SP485ECN-L vs SP485EEN-L השוואה
השוואה מפורטת זה לצד זה של SP485ECN-L מאת MaxLinear ו SP485EEN-L מאת MaxLinear. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ פעילהשוואת מפרטים
| פרמטר | SP485ECN-L | SP485EEN-L |
|---|---|---|
| מותג | MaxLinear | MaxLinear |
| קטגוריה | Interface ICs | Interface ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Product Type | RS-422/RS-485 half-duplex line transceiver | Half-duplex RS-422/RS-485 transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| מתח אספקה | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| קצב נתונים | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | 10,000 kbps |
| Technology | BiCMOS | — |
| מארז | 8-pin SOIC | 8-pin SOIC |
| Package Width | 0.154 in (3.90 mm) | — |
| סוג הרכבה | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| טווח טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| זרם אספקה | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | — |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| מתח אספקה פעיל | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |