Analog Devices

AD611KH/+ - 13 V/µS Operational Amplifier | Analog Devices

MPN: AD611KH/+ ✓ פעיל
Round Package
כמות הזמנה מינימלית: 1 |

AD611KH/+ סקירה

The Analog Devices AD611KH/+ is a general-purpose voltage-feedback operational amplifier featuring a 13 V/µs slew rate, eight wire terminals, and a round TO-99-8 metal-can package. The device is specified for dual power supplies of ±15 V and is identified as a commercial-temperature-grade component. Its hermetic metal-can construction and through-wire package distinguish it from modern surface-mount and plastic operational amplifiers.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. The voltage-feedback architecture used by the AD611KH/+ is commonly used with resistive negative feedback to set closed-loop gain. Because negative feedback determines signal gain, bandwidth, output swing, and stability, the amplifier must be evaluated with the same feedback network and load conditions used in the intended circuit.

The AD611KH/+ provides a slew rate of 13 V/µs, making its large-signal response faster than the slew rate of many general-purpose amplifiers. This characteristic is particularly relevant when processing moderate-amplitude step signals, waveform edges, and signals requiring low full-power-bandwidth distortion. The operating context remains important: the 13 V/µs figure describes maximum rate of change, while output swing, load capability, noise, input bias current, and stability determine whether the amplifier can realize that performance in a practical circuit.

The AD611KH/+ operates from dual supplies identified as ±15 V. This conventional supply arrangement supports bipolar input and output signal excursions around the midpoint of the supply rails. Designers must confirm the output-current capability and output-voltage swing before driving resistive, capacitive, or load-connected circuits. Decoupling capacitors should be positioned close to the device pins, and the layout should minimize feedback-loop area and sensitive-input-node capacitance.

Typical applications include analog signal conditioning, instrumentation amplifiers, active filters, waveform shaping, closed-loop amplifier stages, and laboratory or industrial measurement systems. Its 13 V/µs slew rate supports applications where edge accuracy and distortion control matter, while the TO-99-8 package remains useful for legacy systems, modular analog assemblies, and designs that use hermetic metal-can operational amplifiers.

The primary design trade-off is package practicality. The TO-99-8 package is mechanically durable and compatible with through-hole assembly, but it occupies more PCB area than a modern surface-mount package and requires manual insertion. Verify the eight-terminal pin assignment in the manufacturer datasheet before constructing a PCB or replacing an existing device.

This product record consolidates the confirmed electrical identity, package information, commercial sourcing context, application guidance, and design cautions for the AD611KH/+. It also identifies the unavailable parameters that should be checked in the manufacturer datasheet before precision, low-noise, high-current, or temperature-critical designs are released.

חלופות תחליף ישיר עבור AD611KH/+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

AD611KH/+ דירוגים מרביים ומאפיינים חשמליים

Product Type General-purpose voltage-feedback operational amplifier
Manufacturer Analog Devices
Slew Rate 13 V/µs
Power Supplies ±15 V
Temperature Grade Commercial
Terminal Form Wire
Number of Terminals 8 terminals
Package Shape Round
מארז TO-99-8 metal can
סוג הרכבה Through-hole
Feedback Architecture Voltage feedback
סטטוס RoHS Non-compliant

מדריך תצורת פינים של AD611KH/+ to-99-8 metal can

תצורת פינים עבור AD611KH/+ (מארזת to-99-8 metal can). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת to-99-8 metal can עבור AD611KH/+

אין נתוני פריסת פינים מפורטים עבור AD611KH/+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD611KH/+ מתאים עבור 6 יישוםs: Precision Closed-Loop Signal Amplification, Active Filter Stages, Instrumentation and Measurement Front Ends, Waveform Shaping and Edge Processing, Legacy Through-Hole Analog Modules, Industrial Control Signal Conditioning.

⚡

Precision Closed-Loop Signal Amplification

The AD611KH/+ is appropriate for a closed-loop gain stage in which a differential input must be amplified around a zero-volt reference. Its 13 V/µs slew rate allows the output to follow moderate step changes more rapidly than the response of a slow general-purpose amplifier, helping reduce edge distortion. The circuit should use negative feedback to establish gain, while the designer verifies input common-mode range, output swing, and load stability against the ±15 V supply arrangement before selecting resistor values.

🌐

Active Filter Stages

The AD611KH/+ can serve as the active element in analog low-pass, high-pass, or band-pass filter stages. Its 13 V/µs slew rate improves large-signal behavior in filters exposed to periodic waveform edges, while the feedback network determines the nominal response. Component tolerances and the amplifier’s gain-bandwidth interaction remain central to frequency accuracy, so simulate the complete stage and check stability with the intended load and source impedance.

🏭

Instrumentation and Measurement Front Ends

The AD611KH/+ is suitable for an instrumentation or measurement front end that amplifies a sensor-derived voltage before conversion or processing. The dual ±15 V supplies support bipolar signals around ground, and the 13 V/µs slew rate provides useful dynamic headroom for rapidly changing sensor outputs. Actual measurement accuracy still depends on input offset, input bias current, noise, common-mode limits, and resistor matching, so those characteristics must be obtained from the manufacturer datasheet.

📺

Waveform Shaping and Edge Processing

The AD611KH/+ can be used in waveform-shaping, comparator-like conditioning, or edge-processing circuits where a relatively quick output transition is valuable. Its specified 13 V/µs slew rate limits how quickly the output can follow a large step and helps distinguish this amplifier from slower general-purpose devices. Designers should account for finite output swing around the ±15 V rails and use feedback or limiting arrangements that keep the requested waveform within the amplifier’s operating range.

🔧

Legacy Through-Hole Analog Modules

The eight-terminal TO-99-8 metal-can package makes the AD611KH/+ well suited to legacy analog modules, laboratory instruments, and hand-assembled through-hole boards. The round metal can provides a mechanically distinct option from common plastic DIP operational amplifiers, but it also requires more PCB area and manual insertion. Production drawings should follow the manufacturer package dimensions and pin numbering exactly rather than relying on a generic eight-pin operational-amplifier footprint.

🏭

Industrial Control Signal Conditioning

The AD611KH/+ can condition low-level industrial signals in a controlled analog module when its electrical limits match the system requirements. Its 13 V/µs slew rate supports signals with sharper transitions, and its ±15 V supply arrangement is common in older control equipment. For factory use, evaluate noise, offset drift, common-mode range, output loading, and temperature behavior against the enclosure environment before approving a long-life production design.

What is the AD611KH/+?
The AD611KH/+ is an Analog Devices general-purpose voltage-feedback operational amplifier with a 13 V/µs slew rate in an eight-terminal TO-99-8 metal-can package. The manufacturer datasheet identifies the device for ±15 V power supplies and commercial temperature grade. It is intended for conventional closed-loop analog signal-processing circuits rather than modern low-power surface-mount designs.
What is the slew rate of the AD611KH/+?
The AD611KH/+ has a slew rate of 13 V/µs. This rate defines how rapidly its output can change in response to a sufficiently large input step. It is particularly useful for waveform edges and signal chains where slew-related distortion matters, although actual output performance also depends on output swing, load, supply voltage, and the selected feedback network.
What package does the AD611KH/+ use?
The AD611KH/+ uses a round TO-99-8 metal-can package with eight wire terminals. Its through-hole construction makes it suitable for manual PCB assembly and legacy analog modules, but the package occupies more board area than a comparable surface-mount operational amplifier. Confirm the physical dimensions and terminal numbering from the manufacturer datasheet before layout.
What supply voltage does the AD611KH/+ require?
The AD611KH/+ is specified for ±15 V power supplies. The dual-rail arrangement supports bipolar input and output signals centered around the circuit ground reference. Designers should verify input common-mode range and output swing at the actual load because the supply rating alone does not guarantee operation over the full signal range.
Where can I download the AD611KH/+ datasheet PDF?
The AD611KH/+ datasheet PDF is available through the product document link published for this part. Use the manufacturer pinout, electrical characteristics, and application information when finalizing the PCB or evaluating performance. The direct PDF link on this page opens the archived AD611KH/+ document for technical review.
Where can I find the AD611KH/+ pinout?
The AD611KH/+ pinout is identified by its eight-terminal TO-99-8 metal-can package and should be taken from the pin-description drawing in the manufacturer datasheet. Terminal functions must not be inferred solely from package orientation because the pin numbering used by this older-style metal-can package must be checked against the exact drawing before connection.
Is the AD611KH/+ suitable for active filters and signal conditioning?
The AD611KH/+ is suitable for active-filter and signal-conditioning stages when its frequency response, noise, offset, bias current, and output-drive characteristics satisfy the circuit requirements. Its 13 V/µs slew rate supports faster large-signal transitions, but a stable implementation still depends on the selected closed-loop gain, passive values, load, and physical component tolerances.
Where can I buy AD611KH/+ online?
The AD611KH/+ can be requested through the Request a Quote form on this product page. The part is identified as active and is listed with broad commercial availability, but allocation and delivery timing can change. Submit the exact manufacturer part number AD611KH/+ so the request is matched to the correct eight-terminal TO-99-8 device.
What is the price of AD611KH/+?
Current pricing for the AD611KH/+ should be obtained through the Request a Quote form on this page. The visible quote workflow reflects the condition, quantity, and market movement more effectively than a static price statement. Request the exact AD611KH/+ ordering code to avoid receiving a different grade, package, or mounting option.
What is the lead time for AD611KH/+?
The current lead time for AD611KH/+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, component condition, and inventory allocation. Including the required quantity, target delivery date, and any acceptable new or surplus condition in the request helps establish a practical supply commitment.
Is AD611KH/+ currently active?
Yes, the AD611KH/+ is listed as an active part with a commercial availability indication. Because lifecycle status can change over time, verify the manufacturer product page during each new design or long-term production planning cycle. The TO-99-8 package remains available, but it is an older mechanical style compared with current surface-mount operational amplifiers.
What is the difference between the AD611KH/+ and another operational amplifier?
The AD611KH/+ differs from modern operational amplifiers primarily in its older TO-99-8 hermetic metal-can package, eight wire terminals, and commercial temperature grade. Its 13 V/µs slew rate remains the principal confirmed dynamic characteristic. Any proposed substitute must match the pin arrangement, supply range, input and output ranges, load capability, noise, stability, and temperature requirements.
When should I choose the AD611KH/+ instead of a modern surface-mount amplifier?
Choose the AD611KH/+ when an existing through-hole design requires that exact footprint, the application benefits from its 13 V/µs slew rate, or preserving a legacy TO-99-8 assembly is more important than minimizing PCB area. For new compact designs, compare a modern surface-mount amplifier against noise, bias current, accuracy, output drive, and temperature requirements before changing technologies.
What can replace the AD611KH/+?
A valid replacement for the AD611KH/+ must match the TO-99-8 footprint, eight-terminal pin assignment, ±15 V operating capability, and the application’s closed-loop performance requirements. No drop-in replacement is established on this product page, so do not substitute an amplifier solely by matching the generic description of a general-purpose op amp. Validate the candidate against the manufacturer datasheet and existing schematic.
Is there a drop-in replacement for the AD611KH/+?
No drop-in replacement is identified for the AD611KH/+ in the available cross-reference records. A candidate should only be treated as drop-in after confirming the same TO-99-8 mechanical outline and pin-to-pin terminal functions, followed by comparison of supply range, common-mode range, output swing, slew rate, gain bandwidth, noise, offset, bias current, and temperature performance.
What are the key specifications of AD611KH/+ that engineers should know?
The confirmed AD611KH/+ specifications are a 13 V/µs slew rate, ±15 V power supplies, commercial temperature grade, eight wire terminals, and a round TO-99-8 metal-can package. According to the manufacturer datasheet, it is a general-purpose voltage-feedback operational amplifier. Obtain gain bandwidth, offset voltage, bias current, noise, common-mode range, and output-current limits from that document before release.

נתוני עזר הנדסיים עבור AD611KH/+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD611KH/+ when an existing design specifically uses the eight-terminal TO-99-8 metal-can footprint or when its 13 V/µs slew rate is useful in a through-hole signal-conditioning stage. It is particularly relevant for legacy industrial, laboratory, and modular analog systems that operate from ±15 V. Do not select it merely because a current is drawn from the same supply rails: confirm common-mode range, output swing, noise, offset, bias current, bandwidth, output drive, and stability. A modern surface-mount amplifier is usually preferable for a new compact PCB, but it requires a different footprint and may not be pin compatible. No drop-in replacement is established here; any proposed substitute must undergo package, pinout, electrical, and stability verification against the existing circuit.

השוואה עם חלופות

פרמטר מוצר זה
Brand Analog Devices
Package TO-99-8 metal can
Terminal Count 8 terminals
Mounting Type Through-hole
Feedback Architecture Voltage feedback
Slew Rate 13 V/µs
Power Supplies ±15 V
Temperature Grade Commercial

מבדילים עיקריים

  • Through-hole hermetic-style mechanical package (לעומתAD611KH/+)
  • Clearly identified general-purpose performance (לעומתAD611KH/+)
  • Conventional dual-rail operation (לעומתAD611KH/+)

הערות תכנון

Place the supply-decoupling capacitors close to the appropriate device pins and keep their ground returns short. Route the high-impedance input node before the feedback resistors, because parasitic capacitance at that node can reduce phase margin and alter the closed-loop response. Use a low-impedance ground reference and avoid long loops between the amplifier, its feedback network, and bypass capacitors.

Do not treat any operational amplifier with an eight-terminal metal can as an automatic substitute for the AD611KH/+. Before replacement, confirm the TO-99-8 mechanical outline, terminal numbering, input and output assignments, supply pins, common-mode range, and output swing. Also compare noise, offset voltage, bias current, unity-gain bandwidth, slew rate, and stability with the existing feedback network and load.

Use the AD611KH/+ within its identified ±15 V dual-supply arrangement and provide local bypassing at the device. When calculating allowable output excursion, include transistor headroom, load-related output shift, and signal overshoot rather than treating the supply rails as exact clipping limits. The confirmed 13 V/µs slew rate defines a rate of change, not the maximum output voltage or output-current capability.

מידע על תאימות

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The RoHS status is listed as non-compliant for this metal-can package. Other environmental and material-compliance fields are unknown and require confirmation with the manufacturer.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD611KH/+ datasheet AD611KH/+ pinout AD611KH/+ TO-99-8 AD611KH/+ 13 V/us AD611KH/+ operational amplifier Analog Devices AD611KH/+ AD611KH/+ replacement AD611KH/+ equivalent AD611KH/+ cross reference AD611KH/+ price AD611KH/+ stock AD611KH/+ application circuit

רכיבים ומונחים קשורים

Analog Devices AD611KH/+ AD611KH operational amplifier voltage-feedback amplifier general-purpose op amp analog integrated circuit signal conditioning active filter closed-loop gain negative feedback slew rate 13 V/µs ±15 V TO-99-8 metal-can package eight-terminal package through-hole mounting commercial temperature grade RoHS
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר