ADF4117BRUZ-RL7 - 1.2 GHz RF PLL Synthesizer | Analog Devices
MPN: ADF4117BRUZ-RL7 ✓ פעילADF4117BRUZ-RL7 סקירה
A frequency synthesizer is a clock-and-timing integrated circuit that generates a stable, programmable output frequency from a reference signal. In the hierarchy of electronic components, the ADF4117 belongs to the clock generator and phase-locked-loop family, where a phase-locked loop compares a divided feedback signal with the divided reference signal. The charge pump drives the tuning voltage of a voltage-controlled oscillator, allowing integer and fractional division ratios to determine the output frequency.
The ADF4117 family's key features include a 1.2 GHz maximum RF input frequency, programmable A and B counters, programmable reference division, a precision charge pump, and a dual-modulus prescaler. These features allow the device to implement a local oscillator in RF up-conversion and down-conversion paths. The 16-pin TSSOP package supports compact surface-mount layouts while providing separate connections for reference, feedback, charge-pump output, digital programming, and power.
Technically, the synthesizer derives its output from a stable external reference through cascaded programmable dividers. The prescaler divides the RF feedback signal, while the A and B counters determine the required division ratio and reference divider establishes the comparison frequency. Correct lock behavior depends on stable reference routing, proper loop-filter design, controlled charge-pump current, and separation of sensitive analog and high-speed RF paths.
Typical applications include wireless receiver local oscillators, transmitter up-conversion chains, RF down-conversion stages, instrumentation equipment, and communication modules. The part is particularly relevant when a compact, programmable RF clock source is required within a 1.2 GHz operating envelope. Designers must also evaluate the external voltage-controlled oscillator, loop-filter components, reference quality, and required lock time.
For PCB implementation, place the reference and RF input paths on controlled-impedance routing and keep feedback traces away from charge-pump and digital programming nets. Use stable reference and loop-filter components, provide local bypass capacitance at the supply pins, and verify the external VCO tuning range before programming the synthesizer counters. These practices reduce phase-noise degradation, reference pulling, and acquisition-time variation.
This product page combines the exact ADF4117BRUZ-RL7 package information with practical guidance for RF layout, loop-filter implementation, local-oscillator design, and firmware programming. It also identifies documented same-footprint alternatives and highlights the parameter checks required when changing the device without modifying the PCB.
חלופות תחליף ישיר עבור ADF4117BRUZ-RL7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ADF4117BRUZ-RL7 (אותו גורם צורה וטביעת רגל) — שונים ב B Counter, Package, A Counter, Charge Pump, Prescaler.
ADF4116BRUZ
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADF4118BRUZ
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←ADF4117BRUZ-RL7 מפרטים
| Product Type | RF clock/frequency synthesizer IC |
| Maximum RF Frequency | 1.2 GHz |
| Reference Input Frequency Range | 100 MHz to 300 MHz |
| Example Output Frequency | 200 MHz |
| Architecture | Single-channel integer-N PLL frequency synthesizer |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| Reference Divider | Programmable |
| A Counter | Programmable 5-bit counter |
| B Counter | Programmable counter |
| Prescaler | Programmable dual-modulus P/P+1 prescaler |
| מארז | 16-pin TSSOP, 0.173 inch (4.40 mm) body width |
| סוג הרכבה | Surface mount |
| Programming Interface | Serial digital programming |
מדריך תצורת פינים של ADF4117BRUZ-RL7 16-pin tssop, 0.173 inch (4.40 mm) body width
תצורת פינים עבור ADF4117BRUZ-RL7 (מארזת 16-pin tssop, 0.173 inch (4.40 mm) body width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ADF4117BRUZ-RL7.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ADF4117BRUZ-RL7 מתאים עבור 6 יישוםs: Wireless Receiver Local Oscillator, RF Transmitter Up-Conversion, RF Down-Conversion Mixer, Instrumentation RF Signal Source, RF Communication Module, Industrial RF Test Equipment.
Wireless Receiver Local Oscillator
The ADF4117BRUZ-RL7 fits a wireless receiver local-oscillator block when the required feedback frequency can operate below the family's 1.2 GHz maximum. The low-noise digital phase-frequency detector compares the divided reference with the divided RF feedback, while the precision charge pump drives an external loop filter and voltage-controlled oscillator. Programmable A and B counters, reference division, and the dual-modulus P/P+1 prescaler provide flexible division-ratio generation. Designers should calculate the complete integer-N ratio and verify counter compatibility before programming the device.
מומלץ
RF Transmitter Up-Conversion
In a transmitter up-conversion chain, the ADF4117BRUZ-RL7 can generate a programmable local oscillator for a mixer or quadrature modulator. Its 1.2 GHz maximum RF frequency covers a broad range of wireless and instrumentation bands, while the programmable divider chain permits precise selection of the feedback division ratio. The precision charge pump and low-noise phase-frequency detector support a controlled tuning loop. Board implementation should minimize phase-noise contributions through short RF routes, a clean charge-pump connection, and a carefully selected loop filter.
מומלץ
RF Down-Conversion Mixer
The ADF4117BRUZ-RL7 can supply the programmable local oscillator used by an RF down-conversion mixer. By dividing the feedback signal with the prescaler and A/B counters, the PLL establishes the oscillator frequency required to translate a received RF channel to a lower intermediate frequency. This arrangement is useful in wireless receivers, test equipment, and communication modules. The external VCO must cover the required tuning range, and the reference and loop-filter components should be selected for the desired lock time and phase-noise performance.
מומלץ
Instrumentation RF Signal Source
For instrumentation that requires a tunable RF reference, the ADF4117BRUZ-RL7 combines programmable frequency division with a 1.2 GHz operating envelope. It can form the synthesizer section of a compact signal source when paired with an external voltage-controlled oscillator and reference oscillator. Programmable A and B counters and the dual-modulus prescaler support multiple channel plans, while the 16-pin TSSOP package simplifies compact surface-mount construction. Accurate output quality still depends on the reference source, VCO tuning range, loop-filter design, and RF shielding.
מומלץ
RF Communication Module
The ADF4117BRUZ-RL7 is suitable for compact communication modules requiring a programmable RF local oscillator rather than a fixed-frequency source. Its single-channel PLL architecture supports programmable reference division and dual-modulus RF feedback division, allowing the same synthesizer approach to serve multiple product variants. The 16-pin TSSOP package is appropriate for high-density surface-mount boards, but RF performance depends on controlled-impedance routing and isolation from digital control signals. Firmware should validate every prescaler and counter combination before enabling the RF output.
מומלץ
Industrial RF Test Equipment
Industrial RF test equipment can use the ADF4117BRUZ-RL7 to create a programmable local-oscillator signal for mixer, receiver, and filter characterization. The device's 1.2 GHz maximum frequency supports many common RF test bands, and the programmable divider chain allows the instrument to change channel plans without redesigning the synthesizer hardware. A low-noise reference and carefully isolated RF layout are essential for repeatable measurements. The external loop filter should be tailored to the required step size, settling time, and close-in phase-noise target.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ADF4117BRUZ-RL7 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ADF4116BRUZ | ADF4118BRUZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) |
| Product Type | RF clock/frequency synthesizer IC | RF clock/frequency synthesizer IC | RF clock/frequency synthesizer IC |
| Phase-Frequency Detector | Low-noise digital PFD | Low-noise digital PFD | Low-noise digital PFD |
| Charge Pump | Precision charge pump | Precision charge pump | Precision charge pump |
| Counter Organization | Programmable A and B counters | Programmable A and B counters | Programmable A and B counters |
| Prescaler | Programmable dual-modulus P/P+1 prescaler | Programmable dual-modulus P/P+1 prescaler | Programmable dual-modulus P/P+1 prescaler |
| Reference Divider | Programmable | Programmable | Programmable |
| Programming Interface | Serial digital programming | Serial digital programming | Serial digital programming |
מבדילים עיקריים
- Broad RF tuning envelope in a compact package (לעומתADF4118BRUZ)
- Programmable dual-modulus feedback division (לעומתADF4116BRUZ)
- Low-noise digital phase detection with precision charge pump (לעומתADF4116BRUZ)
הערות תכנון
Keep the reference input and RF feedback routes short, continuous, and referenced to a stable ground plane. Route the charge-pump output directly to the loop-filter components because long or resistive traces can degrade phase noise and loop stability. Keep digital programming nets away from the reference, RF feedback, and charge-pump paths. Use via stitching where appropriate to maintain a low-impedance return path beneath high-frequency signals.
Do not treat every ADF411x order code as an unconditional substitute. Before replacing the ADF4117BRUZ-RL7, compare maximum RF frequency, supply limits, pin functions, counter widths, prescaler options, register addresses, lock-status behavior, and temperature grade. Firmware must be updated or revalidated for the selected device, and the complete frequency plan must be checked to ensure that the programmed integer-N ratio is valid.
Place the device's supply bypass capacitors immediately adjacent to the relevant power and ground pins, following the pin table and recommended-layout material in the manufacturer datasheet. Provide a low-impedance ground return for the charge pump and digital section, and decouple any separately filtered analog supply where the pinout permits it. Verify settling time at power-up before enabling sensitive downstream RF circuits.
Design the loop filter around the selected VCO gain, tuning range, phase detector gain, charge-pump current, reference frequency, and required lock time. Calculate the complete feedback division ratio from the prescaler and A/B counter settings rather than entering the target frequency alone. After assembly, verify reference lock, VCO tuning range, output phase noise, spurious levels, and recovery after a reference or RF-feedback disturbance.
מידע על תאימות
No specific environmental or automotive compliance declaration appears in the cited product-page snippets. Confirm the current compliance statements and ordering information with Analog Devices before production release.