AD8628ARTZ-REEL7 - Zero-Drift Op Amp | Analog Devices
MPN: AD8628ARTZ-REEL7 ✓ פעילAD8628ARTZ-REEL7 סקירה
A zero-drift amplifier is a type of operational amplifier that uses auto-zeroing or chopper-stabilization techniques to continuously correct offset voltage and drift. This makes it ideal for applications where DC precision is critical, such as sensor signal conditioning, precision current sensing, and medical instrumentation. Zero-drift amplifiers belong to the broader category of precision operational amplifiers, which are essential building blocks in analog signal processing chains.
Key features of the AD8628 include an ultralow offset voltage of 1 µV (typical), offset drift of 0.02 µV/°C, and bias current of 30 pA (typical). It provides a gain bandwidth product of 2.5 MHz and a slew rate of 1 V/µs. The amplifier operates over the extended industrial temperature range of -40°C to +125°C and is fully specified for single-supply operation from 2.7 V to 5.5 V.
The AD8628 uses a proprietary auto-zero topology that eliminates the need for an external capacitor, reducing digital switching noise compared to traditional chopper-stabilized amplifiers. This results in low noise performance and high DC accuracy without the complexity of external components. The rail-to-rail input and output stages allow maximum dynamic range in low-voltage applications.
Typical applications include precision sensor interfaces, thermocouple and RTD signal conditioning, battery-powered instrumentation, and medical devices such as glucose monitors and pulse oximeters. The low power consumption and small package make it suitable for portable and space-constrained designs.
When designing with the AD8628, ensure proper power supply decoupling with 0.1 µF ceramic capacitors placed close to the supply pins. The auto-zero architecture provides excellent DC performance, but for AC-coupled applications, consider the amplifier's bandwidth and noise characteristics.
חלופות תחליף ישיר עבור AD8628ARTZ-REEL7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם AD8628ARTZ-REEL7 (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Package, Number of Channels, Operating Temperature Range, Slew Rate.
AD8605ARTZ-REEL7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
OPA188AIDBVT
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MCP6V11T-E/OT
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
AD8628ARTZ-REEL7 דירוגים מרביים ומאפיינים חשמליים
| Number of Channels | 1 |
| Supply Voltage - Single | 2.7 V to 5.5 V |
| Supply Voltage - Dual | ±1.35 V to ±2.75 V |
| Offset Voltage | 1 µV (typical) |
| Offset Drift | 0.02 µV/°C |
| Bias Current | 30 pA (typical) |
| Gain Bandwidth Product | 2.5 MHz |
| Slew Rate | 1 V/µs |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| טווח טמפרטורת פעולה | -40°C to +125°C |
| מארז | SOT-23-5 |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| Amplifier Type | Zero-Drift |
תצורת פינים של AD8628ARTZ-REEL7
| פין 1 | OUT — Output |
| פין 2 | V- — Negative supply (ground in single-supply) |
| פין 3 | +IN — Non-inverting input |
| פין 4 | -IN — Inverting input |
| פין 5 | V+ — Positive supply |
יישומים טיפוסיים
AD8628ARTZ-REEL7 מתאים עבור 6 יישוםs: Precision Sensor Signal Conditioning, Medical Instrumentation, Battery-Powered Instrumentation, Thermocouple and RTD Signal Conditioning, Precision Current Sensing, Active Filter and Buffer Circuits.
Precision Sensor Signal Conditioning
The AD8628ARTZ-REEL7's ultralow offset voltage (1 µV) and drift (0.02 µV/°C) ensure accurate amplification of small sensor signals without calibration. Its rail-to-rail input and output maximize dynamic range in single-supply systems. The auto-zero architecture eliminates offset errors over temperature, making it ideal for bridge sensors, thermocouples, and RTDs. With a bias current of 30 pA, it minimizes loading on high-impedance sensors. The 2.5 MHz bandwidth supports moderate-speed sensing applications. For best performance, use a 0.1 µF decoupling capacitor close to the supply pins.
מומלץ
Medical Instrumentation
In medical devices like glucose monitors and pulse oximeters, the AD8628ARTZ-REEL7 provides the precision and low power required for battery-operated equipment. Its 1 µV offset and 30 pA bias current ensure accurate measurement of tiny physiological signals. The small SOT-23-5 package fits space-constrained designs. Operating from 2.7 V to 5.5 V, it is compatible with standard battery voltages. The extended temperature range (-40°C to +125°C) ensures reliability in clinical environments. Proper PCB layout with ground planes and decoupling is essential for noise performance.
מומלץ
Battery-Powered Instrumentation
The AD8628ARTZ-REEL7's low supply current (typical 1 mA) and wide supply range (2.7 V to 5.5 V) make it ideal for portable instruments. Its rail-to-rail output allows full-scale output even at low supply voltages, maximizing battery life. The auto-zero feature maintains accuracy as the battery discharges. The small SOT-23-5 package minimizes board space. For extended battery life, consider powering down the amplifier when not in use, as the AD8628 has no shutdown pin. Use low-leakage capacitors for input filtering to preserve accuracy.
מומלץ
Thermocouple and RTD Signal Conditioning
The AD8628ARTZ-REEL7 is well-suited for thermocouple and RTD conditioning due to its ultra-low offset and drift. A thermocouple produces only microvolt-level signals, and the 1 µV offset ensures minimal error. The 0.02 µV/°C drift prevents temperature-induced inaccuracies. The 30 pA bias current reduces self-heating errors in RTDs. The rail-to-rail input allows direct connection to the sensor without level shifting. For cold-junction compensation, pair with a temperature sensor and ADC. The 2.5 MHz bandwidth is sufficient for slow temperature changes.
מומלץ
Precision Current Sensing
The AD8628ARTZ-REEL7 can amplify small voltages across shunt resistors for current sensing. Its low offset voltage (1 µV) allows accurate measurement of low currents. The rail-to-rail input and output enable sensing at both supply rails. The 2.5 MHz bandwidth supports fast current transients. The auto-zero feature eliminates offset drift over temperature, crucial for long-term monitoring. For high-side sensing, ensure the input common-mode range is respected. Use a precision shunt resistor with low temperature coefficient for best accuracy.
מומלץ
Active Filter and Buffer Circuits
The AD8628ARTZ-REEL7 can be used in active filters and buffer circuits where DC accuracy is important. Its 2.5 MHz gain bandwidth allows implementation of low-pass filters up to a few hundred kHz. The rail-to-rail output provides maximum signal swing. The low offset and drift ensure accurate DC levels in filters. The auto-zero architecture reduces 1/f noise, beneficial for low-frequency filters. For higher-order filters, multiple stages can be cascaded. Ensure stability by using appropriate feedback capacitors and resistors.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור AD8628ARTZ-REEL7 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | AD8628ARZ-REEL7 | AD8629ARZ-REEL7 | AD8605ARTZ-REEL7 | ADA4522-1ARZ-RL7 | OPA188AIDBVT | MCP6V11T-E/OT |
|---|---|---|---|---|---|---|---|
| Package | SOT-23-5 | SOIC-8 | SOIC-8 | SOT-23-5 | SOIC-8 | SOT-23-5 | SOT-23-5 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Microchip Technology |
| Offset Voltage | 1 µV | 1 µV | 1 µV | 50 µV | 1.5 µV | 25 µV | 2 µV |
| Offset Drift | 0.02 µV/°C | 0.02 µV/°C | 0.02 µV/°C | 0.5 µV/°C | 0.015 µV/°C | 0.03 µV/°C | 0.05 µV/°C |
| Bias Current | 30 pA | 30 pA | 30 pA | 1 pA | 50 pA | 160 pA | 1 pA |
| Gain Bandwidth Product | 2.5 MHz | 2.5 MHz | 2.5 MHz | 10 MHz | 5.5 MHz | 2 MHz | 1 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 4.5 V to 36 V | 4 V to 36 V | 1.8 V to 5.5 V |
| Rail-to-Rail I/O | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
מבדילים עיקריים
- Ultralow offset voltage of 1 µV (לעומתAD8605ARTZ-REEL7)
- Near-zero offset drift of 0.02 µV/°C (לעומתOPA188AIDBVT)
- Auto-zero topology with no external capacitor (לעומתMCP6V11T-E/OT)
הערות תכנון
The AD8628ARTZ-REEL7 operates from 2.7 V to 5.5 V single supply. Use a 0.1 µF ceramic capacitor close to the V+ pin and a 10 µF bulk capacitor for low-frequency decoupling. For dual-supply operation, ensure both supplies are properly decoupled to ground. The amplifier's quiescent current is typically 1 mA, so power dissipation is minimal, but consider thermal effects in high-temperature environments.
For optimal performance, place the AD8628ARTZ-REEL7 on a PCB with a solid ground plane. Keep input traces short and shielded to minimize noise pickup. Use guard rings around the input pins to reduce leakage currents, especially in high-impedance sensor applications. The SOT-23-5 package has a thermal pad; connect it to the ground plane for better heat dissipation.
Avoid exceeding the absolute maximum supply voltage of 6 V. The auto-zero architecture eliminates the need for an external capacitor, but ensure the input common-mode voltage stays within the specified range. For AC-coupled applications, be aware of the amplifier's bandwidth and noise. Do not leave unused inputs floating; tie them to a suitable voltage.
מידע על תאימות
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified.
