Analog Devices

ADF4118BRUZ-RL7 - 3 GHz RF PLL Synthesizer | Analog Devices

MPN: ADF4118BRUZ-RL7 ✓ פעיל
16-lead TSSOP, 4.40 mm width Package 3 GHz Speed
כמות הזמנה מינימלית: 1 |

ADF4118BRUZ-RL7 סקירה

Analog Devices ADF4118BRUZ-RL7 is a single-channel RF frequency synthesizer with a 3 GHz maximum operating frequency, housed in a 16-lead TSSOP package measuring 4.40 mm wide. The device integrates a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 5-bit A and B counters, and a dual-modulus P/P+1 prescaler. It is designed to generate the local-oscillator signal required by wireless receiver and transmitter up-conversion and down-conversion paths.

A frequency synthesizer is a phase-locked-loop, or PLL, component that locks an output frequency to a stable reference. In the ADF4118, the programmable dividers and counters determine how the phase-frequency detector compares the divided feedback signal with the reference. When the feedback and reference agree, the charge pump corrects the output until the loop reaches lock. This architecture provides programmable RF output for communication equipment while requiring an external reference, loop filter, voltage-controlled oscillator, and RF output network.

The ADF4118 family's principal features include a 3 GHz operating ceiling, one synthesizer channel, a digital phase-frequency detector, a precision charge pump, and programmable reference, A-counter, and B-counter functions. The dual-modulus prescaler supports fractional-N synthesis techniques by allowing the programmable counters to represent ratios that cannot be produced through integer division alone. The low-noise phase-frequency detector helps establish low phase noise in the synthesized output, while the charge pump controls loop current and correction behavior.

The ADF4118BRUZ-RL7 is differentiated by its 16-lead TSSOP surface-mount package and the -RL7 production configuration. The package is suitable for automated assembly and compact RF modules. As with any high-frequency PLL, performance depends on the external reference source, loop filter, voltage-controlled oscillator, power-supply layout, and impedance-matched PCB traces. The datasheet's application and pin-description tables should govern the final reference design rather than assumptions based only on the family-level architecture.

Typical uses include wireless receiver and transmitter local oscillators, up-converters and down-converters, RF instrumentation, communication transceivers, and frequency-generation modules. The synthesizer can support programmable channels where one reference drives multiple selectable output frequencies. Component selection should include the required output range, reference frequency, prescaler range, channel spacing, phase-noise target, tuning bandwidth, and regulatory requirements for the finished equipment.

Keep the reference and feedback routes short and impedance controlled, and place the loop-filter components near the relevant device pins. Use a clean, well-decoupled supply because supply ripple can degrade phase noise and spur performance. A careful grounding strategy and short RF output path are equally important; the digital programming interface and sensitive RF nodes should not share uncontrolled return-current paths.

This product page combines the manufacturer architecture and package information with practical PLL design guidance, verified source links, and a conservative review of replacement options. It helps engineers identify the correct ADF4118 configuration, distinguish true drop-in devices from packaging-only variants, and plan RF layout, loop-filter implementation, sourcing, and qualification.

חלופות תחליף ישיר עבור ADF4118BRUZ-RL7 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם ADF4118BRUZ-RL7 (אותו גורם צורה וטביעת רגל) — שונים ב A Counter, B Counter, Charge Pump, Package, Prescaler.

Analog Devices
A Counter: Programmable
B Counter: Programmable
Charge Pump: Precision charge pump
השווה עם ADF4118BRUZ-RL7 →

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

ADF4118BRUZ-RL7 מפרטים

Device Type Single-channel RF PLL frequency synthesizer
Maximum Operating Frequency 3 GHz
Output Channels 1 channel
Phase-Frequency Detector 1 digital low-noise PFD
Charge Pump 1 precision charge pump
A Counter 5-bit programmable counter
B Counter 5-bit programmable counter
Prescaler Dual-modulus P/P+1 prescaler
Reference Divider Programmable
מארז 16-lead TSSOP, 4.40 mm width
Package Width 4.40 mm
Package Body Width 0.173 inch
סוג הרכבה Surface mount

מדריך תצורת פינים של ADF4118BRUZ-RL7 0.173 inch

תצורת פינים עבור ADF4118BRUZ-RL7 (מארזת 0.173 inch). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 0.173 inch עבור ADF4118BRUZ-RL7

אין נתוני פריסת פינים מפורטים עבור ADF4118BRUZ-RL7.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

ADF4118BRUZ-RL7 מתאים עבור 6 יישוםs: Wireless Receiver Local Oscillator, RF Transmitter Up-Converter, RF Down-Converter Local Oscillator, Programmable RF Signal Source, RF Communication Module, RF Instrumentation Front End.

🌐

Wireless Receiver Local Oscillator

The ADF4118BRUZ-RL7 fits a wireless receiver local-oscillator block because its phase-locked-loop architecture can divide a stable reference into a programmable RF output, with operation extending to 3 GHz. The 5-bit A and B counters, programmable reference divider, and dual-modulus P/P+1 prescaler support flexible channel-ratio generation. The synthesizer is paired with an external VCO and loop filter, so final phase noise, spur performance, and lock time depend on those components as well as the reference source. Use short, controlled feedback and RF routes and follow the manufacturer layout guidance to minimize added noise and phase error.

📡

RF Transmitter Up-Converter

In an RF transmitter up-converter, the ADF4118BRUZ-RL7 can generate the programmable local-oscillator reference used by a mixer to translate information from an intermediate frequency toward the transmit band. Its 3 GHz ceiling and programmable divider and counter architecture allow the synthesizer to support multiple transmit frequencies from one reference. The external VCO must cover the desired band and provide suitable tuning gain and phase noise, while the loop filter must meet both locking-time and spur requirements. PCB planning should isolate the VCO and output-matching network from digital control traces and switching supply return paths.

🌐

RF Down-Converter Local Oscillator

The ADF4118BRUZ-RL7 is applicable to the down-conversion local oscillator in wireless receivers, instrumentation, and communication equipment operating below its 3 GHz ceiling. It uses the programmable reference divider, 5-bit A and B counters, and dual-modulus prescaler to establish the required feedback ratio between the external VCO and the system reference. Because the synthesizer does not contain the VCO itself, design teams must verify tuning range, gain, and noise performance in the selected oscillator. The loop filter and layout should be evaluated together to prevent excessive ripple, poor lock behavior, or degraded adjacent-channel performance.

📻

Programmable RF Signal Source

The ADF4118BRUZ-RL7 can serve as the synthesis core of a programmable RF signal source when a stable reference, external VCO, and suitable loop filter are available. Its single channel provides a straightforward way to obtain one selectable RF output while supporting programmable division ratios through the counter and prescaler architecture. This arrangement is useful for bench equipment and communication test modules that require controlled frequency selection. Component selection should account for the reference frequency, allowed prescaler ratios, desired tuning resolution, and output range. The 16-lead TSSOP package also supports compact, automated assembly without changing the general surface-mount implementation approach.

📱

RF Communication Module

The ADF4118BRUZ-RL7 fits compact RF communication modules requiring a programmable local oscillator with an operating ceiling of 3 GHz. Its phase-frequency detector, precision charge pump, programmable reference divider, counters, and dual-modulus prescaler support flexible synthesis ratios from a shared reference. The part is particularly useful when a module must cover several transmit or receive channels rather than using a fixed oscillator. The external VCO remains essential, and the complete implementation should verify lock range, temperature behavior, phase noise, and supply rejection. Compact construction also demands careful ground-plane continuity and controlled impedance around the RF output path.

🖥️

RF Instrumentation Front End

The ADF4118BRUZ-RL7 can support programmable local-oscillator generation in RF instrumentation front ends operating within the 3 GHz range. Using a common reference and programmable feedback ratios allows measurement equipment to select different test frequencies while preserving phase coherence between channels. The reference divider, 5-bit counters, and dual-modulus prescaler make the synthesizer suitable for flexible ratio generation, although exact channel resolution must be confirmed from the device limits. Measurement accuracy also depends on reference purity and VCO performance, so the design should avoid coupling switching-converter noise into the reference or RF supply paths.

What is the ADF4118BRUZ-RL7?
The ADF4118BRUZ-RL7 is a single-channel RF PLL frequency synthesizer rated to 3 GHz and packaged in a 16-lead TSSOP. According to the Analog Devices ADF4116/ADF4117/ADF4118 datasheet, it combines a digital phase-frequency detector, precision charge pump, programmable reference divider, 5-bit A and B counters, and a dual-modulus P/P+1 prescaler. It is intended primarily for programmable local oscillators in wireless receiver and transmitter up-conversion and down-conversion circuits.
Where can I download the ADF4118BRUZ-RL7 datasheet PDF?
The official ADF4118BRUZ-RL7 datasheet PDF is available through the Analog Devices product page and the combined ADF4116/ADF4117/ADF4118 datasheet link on this page. The manufacturer document is the authoritative source for the complete pin-description table, electrical characteristics, register map, reference-divider limits, prescaler ranges, phase-noise graphs, and application circuits. Use that document when assigning PCB tracks and selecting external loop-filter and RF-network components.
Where is the pinout for the ADF4118BRUZ-RL7?
The ADF4118BRUZ-RL7 pinout is published in the pin-description section of the Analog Devices ADF4116/ADF4117/ADF4118 datasheet and on the official ADF4118 product page. The device uses a 16-lead TSSOP package. Follow the manufacturer's numbering and pin-function table when programming the synthesizer, connecting the reference and feedback paths, placing the charge-pump and loop-filter network, and assigning supply and ground pins.
What are the key specifications engineers should know about ADF4118BRUZ-RL7?
The ADF4118BRUZ-RL7 combines a 3 GHz maximum operating frequency with one RF synthesizer channel in a 16-lead TSSOP package. Its phase-locked-loop architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, 5-bit A and B counters, and a dual-modulus P/P+1 prescaler. These features make it applicable to programmable wireless local oscillators, up-converters, down-converters, and RF communication modules.
What is the difference between ADF4118BRUZ-RL7 and ADF4118BRUZ-RL?
ADF4118BRUZ-RL7 and ADF4118BRUZ-RL identify different orderable configurations of the ADF4118, and their exact commercial and qualification terms should be checked against the Analog Devices ordering information. They should not be treated as automatically interchangeable merely because both use the BRUZ family designation. When changing an approved BOM, compare the complete ordering code, package form, temperature grade, and every parameter in the manufacturer datasheet before releasing the design.
Can ADF4107BRUZ replace ADF4118BRUZ-RL7?
The ADF4107BRUZ should not be treated as a confirmed drop-in replacement for the ADF4118BRUZ-RL7 merely because both are listed in 16-lead TSSOP packages. The available comparison information expressly notes that pin functions and internal architecture can differ between the product families. A valid replacement requires a manufacturer-datasheet pin-by-pin comparison plus verification of maximum RF frequency, prescaler ratios, reference input, counter widths, programming interface, and electrical limits.
When should I choose ADF4118BRUZ-RL7 over ADF4107BRUZ?
Choose the ADF4118BRUZ-RL7 when the design specifically targets its 3 GHz RF operating range and the surrounding system has been designed around its counter, prescaler, programming, and pin functions. Consider the ADF4107BRUZ only after its datasheet confirms that every required pin function and operating parameter is compatible with the existing PCB. Matching package dimensions alone is not sufficient because frequency-synthesizer families can retain the same TSSOP outline while using different internal architectures.
Is ADF4118BRUZ-RL7 suitable for wireless transceiver local oscillators?
Yes, the ADF4118BRUZ-RL7 is specifically suited to programmable local-oscillator generation in wireless receiver and transmitter up-conversion and down-conversion sections. The 3 GHz operating ceiling supports RF designs within that range, while the programmable reference divider, A and B counters, and dual-modulus prescaler provide flexible frequency-ratio synthesis. Actual channel spacing, tuning range, phase noise, spur performance, and lock behavior also depend on the reference and external VCO.
What external components does the ADF4118BRUZ-RL7 require?
The ADF4118BRUZ-RL7 requires a stable reference source, an external voltage-controlled oscillator, a loop-filter network, and suitable RF routing to implement a practical frequency synthesizer. The manufacturer datasheet also provides guidance for bypassing supplies and interfacing the digital programming signals. Component values must be calculated from the intended reference frequency, target output frequency, VCO gain, prescaler mode, charge-pump current, loop bandwidth, and required phase-noise performance.
What is the best drop-in replacement for ADF4118BRUZ-RL7?
No drop-in replacement for the ADF4118BRUZ-RL7 is established by the available cross-reference information. The ADF4107BRUZ shares a 16-lead TSSOP format, but the comparison source warns that pin functions and internal architecture may differ, so it cannot be classified as a true drop-in part. A valid replacement must be confirmed against the Analog Devices pinout and electrical tables; packaging-only variants should not be listed merely to increase the number of candidates.
Where can I buy ADF4118BRUZ-RL7 online?
Use the Request a Quote form on this page to request ADF4118BRUZ-RL7 availability, current lead time, minimum order quantity, and shipment packaging. The form is the appropriate purchasing path because inventory and commercial terms can change quickly. Include the exact ADF4118BRUZ-RL7 ordering code and the required reel or cut-tape format when submitting the request to avoid confusion with related ADF4118 configurations.
What is the price of ADF4118BRUZ-RL7?
Current ADF4118BRUZ-RL7 pricing depends on quantity, package form, inventory, and order schedule. Submit the exact MPN through the Request a Quote form on this page for a current quotation and production lead time. The structured offer on this page is updated independently of the technical content, so the form provides the most appropriate route for obtaining an actionable price for the required quantity.
What is the lead time for ADF4118BRUZ-RL7?
The current lead time should be confirmed through the Request a Quote form on this page by entering the exact ADF4118BRUZ-RL7 MPN, order quantity, and shipment format. Lead time can vary with factory inventory, manufacturing allocation, and order size. For production planning, request the earliest delivery estimate and include the date by which the complete shipment must be available.
Is ADF4118BRUZ-RL7 in stock?
Stock availability for the exact ADF4118BRUZ-RL7 configuration should be checked through the Request a Quote form on this page. Provide the quantity and required reel or cut-tape packaging so the response reflects the correct orderable configuration. Related ADF4118 order codes may have different assembly or temperature-grade conditions and should not be substituted without an approved BOM change.
How should the ADF4118BRUZ-RL7 RF layout be designed?
Route the reference, feedback, charge-pump, and RF output paths as short and controlled as practical, following the Analog Devices ADF4116/ADF4117/ADF4118 datasheet layout guidance. Place loop-filter components near the relevant pins, keep sensitive RF nodes away from digital programming traces, provide clean supply bypassing, and maintain a continuous ground reference. Trace width and impedance must be selected from the PCB stack-up and the required RF impedance rather than copied without calculation.
Does the ADF4118BRUZ-RL7 contain an RF oscillator?
The ADF4118BRUZ-RL7 is a PLL frequency synthesizer that requires an external voltage-controlled oscillator to complete the feedback loop. Its internal elements are the phase-frequency detector, charge pump, programmable dividers, counters, and prescaler. The external VCO, loop filter, reference source, and matching network determine much of the final tuning range, output power, phase noise, lock behavior, and channel spacing.

נתוני עזר הנדסיים עבור ADF4118BRUZ-RL7 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Select the ADF4118BRUZ-RL7 when the design requires a single-channel Analog Devices PLL frequency synthesizer with operation up to 3 GHz and the board has been laid out around its documented pins and programming interface. It is appropriate for wireless local oscillators, RF up-converters and down-converters, communication modules, and instrumentation. An external VCO, loop filter, reference, and RF network remain mandatory. The ADF4107BRUZ can be evaluated for related synthesizer designs, but it is not a confirmed drop-in replacement because a common 16-lead TSSOP outline does not guarantee compatible pin functions or RF limits. Packaging-only order-code variants should be selected only for commercial or qualification requirements, not presented as different functional solutions. Before release, verify operating frequency, reference range, prescaler ratios, counter widths, electrical limits, thermal conditions, and every PCB connection against the manufacturer datasheet.

השוואה עם חלופות

פרמטר מוצר זה
Package 16-lead TSSOP, 4.40 mm width
Brand Analog Devices
Product Type Single-channel RF PLL frequency synthesizer
Maximum Operating Frequency 3 GHz
Phase-Frequency Detector Low-noise digital PFD
Charge Pump Precision charge pump
Counter Width 5-bit A and B counters
Prescaler Dual-modulus P/P+1
Reference Divider Programmable

מבדילים עיקריים

  • Higher supported operating frequency than the related ADF4107 family (לעומתADF4107BRUZ)
  • Clear RF-synthesizer feature set (לעומתADF4107BRUZ)
  • Compact automated-assembly package (לעומתADF4107BRUZ)

הערות תכנון

Follow the Analog Devices ADF4116/ADF4117/ADF4118 datasheet layout guidance for the reference, feedback, charge-pump, supply, and RF connections. Keep sensitive paths short, preserve a continuous ground plane, and place loop-filter components close to their associated pins. Determine controlled-impedance dimensions from the PCB stack-up and target RF impedance. Do not use the shared TSSOP outline as proof that a board can replace one PLL family with another without checking every pin function.

Decouple each supply connection at the device with the capacitance and routing specified by the manufacturer. Because phase noise and reference suppression can be affected by supply ripple, use a stable reference source and prevent switching-converter return current from crossing the sensitive RF and PLL areas. If the product option provides multiple supply domains, observe the sequencing and voltage limits in the datasheet rather than assuming that all pins have identical requirements.

Do not treat ADF4118 order codes that differ only by packaging or suffix as engineering alternatives without checking the ordering table and qualification details. Likewise, a same-package PLL from another family may have different counter widths, prescaler ranges, reference limits, programming registers, or pin assignments. For every proposed substitution, perform a pin-by-pin and parameter-by-parameter comparison against the original ADF4118BRUZ-RL7 datasheet before approving the change.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes require confirmation from the current Analog Devices product documentation or material declaration for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ADF4118BRUZ-RL7 datasheet ADF4118BRUZ-RL7 datasheet pdf ADF4118BRUZ-RL7 pinout ADF4118BRUZ-RL7 equivalent ADF4118BRUZ-RL7 replacement ADF4118BRUZ-RL7 cross reference ADF4118BRUZ-RL7 price ADF4118BRUZ-RL7 stock ADF4118BRUZ-RL7 footprint ADF4118 3GHz PLL synthesizer Analog Devices ADF4118BRUZ-RL7 ADF4118BRUZ-RL7 vs ADF4107BRUZ

רכיבים ומונחים קשורים

Analog Devices ADF4118BRUZ-RL7 ADF4118 ADF4107BRUZ frequency synthesizer phase-locked loop PLL local oscillator digital phase-frequency detector PFD precision charge pump programmable reference divider 5-bit A counter 5-bit B counter dual-modulus prescaler P/P+1 prescaler fractional-N synthesis voltage-controlled oscillator VCO loop filter 16-lead TSSOP TSSOP package surface-mount package wireless receiver wireless transmitter
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר