AD526SD - 1, 2, 4, 8, 16 Gain SPGA | Analog Devices
MPN: AD526SD ✓ 啟用中AD526SD 概覽
A software-programmable gain amplifier, or SPGA, belongs to the operational-amplifier and analog signal-conditioning hierarchy. It combines a closed-loop amplifier with selectable internal feedback ratios selected by digital control logic. This integration makes gain changes repeatable and reduces board area compared with a discrete amplifier and switched-resistor network. The AD526SD is therefore useful when a system must adjust measurement range according to changing sensor or input conditions.
The AD526 family offers programmable gains of 1, 2, 4, 8, and 16. Its latched inputs allow the selected gain to remain stable after the control word is applied, which is important for multiplexed measurement systems. TTL-compatible logic levels simplify connection to microprocessor, microcontroller, or programmable-logic control circuitry. Because the amplifier, resistor network, and digital interface are integrated in one package, the design does not require external matched resistors or gain-setting components.
The monolithic construction supports compact analog signal conditioning while preserving the normal precision behavior associated with an integrated resistor network. The device is intended for single-ended input signals, so system designers should use suitable input protection and referencing when the source can exceed the amplifier's specified operating limits. Digital control should be changed while maintaining valid power-supply conditions, and the selected latch state should be allowed to settle before the analog output is measured.
Typical applications include programmable instrumentation amplifiers, data-acquisition front ends, industrial sensor interfaces, medical instrumentation, and laboratory measurement systems. It is particularly useful when a single analog input must be scaled across several ranges without replacing external resistors. In such systems, the AD526SD can be placed near the source to condition the signal before routing it into an ADC, provided the complete signal chain satisfies the manufacturer's grounding and stability requirements.
The principal design consideration is to treat the digital gain interface and analog signal path as one precision circuit. Keep the input and output routing compact, provide a stable reference and supply arrangement, and observe the required bypass recommendations in the manufacturer datasheet. When choosing a replacement, verify the exact gain table, temperature grade, package material, pin assignment, and electrical limits rather than relying only on the AD526 family name.
This page organizes the AD526SD's gain-control capabilities, package information, procurement path, alternatives, and application guidance into one engineering reference. It also distinguishes exact same-footprint replacement candidates from broader functional comparisons so engineers can assess board-level compatibility before redesigning an existing instrument.
直接替換替代品,適用於 AD526SD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD526SD (相同外形與佔位) — 差異在於 Package, Product Type.
AD526JNZ
✅ 直接替換聯絡詢價
查看資料表 →AD526JD
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD526JR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD526KD
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
AD526SD/883B
✅ 直接替換📋 參考替代品(不在目錄中)
AD526SD 最大額定值與電氣特性
| Product Type | Single-ended monolithic software-programmable gain amplifier |
| Number of Circuits | 1 circuit |
| Programmable Gain Values | 1, 2, 4, 8, and 16 |
| Input Configuration | Single-ended |
| Digital Control Interface | TTL-compatible latched inputs |
| Integrated Elements | Amplifier, resistor network, and latched digital inputs |
| External Gain-Setting Components | 0 components required |
| 封裝 | 16-CDIP |
| 安裝類型 | Through-hole |
| 腳位數 | 16 pins |
AD526SD 16-cdip 腳位配置指南
AD526SD(16-cdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD526SD.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD526SD 適用於 6 應用s: Programmable Instrumentation Front End, Data Acquisition Input Conditioning, Industrial Sensor Interface, Medical Measurement Equipment, Laboratory Multimeter Signal Path, Programmable Test and Measurement System.
Programmable Instrumentation Front End
The AD526SD fits instrumentation front ends that must accommodate changing input ranges without external switched resistors. Its programmable gains of 1, 2, 4, 8, and 16 allow a sensor signal to be scaled for an ADC while preserving one board layout. The integrated amplifier and resistor network simplify the analog path, and the latched TTL-compatible controls keep each gain setting stable while the host controller acquires a measurement. Because the device is single-ended, the source must be referenced appropriately and protected against overvoltage. The 16-CDIP format favors through-hole, laboratory, and industrial instrument designs where leaded assembly and serviceability are priorities.
推薦
Data Acquisition Input Conditioning
The AD526SD provides a compact way to condition a single-ended channel before conversion by an ADC. A host can select gains of 1, 2, 4, 8, or 16 as the input level changes, using the AD526's internal resistor network instead of external gain components. Latched control inputs make the selected ratio suitable for repeated acquisition cycles, while the single amplifier channel matches a one-signal conditioning requirement. Layout should minimize sensitive-input routing and maintain a stable reference path. The through-hole 16-CDIP package can simplify prototype construction, although production designs should verify thermal performance and environmental requirements against the manufacturer limits.
推薦
Industrial Sensor Interface
The AD526SD is appropriate for industrial sensors whose output span changes with stimulus, process condition, or sensor selection. Its five programmed gains cover a 16:1 adjustment range, allowing the same conditioning board to accommodate several signal magnitudes. The integrated network removes the need to match external feedback resistors, while TTL-compatible latched inputs can be driven by industrial digital control circuitry when electrical compatibility is confirmed. Grounding and common-mode conditions remain critical for reliable operation. Engineers should check the signal range, supply voltage, input protection, and temperature grade in the AD526 datasheet before applying the amplifier directly to a transducer output.
推薦
Medical Measurement Equipment
The AD526SD can support medical and laboratory measurement circuits that need selectable gain across a controlled input range. Gains of 1, 2, 4, 8, and 16 permit range selection without changing external resistor networks, and the integrated design reduces the number of precision components that must be matched. Because the AD526SD is a single-ended device, the medical instrumentation architecture must provide a suitable reference and input protection. The manufacturer datasheet should define the operating limits for the exact suffix, and the overall instrument must satisfy its applicable product and quality requirements rather than treating the amplifier qualification as an approval of the finished system.
推薦
Laboratory Multimeter Signal Path
The AD526SD suits laboratory instruments that measure voltage over several decades while retaining a calibrated analog path. A digital control system can select from five gains, allowing the same input network to cover a 16:1 signal range. The latched controls help prevent accidental gain changes during a measurement, and the absence of external gain-setting components simplifies instrument construction. The 16-CDIP package is particularly convenient for through-hole laboratory equipment and serviceable prototypes. Calibration procedures should include each programmed gain because resistor-network accuracy and analog offset ultimately determine instrument precision. Verify input range, settling behavior, and supply requirements from the manufacturer documentation.
推薦
Programmable Test and Measurement System
The AD526SD is useful in automated test equipment where the same input must be measured at multiple sensitivity levels. Programmable gains of 1, 2, 4, 8, and 16 allow a controller to configure attenuation or amplification for different source ranges, while the latched interface supports repeatable setup. Its monolithic resistor network reduces external component count and simplifies calibration inventory. The single-ended architecture fits sources with a defined common reference and low impedance. Layout should keep the gain-control traces away from sensitive analog inputs, and system timing should include the settling period required by the selected gain. Use the AD526 datasheet for exact switching and timing details.
推薦
推薦產品摘要
工程參考資料,適用於 AD526SD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD526JN | AD526JD | AD526JR | AD526KD | AD526SD/883B |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP | 16-CDIP |
| Programmable Gain Values | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 | 1, 2, 4, 8, and 16 |
| Digital Control Interface | TTL-compatible latched inputs | TTL-compatible latched inputs | TTL-compatible latched inputs | TTL-compatible latched inputs | TTL-compatible latched inputs | TTL-compatible latched inputs |
| External Gain Components | 0 components required | 0 components required | 0 components required | 0 components required | 0 components required | 0 components required |
| Ordering Qualification | Standard AD526SD ordering suffix | AD526JN ordering suffix | AD526JD ordering suffix | AD526JR ordering suffix | AD526KD ordering suffix | /883B qualification code |
主要差異化特點
- Complete integrated gain stage (對比AD526JN)
- Serviceable 16-CDIP implementation (對比AD526JD)
- Monolithic resistor network eliminates external gain parts (對比AD526JR)
設計說明
Route the analog input and output as short, quiet traces and connect the bypass capacitors close to their specified supply pins. Keep the TTL-compatible gain-control traces away from the sensitive input node because switching activity at the digital interface can couple into a high-impedance source. Use a solid ground reference for the entire analog path and follow the grounding configuration shown in the Analog Devices AD526 datasheet.
Do not approve a family member as a drop-in replacement solely because it is labeled AD526. Compare the complete ordering table, pin assignment, package material, temperature grade, qualification code, gain accuracy, supply range, and input limits. The AD526JN is explicitly visible in family-comparison results, while /883B denotes a separate qualification ordering code. Confirm the exact suffix before changing a released BOM or production drawing.
Command the gain only when the analog input is within a safe operating condition, and allow the circuit to settle before taking a measurement. The latched interface holds the programmed ratio, but that does not remove the device's normal settling behavior when a new gain is selected. Include the gain-switching interval in the measurement timing budget and verify it against the manufacturer timing and gain-error characteristics.
合規資訊
The AD526 is an Analog Devices mixed-signal amplifier rather than an automotive-qualified device in the standard AD526SD configuration. Exact material and environmental compliance should be confirmed for the selected orderable suffix.