z015-1CLG485C | XC7Z015-L1CLG485I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) | 485-CSPBGA (19 x 19 mm) |
מבדילים עיקריים
- Higher processor speed grade within the XC7Z015 CLG485 family (לעומתXC7Z015-2CLG485E)
- Complete processor and programmable-logic integration (לעומתXC7Z015-1CLG485C)
- Substantial parallel DSP capacity alongside two processor cores (לעומתXC7Z015-1CLG485I)
- Industrial-ordering option available without changing the package (לעומתXC7Z015-1CLG485C)
הערות תכנון
Use the AMD Zynq-7000 package pinout files to construct the 485-CSPBGA footprint and escape-routing strategy. The package measures 19 x 19 mm and contains 485 pins, so use the manufacturer-defined land pattern rather than adapting a generic 484-ball or 256-ball BGA footprint. Preserve unobstructed access for X-ray or optical inspection, particularly beneath the device, and follow the package drawing for solder-mask and paste-aperture definitions.
Plan the 1.5 V, 2 V, and 2.5 V rails as separate domains and follow the manufacturer power-supply sequencing and decoupling requirements. Place the required bulk and high-frequency capacitors close to their associated supply and ground balls, with low-impedance planes connecting the power-distribution network. Validate startup, current transients, voltage tolerances, and simultaneous processor-plus-FPGA activity in the final power tree rather than relying on nominal rail values alone.
Estimated thermal planning should begin with the processor operating at 866 MHz and the FPGA fabric under the design's peak utilization; the final junction temperature depends on package construction, board copper, airflow, ambient temperature, and the selected speed grade. Use the manufacturer thermal data and Vivado power estimates to identify hot operating modes, then provide copper spreading beneath the BGA and verify the assembled board with thermal testing. Processor and fabric utilization can change power and temperature substantially.
Do not treat another XC7Z015 CLG485 suffix as an unconditional substitute. Speed-grade and ordering-grade changes can alter processor performance, temperature qualification, timing margin, and power behavior even when the PCB footprint is unchanged. After changing to XC7Z015-2CLG485E, XC7Z015-2CLG485I, XC7Z015-1CLG485I, XC7Z015-1CLG485C, or XC7Z015-L1CLG485I, rerun synthesis, implementation timing analysis, static timing closure, and resource-based power estimation.
Keep high-speed memory, clock, serial, and dedicated I/O routing over continuous reference planes, and observe the AMD guidance for each interface's length, matching, and return-path continuity. Separate noisy or switching circuitry from Cortex-A9 and CoreSight debug paths where practical. Since processor, DDR, and FPGA domains can operate concurrently, use synchronized clocks and explicit reset-release sequencing to prevent interface logic from starting before its supporting supplies are stable.
מידע על תאימות
Compliance status and ordering-grade limits must be confirmed in the current AMD/Xilinx product documentation and applicable material declarations.