Analog Devices

AD621BNZ Low-Power Instrumentation Amplifier | Analog Devices

MPN: AD621BNZ ✓ פעיל
±2.3 V to ±18 V Vdss 1 nA listed for AD621BNZ comparison Id 8-pin PDIP Package
כמות הזמנה מינימלית: 1 |

AD621BNZ סקירה

The Analog Devices AD621BNZ is a single-circuit, low-power instrumentation amplifier with a specified gain of 10 or 100, packaged in an 8-pin PDIP. It is designed for precision differential-signal measurement where a low-cost, integrated solution is preferred over discrete operational-amplifier networks. The AD621 combines low offset voltage of 125 µV, a typical bandwidth of 800 kHz, a typical slew rate of 1.2 V/µs, and a common-mode rejection specification listed at 120 dB to 130 dB, depending on the cited comparison condition.

An instrumentation amplifier is a specialized amplifier category that converts a small differential signal into a single-ended or otherwise referenced output. Its internal topology provides differential input handling, high input impedance, and common-mode rejection while reducing the number of external precision resistors required. The AD621 uses internal resistor ratios for selectable gains of 10 and 100, with pin-strappable gain options and an output-reference connection for systems requiring an offset reference.

The AD621 is specified for low power and low drift, making it suitable for battery-powered instrumentation, industrial measurement systems, and sensor interfaces. Its operating supply range is listed from ±2.3 V to ±18 V, allowing operation from low-voltage bipolar rails as well as higher-voltage analog systems. The 800 kHz bandwidth provides useful signal bandwidth for pressure, temperature, strain, and other slowly varying sensor-front-end applications.

The instrument-amplifier architecture improves rejection of common-mode signals before they reach the output, while the internal gain-setting arrangement helps reduce board area and resistor-count requirements. The 8-pin PDIP format is useful for through-hole prototyping, laboratory instruments, and legacy industrial equipment where surface-mount assembly is unnecessary. The device is available in a single-amplifier configuration, allowing a compact analog signal chain.

Typical uses include bridge-amplifier interfaces, pressure and load-cell signal conditioning, biomedical instrumentation, industrial process monitoring, and low-level differential sensor measurement. The reference pin supports output shifting when a downstream converter or ADC requires a nonzero reference voltage. Designers should verify gain configuration, supply polarity, reference voltage, and output swing against the manufacturer datasheet before finalizing a board.

For a stable implementation, keep the differential input path short, provide adequate bypass capacitance close to the supply pins, and route the reference connection according to the datasheet’s reference-return guidance. Confirm output-voltage headroom for the selected gain and input common-mode range. This page combines the manufacturer product information, distributor availability information, comparison data, and practical design guidance to support component selection and PCB implementation.

חלופות תחליף ישיר עבור AD621BNZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD621BNZ (אותו גורם צורה וטביעת רגל) — שונים ב Bandwidth, Input Offset Voltage, Slew Rate.

Analog Devices
Bandwidth: 1 MHz
Input Offset Voltage: 15 µV
Slew Rate: 1.2 V/µs
השווה עם AD621BNZ →

AD621BN

✅ Drop-In
📦 PDIP-8
AD621BN is the related 8-pin PDIP orderable variant; suffix-specific temperature grade and qualification must be confirmed.

📋 חלופה להתייחסות (לא בקטלוג)

AD621AN

✅ Drop-In
📦 PDIP-8
AD621AN uses the same AD621 instrumentation-amplifier family with comparable gain options, while grade and suffix specifications require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

AD621AR

✅ Drop-In
Analog Devices
📦 PDIP-8
Single-channel instrumentation amplifier · Analog Devices · 8-SOIC · 1 circuit · Integrated three-op-amp instrumentation-amplifier architecture · Low power · Low drift · High accuracy

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD621SQ/883B

✅ Drop-In
📦 PDIP-8
AD621SQ/883B is a qualified AD621 family variant with 130 dB CMRR listed in comparison data versus 120 dB for AD621BNZ.

📋 חלופה להתייחסות (לא בקטלוג)

AD620BNZ

✅ Drop-In
Analog Devices
📦 PDIP-8
Instrumentation Amplifier · 1 circuit · 1 to 10,000 · 1 external resistor · 15 µV · 1.2 V/µs · 1 MHz · ±2.3 V to ±18 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD621BNZ דירוגים מרביים ומאפיינים חשמליים

Product Type Instrumentation amplifier
Number of Amplifiers 1 circuit
Supply Voltage Range ±2.3 V to ±18 V
מארז 8-pin PDIP
Input Offset Voltage 125 µV typical
Bandwidth 800 kHz typical
Slew Rate 1.2 V/µs typical
Common-Mode Rejection Ratio 120 dB to 130 dB, condition dependent
Gain 10 or 100, pin-strappable
סוג פלט Single-ended
Input Bias Current 1 nA listed for AD621BNZ comparison
Operating Voltage ±2.3 V to ±18 V
Internal Gain Setting Internal resistor gain
ESD Protection Yes
סוג הרכבה Through-hole
סטטוס RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

תצורת פינים של AD621BNZ

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
פין 1 RG — Gain-setting resistor connection
פין 2 -IN — Inverting differential input
פין 3 +IN — Non-inverting differential input
פין 4 V- — Negative supply connection
פין 5 REF — Output reference connection
פין 6 OUT — Single-ended amplifier output
פין 7 V+ — Positive supply connection
פין 8 RG — Gain-setting resistor connection

יישומים טיפוסיים

AD621BNZ מתאים עבור 6 יישוםs: Load-Cell and Strain-Gauge Signal Conditioning, Industrial Pressure Sensor Interface, Battery-Powered Biomedical Sensor Interface, Bridge-Based Temperature Measurement, Precision Current-Shunt Measurement, Low-Level Differential Data Acquisition.

🏭

Load-Cell and Strain-Gauge Signal Conditioning

The AD621BNZ fits low-level differential strain-gauge and load-cell front ends because its 125 µV typical input offset limits signal error while the internally selectable gains of 10 and 100 support common transducer sensitivities. Its instrumentation-amplifier architecture rejects common-mode excitation voltage before amplification, reducing the number of matched precision resistors required around the input stage. The 800 kHz bandwidth is suitable for typical force, pressure, and weight signals that do not require kilohertz measurement bandwidth. Designers should confirm that the bridge excitation, input common-mode voltage, and output target remain inside the AD621 electrical limits, and should return the reference connection to a quiet analog ground when no output offset is required.

🏭

Industrial Pressure Sensor Interface

The AD621BNZ is appropriate for industrial pressure transmitters that produce a small differential voltage across a resistive bridge or sensor element. A typical input offset of 125 µV and gains of 10 or 100 preserve useful signal integrity before the signal reaches an ADC or transmitter driver, while the common-mode rejection helps isolate the sensor output from equipment-ground disturbances. The ±2.3 V to ±18 V supply range supports both compact low-voltage analog systems and higher-voltage bipolar instrumentation. Care is needed to maintain the bridge excitation return within the input common-mode range and to provide sufficient output-voltage headroom. Short input traces, local supply bypassing, and a controlled reference net help preserve accuracy in long industrial cable environments.

💊

Battery-Powered Biomedical Sensor Interface

The AD621BNZ supports low-voltage biomedical and wearable sensor interfaces because Analog Devices describes the AD621 as a low-power, low-cost instrumentation amplifier and specifies operation from ±2.3 V to ±18 V. Selectable gains of 10 and 100 can amplify small differential electrode or resistive-sensor outputs without requiring a large external resistor network. The 125 µV typical offset is important when the useful sensor signal is only millivolts, while common-mode rejection helps reject signals shared by both inputs. The design must still account for patient-signal safety, input protection, electrode biasing, and isolation requirements; the amplifier itself does not provide those protections. Confirm supply current, noise density, and common-mode behavior in the manufacturer datasheet for the intended operating condition.

🌡️

Bridge-Based Temperature Measurement

The AD621BNZ can condition the small differential output of a resistive temperature bridge where millivolt-level changes must be amplified without adding excessive offset or gain error. The internal gains of 10 and 100 simplify initial bring-up, while 800 kHz bandwidth comfortably accommodates slow thermal signals and the switching ripple filtering commonly placed ahead of the amplifier. Its low-drift, low-power positioning supports portable or multi-channel thermal monitoring systems. Use a quiet reference return and place input and bypass components close to the device to minimize thermoelectric and pickup effects. The engineer should also verify output swing, allowable input common-mode voltage, and whether the downstream ADC requires a unipolar or bipolar input range.

⚡

Precision Current-Shunt Measurement

The AD621BNZ is useful for measuring small voltage drops across a shunt when the source is floating or shares ground noise with an ADC. The differential input architecture reduces common-mode error, and selectable gains of 10 or 100 allow the shunt voltage to be scaled efficiently for conversion. Its 125 µV typical input offset sets an important sensitivity limit for very small shunt drops. Layout should use a Kelvin connection to the shunt so input current does not create voltage errors in the routing copper. The common-mode voltage at the shunt must remain within the input range, and the output must maintain sufficient swing around the selected reference voltage. For faster transients, verify the actual signal bandwidth and output settling against the 800 kHz device bandwidth.

📟

Low-Level Differential Data Acquisition

The AD621BNZ fits laboratory and industrial data-acquisition modules that must amplify a low-level differential sensor signal before an ADC. Its single-ended output can connect to a unipolar converter through an appropriate reference bias, while 800 kHz bandwidth provides margin for many general-purpose sensor channels. The low typical input offset of 125 µV and common-mode rejection listed up to 130 dB help improve conversion accuracy when the source is noisy or unbalanced. Designers should select a reference voltage with low noise, bypass each supply rail locally, and avoid routing the differential pair through switching-converter regions. If the source impedance is high, account for bias-current effects and input settling in the system timing budget.

סיכום מוצרים מומלצים

AD620BNZ Analog Devices בשימוש ב-: Load-Cell and Strain-Gauge Signal Conditioning, Bridge-Based Temperature Measurement AD621BN Related AD621 family ordering variant בשימוש ב-: Load-Cell and Strain-Gauge Signal Conditioning, Industrial Pressure Sensor Interface, Battery-Powered Biomedical Sensor Interface, Precision Current-Shunt Measurement, Low-Level Differential Data Acquisition AD621AN Related AD621 instrumentation-amplifier ordering option בשימוש ב-: Industrial Pressure Sensor Interface, Battery-Powered Biomedical Sensor Interface AD621BNZ Analog Devices בשימוש ב-: Bridge-Based Temperature Measurement AD621AR Related AD621 family precision amplifier בשימוש ב-: Precision Current-Shunt Measurement AD621SQ/883B Qualified AD621 family variant בשימוש ב-: Low-Level Differential Data Acquisition
What is the AD621BNZ?
The AD621BNZ is a single-circuit, low-power instrumentation amplifier from Analog Devices in an 8-pin PDIP package. According to the Analog Devices product page, it combines selectable gains of 10 and 100 with low offset, low drift, and low power consumption. The device is intended for low-level differential-signal measurement and can replace a discrete operational-amplifier instrumentation network.
What is the operating voltage range of AD621BNZ?
The AD621BNZ operates from ±2.3 V to ±18 V. The distributor specification listing identifies the same supply range for the instrumentation amplifier. This allows the device to work with low-voltage bipolar analog rails as well as wider bipolar systems. The supply voltage, common-mode range, and output swing should still be checked together before the circuit is finalized.
What are the key specifications of AD621BNZ?
The AD621BNZ provides a typical input offset voltage of 125 µV, 800 kHz bandwidth, 1.2 V/µs slew rate, and pin-strappable gains of 10 and 100. The Analog Devices AD621 product information describes it as a low-cost, low-power, high-accuracy instrumentation amplifier. It uses a single amplifier circuit in an 8-pin PDIP package.
How do I set the gain on the AD621BNZ?
The AD621BNZ offers selectable gains of 10 and 100 using its internal gain-setting arrangement and pin-strappable options. According to the AD621 product information, the gain is implemented internally rather than requiring a full discrete resistor network. Use the manufacturer pin description and gain-selection guidance when assigning the PCB connections.
Where can I download the AD621BNZ datasheet PDF?
The manufacturer AD621 product page is the primary location for the AD621BNZ datasheet and product information. The AD621BNZ is an 8-pin PDIP orderable variant of the AD621 family. The manufacturer page also provides the electrical characteristics, pin information, and application guidance needed for schematic capture and PCB design.
Where can I find the AD621BNZ pinout?
The AD621BNZ pinout is documented in the Analog Devices AD621 datasheet and manufacturer product page. The 8-pin PDIP device uses the standard instrumentation-amplifier arrangement, including differential inputs, supply pins, gain-setting pins, reference, and output. Verify pin numbering against the package drawing before assigning PCB tracks.
Can AD621BNZ be used for pressure sensor and load-cell amplifiers?
Yes, the AD621BNZ is suitable for pressure-sensor and load-cell interfaces because it amplifies small differential signals while rejecting common-mode voltage. Its 125 µV typical input offset and selectable gains of 10 or 100 help preserve measurement integrity. The application circuit must also satisfy the input common-mode range and output swing requirements.
What is the difference between AD621BNZ and AD621BN?
The AD621BNZ and AD621BN are closely related Analog Devices orderable variants in the AD621 family, and the distributor information identifies both as 8-pin PDIP instrumentation-amplifier devices. The suffix distinction can affect ordering, packaging, temperature grade, or qualification. Confirm the exact suffix on the manufacturer product page before treating one as a production substitute.
Is AD621BNZ suitable for low-voltage battery instrumentation?
The AD621BNZ is suitable for low-voltage instrumentation because its listed supply range begins at ±2.3 V and the manufacturer describes it as low power. This supports battery-powered sensor interfaces when the signal levels remain inside the input common-mode range. The actual current consumption and battery-life impact should be taken from the AD621 datasheet.
What is the best drop-in replacement for AD621BNZ?
The closest same-family alternatives are the AD621BN, AD621AN, AD621AR, and AD621SQ/883B variants, but suitability depends on package, grade, and qualification requirements. For a guaranteed PCB substitution, compare the exact pinout, supply range, gain implementation, and ordering suffix. Use the Request a Quote form on this page when requesting the current source and lead time.
Can AD620BNZ replace AD621BNZ?
AD620BNZ is a related 8-pin instrumentation-amplifier family member, but it is not automatically interchangeable with AD621BNZ. The AD620 family commonly uses an external gain-setting resistor, whereas the AD621 offers internally selectable gains of 10 and 100. Confirm the complete pin function and gain network in the manufacturer datasheet before using it as a replacement.
How much does AD621BNZ cost?
The current commercial terms for AD621BNZ should be requested through the Request a Quote form on this page. The structured pricing fields track the exact orderable MPN and are updated independently of the technical description. Request the quantity, delivery schedule, and required packaging details with the quotation request.
What is the lead time for AD621BNZ?
The current lead time for AD621BNZ depends on manufacturer inventory, order quantity, and the confirmed orderable suffix. Submit the MPN and required quantity through the Request a Quote form on this page to obtain the latest availability and delivery schedule. Distributor snippets indicate stock activity for the part, but that should not be treated as a firm allocation.
Is AD621BNZ in stock?
AD621BNZ availability changes with order quantity and supplier inventory. The Request a Quote form on this page is the appropriate route for a current stock confirmation for the exact AD621BNZ orderable code. When requesting a quotation, specify the required quantity, tube packaging, and target delivery date.
What should I consider when comparing AD621BNZ with alternatives?
Compare AD621BNZ alternatives by exact package, pin function, gain configuration, supply range, offset voltage, bandwidth, CMRR, input bias current, and qualification grade. The AD621BNZ offers 125 µV typical input offset, 800 kHz bandwidth, 1.2 V/µs slew rate, and internally selectable gains of 10 or 100. A footprint match alone does not guarantee electrical equivalence.

נתוני עזר הנדסיים עבור AD621BNZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose AD621BNZ for low-level differential measurement when an 8-pin PDIP, internally selectable gains of 10 and 100, 125 µV typical input offset, and 800 kHz bandwidth are appropriate. AD621BN is the first same-family option to investigate when the exact suffix, temperature grade, or qualification requirements differ. AD621AN and AD621AR may suit other ordering or production requirements, but their suffix-level electrical specifications and package details must be confirmed. AD621SQ/883B is the preferred candidate when the design requires its listed qualification and 130 dB CMRR advantage. AD620BNZ is suitable only when the gain network can be changed or already matches the AD620 external-resistor arrangement. For every candidate, verify supply range, common-mode range, output swing, reference behavior, and exact PCB footprint before release.

השוואה עם חלופות

פרמטר מוצר זה AD621BN AD621AN AD621AR AD621SQ/883B AD620BNZ
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier Instrumentation amplifier
Number of Amplifiers 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Gain Configuration Internally selectable gains of 10 and 100 Internally selectable gains of 10 and 100 Internally selectable gains of 10 and 100 Internally selectable gains of 10 and 100 Internally selectable gains of 10 and 100 External resistor gain setting
Output Type Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended

מבדילים עיקריים

  • Internally selectable gain options simplify the feedback network (לעומתAD620BNZ)
  • Lower input bias current than the cited AD621AR comparison (לעומתAD621AR)
  • Higher listed CMRR in the qualified AD621 family comparison (לעומתAD621SQ/883B)

הערות תכנון

Route the two differential inputs as a compact pair and keep them away from switching-converter inductors, relay contacts, and high-current return paths. Place the input-side components at the source connector and use a continuous ground reference beneath the pair where practical. The 125 µV typical input offset means that copper thermoelectric effects and leakage can become relevant in precision measurements, particularly across large temperature changes.

Place the supply bypass capacitor directly between the V+ and V- pins and connect its return to the device ground reference with minimal loop area. The AD621BNZ supports ±2.3 V to ±18 V, but the usable signal range depends on the selected supply, common-mode input voltage, gain, and output swing. Do not choose the supply from the maximum rating alone; check the manufacturer operating characteristic curves for the actual gain and load condition.

Do not treat AD620BNZ as an automatic substitute for AD621BNZ. The AD621 provides internally selectable gains of 10 and 100, whereas the AD620 family normally uses an external gain-setting resistor. Confirm the gain pins, reference connection, supply limits, and output range against the exact manufacturer pin table before revising a PCB or replacing the device in an existing design.

For shunt and high-impedance sensor measurements, use Kelvin routing and avoid sharing narrow input traces with guard or reference currents. Bias-current error and input-capacitance settling can matter even when the 800 kHz bandwidth appears sufficient. Add input protection only after checking its leakage, capacitance, and effect on source impedance. Keep the reference node quiet and determine whether it should connect to analog ground or a low-impedance bias source.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The AD621 family is for general-purpose instrumentation-amplifier applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable suffix.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD621BNZ datasheet AD621BNZ pinout AD621BNZ datasheet pdf AD621BNZ equivalent AD621BNZ replacement AD621BNZ vs AD620BNZ AD621BNZ instrumentation amplifier AD621BNZ 800kHz bandwidth AD621BNZ ±18V supply AD621BNZ DIP-8 AD621BNZ pressure sensor amplifier AD621BNZ load cell interface AD621BNZ price AD621BNZ stock Analog Devices AD621BNZ

רכיבים ומונחים קשורים

Analog Devices AD621BNZ AD621 AD621BN AD621AN AD621AR AD621SQ/883B AD620BNZ instrumentation amplifier differential amplifier analog signal conditioning common-mode rejection ratio CMRR input offset voltage input bias current gain slew rate bandwidth PDIP-8 through-hole package load-cell amplifier pressure sensor interface strain gauge biomedical instrumentation single-ended output
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר