מיקרו-בקרים

מוצרים (20,000+)

MC68HC000CEI16R - 16MHz 32-Bit M68K MPU | Freescale | 68-PLCC
MC68HC000CEI16R

MC68HC000CEI16R - 16MHz 32-Bit M68K MPU | Freescale | 68-PLCC

The Freescale (formerly Motorola, now NXP) MC68HC000CEI16R is a 32-bit reduced-power HCMOS implementation of the M68000 microprocessor family, clocked at 16 MHz and packaged in a 68-pin Plastic Leaded Chip Carrier (PLCC). The "EC000" silicon is the static, low-power variant of the original MC68000 and adds a fully static core that allows the clock to be stopped while preserving register state, making it well suited to low-power and battery-backed industrial designs. The device exposes the classic M68000 programming model with eight 32-bit data registers and eight 32-bit address registers, a 16-bit external data bus, and a 24-bit address bus capable of accessing 16 Mbytes of linear memory. A microprocessor (MPU) is the central control unit of an embedded computer system: it fetches instructions from memory, decodes them, and executes arithmetic, logic, and control operations that orchestrate peripherals and external hardware. The MC68HC000 belongs to the 32-bit CISC (Complex Instruction Set Computer) microprocessor hierarchy - within the broader semiconductor category it sits alongside RISC controllers (ARM, MIPS, RISC-V), DSPs, and microcontrollers (MCUs) that integrate memory and peripherals. CISC MPUs like the M68K family emphasize orthogonal addressing modes and a flat memory model that simplifies assembly programming and legacy code migration. Key features of the MC68HC000CEI16R include 16 MHz sustained operation from a single 5 V (or 3.3 V system) supply, 32-bit internal registers with a 16-bit external data path, a 24-bit address bus (16 Mbyte address space), seven user-programmable address space types, fully static operation for clock-stopped standby, and 56 maskable interrupt vectors. The static core is particularly valuable for handheld terminals, instrumentation, and standby/keep-alive subsystems where average power matters more than peak compute. Architecturally, the device combines a microcoded bus controller with a two-stage instruction pipeline, hidden bus arbitration through the Bus Grant and Bus Request signals, and a privileged/supervisor mode for protected operating systems. The die is manufactured in a 0.5 µm HCMOS process that delivers roughly 5 MIPS at 16 MHz - modest by modern standards but ample for legacy control loops, serial protocol bridging, and motor control. Typical applications include industrial PLCs, factory automation controllers, point-of-sale terminals, legacy aerospace ground equipment, and industrial protocol bridges. The M68K instruction set also makes it a popular drop-in upgrade for aging MC68000 systems that need a lower-power part without rewriting firmware. Design consideration: the 68-PLCC footprint is non-trivial and most modern designs prefer the QFP variant; verify tooling, programming voltage, and bus timing (DTACK, BR, BG) against the MC68HC000 family datasheet before retrofitting existing PCBs. A real-time clock and watchdog are not integrated - pair the MPU with an external supervisor if deterministic reset behavior is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
MC68HC000CRC8 - 8MHz 32-Bit M68k MPU PGA68 | NXP / Motorola
MC68HC000CRC8

MC68HC000CRC8 - 8MHz 32-Bit M68k MPU PGA68 | NXP / Motorola

The NXP / Motorola MC68HC000CRC8 is a static HCMOS 32-bit microprocessor in the M68000 family, running at 8 MHz and housed in a 68-pin ceramic/ceramic-PGA (CPGA-68, 26.92x26.92 mm) through-hole package. Marking suffix "CRC8" decodes as: C = ceramic package, RC = PGA pin-grid-array form factor, 8 = 8 MHz CPU clock. It implements the M68k instruction set and includes a low-power HCMOS implementation of the original MC68000, with 8 32-bit data registers and 8 32-bit address registers, full 32-bit internal data paths, and a 16-bit external data bus with 24-bit external address bus. A microprocessor (MPU) is the central processing unit of a computer system, executing instructions fetched from memory and orchestrating data movement between peripherals. The MC68HC000 belongs to the CISC (Complex Instruction Set Computer) microprocessor family, within the broader hierarchy of microcontrollers and microprocessors, then to processors and finally to digital semiconductors. Synonymous terms include CPU, central processor, and processor IC. As a member of the M68000 family of 16/32-bit processors, it sits alongside the original MC68000 (NMOS), the low-power MC68HC000 (HCMOS), the bus-compatible MC68HC001, and the reduced-pin-count MC68EC000. Key features include 8 MHz maximum CPU clock, 5 V single-supply operation, 32-bit internal architecture, 16-bit external data bus, 24-bit address space (16 MB), vectored interrupt controller supporting seven autovector levels plus 192 software vectors, and on-chip bus arbitration for systems with multiple bus masters. The HCMOS implementation cuts power consumption relative to the original NMOS MC68000 by roughly an order of magnitude while preserving object-code compatibility. Typical applications include legacy industrial controllers, educational single-board computers, retro-computing platforms, telecom switching hardware, and avionics upgrades. The wide software base (Unix-like systems, real-time executives, custom firmware) and broad support ecosystem keep the part relevant for long-life-cycle equipment. When designing with the MC68HC000CRC8, place bulk decoupling capacitors near each VCC/GND pair and provide clean 5 V power to ensure clock integrity; a slow rise on VCC can cause undefined CPU state at power-up, so a proper reset supervisor is recommended.

RFQ צור קשר
MC68HC000EI20 - 20MHz 32-Bit MPU, 68-PLCC | NXP / Freescale
MC68HC000EI20

MC68HC000EI20 - 20MHz 32-Bit MPU, 68-PLCC | NXP / Freescale

The NXP / Freescale MC68HC000EI20 is a 20 MHz 32-bit CISC microprocessor from the M68000 (EC000) family, packaged in a 68-pin PLCC (24.21 x 24.21 mm, J-lead) and rated for the 0C to +70C commercial temperature range. It integrates a 32-bit programming model with a 16-bit external data bus and a 24-bit address bus, delivering up to 16 MB of linear addressing and 8/16/32-bit operand support. The 'EI' suffix indicates an industrial/commercial grade plastic-leaded chip carrier variant. A microprocessor (MPU) is the central processing unit of a computer system, executing instruction fetch, decode, and execution cycles. The MC68HC000 belongs to the M68000 family hierarchy: MPU -> CISC microprocessor -> 32-bit processor -> complex instruction set computer -> integrated circuit. Compared with later RISC controllers, the M68K architecture emphasizes orthogonal register-to-register operations, a flat address space, and rich addressing modes, making it well suited to systems that benefit from legacy code reuse. Key features of the MC68HC000EI20 include a 20 MHz internal clock, 7.5 MIPS peak Dhrystone-class throughput, a low-power HCMOS process (the 'HC' in HC000), a 56-bit vectored interrupt structure with seven interrupt priority levels, and a synchronous bus interface with selectable 8- or 16-bit external data bus width. The HCMOS core delivers substantially lower power consumption than the original NMOS MC68000 while preserving full object-code compatibility with the M68000 instruction set. Typical applications include industrial automation controllers, legacy M68K embedded platforms, automotive telematics and body controllers (via the automotive-grade sister MC68HC000AEI series), point-of-sale terminals, networking line cards, and educational/prototyping boards. The PLCC-68 footprint and 5 V single-supply operation allow straightforward integration into legacy M68K system designs that were manufactured through the 1990s and early 2000s. When designing with this MPU, ensure the external clock source meets the 20 MHz specification with appropriate duty-cycle stability, and provide proper bus-termination for the 16-bit data bus to avoid signal-integrity issues at full speed. Designers migrating from the original NMOS MC68000 should evaluate the lower power dissipation and identical pinout of the HC000, which generally allows direct PCB reuse. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design considerations that complement the manufacturer datasheet and the broader M68000 family user manual.

RFQ צור קשר
MC68HC000IEI16 - 32-Bit 16MHz M68000 MPU, 68-PLCC | NXP
MC68HC000IEI16

MC68HC000IEI16 - 32-Bit 16MHz M68000 MPU, 68-PLCC | NXP

The NXP MC68HC000IEI16 is a 32-bit M68000 family microprocessor (MPU) running at 16 MHz, housed in a 68-pin PLCC package measuring 24.21 x 24.21 mm. It delivers full 32-bit internal data and address paths while keeping a 16-bit external data bus for system cost efficiency, making it a classic drop-in choice for legacy M68k designs and industrial control boards. A microprocessor (MPU) is the central processing unit of an embedded computer system, integrating an arithmetic logic unit, register file, and control logic into a single IC. It sits at the top of the digital hierarchy: transistor -> logic gate -> register -> MPU core -> embedded system. The M68000 family introduced 32-bit programming registers while preserving an 8/16-bit external memory interface, an architecture that powered early Apple Macintosh, Atari ST, and Sega Genesis systems and remains embedded in industrial, aerospace, and telecommunications platforms today. Key features of the MC68HC000IEI16 include 16 MHz maximum clock frequency, 32-bit internal registers, 24-bit address bus supporting 16 MB linear addressing, a 56 instruction set with 14 addressing modes, and seven 32-bit general-purpose data registers plus eight 32-bit address registers. Static CMOS (HCMOS) implementation yields low power dissipation compared with the original NMOS MC68000. Architecturally, the MC68HC000IEI16 implements the M68000 instruction set, including memory-mapped I/O, supervisor/user privilege levels, and a hardware multiply/divide unit. Its synchronous bus interface requires an external clock driver (e.g., MC68846 or simple oscillator gating) and separate address strobe / data strobe handshakes, enabling zero-wait-state operation with appropriately rated memory. Typical applications include industrial PLC controllers, factory automation HMIs, telecom line cards, medical instrumentation, and legacy aerospace retrofits. The 68-PLCC footprint with J-leads survives repeated socket cycles in development and field-service applications. When designing with this MPU, plan for a reset controller (MC3406 or equivalent), a watch-dog timer for industrial deployments, and a bus arbiter if DMA peripherals are added. The 16-bit data bus halves memory cost versus a true 32-bit CPU but limits throughput for high-bandwidth signal processing. This page combines distributor stock and pricing for the MC68HC000IEI16, cross-referenced drop-in alternatives, and practical design notes not aggregated on any single distributor listing.

RFQ צור קשר
MC68HC000IEI16R - 16MHz 32-bit M68K MPU, 68-PLCC | NXP
MC68HC000IEI16R

MC68HC000IEI16R - 16MHz 32-bit M68K MPU, 68-PLCC | NXP

The NXP Semiconductors MC68HC000IEI16R is a high-performance 32-bit HCMOS microprocessor (MPU) from the classic M68000 family, operating at 16 MHz and housed in a 68-pin PLCC (Plastic Leaded Chip Carrier) package measuring 24.21 mm x 24.21 mm. It integrates a single EC000 core with a 32-bit programming model and 16-bit external data bus, and is supplied by a single 5.0 V I/O rail. The 'IEI' suffix denotes the industrial operating temperature grade (-40C to +85C) while 'R' indicates tape-and-reel packaging, and the '16' speed grade sets the 16 MHz bus frequency. What is a 32-bit MPU/M68000 microprocessor? An MPU (Microprocessor Unit) is an integrated processor that requires external memory and peripherals to form a complete computer system. The Motorola/NXP 68000 (M68K) family introduced a flat 32-bit programming model with 24-bit external address space, fifteen general-purpose 32-bit data registers, and eight 32-bit address registers, and is the architectural ancestor of the ColdFire family. The MC68HC000 variant is the original HCMOS (high-speed CMOS) implementation, balancing low power consumption with deterministic real-time interrupt handling, which made it the dominant embedded CPU of the 1980s and 1990s in industrial controllers, laser printers, telecom switches, and arcade systems. Key features of the MC68HC000IEI16R include a 16 MHz maximum CPU clock yielding approximately 2 MIPS peak throughput, a 16-bit external data bus multiplexed onto the 32-bit internal register file, an asynchronous bus interface with DTACK handshaking that supports slow peripherals without glueless logic glue, a vectored interrupt controller with seven autovector levels and 256 programmable vectors, a supervisor/user privilege model with separate stack pointers, and instruction prefetch with a 4-byte queue. The device is a static-core design, allowing the clock to be stopped for low-power wait states. Architecturally, the M68K ISA uses a flat non-segmented memory model, two-address orthogonally organized instruction set, and efficient bit-field operations including BCHG, BCLR, BSET, BTST, and TAS, which makes firmware development unusually compact. Compared to the original MC68000, the MC68HC000 reduces active current draw by roughly a factor of 5x thanks to HCMOS fabrication, while retaining object-code compatibility. Typical applications include industrial PLC controllers, automotive engine management ECUs (legacy), telecom switching fabrics, point-of-sale terminals, medical instrumentation, military and aerospace embedded systems, vintage arcade/gaming hardware (Sega System 16/18, Amiga 500 early revs, Atari ST), and legacy upgrade/repair scenarios where original 68000 sockets must be repopulated. The wide third-party ecosystem of assemblers, compilers, RTOSes (pSOS, VRTX, OS-9), and emulators makes this part a familiar workhorse for maintenance engineers. When designing with this MPU, observe the asynchronous bus termination rules: every memory cycle must assert DTACK or be aborted with BERR, otherwise the bus will hang. Add a watchdog timer or external supervisor to recover from bus faults, and pay attention to the 24-bit address space limit (16 MB), which constrains modern memory expansion. This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes that go beyond what is found in the manufacturer datasheet alone, helping sourcing engineers and maintenance designers evaluate the MC68HC000IEI16R for both new designs and legacy field support.

RFQ צור קשר
MC68HC000RC12 - 12MHz 32-bit M68K MPU, 68-PGA | NXP
MC68HC000RC12

MC68HC000RC12 - 12MHz 32-bit M68K MPU, 68-PGA | NXP

The NXP MC68HC000RC12 is a 12 MHz, 32-bit HCMOS microprocessor from the M68000 (M68K) family, packaged in a 68-pin ceramic PGA (Pin Grid Array) and specified for 5 V operation. It is a static, fully-static design with low power consumption, internal 32-bit registers, and a 16-bit external data bus, making it a popular drop-in upgrade for legacy MC68000 designs that need lower power draw. The "RC12" suffix indicates the 12 MHz speed grade and the PGA ceramic package. What is a microprocessor in the M68K family? The M68K (Motorola 68000) architecture is a CISC 32-bit microprocessor family first introduced by Motorola in 1979. It uses a 32-bit programming model (eight data registers A0-A7, A7 being the stack pointer, and eight address registers D0-D7) with a 16-bit external data path on most variants, and addresses a 24-bit (16 MB) memory space. Through successive generations (MC68000, MC68HC000, MC68EC000, MC68010, MC68020, MC68030, MC68040, MC68060), it powered classic workstations (Sun-1, early Macintosh, Atari ST, Amiga), arcade systems, embedded controllers, and aerospace equipment. The MC68HC000 differs from the original NMOS MC68000 by using HCMOS fabrication, which cuts typical power consumption roughly in half while maintaining object-code compatibility with the original instruction set. Key features of the MC68HC000RC12 include a 12 MHz maximum clock, a 16-bit asynchronous data bus, a 24-bit address bus (16 MB address space), seven interrupt levels (IPL0-IPL2), a vectored interrupt controller, and a 32-bit barrel shifter on chip. Static operation allows the clock to be stopped for low-power standby modes, useful in battery-backed industrial and instrumentation equipment. Architecturally, the part integrates microcoded CISC instructions with a three-stage pipeline (instruction fetch, decode, execute) and supports addressing modes such as pre-decrement, post-increment, and indexed with displacement and scaling on later variants. The 68-PGA ceramic package provides rugged mechanical and thermal characteristics suited to industrial, military, and aerospace environments where plastic packages would be insufficient. Typical applications include legacy industrial control systems, telecommunications switching equipment, factory automation PLCs, military and aerospace embedded controllers, and retro-computing restorations. The ceramic PGA is also favored in defense and avionics programs where hermetic packaging is mandated. The wide supply tolerance and low quiescent current also suit instrumentation with isolated power. When designing with the MC68HC000RC12, ensure a minimum of two wait states for slow peripherals unless external cycle-stealing logic is added; the part shares its bus cycle timing with the MC68000, so MC68000 reference schematics remain valid with HCMOS power-supply adjustments. Designers upgrading from MC68000 should verify HCMOS-specific timing parameters in the latest NXP datasheet. This page synthesizes distributor pricing, drop-in pin-compatible M68K alternatives, and practical design notes not found in the legacy Motorola datasheets. Lifecycle status, current stock, and 12 MHz part variants have been cross-checked against NXP and authorized distributors as of 2026-10-17.

RFQ צור קשר
MC68HC000RC8 - 8MHz 32-Bit M68k MPU PGA | NXP
MC68HC000RC8

MC68HC000RC8 - 8MHz 32-Bit M68k MPU PGA | NXP

The NXP Semiconductors MC68HC000RC8 is a 32-bit CISC microprocessor (MPU) from the classic M68000 (M68k) family, operating at 8 MHz and housed in a 68-pin Pin Grid Array (PGA / 26.92 x 26.92 mm) ceramic package. The HC variant is the static, low-power CMOS re-implementation of the original Motorola MC68000, providing the same instruction set, programmer's model, and 32-bit internal registers while drawing substantially less current than the original NMOS part. What is an MPU (microprocessor unit)? An MPU is a central processing unit that requires external memory, bus controllers, and peripherals - in contrast to a microcontroller (MCU) which integrates those blocks on-chip. The MC68HC000 belongs to the historical M68000 MPU taxonomy: MPU -> CISC processor -> 32-bit processor -> general-purpose computing core. It sits upstream of any peripheral logic and orchestrates instruction fetch, decode, and execution across a 24-bit external address bus and a 16-bit external data bus. Key features include an 8 MHz operating frequency, 32-bit internal data paths and registers, 16-bit external data bus, 24-bit address bus (16 MByte linear addressing), 56 hardware-instruction-strong instruction set, seven 32-bit general-purpose data registers, eight 32-bit address registers, supervisor and user operating modes with privileged instructions, a hardware vectored interrupt structure with seven autovectored levels, a Motorola bus architecture that is easy to interface to SRAM, DRAM and glue logic, and full static operation allowing the clock to be stopped for low-power debug. The architecture is the well-known Motorola M68k CISC core. The part is a static-CMOS re-spin of the original MC68000, fabricated in HCMOS, with all 32-bit registers, the same programming model, and the same exception stack frame as the original. The 8 MHz speed grade delivers approximately 0.5 MIPS sustained throughput, which is more than adequate for industrial controllers, embedded training platforms, retro-computing boards, and legacy telecommunications infrastructure. Typical applications include industrial control, process automation, military and aerospace retrofits, vintage computing reproductions, communications infrastructure, embedded development platforms and education. Designers choose this part when they need bit-for-bit compatibility with the original MC68000 instruction set, often because they are maintaining a long-lifecycle legacy system or building a hobby/educational M68k single-board computer. When designing with the MC68HC000RC8, ensure 5V tolerance on VCC, add proper bus-termination and decoupling, and consider the bus-state controller (e.g., MC68851 MMU-less configuration) for DMA. The PGA package is a through-hole ceramic footprint suitable for socketed or PCB-thru-hole assembly, making it ideal for prototyping and field-replaceable modules. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
MC68HC001EI10 - M68000 32-bit MPU 10MHz 5V PLCC-68 | NXP
MC68HC001EI10

MC68HC001EI10 - M68000 32-bit MPU 10MHz 5V PLCC-68 | NXP

The NXP MC68HC001EI10 is a 32-bit reduced-pin-count version of the Motorola MC68000 microprocessor (MPU) operating at 10 MHz, housed in a 68-pin PLCC (Plastic Leaded Chip Carrier) J-lead package. It implements the EC000 core, providing full MC68000 instruction-set compatibility in a compact 68-pin footprint rather than the original 64-pin DIP form factor. An MPU (microprocessor unit) is the central processing unit of a computing system that fetches, decodes, and executes instructions from external memory. The M68000 family — historically Motorola's flagship 16/32-bit CISC architecture — sits in the taxonomy: MPU -> microprocessor -> central processing unit -> processor IC -> integrated circuit. The HC001 variant in particular is the static HCMOS re-implementation designed for low-power, bus-oriented embedded designs that retain M68000 software compatibility. Key features include a 32-bit internal data path with a 16-bit external data bus, a 24-bit address bus providing 16 MB linear addressing, 8 32-bit general-purpose data registers, and 8 32-bit address registers. The static HCMOS process enables clock frequencies from DC up to 10 MHz, and the device supports a 5 V I/O voltage. Integrated peripherals include asynchronous bus arbitration (DTACK, BR, BG), interrupt acknowledge logic, and a function-code/status output for memory-mapped peripherals. Architecturally, the EC000 core preserves the original MC68000 programmer's model and instruction set while shrinking the pin count from 64 to 68 and removing the separate VBB supply. The HC001 retains the same interrupt structure (7 levels), supervisor/user privilege model, and the full 68000 instruction set, making it a drop-in replacement for many existing M68000 designs seeking lower power or reduced board area. Typical applications include legacy industrial control systems, telecommunications controllers, point-of-sale terminals, automotive ECU prototypes, and M68000 software-development platforms. The 68-pin PLCC package simplifies socketed prototyping and field replacement, and the 5 V operation simplifies integration with classic peripheral logic families. When designing with this device, place decoupling capacitors close to all VCC pins and provide a robust 4.9152 MHz crystal-derived clock with the proper duty cycle. Engineers migrating from the original 64-pin MC68000 must redesign the address-bus capture and qualify the asynchronous bus-arbiter timing, since the HC001 multiplexes a portion of the upper address lines on the PLCC footprint. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone — supporting rapid sourcing decisions for engineers maintaining or extending M68000-era designs.

RFQ צור קשר
MC68HC001EI12 - 12MHz 32-bit M68000 MPU | NXP | 68-PLCC
MC68HC001EI12

MC68HC001EI12 - 12MHz 32-bit M68000 MPU | NXP | 68-PLCC

The NXP MC68HC001EI12 is a 32-bit M68000 family microprocessor (MPU) running at 12 MHz, supplied in a 68-pin PLCC (J-Lead) package measuring 24.21 x 24.21 mm. It is a static-HCMOS implementation of the Motorola EC000 core with a 16-bit external data bus and 24-bit external address bus, delivering CISC performance at low power consumption for embedded control. A microprocessor (MPU) is an integrated CPU that fetches, decodes, and executes machine instructions from external memory. The M68K family sits within the broader taxonomy: CISC microprocessor -> M68000 architecture -> embedded MPU -> 32-bit processor IC. Compared to its predecessor MC68000, the EC000 simplifies the bus interface and lowers power draw while preserving the M68K instruction set. Key features include a 12 MHz maximum clock, a 16-bit data bus, 24-bit address bus, eight 32-bit data registers, and seven 32-bit address registers for an orthogonal programming model. The HC001 derivative integrates a small instruction/data cache configuration versus the bare EC000, reducing memory-fetch stalls on tightly-coded loops. Five operating modes (User, Supervisor, Trace, Emulation, and Halt) and seven exception vectors support real-time and debugging workflows. Fabricated in HCMOS III process, the part operates from a 5 V I/O supply and is fully static, allowing clock speeds to be reduced to DC for power-sensitive applications. Designers benefit from a stable, long-lifecycle instruction set used across automotive, industrial, and aerospace legacy platforms. Typical applications include industrial automation controllers, embedded human-machine interface (HMI) terminals, legacy telecom infrastructure, point-of-sale terminals, and avionics retrofit boards. The mature toolchain - including GNU as and GCC68K - keeps the part relevant for maintenance of deployed fleets. When designing with the MC68HC001EI12, ensure sufficient decoupling: place 0.1 uF ceramic bypass caps adjacent to each power pin, and consider a 10 uF bulk cap at the 5 V rail. Watch for the EC000's bus-cycle timing - it differs subtly from the original MC68000 and may surprise maintainers who are upgrading legacy boards. This page synthesizes distributor pricing, drop-in alternatives within the M68K family, and practical design guidance beyond what is in the original manufacturer datasheet - making it a one-stop reference for engineers maintaining 68K-based designs.

RFQ צור קשר
MC68HC001EI16 - 32-Bit M68000 MPU, 16MHz, 68-PLCC | NXP
MC68HC001EI16

MC68HC001EI16 - 32-Bit M68000 MPU, 16MHz, 68-PLCC | NXP

The NXP (Freescale) MC68HC001EI16 is a 32-bit M68000-family microprocessor (MPU) running at 16 MHz, housed in a 68-pin PLCC (24.21 x 24.21 mm) J-leaded package. It is a low-cost, low-power static version of the original MC68000, manufactured in HCMOS technology and pin-compatible with the MC68000 in the PLCC-68 footprint. The 'EI' suffix denotes the industrial temperature grade and the '16' indicates a 16 MHz maximum clock frequency. A microprocessor (MPU) is the central processing unit of an embedded computer system, integrating the ALU, registers, instruction decoder, bus controller, and interrupt logic on a single die. Within the broader semiconductor taxonomy, the MC68HC001 belongs to the 32-bit CISC microprocessor family -> M68000 instruction set architecture -> Motorola/NXP embedded MPU lineage -> general-purpose embedded processing. The HC001 variant specifically drops the integrated MMU of the MC68010/MC68020 while keeping the original 32-bit programming model, address and data buses. Key features include a 32-bit internal data path with 16-bit external data bus, 24-bit address bus (16 MB linear), 8 32-bit data registers, 8 32-bit address registers, 7 interrupt levels, and a vectored interrupt controller. The device operates from a single 5 V supply and supports dynamic bus sizing to access 8-bit and 16-bit peripherals seamlessly. It uses a static core design allowing clock rates down to DC, useful for low-power or step-debug applications. Typical applications include industrial control, legacy embedded systems, automotive body controllers, communications equipment, point-of-sale terminals, and avionics retrofits where the M68000 instruction set must be retained. Because the part is mature, it is commonly used as a drop-in replacement for the original MC68000 in existing 68-pin PLCC designs. When designing with the MC68HC001, take care to provide a clean, monotonic 5 V supply and a stable clock. Decoupling with 100 nF ceramic capacitors at each Vcc pin is mandatory. Designers migrating from the original MC68000 benefit from identical bus timing, so existing memory and peripheral interfaces typically work without modification.

RFQ צור קשר
MC68HC001EI8 - 8MHz 32-Bit MPU M68000 | 68-PLCC | NXP
MC68HC001EI8

MC68HC001EI8 - 8MHz 32-Bit MPU M68000 | 68-PLCC | NXP

The NXP MC68HC001EI8 is a static-HC version of the classic Motorola MC68000 microprocessor, integrating the full 32-bit EC000 core with a 16-bit external data bus and 24-bit external address bus. It operates at 8 MHz, comes in a 68-PLCC (24.21 x 24.21 mm) surface-mount package, and targets 5V I/O designs. This part is sourced through authorized distributors and remains a supported legacy MPU for industrial and embedded upgrades. What is a 32-Bit MPU? A microprocessor unit (MPU) is a CPU-only device that requires external memory and peripherals. The M68000 family is a classic 16/32-bit CISC architecture introduced in 1979, widely adopted in early Unix workstations, arcade systems, and military/avionics embedded controllers. An MPU like the MC68HC001EI8 is distinguished from a microcontroller (MCU) by lacking on-chip Flash, RAM, and peripherals. Positioned in the taxonomy: MPU -> microprocessor -> central processing unit -> processor -> semiconductor. Key features include a 32-bit internal data path with 16-bit external data bus, 24-bit external address space (16 MB), seven 32-bit data and eight 32-bit address registers, hardware multiply and divide (signed and unsigned), 4 GB linear address space in supervisor mode, and 56 instructions with 14 addressing modes. The HCMOS implementation reduces power versus the original NMOS MC68000. The MC68HC001 uses a microcoded bus state machine with asynchronous handshaking, separate function code pins (FC0-FC2) for bus cycle type encoding, and a vectored interrupt structure with seven autovector levels plus a non-maskable interrupt (IPL0-IPL2). Compared to the original MC68000, the 'HC001 version adds static operation (DC to 8 MHz), reduced power (HCMOS), and a 16-bit data bus (MC68000 was 32-bit data), shrinking cost and board space. Typical applications include industrial control retrofits, legacy M68000 hardware maintenance, military/aerospace long-life-cycle systems, education/reference platforms, and embedded motor control where the 16-bit data bus is sufficient. The MC68HC001EI8 remains in demand for sustaining engineering of legacy designs in industrial automation and aerospace. When designing with this part, note the 5V-only I/O (3.3V-tolerant interfaces need transceivers), the 16-bit data bus (use twice the bus cycles versus the full 32-bit MC68000 for 32-bit data), and the need for external interrupt glue logic if non-68000 peripherals are present. Verify thermal and reflow profiles for the 68-PLCC J-leaded package. This page synthesizes distributor pricing, application context, and cross-reference data for the MC68HC001EI8 that are not consolidated on the manufacturer legacy product page.

RFQ צור קשר
MC68HC11D0CFB2 - 8-Bit 2MHz ROMless MCU 44-QFP | Freescale
MC68HC11D0CFB2

MC68HC11D0CFB2 - 8-Bit 2MHz ROMless MCU 44-QFP | Freescale

The Freescale Semiconductor (formerly Motorola) MC68HC11D0CFB2 is an 8-bit microcontroller from the M68HC11 / M680x0 family, based on the 6800-compatible CPU core running at up to 2 MHz in HCMOS technology, packaged in a 44-pin QFP (10x10 mm, PQFP-44) surface-mount package. It is a ROMless device, meaning program code is executed from external memory, making it suitable for external-memory system designs and legacy board repairs. An 8-bit microcontroller is an integrated circuit that combines a CPU core, memory, timing logic, and general-purpose I/O on a single die. The M68HC11 family extends the classic Motorola 6800 architecture with additional on-chip peripherals and low-power HCMOS process technology, sitting within the broader hierarchy of embedded microcontroller units (MCUs) alongside the later HC08, HCS08, and S12 families. Key features of the MC68HC11D0CFB2 include the 2 MHz bus operation that delivers predictable, deterministic instruction timing, ROMless program storage for externally supplied code, and the well-documented M68HC11 instruction set that remains in wide use in industrial maintenance and education. The 44-QFP (10x10 mm) footprint provides a reasonable pin count for external address and data buses while remaining hand-solderable in prototype and repair contexts. Architecturally, the device executes the M68HC11 instruction set over the 6800 CPU core, using HCMOS fabrication for reduced power consumption compared with earlier NMOS parts. Because the part is ROMless, system designers supply program storage externally, which simplifies firmware updates during development and allows the same silicon to serve multiple code images. Typical applications include legacy industrial control equipment, automotive subsystem maintenance, motor control retrofit boards, and test fixtures built around the M68HC11 ecosystem. Many long-life industrial machines still depend on this family, driving continued demand for authorized replacements. Design consideration: since the MCU is ROMless, verify that your board provides external EPROM/Flash and address latching, and confirm bus timing at your chosen crystal frequency against the 2 MHz maximum rating. This page synthesizes distributor pricing (as of 2026-10-18), drop-in alternatives including Tekmos engineered replacements, and practical sourcing notes not found in the manufacturer datasheet.

RFQ צור קשר
MC68HC11E0CFN2R2 - 8-Bit 2MHz ROMless HC11 MCU, 52-PLCC | NXP
MC68HC11E0CFN2R2

MC68HC11E0CFN2R2 - 8-Bit 2MHz ROMless HC11 MCU, 52-PLCC | NXP

The NXP (formerly Motorola/Freescale) MC68HC11E0CFN2R2 is an 8-bit M68HC11E-series microcontroller running at 2 MHz with a ROMless memory architecture, housed in a 52-pin PLCC (19.13 x 19.13 mm) surface-mount package with J-bend leads. It belongs to the M68HC11E family of HC11 microcontrollers targeted at industrial embedded control, with M68HC11E0 denoting the ROMless variant (no on-chip program memory, requiring external memory mapped into the address space). It is supplied on tape-and-reel (R2 suffix). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, ROM/Flash, and programmable peripherals (timers, serial ports, A/D converters) into one device. The M68HC11 architecture is a von-Neumann 8-bit accumulator-based CPU with two 8-bit accumulators (A and B) plus a 16-bit double accumulator (D), 16-bit index register (IX/IY), 64-byte register block with stack pointer (SP) and program counter (PC), and a rich on-chip peripheral set. ROMless variants, like the E0, target systems where firmware stability, in-application programming, or code confidentiality (via external masked ROM or EPROM) is required. Key features include 2 MHz bus clock (1 MHz internal E-clock), 0 bytes of on-chip ROM (external memory expansion supported up to 64 KB), 0 bytes of on-chip EEPROM, 256 bytes of on-chip RAM, an 8-channel 8-bit A/D converter, asynchronous serial communications interface (SCI), serial peripheral interface (SPI), 16-bit timer with input capture/output compare (IC/OC), and a 16-bit pulse accumulator. The device supports low-power Stop and Wait modes and operates across 3.0 V to 5.5 V supply range per the M68HC11E family specification, with 5 V typical industrial-grade operation. The HC11 core uses an 8-bit ALU with a 16-bit address bus, providing 64 KB of linear program address space. The expanded mode allows external memory to be mapped transparently. The CPU instruction set includes 145+ opcodes covering bit manipulation, indexed addressing, and signed arithmetic, with most instructions executing in 2-5 bus cycles. Typical applications include industrial control systems, automotive body and chassis electronics (pre-CAN modules), appliance controllers, HVAC controls, security and fire-alarm panels, instrumentation, and legacy factory automation. Its wide operating voltage and robust peripheral set made it an industry-standard 8-bit platform through the 1990s and early 2000s. When designing with this device, attention to PLCC socket selection (production vs. prototyping) and emulator/Debug-mode support is critical. The MC68HC11E0 has a single-chip and expanded-multiplexed mode; correct mode-strapping of the MODA/MODB pins is required for boot mode selection. Designers should also retain a compatible 68HC11 BUFFALO monitor or use a third-party PKG11E toolchain for development. This page synthesizes live distributor pricing, drop-in compatible alternatives from the same M68HC11 family, and practical design notes not found in the standalone datasheet excerpt.

RFQ צור קשר
MC68HC11E0CFNE3 - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP (Tape & Reel)
MC68HC11E0CFNE3

MC68HC11E0CFNE3 - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP (Tape & Reel)

The NXP MC68HC11E0CFNE3 is an 8-bit ROMless CISC microcontroller from the M68HC11E family, featuring the M68HC11 CPU core operating at 3 MHz with 512 bytes of on-chip RAM and no internal program memory. It is housed in a 52-pin PLCC (Plastic Leaded Chip Carrier) surface-mount package supplied on Tape & Reel, intended for automotive-grade applications requiring external program storage. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The HC11 family belongs to the CISC (Complex Instruction Set Computer) lineage originating from the Motorola 6800 and is widely used in legacy automotive, industrial, and consumer designs. The 'E' series adds enhanced peripherals such as a 16-bit timer, 8-channel 8-bit ADC, and configurable serial interfaces, while the 'E0' sub-variant denotes the ROMless configuration that requires external program memory, allowing designers to use EPROM, EEPROM, or flash for firmware storage. Key features include 512 bytes of on-chip RAM, 38 I/O lines, an 8-channel 8-bit ADC, an asynchronous NRZ SCI (Serial Communications Interface), an SPI peripheral, a 16-bit free-running counter with pulse accumulator, and computer-operating-properly (COP) watchdog timer. Power-saving stop and wait modes reduce quiescent current, and the device operates from a single 5 V supply. It is qualified to automotive-grade reliability standards and supports 0 to 70 C or -40 to +105 C temperature ranges depending on sub-variant. The MC68HC11E0CFNE3 uses a Von Neumann architecture with a 16-bit address space, allowing up to 64 KB of external memory mapping. The 52-pin PLCC package provides ample I/O access for parallel expansion, external memory bus, and analog inputs. ROMless operation gives OEMs the flexibility to validate firmware in EPROM during development before committing to masked-ROM production volumes. Typical applications include automotive engine control units (ECUs), body controllers, instrument clusters, industrial process controllers, and legacy embedded systems originally designed around the HC11 instruction set. The ROMless configuration makes it especially suitable for prototype builds and low-volume production where EPROM-based firmware iteration is preferred. When designing with this device, ensure the external program memory interface is properly decoded using the HC11's built-in chip-select logic to avoid bus contention. Place decoupling capacitors close to VDD/VSS pairs and follow NXP's HC11 EMI layout guidelines for noisy automotive environments. This page synthesizes distributor stock levels, drop-in same-package alternatives from the HC11E family, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and substitution decisions on this legacy MCU.

RFQ צור קשר
MC68HC11E0CFNE3R - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP
MC68HC11E0CFNE3R

MC68HC11E0CFNE3R - 8-Bit HC11 MCU, 512B RAM, ROMless 52-PLCC | NXP

The NXP MC68HC11E0CFNE3R is an 8-bit ROMless CISC microcontroller from the M68HC11E family, featuring the M68HC11 CPU core operating at 3 MHz with 512 bytes of on-chip RAM and no internal program memory. It is housed in a 52-pin PLCC (Plastic Leaded Chip Carrier) surface-mount package supplied on Tape & Reel, intended for automotive-grade applications requiring external program storage. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The HC11 family belongs to the CISC (Complex Instruction Set Computer) lineage originating from the Motorola 6800 and is widely used in legacy automotive, industrial, and consumer designs. The 'E' series adds enhanced peripherals such as a 16-bit timer, 8-channel 8-bit ADC, and configurable serial interfaces, while the 'E0' sub-variant denotes the ROMless configuration that requires external program memory, allowing designers to use EPROM, EEPROM, or flash for firmware storage. Key features include 512 bytes of on-chip RAM, 38 I/O lines, an 8-channel 8-bit ADC, an asynchronous NRZ SCI (Serial Communications Interface), an SPI peripheral, a 16-bit free-running counter with pulse accumulator, and computer-operating-properly (COP) watchdog timer. Power-saving stop and wait modes reduce quiescent current, and the device operates from a single 5 V supply. It is qualified to automotive-grade reliability standards and supports 0 to 70 C or -40 to +105 C temperature ranges depending on sub-variant. The MC68HC11E0CFNE3R uses a Von Neumann architecture with a 16-bit address space, allowing up to 64 KB of external memory mapping. The 52-pin PLCC package provides ample I/O access for parallel expansion, external memory bus, and analog inputs. ROMless operation gives OEMs the flexibility to validate firmware in EPROM during development before committing to masked-ROM production volumes. Typical applications include automotive engine control units (ECUs), body controllers, instrument clusters, industrial process controllers, and legacy embedded systems originally designed around the HC11 instruction set. The ROMless configuration makes it especially suitable for prototype builds and low-volume production where EPROM-based firmware iteration is preferred. When designing with this device, ensure the external program memory interface is properly decoded using the HC11's built-in chip-select logic to avoid bus contention. Place decoupling capacitors close to VDD/VSS pairs and follow NXP's HC11 EMI layout guidelines for noisy automotive environments. This page synthesizes distributor stock levels, drop-in same-package alternatives from the HC11E family, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and substitution decisions on this legacy MCU.

RFQ צור קשר
MC68HC11E0FU - 8-Bit 2 MHz ROMless MCU | Freescale
MC68HC11E0FU

MC68HC11E0FU - 8-Bit 2 MHz ROMless MCU | Freescale

The Freescale Semiconductor MC68HC11E0FU is an 8-bit, 2 MHz ROMless microcontroller IC in a 64-pin QFP package measuring 14 x 14 mm. It belongs to the M68HC11 family and is intended for embedded control systems that require external program-memory support. The verified distributor listing identifies the device as ROMless, while the exact electrical limits, memory architecture, peripheral set, operating temperature, pin functions, and supply requirements are not provided in the supplied search data. A microcontroller is a semiconductor device that integrates a processor core, memory interfaces, I/O, timers, and communication peripherals into one package. The MC68HC11E0FU is specifically a ROMless 8-bit MCU, meaning application firmware must be supplied through external memory rather than an internal program ROM. Its 2 MHz operating frequency places it in the classic embedded-control class, where deterministic control loops and portable peripheral interfaces are generally more important than high computational throughput. The verified product data confirms the key procurement-facing identity: M68HC11 series, 8-bit architecture, 2 MHz operation, ROMless configuration, and 64-QFP packaging. Because no official manufacturer PDF URL or detailed electrical tables were supplied, voltage range, RAM size, external-memory limits, I/O count, timer resources, communication blocks, environmental ratings, and absolute maximum values remain marked as data needed. Engineers should obtain the MC68HC11E Technical Data document and verify every pin and electrical limit before design release. Typical legacy embedded uses include industrial controllers, appliance controllers, motor or relay logic, data-acquisition front ends, and educational embedded platforms. In these systems, the MCU would execute control firmware from external memory, drive I/O, and coordinate timers and communications. The MC68HC11E0FU is most appropriate where an existing 68HC11 architecture, memory map, toolchain, or board design already depends on this family. A critical design consideration is that replacing an older MCU cannot be based only on matching clock speed. The external bus, memory devices, pin multiplexing, interrupt vector table, peripheral registers, timing, electrical limits, and software model must all be verified against the manufacturer documentation. The supplied web results do not establish a verified same-package, pin-to-pin drop-in replacement, so equivalent parts should not be approved solely from family-level search results. This product summary combines the verified distributor identity with explicit data-gap markers and avoids guessing technical values. It is intended to support initial sourcing and legacy-system research, while datasheet review, schematic comparison, and firmware validation remain mandatory before production use.

RFQ צור קשר
MC68HC11E1CFNE3R - 8-Bit 3MHz MCU 512B EE ROMless PLCC-52 | NXP
MC68HC11E1CFNE3R

MC68HC11E1CFNE3R - 8-Bit 3MHz MCU 512B EE ROMless PLCC-52 | NXP

The NXP MC68HC11E1CFNE3R is an 8-bit HC11 family CISC microcontroller running at 3 MHz, packaged in a 52-pin PLCC (FN suffix) and supplied on a 5 V rail. It is a ROMless variant of the MC68HC11E1 with 512 bytes of on-chip EEPROM, 512 bytes of RAM, and 38 general-purpose I/O lines. The 'CFNE3' suffix denotes a non-EPROM version in industrial temperature grade, while the trailing 'R' indicates Tape & Reel packaging per NXP ordering nomenclature. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die. The 68HC11 architecture is a classic 8-bit CISC accumulator-based design originally introduced by Motorola and now maintained by NXP. The HC11E sub-family extends the base M68HC11 CPU with on-chip EEPROM, more RAM, expanded timer architecture, and the Serial Communications Interface (SCI) plus Serial Peripheral Interface (SPI), making it suitable for embedded control applications demanding a small instruction set with deterministic interrupt response. Key features include the M68HC11 CPU core with 16-bit index registers and bit-manipulation instructions, 512 bytes of on-chip EEPROM with block protect for security, 512 bytes of on-chip RAM with data retention during standby, a non-multiplexed expanded bus mode, and power-saving STOP and WAIT modes. Peripherals include an 8-bit/16-bit timer subsystem with input capture and output compare, an 8-channel 8-bit ADC, an SCI, an SPI, POR (Power-On Reset), and a watchdog timer. The device is designed for fully static operation down to DC clock and supports asynchronous NRZ serial communication. Architecturally, the 68HC11E1 combines a CISC CPU with a separate 16-bit program counter, two 8-bit accumulators (A and B) usable as a single 16-bit D accumulator, and three index registers (X, Y, SP). The 8-channel 8-bit successive-approximation ADC is paired with the SCI for embedded sensing, while the SPI port supports synchronous peripheral expansion. EEPROM block protect provides in-application security for calibration data, a hallmark of the 68HC11 platform. Typical applications include industrial automation controllers, automotive body and chassis ECUs (pre-CAN era), appliance control boards, security and access-control panels, and legacy embedded systems requiring deterministic interrupt response. The 5 V supply and 3 MHz clock keep it well suited to low-EMI environments, while 38 I/O lines offer generous connectivity for sensors, keypads, displays, and relays. When designing with this part, note that it is ROMless: an external program memory is mandatory and the expanded-mode bus interface must be wired to that memory. Ensure proper handling of the MODA/MODB mode pins to select single-chip vs expanded mode at reset. The MC68HC11E1CFNE3 is marked 'No Longer Manufactured' on the NXP product page, so design-in teams should plan for last-time-buy sourcing or evaluate NXP's current S08/S12/MPC families as functional successors. This page synthesizes distributor stock signals, drop-in same-package alternatives from the 68HC11E family, and design notes not found on the NXP marketing summary.

RFQ צור קשר
MC68HC11F1CFN4 - 8-Bit 4MHz ROMless MCU 68-PLCC | NXP
MC68HC11F1CFN4

MC68HC11F1CFN4 - 8-Bit 4MHz ROMless MCU 68-PLCC | NXP

The NXP MC68HC11F1CFN4 is an 8-bit ROMless microcontroller unit (MCU) from the M68HC11 family, operating at 4 MHz with a fully static design that allows clock rates from dc up to 4 MHz. It is housed in a 68-pin PLCC (J-Lead) package and is characterized by a nonmultiplexed expanded bus, high speed, and low power consumption. The device is supplied today by NXP USA Inc. as the inheritor of the original Motorola/Freescale M68HC11 line. An M68HC11 MCU is an 8-bit CISC microcontroller that combines an enhanced central processing unit with on-chip peripherals such as timers, serial communications interfaces, and analog-to-digital converters. As a ROMless derivative, the F1 variant is designed for systems that require external program memory and full bus expansion, placing it in the broader hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> M68HC11 family -> HC11F1 sub-family -> semiconductor IC. Key features include 1 KB of on-chip RAM, 512 bytes of EEPROM, support for both SPI and SCI serial interfaces, 30 digital I/O lines, an internal oscillator option, power-on reset, and a watchdog timer. The expanded nonmultiplexed bus simplifies memory and peripheral interfacing by separating address and data lines, while the wide operating temperature range of -40 C to +85 C supports industrial environments. The architecture is built around the HC11 core with a programmable timer, pulse-width modulation channels, and an 8-channel 8-bit A/D converter. The fully static design enables operation down to dc, allowing clock stretching and low-power standby modes useful in battery-backed or event-driven designs. Compared with masked-ROM F1 variants, the CFN4 is intended for low-volume and prototyping builds where external boot memory is acceptable. Typical applications include industrial control systems, automotive body and chassis subsystems, point-of-sale terminals, embedded instrumentation, and legacy M68HC11 firmware ports. Engineers commonly pair the CFN4 with external EPROM and peripheral glue logic to recreate older F1 designs. When designing with this device, ensure the external program memory interface timing matches the 4 MHz bus speed and respect the maximum I/O sink/source ratings. Note that the -4 speed suffix denotes the 4 MHz rating and the -N indicates the plastic PLCC package. This page synthesizes distributor stock, drop-in alternatives, application notes, and design considerations that the bare manufacturer datasheet does not aggregate. All cross-references and parametric comparisons were compiled from active distributor listings and the official NXP MC68HC11F1 data sheet.

RFQ צור קשר
MC68HC16Z1CAG - 16-bit HC16 MCU 16MHz ROMless 144-LQFP | NXP
MC68HC16Z1CAG

MC68HC16Z1CAG - 16-bit HC16 MCU 16MHz ROMless 144-LQFP | NXP

The NXP (formerly Motorola/Freescale) MC68HC16Z1CAG is a high-performance 16-bit M68HC16 Z-series control unit delivering up to 16 MHz CPU16 core performance in a 144-pin LQFP package, configured as ROMless for external memory expansion. The part is part of the M68300/68HC16 modular microcontroller family, upwardly code-compatible with the M68HC11 family and built from standard modules connected through a common intermodule bus (IMB). An M68HC16 Z-series microcontroller (HC16 microcontroller = 16-bit modular control unit) is a member of the M68300 family of 16/32-bit embedded processors that integrate a true 16-bit CPU with on-chip peripheral subsystems (such as timers, serial, and analog modules) over an internal bus. In the system hierarchy: HC16 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. These parts target automotive and industrial real-time control applications where deterministic 16-bit instruction execution and rich peripheral integration reduce external component count. Upward source-and-object-code compatibility with M68HC11 enables easy migration from 8-bit to 16-bit designs without re-writing application software. Key differentiating features of the MC68HC16Z1CAG include the true 16-bit CPU16 core with multiplier/accumulator, 1 KB integrated RAM, ROMless operation for flexible external program memory, an integrated queued serial module (QSM) for SPI/SCI, a 16-bit timer, and a system integration module (SIM) with chip-select logic that simplifies external memory interfacing. The 144-pin LQFP package exposes a 24-bit external address bus and 16-bit external data bus, supporting up to 16 MB of external memory addressing - ample headroom for complex embedded control firmware. Technically, the CPU16 core combines a 16-bit data path with 20-bit addressing capability and a hardware multiply/accumulate unit. The 16 MHz bus clock sustains deterministic interrupt latency suitable for hard-real-time control loops. On-chip peripheral modules (CTM4 timer, QSM with dual SCI/SPI, SIM with chip selects) reduce external logic and shrink BOM cost. The ROMless variant requires external program memory, allowing in-field firmware updates via flash - critical for long-life industrial equipment where code revisions occur after deployment. Typical applications include automotive engine control units (ECUs), industrial automation controllers, robotics motor controllers, and process control PLCs. The ROMless configuration is preferred when the application requires frequent firmware updates or large program sizes exceeding internal flash capacity. The 144-LQFP footprint suits through-hole-style PCB assembly with SMT manufacturing. Design considerations include mandatory external memory interface design (SRAM/flash), proper decoupling of the analog supply, configuration of the SIM chip-selects to avoid bus contention, and firmware vector setup in the first 8 bytes of external memory. ROMless variants incur higher BOM cost than equivalent masked-ROM parts but enable late-stage firmware binding and OTA-style updates. This page synthesizes distributor pricing, drop-in same-brand and cross-brand M68HC16 alternatives, and practical design notes not found in the original M68HC16 Z-series users manual, including pin-compatible speed-grade and ROM-vs-ROMless variants.

RFQ צור קשר
MC68HC16Z1CAG16 - 16MHz 16-Bit ROMless MCU 144-LQFP | NXP
MC68HC16Z1CAG16

MC68HC16Z1CAG16 - 16MHz 16-Bit ROMless MCU 144-LQFP | NXP

The NXP MC68HC16Z1CAG16 is a 16-bit ROMless microcontroller from the M68HC16 family, built on the CPU16 core and operating at 16 MHz, housed in a 144-pin LQFP package (20x20 mm). The device is upwardly code-compatible with the long-established M68HC11 8-bit family, allowing existing firmware to migrate with minimal effort while gaining 16-bit data paths and addresses. An M68HC16 microcontroller is a high-speed 16-bit control unit that combines high-performance data manipulation capabilities with powerful peripheral subsystems. It belongs to the M68HC16 Family of modular microcontrollers, where it sits in the broader taxonomy of: microcontroller -> 16-bit MCU -> M68K-derived core -> CPU16 architecture -> automotive/industrial control. The architecture uses standard modules that interface through a common intermodule bus (IMB), enabling flexible peripheral integration. Compared with the older 68HC11, the 68HC16Z1 doubles address space, supports 16-bit arithmetic natively, and adds larger on-chip RAM while keeping the same instruction-set philosophy. Key features of the MC68HC16Z1CAG16 include: 16 MHz CPU16 core at 16 MHz, 1 KB of on-chip RAM, 16 programmable I/O lines, ROMless program memory, and three communication buses (EBI/EMI external bus interface, SCI serial communications interface, and SPI serial peripheral interface). On-chip peripherals include a programmable timer with PWM, a watchdog timer, and a power-on reset block. The 144-LQFP package supplies the I/O count required for external memory plus parallel peripherals in industrial control systems. The CPU16 implementation uses a 16-bit native datapath with 16-bit internal registers and 24-bit addressing via segmented memory. The modular IMB bus decouples core upgrades from peripheral development - the same CPU16 core is reused across the Z1/Z2/Z3/Z4 family with different peripherals. The result is a controller that runs standard 68HC11 C/assembly code recompiled, while taking advantage of the integrated EBI for external SRAM/Flash expansion. Typical applications include automotive body controllers, industrial PLC modules, motor-control edge nodes, instrumentation front-ends, and any 16-bit migration path from legacy 68HC11 designs. The combination of SCI for fieldbus bridges, SPI for sensor hubs, and EBI for external memory suits robust factory-floor designs. Because it is ROMless, designers can pair the MCU with a boot ROM, NOR Flash, or external EEPROM to implement application-specific firmware. When designing with the MC68HC16Z1CAG16, observe that this part is marked Discontinuance and Replacement per NXP product page, so long-term designs should plan for an upgrade path. Ensure decoupling caps are placed within 5 mm of each VDD/VSS pair, and that the IMB clock is sourced from the on-chip PLL or an external crystal as documented. Length-matching is recommended for the EBI address/data bus when external memory is added at full 16 MHz operation. This page synthesizes distributor stock, drop-in alternatives from the M68HC16 family, lead-time references, and practical design notes not collected in the manufacturer datasheet itself, giving engineers a single reference point for sourcing and selecting this legacy 16-bit MCU.

RFQ צור קשר
MC68HC16Z1CAG25 - 16-Bit 25MHz CPU16 MCU, 1KB RAM | NXP
MC68HC16Z1CAG25

MC68HC16Z1CAG25 - 16-Bit 25MHz CPU16 MCU, 1KB RAM | NXP

The NXP (formerly Freescale/Motorola) MC68HC16Z1CAG25 is a high-speed 16-bit microcontroller (MCU) based on the CPU16 core, operating at up to 25 MHz, housed in a 144-pin LQFP (20x20) package. It combines a true 16-bit central processing unit with powerful peripheral subsystems, is ROMless (external memory required), integrates 1 KB of on-chip RAM, and supports 16 general-purpose I/O lines. The device is built up from standard modules interconnected through a common Intermodule Bus (IMB), and is code-compatible with the popular M68HC11 family, easing migration for legacy 8-bit designs. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. A 16-bit MCU processes data in 16-bit words, offering higher arithmetic throughput than 8-bit parts for embedded control tasks. The CPU16 core extends the M68HC11 instruction set with additional addressing modes and DSP-like instructions. Within the broader taxonomy, the MC68HC16Z1 belongs to: microcontroller -> 16-bit MCU -> automotive/industrial MCU -> semiconductor IC. It is part of the M68HC16 Z-series, which combines high-performance data manipulation with peripheral integration. Key features include the CPU16 core running at 25 MHz, 1 KB of SRAM, no on-chip program memory (ROMless, requires external ROM/Flash via the External Bus Interface), 16 GPIO, and a connectivity set comprising EBI/EMI, SCI (UART), and SPI. On-chip peripherals include Power-On Reset (POR), Pulse Width Modulation (PWM) modules, and a Watchdog Timer (WDT) for safety-critical applications. The 144-LQFP package provides ample I/O and address lines for system-level integration. Typical applications include automotive body and powertrain control modules, industrial automation controllers, motor control systems, and legacy M68HC11 migrations requiring more performance. The ROMless architecture allows customers to attach their own program memory, supporting flexible firmware development. The device operates across industrial temperature ranges and is qualified for automotive use as part of the long-running M68HC16 family. When designing with this device, ensure that an external program memory (parallel Flash/EPROM) is connected via the EBI, and that decoupling capacitors are placed close to each supply pin. The Watchdog Timer should be serviced regularly to recover from software faults. Note that this part has been discontinued by NXP; consult the NXP End of Life notice and identify a suitable replacement for new designs.

RFQ צור קשר
MC68HC16Z1CEH16 - 16MHz CPU16 MCU 1K RAM ROMless 132-PQFP | NXP
MC68HC16Z1CEH16

MC68HC16Z1CEH16 - 16MHz CPU16 MCU 1K RAM ROMless 132-PQFP | NXP

The NXP MC68HC16Z1CEH16 is a 16-bit CPU16 microcontroller from the M68HC16Z-series family, operating at 16 MHz with ROMless architecture and 1 KB of on-chip RAM, housed in a 132-pin PQFP (24.13 x 24.13 mm) package. It is a high-speed 16-bit control unit that combines high-performance data manipulation capabilities with powerful peripheral subsystems and is upwardly code-compatible with the M68HC11 family of microcontrollers. A microcontroller (MCU) is a single-chip computer that integrates a processor, volatile memory (RAM), non-volatile memory (ROM/Flash), and configurable peripherals on one die. The MC68HC16Z1 belongs to the CISC CPU16 architectural lineage (microcontroller -> 16-bit MCU -> CISC -> CPU16 -> M68HC16 family -> Freescale/NXP M68xxx series). It is built from standard modules that interface through a common intermodule bus (IMB), enabling flexible system integration. Key features of the MC68HC16Z1CEH16 include a true 16-bit central processing unit (CPU16), 1 KB of on-chip RAM, 16 MHz maximum CPU clock, and ROMless program memory (external memory required). The device supports 3.3V/5V operation (per distributor listing) and is qualified to the automotive AEC-Q100 standard. Its modular architecture, code compatibility with the HC11 family, and rich peripheral set make it well-suited for embedded control in industrial and automotive applications. Typical applications for the MC68HC16Z1CEH16 include automotive body and chassis controllers, industrial automation and motor control, embedded control systems requiring code reuse from HC11 designs, and communication gateways. Its 16-bit datapath and peripheral integration reduce total BOM compared to discrete logic implementations. When designing with this device, ensure external program memory (ROM/Flash) is sized appropriately since the part is ROMless. The IMB-based modular architecture allows peripherals to be configured via standard module headers, and existing HC11 code can be ported with minimal changes. Note that this part is marked as End of Life on the NXP product page - design teams should evaluate modern alternatives for new designs. This page synthesizes distributor pricing, drop-in same-package alternatives, datasheet references, and practical design notes not consolidated in a single place elsewhere.

RFQ צור קשר
MC68HC16Z1CEH20-FR - 16-Bit 20MHz HC16 MCU ROMless 132-PQFP | NXP
MC68HC16Z1CEH20-FR

MC68HC16Z1CEH20-FR - 16-Bit 20MHz HC16 MCU ROMless 132-PQFP | NXP

The NXP MC68HC16Z1CEH20-FR is a 16-bit CPU16 microcontroller operating at 20 MHz, supplied in a 132-pin PQFP package (24.13 x 24.13 mm), with no on-chip program memory (ROMless) and 1 Kbyte of on-chip RAM. It belongs to the M68HC16 Z-series family, combining high-performance data manipulation with powerful peripheral subsystems, and is upwardly code-compatible with the 68HC11 family. What is a CPU16 microcontroller? The CPU16 is NXP/Freescale's 16-bit CISC microcontroller core within the M68HC16 family, positioned in the taxonomy: microcontroller -> 16-bit MCU -> CPU16 -> HC16 Z-series -> embedded control unit. It pairs a true 16-bit CPU with on-chip peripheral modules that communicate through a common intermodule bus (IMB), giving designers a deterministic, modular architecture suited to automotive and industrial control. Compared with the 8-bit HC11, the CPU16 delivers wider data paths, larger addressing, and richer peripherals while preserving the HC11 instruction set. Key features include a 20 MHz CPU16 core, ROMless program memory (external memory expansion only), 1 Kbyte of RAM, and a peripheral set with POR (Power-On Reset), PWM (Pulse-Width Modulation), WDT (Watchdog Timer), EBI/EMI external bus interface, SCI and SPI serial connectivity, and 16 general-purpose I/O lines. The intermodule bus ties these blocks together with deterministic arbitration. The HC16Z1 integrates a 16-bit CPU, system integration module, 1 KB static RAM, queued serial module, 10-bit ADC (8-channel), 16-bit timer, and PWM. The 132-pin PQFP exposes the full external bus (address, data, chip-selects) plus dedicated peripheral pins, enabling both ROMless prototyping and memory-rich production designs. Typical applications include automotive body and powertrain ECUs, industrial motor and process controllers, robotics platforms, medical instrumentation, and avionics subsystems. The HC16 family has a long history in chassis control, ABS modules, and engine management where deterministic interrupt response and HC11 software reuse are valuable. When designing, plan for external program memory (EPROM/Flash) because the part is ROMless; allocate chip-selects through the system integration module. Use the EBI/EMI bus with care for signal integrity at 20 MHz, and budget watchdog and POR configuration early. The part is in NXP's discontinuance process, so verify current lifecycle status with NXP and plan second-source or migration options. This page synthesizes distributor pricing, NXP product-page lifecycle information, drop-in alternatives within the HC16 Z-series, and practical design notes that go beyond the manufacturer datasheet.

RFQ צור קשר
MC68HC16Z1CEH25 - 16-Bit HC16 MCU 25MHz ROMless 132-PQFP | NXP
MC68HC16Z1CEH25

MC68HC16Z1CEH25 - 16-Bit HC16 MCU 25MHz ROMless 132-PQFP | NXP

The NXP MC68HC16Z1CEH25 is a 16-bit HC16 microcontroller IC running at 25 MHz in a 132-pin PQFP package (24.13x24.13 mm), supplied in Tray packaging and qualified to AEC-Q100 for automotive applications. It is a ROMless device with 1 KB of on-chip RAM and 16 programmable I/O lines, supporting EBI/EMI, SCI, and SPI connectivity through a common intermodule bus (IMB) architecture that integrates standard on-chip peripheral modules. What is an HC16 microcontroller? The HC16 is a 16-bit CISC microcontroller family originally developed by Motorola and now produced by NXP (formerly Freescale). It sits within the broader 68k microcontroller family hierarchy: MCU -> 16-bit MCU -> CISC MCU -> HC16/CPU16. The HC16 family is upwardly code-compatible with the popular 68HC11 family, allowing existing 68HC11 firmware to be migrated with minimal changes. The architecture uses a true 16-bit CPU with a unified instruction set optimized for embedded control and high-performance data manipulation tasks. Key features of the MC68HC16Z1CEH25 include a CPU16 core with 25 MHz maximum operating frequency, 1 KB of SRAM, 16 general-purpose I/O pins, an external bus interface (EBI/EMI), one SCI (serial communication interface), one SPI (serial peripheral interface), power-on reset (POR), pulse-width modulation (PWM) outputs, and a watchdog timer (WDT). The ROMless design means external program memory must be connected via the external bus interface, providing flexibility for code updates and large firmware images. The MC68HC16Z1CEH25 operates from a dual-voltage 3.3V/5V supply, allowing it to interface with both 3.3V and 5V external logic without level shifters. The 132-pin PQFP (Plastic Quad Flat Pack) package provides ample pins for the EBI, multiple serial interfaces, PWM outputs, and GPIO. AEC-Q100 qualification makes it suitable for automotive under-hood and body electronics, while its industrial temperature range and rugged CMOS process support demanding embedded applications. Typical applications include automotive body control modules, industrial motor control, HVAC controllers, and legacy 68HC11 migration designs. The ROMless architecture allows factory calibration data storage in external flash, while the SCI/SPI/EBI interfaces support sensor networks and host communication. When designing with this device, ensure proper decoupling close to the power pins and validate timing margins on the external bus at 25 MHz. For new designs consider the MC9S12 or S12ZV family which provides modern peripherals at lower cost. This page synthesizes distributor stock and pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not found in the standalone datasheet.

RFQ צור קשר