Analog Devices

AD976AARSZ - 16-Bit 200 kSPS ADC | Analog Devices

MPN: AD976AARSZ ✓ פעיל
5 V Vdss 28-pin SSOP Package
כמות הזמנה מינימלית: 1 |

AD976AARSZ סקירה

The Analog Devices AD976AARSZ is a 16-bit, single-channel, successive-approximation analog-to-digital converter operating from a single 5 V supply and delivering a throughput rate of 200 kSPS. The device is packaged in a 28-pin SSOP and uses a high-speed parallel output interface. These characteristics make it suitable for precision signal acquisition, industrial control, instrumentation, communications, and test equipment requiring moderate conversion speed with 16-bit resolution.

An ADC is a data-acquisition IC that converts an analog input voltage into a digital number. The AD976A belongs to the successive-approximation ADC category, where an internal sample-and-hold circuit, comparator, and switched-capacitor conversion network determine the final 16-bit code. The AD976A combines this conversion mechanism with a parallel digital interface, allowing acquired samples to be read directly by a digital processor, field-programmable logic, or data-capture system.

Key features of the AD976AARSZ include 16-bit resolution, a maximum throughput of 200 kSPS, single 5 V operation, an internal 2.5 V reference, and a parallel output interface. According to the Analog Devices AD976A product information, the converter uses Analog Devices' proprietary BiCMOS process, combining high-performance bipolar devices with CMOS circuitry. Factory calibration minimizes the need for external offset and gain correction in many applications.

The AD976A is related to the AD976 family, but the AD976A has the higher 200 kSPS throughput rate. The manufacturer describes the AD976A as a high-speed, low-power converter, with maximum dissipation listed at 100 mW for the AD976/AD976A family. Its internal reference simplifies system design by removing the need for an external reference source, while the parallel interface requires careful attention to output timing and data-acquisition setup.

Typical uses include closed-loop industrial control, analog sensor interfaces, waveform capture, process monitoring, communications receivers, and laboratory instrumentation. The 16-bit code width provides 65,536 digital output levels, while the 200 kSPS rate supports sampling of relatively slow or medium-bandwidth signals rather than high-definition video or high-frequency radar waveforms.

When laying out a circuit, treat the analog input and digital output paths as separate domains. Place input and reference decoupling capacitors close to their associated pins, route the 16-bit parallel bus over controlled-length traces, and terminate unused digital inputs consistently. The manufacturer datasheet pin-description table should be used when assigning PCB nets and checking the 28-pin SSOP land pattern.

This page combines the manufacturer specifications with practical interface guidance, verified distributor availability information, a package-matched comparison, and design notes focused on decoupling, grounding, and parallel-bus implementation. These engineering details help shorten evaluation time when the AD976AARSZ is being considered for a new 16-bit acquisition channel.

חלופות תחליף ישיר עבור AD976AARSZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם AD976AARSZ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Converter Type, Output Interface, Reference Selection.

Analog Devices
Package: 28-pin SOIC, wide body
Reference Selection: Internal or external
השווה עם AD976AARSZ →
Analog Devices
Package: 28-lead SSOP
Converter Type: 16-bit successive-approximation ADC
Output Interface: High-speed parallel
השווה עם AD976AARSZ →

AD976ABRZ

✅ Drop-In
Analog Devices
📦 28-pin SSOP
Successive-approximation ADC · 16 bit · 200 kSPS · 1 input · 5 V · ±10 V · 2.5 V · Internal or external

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

AD976AARSZ דירוגים מרביים ומאפיינים חשמליים

Converter Type Successive-approximation ADC
רזולוציה 16 bit
Number of Channels 1 channel
Throughput Rate 200 kSPS
מתח אספקה 5 V
Internal Reference Voltage 2.5 V
Output Interface Parallel
Process Technology BiCMOS
Maximum Power Dissipation 100 mW
מארז 28-pin SSOP
סוג הרכבה Surface mount
סטטוס RoHS Compliant

מדריך תצורת פינים של AD976AARSZ 28-pin ssop

תצורת פינים עבור AD976AARSZ (מארזת 28-pin ssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-pin ssop עבור AD976AARSZ

אין נתוני פריסת פינים מפורטים עבור AD976AARSZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

AD976AARSZ מתאים עבור 6 יישוםs: Industrial Process Control, Precision Sensor Acquisition, Laboratory Instrumentation, Communications Receiver, Waveform and Data Capture, Power and Motor Control.

🏭

Industrial Process Control

The AD976AARSZ fits closed-loop industrial control and process-monitoring channels that require 16-bit data at up to 200 kSPS. Its single 5 V supply and internal 2.5 V reference reduce the number of support components around the converter, while the parallel interface can connect directly to control logic. Use it where the sampled bandwidth is moderate rather than high-definition video. Place analog and digital return paths carefully because switch-node coupling can corrupt low-order codes even when the converter itself operates within specification.

🧩

Precision Sensor Acquisition

The AD976AARSZ is suitable for digitizing outputs from pressure, temperature, position, and bridge-based sensors where 16-bit resolution improves the representation of small analog changes. The 200 kSPS throughput allows rapid sampling, while the internal 2.5 V reference simplifies systems that do not require an external precision reference. Keep the sensor excitation and converter return paths separate from digital switching currents to preserve code stability in the least-significant bits.

🔧

Laboratory Instrumentation

Laboratory measurement equipment can use the AD976AARSZ for moderate-rate analog front ends, calibration loops, and stimulus-response systems. The 16-bit code width supports detailed measurement records, and the parallel interface supports direct capture by programmable logic. The design should separate the analog input from the parallel output and clock circuitry, provide local bypass capacitance, and validate timing against the receiving device before increasing sample throughput.

🌐

Communications Receiver

The AD976AARSZ can serve as the conversion stage in communications equipment that must recover a moderate-bandwidth analog signal into digital form. Its 200 kSPS rate is appropriate for baseband or intermediate-frequency channels that do not require multi-megahertz sampling, and the parallel output presents each converted word to digital signal-processing logic. Apply the manufacturer input-range requirements and avoid routing high-energy digital nets beside the analog input.

📺

Waveform and Data Capture

The AD976AARSZ supports compact waveform-capture and repetitive-sampling systems where 16-bit records are more valuable than very high sample rates. The parallel interface allows acquired samples to be stored in external logic or memory, while the single 5 V supply simplifies portable instrument power designs. Ensure the receiving logic can accept the converter's output timing and use controlled trace routing to prevent data corruption during simultaneous switching.

⚡

Power and Motor Control

The AD976AARSZ can be evaluated for power-monitoring and motor-control feedback paths that need faster and more detailed measurements than a low-resolution control ADC. Its 16-bit resolution captures small changes in voltage, current, or position feedback, and the 200 kSPS throughput supports a moderate control-loop update rate. The converter must be paired with careful analog conditioning, isolated return paths, and timing analysis that accounts for the full parallel-bus acquisition delay.

What is the conversion speed of the AD976AARSZ?
The AD976AARSZ converts at up to 200 kSPS with 16-bit resolution. According to the Analog Devices AD976A product page, the AD976A has a throughput rate of 200 kSPS, while the related AD976 operates at 100 kSPS. The part uses a successive-approximation, switched-capacitor conversion architecture and presents each converted sample through a parallel digital interface.
What is the AD976AARSZ and what type of ADC does it use?
The AD976AARSZ is a single-channel, 16-bit, 200 kSPS successive-approximation ADC from Analog Devices. It operates from a single 5 V supply, includes an internal 2.5 V reference, and provides a parallel output interface. The manufacturer identifies its BiCMOS construction as combining high-performance bipolar devices with CMOS transistors for high-speed mixed-signal operation.
Where can I download the AD976AARSZ datasheet PDF?
The official AD976A datasheet and product information are available on the Analog Devices product page at https://www.analog.com/en/products/ad976a.html. That page is the appropriate starting point for the pin description, electrical characteristics, timing diagrams, calibration information, and package drawings for the 28-pin SSOP device.
What is the AD976AARSZ pinout?
The AD976AARSZ uses a 28-pin SSOP arrangement that includes power, ground, analog input, internal-reference connections, and a 16-bit parallel data interface. Use the pin-description table and package drawing in the Analog Devices AD976A datasheet when assigning PCB nets. The exact numbering and signal labels should be taken from that document during schematic and layout review.
What is the difference between the AD976A and AD976?
The principal functional difference is throughput: the AD976A provides 200 kSPS, while the AD976 provides 100 kSPS. Both are described by Analog Devices as 16-bit, low-power, successive-approximation converters with an internal 2.5 V reference and parallel interface. A design requiring twice the sampling rate should therefore specify the AD976A family rather than the AD976.
Is the AD976AARSZ suitable for industrial control and instrumentation?
Yes, the AD976AARSZ is appropriate for industrial control, process monitoring, sensor acquisition, and laboratory instrumentation. Its 16-bit resolution provides 65,536 output codes, and the 200 kSPS throughput handles moderate-bandwidth analog signals. The single 5 V supply, internal 2.5 V reference, parallel interface, and low-power BiCMOS construction simplify many embedded acquisition designs.
Does the AD976AARSZ need an external voltage reference?
No. According to the Analog Devices product information, the AD976A contains an internal 2.5 V reference. This eliminates the need for an external precision reference in designs where the converter's factory-calibrated internal reference provides sufficient stability and accuracy. The analog input range, gain plan, and reference bypass recommendations should still be confirmed in the manufacturer datasheet.
How much power does the AD976AARSZ dissipate?
The Analog Devices AD976 and AD976A family information lists maximum dissipation of 100 mW. The AD976AARSZ runs from a single 5 V supply and is intended for low-power operation. Actual board-level dissipation depends on supply voltage, conversion activity, ambient temperature, and PCB thermal performance, so thermal margin should be checked in the final enclosure.
What can replace the AD976AARSZ?
The closest package-matched family alternative is the AD976ABRZ, which is also identified as a 16-bit, 5 V, 200 kSPS parallel-interface converter in a 28-pin SSOP. It provides the same core conversion rate, resolution, supply arrangement, and package footprint as the AD976AARSZ. Confirm temperature grade, calibration, availability, and exact ordering information against the Analog Devices datasheet before substitution.
Is the AD976ABRZ a drop-in replacement for the AD976AARSZ?
The AD976ABRZ is the closest identified drop-in candidate because it shares the 16-bit resolution, 200 kSPS throughput, single 5 V supply, internal 2.5 V reference, parallel interface, and 28-pin SSOP package with the AD976AARSZ. Final qualification should still verify operating-temperature range, device calibration, pin-level signal mapping, and procurement status in the current manufacturer documentation.
When should I choose the AD976AARSZ instead of a lower-rate ADC?
Choose the AD976AARSZ when a design needs 16-bit conversion data at up to 200 kSPS from a single 5 V supply and a parallel interface. A lower-rate ADC may be sufficient for slow sensor monitoring, but it can limit update rate, spectral coverage, and channel multiplexing flexibility. This part is also appropriate where an internal 2.5 V reference simplifies the analog supply architecture.
What are the key specifications of the AD976AARSZ?
The AD976AARSZ provides 16-bit resolution, one analog input channel, a maximum throughput of 200 kSPS, single 5 V operation, an internal 2.5 V reference, and a parallel output interface in a 28-pin SSOP package. Analog Devices also identifies the converter as a BiCMOS successive-approximation device with factory calibration. These specifications define its position as a moderate-speed precision acquisition converter.
How should the AD976AARSZ parallel output bus be routed?
Route the 16-bit parallel data bus as a controlled digital network with the acquisition logic or programmable logic device located close to the converter. Keep the analog input path away from high-current switching nodes and maintain a continuous ground reference beneath the interface. Use the manufacturer's timing diagrams to define data-valid setup and hold requirements at the receiving device.
Is the AD976AARSZ in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. The product is listed by multiple authorized supply channels, but inventory levels and lead time can vary by quantity and date. The form allows the current procurement position to be checked without relying on an outdated stock indication.
Where can I buy the AD976AARSZ at a current distributor price?
Use the Request a Quote form on this page to request the current AD976AARSZ price, stock position, and volume lead time. The converter is a specialized high-speed ADC and commercial availability can fluctuate with market demand. Submit the required quantity and target packaging so procurement can return an accurate quotation for the exact 28-pin SSOP ordering code.
Is the AD976AARSZ RoHS compliant?
The AD976AARSZ is identified as RoHS compliant in the product listing. Other environmental declarations, including REACH status, halogen-free designation, conflict-minerals status, and AEC-Q100 qualification, should be confirmed with Analog Devices for the exact ordering code. The converter is intended for industrial and commercial electronics rather than an automotive-qualified grade.

נתוני עזר הנדסיים עבור AD976AARSZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the AD976AARSZ when the design requires a 16-bit conversion rate of up to 200 kSPS from a single 5 V supply and can support a parallel digital interface. Its internal 2.5 V reference and factory-calibrated successive-approximation core simplify moderate-speed precision acquisition in industrial, instrumentation, communications, and control systems. The AD976ABRZ is the closest package-matched alternative identified for this device, offering the same core resolution, throughput, supply voltage, reference arrangement, interface style, and 28-pin SSOP footprint. Confirm temperature grade, calibration details, and ordering configuration before using it as a substitute. The lower-rate AD976 is not equivalent when the acquisition system depends on the full 200 kSPS update rate. A serial-interface ADC may be easier to route in a compact system, but it is not a pin-to-pin substitute for this parallel-output converter.

השוואה עם חלופות

פרמטר מוצר זה AD976ABRZ
Package 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices
Resolution 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS
Number of Channels 1 channel 1 channel
Supply Voltage 5 V 5 V
Internal Reference 2.5 V 2.5 V
Output Interface Parallel Parallel
Conversion Architecture Successive approximation Successive approximation
Maximum Power Dissipation 100 mW for the AD976/AD976A family 100 mW for the AD976/AD976A family

מבדילים עיקריים

  • Higher conversion rate within the AD976 family (לעומתAD976)
  • Single 5 V supply with an integrated reference (לעומתAD976ABRZ)
  • Direct parallel data acquisition (לעומתSerial-interface ADCs)

הערות תכנון

Separate the analog input network from the 16-bit parallel output bus and any switching-power circuitry. Place the converter's local bypass capacitors at the associated power and reference pins, and provide a continuous return path under the device where the package construction permits. Review the manufacturer datasheet for the recommended input, reference, and digital-interface layout before releasing the PCB.

Treat the parallel output as a timing-sensitive digital interface. Route the 16 data lines with consistent geometry to the receiving logic, keep clock and data skew within the limits shown in the datasheet, and avoid stubs or unnecessary vias. Validate data-valid setup and hold timing at the receiver rather than assuming that the nominal converter delay is sufficient.

Confirm the analog input range, common-mode requirements, and gain arrangement before applying a sensor signal. The internal 2.5 V reference simplifies the design, but it does not remove the need to observe input-swing limits and reference bypass recommendations. Also verify that the receiving logic and board connector support the full 16-bit width; missing two data lines can create a plausible but incorrect waveform.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance is identified in the product listing. Other environmental and automotive declarations require confirmation from Analog Devices for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

AD976AARSZ datasheet AD976AARSZ pinout AD976AARSZ specifications AD976AARSZ price AD976AARSZ stock Analog Devices AD976AARSZ AD976A 16 bit 200 kSPS ADC AD976AARSZ 28 pin SSOP AD976AARSZ equivalent AD976AARSZ replacement AD976AARSZ vs AD976ABRZ AD976AARSZ cross reference AD976AARSZ industrial control ADC AD976AARSZ single 5V supply converter

רכיבים ומונחים קשורים

Analog Devices AD976AARSZ AD976A AD976ABRZ AD976 analog-to-digital converter ADC successive-approximation ADC switched-capacitor ADC parallel output interface 16-bit resolution 200 kSPS throughput single 5 V supply internal 2.5 V reference BiCMOS process factory calibration 28-pin SSOP surface-mount package RoHS industrial process control sensor acquisition laboratory instrumentation communications receiver waveform capture power and motor control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר