Analog Devices

AD526SD - 1, 2, 4, 8, 16 Gain SPGA | Analog Devices

MPN: AD526SD ✓ פעיל
16-CDIP Package
כמות הזמנה מינימלית: 1 |

AD526SD סקירה

The Analog Devices AD526SD is a single-ended, monolithic software-programmable gain amplifier providing five selectable gain values of 1, 2, 4, 8, and 16. It combines the amplifier, precision resistor network, and TTL-compatible latched digital inputs in a 16-lead CDIP package, so no external gain-setting resistors are required. The device accepts a single-ended input and provides an analog output suitable for instrumentation, data acquisition, and industrial control systems.

A software-programmable gain amplifier, or SPGA, belongs to the operational-amplifier and analog signal-conditioning hierarchy. It combines a closed-loop amplifier with selectable internal feedback ratios selected by digital control logic. This integration makes gain changes repeatable and reduces board area compared with a discrete amplifier and switched-resistor network. The AD526SD is therefore useful when a system must adjust measurement range according to changing sensor or input conditions.

The AD526 family offers programmable gains of 1, 2, 4, 8, and 16. Its latched inputs allow the selected gain to remain stable after the control word is applied, which is important for multiplexed measurement systems. TTL-compatible logic levels simplify connection to microprocessor, microcontroller, or programmable-logic control circuitry. Because the amplifier, resistor network, and digital interface are integrated in one package, the design does not require external matched resistors or gain-setting components.

The monolithic construction supports compact analog signal conditioning while preserving the normal precision behavior associated with an integrated resistor network. The device is intended for single-ended input signals, so system designers should use suitable input protection and referencing when the source can exceed the amplifier's specified operating limits. Digital control should be changed while maintaining valid power-supply conditions, and the selected latch state should be allowed to settle before the analog output is measured.

Typical applications include programmable instrumentation amplifiers, data-acquisition front ends, industrial sensor interfaces, medical instrumentation, and laboratory measurement systems. It is particularly useful when a single analog input must be scaled across several ranges without replacing external resistors. In such systems, the AD526SD can be placed near the source to condition the signal before routing it into an ADC, provided the complete signal chain satisfies the manufacturer's grounding and stability requirements.

The principal design consideration is to treat the digital gain interface and analog signal path as one precision circuit. Keep the input and output routing compact, provide a stable reference and supply arrangement, and observe the required bypass recommendations in the manufacturer datasheet. When choosing a replacement, verify the exact gain table, temperature grade, package material, pin assignment, and electrical limits rather than relying only on the AD526 family name.

This page organizes the AD526SD's gain-control capabilities, package information, procurement path, alternatives, and application guidance into one engineering reference. It also distinguishes exact same-footprint replacement candidates from broader functional comparisons so engineers can assess board-level compatibility before redesigning an existing instrument.

חלופות תחליף ישיר עבור AD526SD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD526SD (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type.

Analog Devices
Package: 16-pin PDIP
Product Type: Single-ended monolithic software programmable gain amplifier
השווה עם AD526SD →

AD526JNZ

✅ Drop-In
Analog Devices
📦 16-CDIP
Single-ended monolithic software programmable gain amplifier · 1 circuit · 1, 2, 4, 8, and 16 · 16x · 1x · 4 MHz · Single-ended · BiFET

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD526JD

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-CDIP
Shares all 5 gain settings (100%) but differs in ordering and temperature-grade suffix

📋 חלופה להתייחסות (לא בקטלוג)

AD526JR

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-CDIP
Shares all 5 gain settings (100%) but differs in ordering and temperature-grade suffix

📋 חלופה להתייחסות (לא בקטלוג)

AD526KD

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-CDIP
Shares all 5 gain settings (100%) but differs in ordering and device-grade suffix

📋 חלופה להתייחסות (לא בקטלוג)

AD526SD/883B

✅ Drop-In
📦 16-CDIP
Shares all 5 gain settings (100%) while adding a separately documented /883B qualification ordering code

📋 חלופה להתייחסות (לא בקטלוג)

AD526SD דירוגים מרביים ומאפיינים חשמליים

Product Type Single-ended monolithic software-programmable gain amplifier
Number of Circuits 1 circuit
Programmable Gain Values 1, 2, 4, 8, and 16
Input Configuration Single-ended
Digital Control Interface TTL-compatible latched inputs
Integrated Elements Amplifier, resistor network, and latched digital inputs
External Gain-Setting Components 0 components required
מארז 16-CDIP
סוג הרכבה Through-hole
מספר פינים 16 pins

מדריך תצורת פינים של AD526SD 16-cdip

תצורת פינים עבור AD526SD (מארזת 16-cdip). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 16-cdip עבור AD526SD

אין נתוני פריסת פינים מפורטים עבור AD526SD.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD526SD מתאים עבור 6 יישוםs: Programmable Instrumentation Front End, Data Acquisition Input Conditioning, Industrial Sensor Interface, Medical Measurement Equipment, Laboratory Multimeter Signal Path, Programmable Test and Measurement System.

🏭

Programmable Instrumentation Front End

The AD526SD fits instrumentation front ends that must accommodate changing input ranges without external switched resistors. Its programmable gains of 1, 2, 4, 8, and 16 allow a sensor signal to be scaled for an ADC while preserving one board layout. The integrated amplifier and resistor network simplify the analog path, and the latched TTL-compatible controls keep each gain setting stable while the host controller acquires a measurement. Because the device is single-ended, the source must be referenced appropriately and protected against overvoltage. The 16-CDIP format favors through-hole, laboratory, and industrial instrument designs where leaded assembly and serviceability are priorities.

🖥️

Data Acquisition Input Conditioning

The AD526SD provides a compact way to condition a single-ended channel before conversion by an ADC. A host can select gains of 1, 2, 4, 8, or 16 as the input level changes, using the AD526's internal resistor network instead of external gain components. Latched control inputs make the selected ratio suitable for repeated acquisition cycles, while the single amplifier channel matches a one-signal conditioning requirement. Layout should minimize sensitive-input routing and maintain a stable reference path. The through-hole 16-CDIP package can simplify prototype construction, although production designs should verify thermal performance and environmental requirements against the manufacturer limits.

⚡

Industrial Sensor Interface

The AD526SD is appropriate for industrial sensors whose output span changes with stimulus, process condition, or sensor selection. Its five programmed gains cover a 16:1 adjustment range, allowing the same conditioning board to accommodate several signal magnitudes. The integrated network removes the need to match external feedback resistors, while TTL-compatible latched inputs can be driven by industrial digital control circuitry when electrical compatibility is confirmed. Grounding and common-mode conditions remain critical for reliable operation. Engineers should check the signal range, supply voltage, input protection, and temperature grade in the AD526 datasheet before applying the amplifier directly to a transducer output.

💊

Medical Measurement Equipment

The AD526SD can support medical and laboratory measurement circuits that need selectable gain across a controlled input range. Gains of 1, 2, 4, 8, and 16 permit range selection without changing external resistor networks, and the integrated design reduces the number of precision components that must be matched. Because the AD526SD is a single-ended device, the medical instrumentation architecture must provide a suitable reference and input protection. The manufacturer datasheet should define the operating limits for the exact suffix, and the overall instrument must satisfy its applicable product and quality requirements rather than treating the amplifier qualification as an approval of the finished system.

🔧

Laboratory Multimeter Signal Path

The AD526SD suits laboratory instruments that measure voltage over several decades while retaining a calibrated analog path. A digital control system can select from five gains, allowing the same input network to cover a 16:1 signal range. The latched controls help prevent accidental gain changes during a measurement, and the absence of external gain-setting components simplifies instrument construction. The 16-CDIP package is particularly convenient for through-hole laboratory equipment and serviceable prototypes. Calibration procedures should include each programmed gain because resistor-network accuracy and analog offset ultimately determine instrument precision. Verify input range, settling behavior, and supply requirements from the manufacturer documentation.

📡

Programmable Test and Measurement System

The AD526SD is useful in automated test equipment where the same input must be measured at multiple sensitivity levels. Programmable gains of 1, 2, 4, 8, and 16 allow a controller to configure attenuation or amplification for different source ranges, while the latched interface supports repeatable setup. Its monolithic resistor network reduces external component count and simplifies calibration inventory. The single-ended architecture fits sources with a defined common reference and low impedance. Layout should keep the gain-control traces away from sensitive analog inputs, and system timing should include the settling period required by the selected gain. Use the AD526 datasheet for exact switching and timing details.

What is the AD526SD and what gains does it provide?
The AD526SD is a single-ended, monolithic software-programmable gain amplifier with programmable gains of 1, 2, 4, 8, and 16. According to the Analog Devices AD526 datasheet, it integrates the amplifier, resistor network, and TTL-compatible latched inputs in one device. It requires no external gain-setting components, making it suitable for compact instrumentation and data-acquisition signal-conditioning circuits.
What package does the AD526SD use?
The AD526SD is supplied in a 16-lead CDIP package for through-hole PCB assembly. The Analog Devices product listing identifies the device as a one-circuit programmable gain amplifier in a 16-CDIP package. Because it is a through-hole ceramic DIP rather than a surface-mount package, PCB designers should confirm that the existing 16-pin footprint, drill pattern, and mechanical clearance remain acceptable.
Where can I download the AD526SD datasheet PDF?
The official AD526SD datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD526.pdf. The manufacturer datasheet is the preferred document for electrical characteristics, pin assignments, gain-control logic, application examples, and ordering information. Use the package and ordering tables in that document to verify the exact AD526SD configuration before beginning a PCB or production-design review.
Does the AD526SD need external gain-setting resistors?
No. The AD526SD requires no external components for gain selection because its amplifier, resistor network, and TTL-compatible latched control inputs are integrated on one monolithic chip. According to the Analog Devices AD526 datasheet, the available gains are 1, 2, 4, 8, and 16. This integration reduces board area and avoids the resistor matching and switch-selection problems associated with a discrete programmable gain stage.
How are gain settings selected in the AD526SD?
The AD526SD uses TTL-compatible latched digital inputs to select the active gain setting. The selected control word remains latched after it is applied, helping the analog output settle at a stable gain during measurement. According to the Analog Devices AD526 datasheet, the supported gains are 1, 2, 4, 8, and 16. Consult the truth table and timing information in the manufacturer datasheet before designing the host-interface logic.
Where can I request a quote for AD526SD?
Use the Request a Quote form on this page to request current AD526SD pricing, availability, lot traceability, and lead-time information for the exact 16-CDIP orderable configuration. The manufacturer identifies AD526SD as a dedicated orderable part, so request the package suffix and quantity in the quote. This avoids ambiguity between the standard AD526SD and separately documented military or screened-ordering variants.
What is the current lead time for AD526SD?
The current AD526SD lead time should be confirmed through the Request a Quote form on this page because production allocation can change with demand and package sourcing. Include the required quantity, date code policy, and whether a separately documented /883B version is acceptable. The Analog Devices product and datasheet pages identify the AD526 family and its orderable configurations, while a quotation provides the transaction-specific schedule.
Is AD526SD currently in stock?
Current AD526SD stock status should be requested through the Request a Quote form on this page. Stock for a 16-CDIP programmable gain amplifier can vary by exact orderable suffix, quantity, and shipment location. The manufacturer product page confirms the AD526 family, but a live quotation is the appropriate route for checking production inventory, scheduled delivery, and approved sourcing channels.
What is the price of AD526SD?
Use the Request a Quote form on this page for the current AD526SD unit price and quantity schedule. The quote should identify the exact 16-CDIP configuration and applicable order quantity so that price, availability, and lead time are aligned. Avoid treating an obsolete, differently suffixed, or military-auditioned version as equivalent to the standard AD526SD without first checking the manufacturer ordering information.
AD526SD vs AD526JN: which is the better replacement choice?
The AD526JN is a closely related AD526-family candidate, but it should be selected only after its temperature grade, package material, and ordering suffix are checked against the AD526SD. Both devices are associated with the same 1, 2, 4, 8, and 16 gain architecture according to the Analog Devices AD526 documentation. For a drop-in decision, compare the pin assignments and full operating limits in the manufacturer datasheet, not just the family name.
What is the difference between AD526SD and AD526JN?
The principal documented differences between AD526SD and AD526JN are their ordering and package or qualification configurations, while both belong to the AD526 programmable-gain-amplifier family. The AD526 family provides gains of 1, 2, 4, 8, and 16 and uses TTL-compatible latched inputs. Confirm the exact electrical ratings, temperature range, package construction, and military-ordering status in the Analog Devices datasheet before treating either device as a substitute.
When should I choose AD526SD over AD526JN?
Choose the AD526SD when the design specifically requires the AD526SD ordering configuration, including its 16-CDIP construction and associated operating and environmental requirements. Choose AD526JN only when its package, temperature grade, qualification, and electrical ratings satisfy the target system and the mechanical footprint is confirmed compatible. For either choice, preserve the AD526 family's five programmed gains: 1, 2, 4, 8, and 16.
Is AD526SD suitable for industrial sensor measurement?
The AD526SD is suitable for industrial sensor measurement when the selected input range, supply rails, gain accuracy, and temperature grade fit the application. Its integrated switchable resistor network supports gains of 1, 2, 4, 8, and 16, allowing one analog front end to cover several sensor ranges. The Analog Devices AD526 datasheet should be checked against the sensor output, ADC input range, common-mode limits, and environmental requirements.
What is the best drop-in replacement for AD526SD?
The best drop-in replacement is the AD526-family ordering variant that has the same 16-pin electrical pinout, compatible gain-control logic, acceptable accuracy, and an operating grade suitable for the target application. AD526JN is a documented family candidate, while AD526SD/883B may suit a separately specified military-audition procurement. No replacement should be approved solely by package count; verify pin assignment and manufacturer ordering tables first.
What can replace AD526SD?
AD526-family devices are the closest replacement candidates because they retain the same programmable gain architecture and TTL-compatible latched control approach. The AD526JN and AD526SD/883B appear in family-comparison and ordering contexts, but suitability depends on package construction, temperature grade, qualification, and exact suffix. Ask for a quote for the selected alternative and compare it against the AD526 datasheet before production release.
Is AD526SD the same as AD526JN?
No. AD526SD and AD526JN share the core AD526 programmable-gain function, but their ordering suffixes distinguish different device configurations. The shared gains are 1, 2, 4, 8, and 16, and both use latched TTL-compatible control inputs. They should not be treated as identical until package material, temperature rating, qualification, and electrical limits have been compared in the manufacturer's ordering documentation.
What are the key specifications of AD526SD engineers should know?
The key AD526SD specifications are its single-ended architecture, five programmable gains of 1, 2, 4, 8, and 16, integrated resistor network, TTL-compatible latched inputs, and 16-CDIP package. The Analog Devices AD526 datasheet states that no external components are required. Supply voltage, input range, gain error, bandwidth, offset, and temperature limits should be taken directly from the manufacturer tables for the exact ordering suffix.

נתוני עזר הנדסיים עבור AD526SD — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose AD526SD when the design calls for the exact standard AD526 ordering configuration, a single-ended input, and programmable gains of 1, 2, 4, 8, and 16 in a 16-CDIP package. AD526JN is a family candidate when its package construction, temperature grade, and ordering requirements are acceptable, but it should not replace the AD526SD without a complete suffix comparison. AD526JD, AD526JR, and AD526KD may suit different grade or package requirements within the family; verify their electrical limits and procurement status. AD526SD/883B is relevant when the system requires a separately documented qualification code. In every case, prioritize exact pin compatibility, gain accuracy, input range, supply voltage, temperature rating, and qualification over the shared gain-setting headline.

השוואה עם חלופות

פרמטר מוצר זה AD526JN AD526JD AD526JR AD526KD AD526SD/883B
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-CDIP 16-CDIP 16-CDIP 16-CDIP 16-CDIP 16-CDIP
Programmable Gain Values 1, 2, 4, 8, and 16 1, 2, 4, 8, and 16 1, 2, 4, 8, and 16 1, 2, 4, 8, and 16 1, 2, 4, 8, and 16 1, 2, 4, 8, and 16
Digital Control Interface TTL-compatible latched inputs TTL-compatible latched inputs TTL-compatible latched inputs TTL-compatible latched inputs TTL-compatible latched inputs TTL-compatible latched inputs
External Gain Components 0 components required 0 components required 0 components required 0 components required 0 components required 0 components required
Ordering Qualification Standard AD526SD ordering suffix AD526JN ordering suffix AD526JD ordering suffix AD526JR ordering suffix AD526KD ordering suffix /883B qualification code

מבדילים עיקריים

  • Complete integrated gain stage (לעומתAD526JN)
  • Serviceable 16-CDIP implementation (לעומתAD526JD)
  • Monolithic resistor network eliminates external gain parts (לעומתAD526JR)

הערות תכנון

Route the analog input and output as short, quiet traces and connect the bypass capacitors close to their specified supply pins. Keep the TTL-compatible gain-control traces away from the sensitive input node because switching activity at the digital interface can couple into a high-impedance source. Use a solid ground reference for the entire analog path and follow the grounding configuration shown in the Analog Devices AD526 datasheet.

Do not approve a family member as a drop-in replacement solely because it is labeled AD526. Compare the complete ordering table, pin assignment, package material, temperature grade, qualification code, gain accuracy, supply range, and input limits. The AD526JN is explicitly visible in family-comparison results, while /883B denotes a separate qualification ordering code. Confirm the exact suffix before changing a released BOM or production drawing.

Command the gain only when the analog input is within a safe operating condition, and allow the circuit to settle before taking a measurement. The latched interface holds the programmed ratio, but that does not remove the device's normal settling behavior when a new gain is selected. Include the gain-switching interval in the measurement timing budget and verify it against the manufacturer timing and gain-error characteristics.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The AD526 is an Analog Devices mixed-signal amplifier rather than an automotive-qualified device in the standard AD526SD configuration. Exact material and environmental compliance should be confirmed for the selected orderable suffix.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD526SD datasheet AD526SD datasheet pdf AD526SD pinout AD526SD 16-CDIP AD526SD programmable gain amplifier AD526SD gains 1 2 4 8 16 AD526SD equivalent AD526SD replacement AD526SD vs AD526JN AD526SD price AD526SD stock Analog Devices AD526SD

רכיבים ומונחים קשורים

Analog Devices AD526SD AD526 AD526JN AD526JD AD526JR AD526KD AD526SD/883B software-programmable gain amplifier SPGA operational amplifier analog signal conditioner instrumentation amplifier programmable gain TTL-compatible logic latched digital input monolithic resistor network single-ended input 16-CDIP ceramic dual in-line package through-hole package data acquisition industrial sensor interface medical instrumentation gain error
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר