LM239DR2G vs LM239DG השוואה
השוואה מפורטת זה לצד זה של LM239DR2G מאת onsemi ו LM239DG מאת onsemi. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | LM239DR2G | LM239DG |
|---|---|---|
| מותג | onsemi | onsemi |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | Obsolete |
| Comparator Type | Quad differential comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| סוג פלט | Open-collector | Open collector with CMOS, open-collector, and TTL compatibility |
| Logic Compatibility | CMOS and TTL compatible | — |
| Input Offset Voltage | 5 mV typical | — |
| Input Bias Current | 250 nA typical | — |
| Propagation Delay | 1.3 microseconds typical | — |
| טווח טמפרטורת פעולה | -25 C to +85 C | -25 C to +85 C |
| מארז | 14-SOIC | 14-pin SOIC |
| סוג הרכבה | Surface mount | Surface mount |
| סטטוס RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | Not AEC-Q100 qualified | — |
| Single-Supply Operation | Yes | — |
| Output Pull-Up Resistor | External, application dependent | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Supply Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Input Common-Mode Includes Ground | [DATA_NEEDED: common-mode range specification] | — |
| Number of Elements | — | 4 comparators |
| Dual-Supply Voltage Range | — | -18 V to +18 V |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | +/-5 nA |
| Maximum Input Offset Voltage | — | 1.3 mV |
| Package Width | — | 3.90 mm |
| Lead Pitch | — | 0.154 mm |
| Supply Configuration | — | Single supply or dual supply |
| REACH Status | — | [DATA_NEEDED: REACH status] |