SP485ECN-L vs SP485EEN-L 비교

다음의 상세 나란히 비교: SP485ECN-L 제조: MaxLinear 및 SP485EEN-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 SP485ECN-L SP485EEN-L
브랜드 MaxLinear MaxLinear
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-422/RS-485 half-duplex line transceiver Half-duplex RS-422/RS-485 transceiver
Driver Count 1 driver —
Receiver Count 1 receiver —
공급 전압 5 V —
Protocol Support RS-422 and RS-485 —
Duplex Mode Half-duplex Half-duplex
데이터 속도 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps 10,000 kbps
Technology BiCMOS —
패키지 8-pin SOIC 8-pin SOIC
Package Width 0.154 in (3.90 mm) —
실장 유형 Surface mount Surface mount
Packaging Tape and reel —
Human Body Model ESD Tolerance Over ±15 kV —
IEC 61000-4-2 Air Discharge ESD Tolerance Over ±15 kV —
동작 온도 범위 [DATA_NEEDED: operating temperature range] -40 C to +85 C
공급 전류 [DATA_NEEDED: typical and maximum supply current] —
Differential Input Voltage [DATA_NEEDED: receiver input voltage range] —
Output Current [DATA_NEEDED: driver output current] —
Shutdown Support Not stated for SP485ECN-L in the verified data —
RoHS 상태 [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status Lead-free product marking is stated in the verified search data —
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Alternate Family Data Rate — Up to 5 Mbps
동작 공급 전압 — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청