LM239DR2G vs LM239DG तुलना
विस्तृत दोनों ओर की तुलना LM239DR2G द्वारा onsemi और LM239DG द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM239DR2G | LM239DG |
|---|---|---|
| ब्रांड | onsemi | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Comparator Type | Quad differential comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| आउटपुट प्रकार | Open-collector | Open collector with CMOS, open-collector, and TTL compatibility |
| Logic Compatibility | CMOS and TTL compatible | — |
| Input Offset Voltage | 5 mV typical | — |
| Input Bias Current | 250 nA typical | — |
| Propagation Delay | 1.3 microseconds typical | — |
| ऑपरेटिंग तापमान रेंज | -25 C to +85 C | -25 C to +85 C |
| पैकेज | 14-SOIC | 14-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | Not AEC-Q100 qualified | — |
| Single-Supply Operation | Yes | — |
| Output Pull-Up Resistor | External, application dependent | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Supply Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Input Common-Mode Includes Ground | [DATA_NEEDED: common-mode range specification] | — |
| Number of Elements | — | 4 comparators |
| Dual-Supply Voltage Range | — | -18 V to +18 V |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | +/-5 nA |
| Maximum Input Offset Voltage | — | 1.3 mV |
| Package Width | — | 3.90 mm |
| Lead Pitch | — | 0.154 mm |
| Supply Configuration | — | Single supply or dual supply |
| REACH Status | — | [DATA_NEEDED: REACH status] |